I can't start windows, it says system32\config\system is damaged or missing I tried consol recovery and boot to the top of the cd

Similar Questions

• Windows/system32/config/system files damaged or missing

  Original title: need help with recovery baddly

  "When my computer starts, he says" corrupted or missing windows/system32/config/system file and start the installation "or something, so I put in the xp recovery disk and I don't know how to recover cmd with remove them my files help me please I don't know what to type in, I don't want to lose all my files

  Thank you

  Hello armanfa,

  Knowing the error that you receive and watch the article provided by David, I recommend that you follow the article by Santosh:

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Best regards

  Matthew_Ha

• Windows\System32\Config\System is corrupted or missing

  I restarted Windows XP Home edition using the software/operating system installation CD.
  I deleted everything and started again and when the Setup is finished, she has restarted.
  Then the message "windows\system32\config\system is corrupted or missing" came and said it should be repaired in the recovery console.

  Boot from the Windows XP CD and go to Recovery Console - follow this document to do http://support.microsoft.com/kb/307654

  Go to the command prompt.

  Then change to the C: by typing C: and press ENTER.

  Then type CD\SYSTEM VOLUME INFORMATION and press enter

  Then type DIR /AH and press enter (this will show you a directories even if they are hidden directories)

  This will show a few directories... one in particular starts with the name of directory being _RESTORE {there is a long series of random letters and it ends by}

  Type CD _restore {then the random set of letters, dashes and numbers in the directory list of the above command and ending by the}, and then press ENTER.

  Then type dir and press to enter.

  It will show you a bunch of directories that begin with RP - something like RP1366.

  Look at the last entry in directory PR.  If IE RP1366... then look for a couple of directory entries...

  Type CD RP1364 to some directory of restore point that is relevant to your directory entry.  Just don't do the last restore point directory - I would go back 2 or 3 directories restore point.

  Then type DIR /AD and press enter

  Should display a directory called SNAPSHOT

  Then type CD SNAPSHOT

  Then type DIR and press enter

  You should see a few files but two in particular.

  _REGISTRY_MACHINE_SYSTEM
  _REGISTRY_MACHINE_SOFTWARE

  Type COPY _REGISTRY_MACHINE_SYSTEM C:\windows\system32\config\system and press enter
  Then type COPY _REGISTRY_MACHINE_SOFTWARE c:\windows\system32\config\software and press enter

  Then restart your PC and see if you can connect.

• Windows\System32\Config\System is corrupted or missing from WinXP Pro

  I can't start Windows Xp Pro. I get the following error message:

  Windows\System32\Config\System is corrupted or missing. How can I fix the problem?

  Hello krazykat9999,

  We get this error when you are either unable to see the registry of the system hive or he is actually corrupt.

  To remedy this, we need a Windows XP CD.  If you do not have a Windows XP CD you can borrow one from a friend for repair purposes.  If we are unable to get the CD anyway, there is another process that we can use.  Please let us know and we will send you this information as well if necessary.

  To boot into the recovery console, use the following article:
  Description of the Windows XP Recovery Console for advanced users

  Once connected, use the chkdsk command to check the disk for errors.
  This will be a certain amount of time and should not be interrupted:

  CHKDSK C:/p

  Again, this will take some time to complete.

  If this does not work, please see the following article to get back to a backup copy of the registry:
  How do I recover from a corrupted registry that prevents Windows XP startup

  Let us know if you have any questions about it.

  Best regards
  Matthew_Ha

• \windows\system32\config\system... Missing or corrupt - need help!

  It shows "\windows\system32\config\system...missing or damaged" when I start the laptop. "

  He said that to use the windows recovery console, but my laptop is 10 ", so it does not come with a CD-ROM.

  then I tried to use windows PE (preinstallation environment) system startup via USB driver enter to solve the problem, but when it's loading system, after a few seconds it stop loading. so, I can not in windows PE.    don't know why, that might happen.

  someone knows how to fix this?

  Please help me with this.

  I would never start with KB307545 for this problem, have never used KB307545 to resolve this issue and will never suggest KB307545 to solve this problem.  It's really bad advice.

  KB307545 is the first thing to come into the Bing search engine for the error, but that doesn't make it the right thing to do.

  The problem likely is the file system is corrupt and XP just can not find the file to load.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes pulling and buttons power)

  These can cause corruption in the file system that must be fixed before you do anything
  on the other.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to start try to copy files to a hard drive that has a corrupted file system, so this must be first using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  You don't need a Windows XP disk to run chkdsk/r either (or implement KB307545), but you have to start on something.

  Do you your system of unspecified and model do not have a CD/DVD drive, or you do not have a Windows installation CD or both?

  You have a working CD/DVD drive or not?

  Your system is able to boot from a USB device?

  If your mini system has no CD-ROM drive (many minis don't) and even if you had a Windows CD, it would be of no use, you reference to KB307545 is therefore still less logical.

  @Imran: technician of technical support:

  Have you ever actually fixed this problem before?

  You have ideas that are possible?

  Why don't you take your system to work, get the XP running and then pull the plug on this subject.  Repeat this about 5 - 10 times and then you will be recreated the problem and you can actually see.

  Then, don't use is not a Windows XP installation CD, fix the system afflicted and then offer this solution as an answer instead of the first Microsoft KB article that appears in a search engine Bing.

• Windows\System32\Config\System is corrupted or missing error

  system32 error
  my ex is to get the windows\system32\config\system missing or damaged error. Unfortunately, she only has more his original cd, can I download a boot disk or recovery disk or whatever it is? The computer won't past this screen. As a side note, I have a student XP Pro installation disc, but it will not even read that.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  If the system works, what do you think might have changed since the last time it did not work properly?

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Windows\System32\Config\System is corrupted or missing 0xc00000e9

  original title: 0xc00000e9

  OK, I have an ibm think purchased cushion of opportunity he has been cleared, then reformatted with windows xp professional, he crashed hard last week then my son he has reinstalled with windows vista Home premium, that it crashed yesterday with this message that is damaged or missing. I do not have the disk that came with it to restart and everytime I try to do, he comes back and says windows\system32\config\system missing or coruppted is there a way I can down load a free disk and burn it to a recordable disc?

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• cannot access windows\system32\config\system file to retrieve

  Hi all, my problem was a common originally, my XP computer would not start as it says that the file \windows\system32\config\system is damaged or missing. I tried the 3 steps to recovery according to the instructions, but already in the first stage, I had the following problem: I could not copy the SYSTEM TMP file, it does not, and I get a message that the file is not accessible, even if I can see it in the CONFIG DIR. Nor could then delete the file, I get the message "the falied to delete operation. So as a result, I can't open the CONFIG folder to be able to put the "new" SYSTEM repair file Then of course as a result I can't go to step 2 (safe mode) because I keep getting the error about the missing or damaged file SYSTEM.

  So in summary: I can see the SYSTEM file in the config folder, dated a few days ago. But I can't make them disappear to put in the place of repair file SYSTEM safe mode and access.

  Does anyone have a solution for this? Thank you

  I see.

  All too well since KB307545 normally should be attempted If chkdsk /r does not solve the problem.
  I'll look into your question. But in the meantime, boot from the CD and rerun the Recovery Console. When you get the C:\ prompt, type the following
  Chkdsk /r
  then press the Enter key (there is a space before the slash).
  You may find that chkdsk /r is all you need to do to fix your problem. Let us know!

• I recived the windows\system32\config\system damaged or missing error today

  I got the windows\system32\config\system error damaged or missing today and do the chkdsk c:/r on it and he said: "The Volume appears to contain one or more unrecoverable problems"... is it still fixable or have I just lost my HD?

  I can't do a cause of model, that I built it 2 years ago.
  I run windows xp professional, service Pack3, all updates
  I use spybot, avg, windows defender and malwarebytes
  Caused the computer to restart 4 times and I didn't know it until it was too late cause we had electricians turning the power on/off and I didn't know my computer kept on again and restart.
  I have a cdrom to work and I still have the xp cd.

  Note: I tried to do a repair of windows, go to the Setup screen. But there was no repair to the screen only option how much space is free, if I wanted to install or delete a partition. I have nothing just to the left.

  If chkdsk does not resolve your hard drive, then you will need in the end not completely reformat your hard drive and reinstall Windows.  Before doing so, however, you must save as much data as you can to an external USB hard drive.  If your system boots, then save as much as the hard drive will allow.  If your system does not start, then you should try to boot from a bootable CD that will support USB drives (I prefer free Linux Livecd such as Knoppix), then again until you can.

  To reinstall Windows, many computers have a recovery Partition that will restore your computer to its State as purchaser which can be activated by pressing a combination of keys special at the time where the manufacturer splash screen goes back to the start.  Read quickly, find the appropriate key combination and press it to reinstall Windows - well in your case, it seems that you have an installation CD.  If the request to do a 'Quick format' or 'Regular Format', do not select Quick format.

  HTH,
  JW

• Does not start Equim A60 - system is damaged or missing

  Hi, is there anyone who can help me to save my data I had on my laptop Equium A60. The system displays this message when I boot it "WINDOWS\SYSTEM32\CONFIG\SYSTEM" IS DAMAGED or MISSING. I got my disk to RESTORE but it clealy invite, a warning message that all my data would be lost for the default setting is installed. I will definitely use this disc, but before that I need my data. Please also note that Windows XP is running on my system.

  The problem occurred when I installed the drivers for a BLUETOOTH dongle. The installation was perfect but when I rebooted my windows the above error msg appears and I can't get into windows. I used the F8 key and tried all the option here but none of them worked and I took them to the same message.

  I would appreciate if someone can help me in this matter.

  THANKS AND BYE - ads

  Hello Adnan,

  There is unfortunately no way to load your operating system with the error you describe. As you have already discovered it does not load even in 'SAFE' mode

  This means that you only options for recovery are: -.

  1 reinstall the recovery CDs (which will lose all your data during the re-form)

  2 try to recover the situation by using a Microsoft Installation CD authentic (by using the Recovery Console)

  3 remove the hard drive from your laptop and screw (with a USB caddy) to another PC so that you can
  Retrieve your data befor using option 1 above.

  Option 3 would probably be your best way to recover and would mean that you would not lose your data.

  I also recommend that you invest in a proper backup strategy (possibly drive external hard USB and a utility such as Norton Ghost or Acronis True Image) so that you can protect your system from such incidents in the future.

  Kind regards

• Problems starting Windows XP. I get "the following file is missing or damaged. \WINDOWS\SYSTEM32\CONFIG\SYSTEM"message.

  Original title: start windows xp questions

  Windows xp. When I try to start the system I get the message "the following file is missing or damaged. \WINDOWS\SYSTEM32\CONFIG\SYSTEM... I have an xp disk and code but not sure if it is the origanal. When I start the computer, it does not start the windows xp disc.

  If you get the message hal.dll missing, your system is still booting from the hard drive and do not boot from the XP Recovery Console CD (I hope that you have created).

  There is no hal.dll on the CD you made if all goes well.

  You must enter the BIOS of your system and make the first boot from the CD to your Pcakard device Bell looks like it firstly, instead to focus first on the HARD drive (make the drive the second choice for now).

  Searching the Internet, I found a message that says to enter the Packard Bell BIOS you must do this:

  Users of Packard Bell, you can access the BIOS set up by pressing the keys F1, F2 or del

  I don't have a PB, so I can't say for sure if that works, or what to do after that - you will need to look around the BIOS for things like the boot order boot priority, etc. and make the CD drive the first choice, second choice HARD drive, save the settings, then you can boot from the CD I hope that you have made using these instructions.

  Generally when the system detects a CD is inserted, it will sell you a message like this:

  Press any key to boot from CD...

  Then all the button and follow the rest of the instructions...

• My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please?

  The file is missing or corrupt is one of your files in the system registry.

  By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD.
  Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
  Hirens CD burning <> http://www.hirensbootcd.org/burning/ >

  Once you create the CD, and then start your system of problem with this CD.  In the first window, select "Mini Windows XP" and wait for the system to start.  When it starts, go to the Hirens Boot CD menu and select
  Register-> Registry Restore Wizard.
  then follow the prompts.  This wizard will return a copy of your registry database from backups that are stored with your system restore points.  After the restoration, stop, remove the CD and restart.

  When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system
  "How to restore Windows XP to a previous state"
     <>http://support.Microsoft.com/kb/306084 >

  Also, this error is almost always accompanied, if not caused, the corruption of the file system.  Also a good idea to perform a check disk (chkdsk) operation with the option "repair".
  "How to perform disk error in Windows XP check"
     <>http://support.Microsoft.com/kb/315265 >

  The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console)

  "How do I recover from a corrupted registry that prevents Windows XP boot"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW

• When I start my computer I get a message that says that the file &#60; root windows &#62; \system32\hal.dll. is damaged or missing.

  file HAL.dll

  When I start my computer I get a message that says that the file \system32\hal.dll. is damaged or missing. Please reinstall a copy of the file. I have the original Windows XP CD and I tried to re - install, but it will not go beyond the implementation of window. I can't sign in to windows. How can I reintall this file?

  It's extremely likely that you will need to replace the hal.dll and since there are seven files on the XP installation CD that will extend into hal.dll, which would you choose?  It depends on your hardware, but it is extremely likely that the problem (did I already say that?).  I've never had to replace a file hal.dll for this problem.

  The real problem is most likely that XP just can not find the file because of a file system corruption or a file c:\boot.ini afflicted.

  For this error, I would always be first boot from the XP Recovery Console and sometimes run a chkdsk-r that will fix things right to the top.

  If the chkdsk /r is clean and you have the same problem, and then re-create your c:\boot.ini file but rename the old one first so you don't build on top of those afflicted - this tidbit is absent from MS KB article that assumes too.

  You can do all this in the XP Recovery Console, but do go through these methods in this article and see how you go.

  For example, method 1 will not work if your system does not start.  You may have more luck with other "methods".

  If that doesn't work, then I suggest to provide a little more information about your system:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a real installation CD bootable XP which is the same Service Pack as your installed Service Pack? (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

• Windows can't start because\windows\system32\config\system is missing

  original title; Windows cannot start because\windows\system32\config\system

  I did a system restore, and when he went to restart blue screen came to say windows didn't start because he would cause damage. Then I went to Advanced menu and it does not start even with safe mode. but it says that \windows\system32\config\system\ is missing... Help, please

  Hi jerijenks,

  · What is the number and the model of the computer?

  · The operating system comes preinstalled on the computer?

  · What is the service pack installed?

  · Why were you running system restore?

  See: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

  With regard to:

  Samhrutha G S - Microsoft technical support.

• can I fix this error - \windows\system32\config\system

  my daughter has a compaq mini netbook... start says file is missing or damaged - \windows\system32\config\system he says that you can attempt to repair by starting windows configured using the original installation CD. I have not... How can I fix?

  Hi Tyler

  You cannot download Windows Xp. However, you can try to repair your current installation by using the Recovery Console. Download the recovery from HEREConsole. Unzip the folder choose Extract the iso file to your desktop for convenience. Click HERE for the instructions to burn the iso image. You need to a blank cd. Once you've burned the image, you will need to boot from the cd.

  1. Insert the CD from Recovery Console in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD. (Usually the message will be "Press any key to boot from cd")
     
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
     
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
     
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
     
  5. at the Recovery Console prompt, type the following lines, pressing ENTER after you type each line: each line must be typed exactly as it appears below.

  MD tmp

  copy c:\windows\system32\config\system c:\windows\tmp\system.bak

  copy c:\windows\system32\config\software c:\windows\tmp\software.bak

  Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak

  copy c:\windows\system32\config\security c:\windows\tmp\security.bak

  copy c:\windows\system32\config\default c:\windows\tmp\default.bak

  delete c:\windows\system32\config\system

  delete c:\windows\system32\config\software

  Delete c:\windows\system32\config\sam

  delete c:\windows\system32\config\security

  Delete c:\windows\system32\config\default

  Copy c:\windows\repair\system c:\windows\system32\config\system

  copy c:\windows\repair\software c:\windows\system32\config\software

  copy c:\windows\repair\sam c:\windows\system32\config\sam

  Copy c:\windows\repair\security c:\windows\system32\config\security

  Copy c:\windows\repair\default c:\windows\system32\config\default

  Type exit to quit the Recovery Console. Your computer will restart

  Kind regards
  Chauvet J.