Can the amount of memory/RAM I put in my HP Compaq 8710p running Windows 7 64 bit?

Similar Questions

• How check installed RAM memory and check the amount of memory RAM is consumed

  Original title: RAM used

  Is there a way I can check not just the RAM installed but used the rest of the memory used please what are the steps on the computer?

  Thank you

  Hello

  If I understand correctly you want to know how to check how much RAM is installed on your computer, as well as the way you want to check the amount of RAM memory is consumed by the computer. I will certainly help you with information.

  To check the amount of RAM installed, I suggest you follow the steps:

  • Click Start.
  • Right-click on computer and select Properties.
  • In the window system, under System properties, see installed memory (RAM) to the memory installed on your computer.

  To check the memory consumed by each program you can check by following the steps below:

  1. Open the Task Manager.
  2. On the performance tab, click on Resource Monitor.
  3. Under the resource monitor , you should be able to see the memory consumed by each program.

  

  To check the memory usage, see at the bottom of the Task Manager in the status bar where it says physical memory: xx %

  Hope the above information helps. Please keep us updated with the status of the issue to help you further.

• Computer laptop Compaq PresarioCQ40 using Windows 7 32 bit. In Device Manager, I found two items with a trademark right Exclaimation beside 'Devices Bluetooth device' in the other devices section.

  My laptop Compaq PresarioCQ40 running Windows 7 32-bit. In Device Manager, I found two items with a trademark right Exclaimation beside 'Devices Bluetooth device' in the other devices section. Properties, I found that these two elements with problem are found on "Microsoft Bluetooth enumerator.  I tried to run Windows update to get the driver but it says no update available. And I can't find this driver online. Can someone help me solve this problem? Thank you very much

  Hello

  Perform the steps in the link and check.

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Hope this information helps.

• What is the amount of memory (live ram) required to run windows 10

  What is recommended the amount of memory (live ram) required to run windows 10

  System requirements:

  * 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor

  1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

  * 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  * Peripheral figure DirectX 9 with WDDM 1.0 or higher driver

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• How to get the amount of memory installed?

  (It's under the Windows operating system)

  I have do a comparative analysis program for the performance statistics for some complex calculations based on the hardware.

  What is the best way to get the amount of RAM installed programmatically?

  How do I know if the OS is 32 or 64 bit?

  Thank you!

  Well, it does not resemble the Memstats VI returns the memory installed. It returns a number, but I can't match the amount of memory installed on my system. The GetCurrentPlatform seems to return only the name of the OS, not whether 32-bit or 64-bit. I see nothing in the App-> target list containing this information. At least to 8.2. Did not check in 2009.

  Altenbach says:

  (It's under the Windows operating system)

  I have do a comparative analysis program for the performance statistics for some complex calculations based on the hardware.

  What is the best way to get the amount of RAM installed programmatically?

  How do I know if the OS is 32 or 64 bit?

  Thank you!

  Define "better". Best in speed? Better compatibility on multiple versions of the Windows operating system? Best in terms of access to this information without having to delve too in all sorts of types of data Windows and DLLs?

  Would you consider .NET stand for the 'best '. If so, the amount of RAM installed can be gained from easily using the Microsoft.VisualBasic.Devices.ComputerInfo class:

  

  To determine whether your OS is 32 - bit or 64 - bit are you trying to make a distinction between a 32 bit on a 64-bit CPU vs OS a 64 bits on 64-bit OS? I know that the WMI class can be used to obtain this information, so if you try to make this distinction, you could watch the Win32_ComputerSystem and Win32_Processor classes. For example, I think that what follows is what you would see:

  OS 64-bit on x64processor:
  Win32_ComputerSystem.systemType = pc x 64
  Win32_Processor.addresswidth = 64
  Win32_Processor.architecture = 9
  Win32_Processor.DataWidth = 64

  32 bit on x86processor OS:
  Win32_ComputerSystem.systemType = x 86 pc
  Win32_Processor.addresswidth = 32
  Win32_Processor.architecture = 0
  Win32_Processor.DataWidth = 32

  OS 32 bit on x64processor:
  Win32_ComputerSystem.systemType = x 86 pc
  Win32_Processor.addresswidth = 32
  Win32_Processor.architecture = 9
  Win32_Processor. DataWidth = 64

  I've attached an example on how to access the classes with .NET. Not pretty, but not too bad either.

• How to determine the amount of memory shipped on the PXI-5114

  How to determine the amount of memory onboard, I have on my PXI-5114?

  Thanks in advance.

  Hello

  I'm sorry I didn't know you already had the map.  There is a property for NO-Scope node to determine the total amount of available memory that we can then divide down to get the memory available per channel.  Please see the vi and help below:

  

  This gives a shot, just drop it in a VI that you use and if it should return your memory cards.  If you don't have a LabVIEW I can probably retrieve the purchased version by querying your serial number.

  Kind regards

  Kyle S

• How to determine the amount of memory on the PXI-5124

  Can I determine the amount of memory on the PXI-5124 visually? I don't see a reference as 778757-02 on the map.

  Hello axiomtest,

  There are two stickers on the back of the card (including one with a barcode) and the other without.  The part number is that without the bar code and from there, you can search your memory option on our Web site.  If there is no sticker on the card, which looks like yours have been removed, then use this example of community in LabVIEW to determine the size of your card.

  Kind regards

• (Redirected) Alienware Aurora R3 / water damage / the amount of memory has changed... Problem

  Hi all

  Last night, I spilled water on top of my alienware desktop computer. I quickly shutdown, unplugged and held head down for awhile. First time I turned it back on, it gave me the "amount of memory has changed, but none has been added" problem. I went through system troubleshoot (F5 I think) and had everything to the point where it asks if you want to continue for 30 minutes. I skipped that and restarted. Second time I turned on my computer, it loaded all regularly, logged into my account, desktop screen with files, etc. Then he went straight to the screen of closing and began to beep, in the explosion of two. Whenever I try to start, stuck to the error page "the amount of memory" with two beeps.

  I tried a few searches and it seems it could be a motherboard problem, I'm not sure. I would like to email technical support, but it seems impossible without active coverage? (Mine is is no longer active).

  My question is, is it sounds like a problem of motherboard and if so, how can I replace it in my office? Where to get the part, etc.

  Thank you for your useful answers.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• How to increase the amount of memory to the host system?

  Hello gentlemen,

  I am new to VMware ESXi 5, and I want to know how to increase the amount of memory for the host system?

  I saw in the Configuration menu of the host, my ESXi host has only 77.3 MB. I think it's wrong, it's too little amount of memory dedicated to the host system. It is not a (Properties) button after I was able to change the amount of memory host system.

  Please, be so kind, help me!

  Thanks in advance!

  Welcome to the community,

  where do you see this amount of memory?

  The total amount of memory installed on the host can be seen in the summary, tab (resources) with the host country is selected in the inventory.

  André

• How to determine the amount of memory was my pci-6115?

  How to determine the amount of memory was my pci-6115?

  I see two beaches of memory OR max.

  My PCI-6115 there 32 or 64 MB memory?

  Range of memory between 1: FE9F7000-FE9F7FFF

  Range of memory between 2: FE9F7800-FE9F8FFF

  It's an old part number for the Board 32 MB.

  -Christina

• The amount of memory actually are used? db_32k_cache_size

  Hello world
  
  Using Oracle 10 g on RHEL 5.3.
  
  I was invited to check the amount of memory actually used by our db cache. Currently, we use the parameters db_32k_cache_size (defined by the user) and db_8k_cache_size (default), both allocated with 12 GB. Now I want to know if it is possible to find how on the 12 GB are actually used by the cache.
  
  Is this possible?
  
  Thank you

  make you view tips help available in oracle.
  V$ SGA_TARGET_ADVICE
  V$ DB_CACHE_ADVICE

• Can I update to 10 32-bit of Windows if I run Windows 7Pro 64-bit?

  I trust currently some fairly old legacy 16-bit software and I can run on 7 Pro x 64 with XPMode - a bit of a pain, but it is essential software, so I do what I do...

  I had someone test install and it works on their Windows 10... they have x 64 processor and run x 86 windows 10... other than having to change the default installation locations, it works very well.

  My question is, if I have a 64-bit version of Windows 7 Pro installed on my laptop, when I'll update Windows 10, can I choose to install a 32-bit version?  And if I can't, will x 64 run 16-bit software?

  Help!

  Can I update to 10 32-bit of Windows if I run Windows 7Pro 64-bit?

  No, at least not directly.  To do this (to change your number of bits), you need to wipe your drive and reinstall the new type-bit Windows you want.  But you also have to do the upgrade directly from Windows 7, if you want Windows 10 to be free.  So, here's what to do:

  1. be sure to save all the files you want to keep and have your ready installers for your additional programs, you'll want to install again.

  2 - pass from 7 to 10.  You will stay on 64-bit.

  3 activate Windows so that he knows that this computer is allowed for the 10 free.

  4 - Download the Windows 10 Installer to a port USB or CD and use it to clean install 10 Windows (32 bit this time)

  Another option would be to retain the 64-bit, but start your 16-bit on a Hyper-v virtual machine software.  Best of both worlds and you will have to use more memory since 64-bit allows you to use more than about 3 GB of RAM.

• Can I install a 1 GB video card and still be able to run Windows Vista?

  Original title: need information about my os/graphics card...
  Hello! I have a problem with my gfx
  I want to buy a new video card in my computer. I am running Windows Vista 32-bit, and here is the 'problem '.
  I currently have 3 GB of RAM installed and according to this link: http://support.microsoft.com/kb/929605/en-us Vista is limited to 3.12 GB. If I had to buy a new video card with 1 GB of memory, this memory limit for Windows Vista to use for other programs to 2 GB and Vista would be still able to use the / 3GB for other tasks and then the 1 extra GB for video work?
  Thank you!

  Video RAM is separate, but some cards also use the system to 'boost' memory capacity.  You cal telll them because they will say memory share as apposed to discreet.

• Cannot CS4 update on the new laptop running Windows 7 64 bit

  I just upgraded a laptop slow 2 years running Vista 32-bit to a new laptop Asus G73JW running under Windows 7 64-bit. It's a laptop very fast with 8G of RAM, 1.5 GB dedicated graphics card, res HD full 1920 x 1080-player in solid state for the use of a disk etc. It's a beast of a laptop that starts completely in 10 seconds approximately and it was built for HD players. Needless to say I'm pretty excited to be able to work on my favorite Adobe software, which is mostly Photoshop and Premiere Pro.

  All about the laptop works fine but... I installed my CS4 Production Premium without issue, however, the Adobe update will not work. I tried about 10 times now, reboot, try various programs to try updates etc, nothing works. They are updated very important, because the software will not properly work in several programs without the updates. I can't find anything on this specific issue, someone has had this problem with Windows 7 64 bit?

  FYI, everything has worked with Vista 32 bit, including updates.

  I'm quite frustrated now and I just want to start using the software, and I would really appreciate any suggestions that anyone can have.

  I already have an e-mail in Asus to see if the latest NVidia GTX 460 M driver graphics card can be updated on my system. There are a few other drivers that I try to update as well to see if that will help.

  Thank you in advance,

  Aaron

  I built my computer, I installed Win7 Pro 64-bit as the only user and I still have an option "Run as Administrator" when I right click on an EXE file

  You do not have this option that makes me think that something on your installation is corrupt

• Cannot run windows 7 64 bit, but the computer is capable.

  I ordered the online download of windows 7 64 bit by accident.  My computer is capable of running windows 7 64-bit, however, I'm currently running vista 32 bit.  Is there a way can I return my order online for the 32 bit, or do I have to download the 64-bit version and has two operating systems on my computer?

  We are dealing with Windows Update features in this forum, not the upgrade of Windows. Transfer your question here http://social.answers.microsoft.com/Forums/en-US/w7install/threads or contact Support MS. ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft