Can we all define the difference of hard and soft analysis the analysis

Similar Questions

• Can we (re) define the colorbox for any 16-bit output?

  Dear users,

  can we (re) define the colorbox for any 16-bit output? Currently, the colobox out U32.

  See you soon,.

  
  

• 8 comps with 8 users, how can we all have the same fonts?

  InDesign CC 11.1.0.122 running x 64 build on 8 compositions with 8 users, how can we all have the same fonts?

  It is a very good use for Typekit fonts. If you use all the CC of InDesign, you are all allowed to them for use.

  If you send a document to a team member who has not downloaded the police, it is automatically synchronized on their computer.

• How to set up the hard and soft limit to the/etc/Project Help for Clusterware

  Please advise on how to set up/etc/Project to set the appropriate Hard and Soft limit on files for Oracle Clusterware 11 GR 2 what Solaris 10 installation.
  
  What is the command line to set limits of Hard/Soft to/etc/Project file for the Oracle software owner? Thank you

  Hello

  Please advise on how to set up/etc/Project to set the appropriate Hard and Soft limit on files for Oracle Clusterware 11 GR 2 what Solaris 10 installation.

  What is the command line to set limits of Hard/Soft to/etc/Project file for the Oracle software owner? Thank you

  Consult the kernel configuration settings and swap space link below

  http://www.oraclemasters.in/?p=974

  Thank you
  A H E E R X

• I can install all programs on a separate hard drive to install Windows 7?

  I have Windows 7 Ultimate and have been installing my programs on the C: drive. However, it is only 40 GB so I ordered a new drive and I was wondering if I could uninstall all my programs and re - install on the second disc, I would encounter problems such as file search programs in the hard drive? I have looked at other responses, but do not understand etc. extended partitions

  Hello

  Bad audio is not an uncommon problem in Windows 7. Try this for your audio problem:

  http://windows.microsoft.com/en-in/windows7/how-do-i-stop-my-music-from-skipping-or-breaking-up-when-i-play-it .

  Let me know if this fixes that issue for you.

  The default installation directory, although you can change, all default Windows programs will be always need to reside in C:\Program Files and Program Files (x 86). You would be better to do a clean install with Windows and your programs to the new larger capacity disk and keeping the smaller disk to your audio and video files.

  Kind regards

  BearPup

  P.S. I would increase the pagefile to 6144 (1.5 times the amount of RAM). Or you could try a 16 GB for the ReadyBoost flash drive. See the following article: http://www.bleepingcomputer.com/tutorials/using-windows-readyboost-to-increase-performance/ .

• Race weight between the hard and soft lines?

  IM an ellipse with a race drawing 1px. If I change the race to the hard line the result is horribly pixelated, but if I use the sweet line the restult is too broad (it seems thicker than the straight line of 1px). Is their way to achieve something in the meantime maing the soft line or thinner than the default 1px setting?

  Thank you

  It affects only the soft lines, making them a little harder or softer.

• Hard Vs soft analysis analysis

  Hi all

  Suppose I execute a SQL query, once it is executed it will get in the Shared pool.

  Second time when I run the same query, that query will be in the shared pool. This second query execution time will not need of optimization and generate explain to new plan. It will use explain the plan used in the first execution of the query.

  Now, suppose that the plan of the explain command used is not plan optimal and before you run the second query times I created some indexes on the tables used in the query and the indexes can improve the performance of queries.

  Is it good or bad?

  Optimizer generates plan still even in the analysis of soft or not?

  OR

  Soft and hard parsing analysis differed only in terms of "Load the code in the Shared Pool", rest steps are the same for Parse Soft and Hard Parse Optimzer run and find plan even in the analysis of Soft?

  Two posts on hard Parse Soft Parse confusion:

  http://www.DBA-Oracle.com/t_hard_vs_soft_parse_parsing.htm

  https://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:2588723819082

  There are significant errors in this text, for example:

  QUOTE

  1. Loading in shared pool - SQL source code is loaded into RAM for parsing. (the analysis stage 'hard')
  2. ,,,
  3. ...
  4. Transformation of the query - Oracle will transform complex SQL in simpler forms, equivalent and replace the aggregations by materialized views, as the case may be. In earlier versions of Oracle the query_rewrite = true parameter should be defined for the rewriting of the materialized view.
  5. Optimization - Oracle, and then creates an execution plan, based on the statistics of your schema (or perhaps with 10 g dynamic sampling statistics).  Oracle has build costs decision tree during this period, by choosing the track with the cost lowest perceived.
  6. ...

  What is the difference between a hard and a soft analysis in Oracle?  Just the first step, step 1 as shown in red above.  In other words, a soft analysis does not require a reload shared pool (and associated allocation of RAM memory).

  ENDQUOTE

  This is wrong - or, at best, very wrong.

  The CRITICISM of 'hard' analysis, is that an implementation plan should be created for the instruction; that the statement must be optimized.  (In a modern version of Oracle, passing bly, query processing is not a discrete step that precedes the optimization). If the session can take the advantage of doing a 'mild' analysis, it means it didn't optimize instruction.

  Concerning

  Jonathan Lewis

• How can I customize the new firefox so I can see all of the HTML "title tag"? Its sky partially obscured in this new version.

  I am a webmaster/work in site development and need to see the FULL "title tag" or the browser title to each of the pages I visit. It is now partially hidden and I have to "view source" (the source html code) in order to see the FULL title tag. Before it was completely visible; now, I see only a small part of it. How should I do if I can see the whole thing? I can't drag the tab bar to make it bigger.

  I don't speak of this < title > ask a Question | Support Mozilla < /title >; some some pages title tags are much longer and obscured now in this new version of Mozilla. I need to see the full thing! Help, please!

  Method 1
  
  Simply hover the mouse over the tab until the ToolTip appears.

  Method 2

  1. Right-click on a zone empty of the tab bar and select Customize.
  2. Click the button on the title bar in the lower left corner to activate the title bar.
  3. Click the Customize output button when finished.

• Urgent please help: How can I find on what fills my hard drive?

  My drive C guard fills, and I don't know why.  Yesterday, I removed more than 40 GB of files and delete a lot more (I emptied the Recycle Bin).  In the last 4 hours, filled an another 30 GB and I'm now in the red zone (5 GB in the last twenty minutes!).  I only kept a very small Word document on the hard drive.

  It only started past recently, in the last two weeks or more.  I am on Windows Vista and I have McAfee.  I recently completed a full scan and nothing significant has come.

  I have only 5 GB on my C drive on the left, and there is nothing more that I can remove it.  How can I find out what does this and how do I that to solve this problem?

  Any emergency assistance will be greatly appreciated!

  Thank you.

  Free disk space
  Last updated 18/01/2014
   

  Content

  • To see how much space you have used and free
  • To see where the files are too much space
  • Disk Cleanup
  • System restore
  • Fix the basket
  • Fix temporary Internet files
  • Delete files in the system and the folder Temp of Service Profiles
  • Check the size of the swap file
  • Disable the hibernation
  • Compact the Windows databases use various
  • Delete the files updated by the Service Pack
  • Move your Documents
  • Remove saved files created by Photo Gallery
  • Which extends the size of the disk
  • Compress files
  • Turn off the low disk space warnings
  • Boost disk cleanup
   

  To see how much space you have used and free

  Start - All Programs - Accessories- Click with the right button on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  For the system drive

  WMIC volume where (DriveLetter = '% lecteur_systeme %') are legend, capacity, freespace List

  For all readers

  WMIC volume get/all, freespace, the ability, the legend

  If you want to store this info on your desktop

  WMIC /append:"%userprofile%\desktop\Free on disk space" volume get Caption, freespace format:htable

  To open double click on Free Disk Space on your desk or type

  Start "" "%userprofile%\desktop\Free report.HTML of disk space.

  Then come back here after cleaning and repeat these commands to see the difference.

  If for any reason, the wmic command does not work, use these two commands. Both take a lot of time.

  % Lecteur_systeme % - one defrag

  or

  dir %systemdrive%\*.*/a/s

   
  To see where the files are too much space
   
  It lists the number of files and the size of the folders on your drive. Each command is a subset, so you can run it better.
   
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
   
  Then configure the command prompt. Right-click on the tab of the titlebar - Properties - Layout command prompt - and enter 1000 screen buffer size height and 43 (or 50) to Window Dimensions height. Change the color (color tab) and the police (police tab), if you want.
   
  To see the size of the folders in Documents, excluding images, video, or music files.
   

  for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Personal"")

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "\/"^|findstr/l/v "photos video" ') @echo %j & echo. "

   
  To see the size of the folders in the music.
   

  for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My music' ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the image files.

   

  for /f "Skip = 2 tokens = 4" %A in (' Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" "My pictures" /v ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the files in the video.

   

  for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My videos' ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the files on the desktop.

   

  for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Desktop"")

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

  To see the size of the files in the Windows folder.

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("'%windir%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   
  To see the size of the files in the Program Files folder.

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("'%ProgramFiles%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

   

  Disk Cleanup
  To run Disk Cleanup, normal is to click with the right button on the drive in my computer (Start menu - computer), then Properties - general tab - Disk Cleanup button.
   
   
  Another way is menu Start - All Programs - Accessories - System - Disk Cleanup tools.
   
  Disk Cleanup can be started from the command line.
   

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   
  To make your primary drive.
   

  cleanmgr letter

   
  Choose which lead to do.
   

  Cleanmgr

   
  See the last section of this post to see how to performance of disk cleanup.

   System restore

  With disk cleanup displays above the Other Options tab. You can delete all but the last System Restore point and see if that is too much space.

  System Restore uses 15% of the space normally. Change click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit and navigate to

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg

  Double click on DiskPercent and click on decimal and change the value to the desired percentage,

  You can change the command prompt.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the size of the system restore folder.

  You don't normally have access to this folder. You will need to take possession, allow administrators to permission, then the size of the query.

  takeown /f "%systemdrive%\System Volume Information" / a r d y

  ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

  dir "%systemdrive%\System Volume Information" / a/s

  To see the current percentage

  Reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent

  It is in hexadecimal. The numbers are 0-9 and a-f. So 0xf is 15. 0x5 is 5, 0 x 9 is 9, 0xa is 10, 0 x 14 is 20.

  To set a different value.

  You can use decimal values to set. This affects 10% (in bold in the example and the last item in the line).

  Tracking Add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent /t REG_DWORD /f /d 10

   
  To repair the system restore, file delete and restart the system restore.
    

  SC stop vss

  takeown /f "%systemdrive%\System Volume Information" / a r d y

  ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

  e "%systemdrive%\System Volume Information" / q/s

  SC start vss

  Fix the basket

  Sometimes, files get lost in the trash. Remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.

  Empty the trash.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the size of the files in the Recycle Bin

  It must have one or no files inside if you work. There should be a directory (folder) by user.

  dir % systemdrive%\$RECYCLE. BIN\ *. * /a /s

  To reset the trash

  e % systemdrive%\$RECYCLE. BIN/s/q

  Fix temporary Internet files

  Sometimes, files get lost in the temporary internet files folder. Delete the files. It will be automatically recreated the next time download you. It will remove the current user only.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the temporary internet files size empty files folder

  RunDll32.exe InetCpl.cpl, ClearMyTracksByProcess 8

  dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» "*" '%userprofile%\AppData\Local\Microsoft\Internet Explorer\DOMStore\*.*' / a/s

  Then delete.

  Close Internet Explorer and the Explorer first. Some files may not remove at the moment, they can be deleted later.

  "%userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files" del /s /q

  also the DOM store, similar to TIF.

  "%userprofile%\AppData\Local\Microsoft\Internet Explorer\DOMStore" del /s /q

  So to see the new size.

  dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» "*" '%userprofile%\AppData\Local\Microsoft\Internet Explorer\DOMStore\*.*' / a/s

   
  To see the size of the cache, type the following
   

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  Reg query /v "Settings\5.0\Cache\Content Software" CacheLimit valid

  Use the calculator to convert hexadecimal into decimal. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter the value returned above. Menu display - decimal. To convert windows units divide by 1024 for kilobytes, divide by 1024 megabytes.
   
  Located between 50 MB and 250 MB. You can use decimal here. The unit is expressed in kilobytes. Here it is 250 megabytes (250 000 x 1024 bytes)
   

  Add tracking 'Software Settings\5.0\Cache\Content' v CacheLimit valid /t Reg_DWord /d 250000 f
  

    

  Delete files in the system and the folder Temp of Service Profiles

  The system temp folder is only used when no one connects. It is rarely used but never cleaned. Some services have their own temporary folder which is also cleaned.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To the list

  dir c:\windows\temp C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp/a/s

  To remove

  del C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\*.* C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp\*.* c:\windows\temp\*.*/s/f/q

  Check the size of the swap file

  As a rule generally you want to your swap file slightly larger than the amount of memory that you have. It develops automatically but spread automatically. If you use hungery memory programs as this video editing should be bigger. If too big you can reduce and rush of space can be moved to another drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see what was your use

  WMIC pagefile get List

  To see the size of the file on disk

  dir /a c:\pagefile.sys

  To change the size or change the road see change the size of virtual memory in Start - Help and Support.

   

  Disable the hibernation

  The file shows up is the same size of installed memory. If this is not the case, turn off the computer in hibernation and save a lot of disk space.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see if it is on

  If the file will be found. If off the file won't be there.

  dir %systemdrive%\hiberfil.sys /a

  To turn off

  powercfg-h off

  Make a u-turn

  powercfg-h on

  Compact the Windows databases use various

  You can compact the various databases that Windows uses. This is the Windows Update, Windows Search, and certificates of security, Windows Mail, Windows Contacts, Windows, Windows Live and Internet Explorer ver 10 applications calendar.

  Close Windows Mail and Internet Explorer. Wait a minute for Internet Explorer release locks of sound files.

  See how much space taking up type which is below and note the total size (because it scrolls away).

  Start - All Programs - Accessories- Click with the right button on command prompt and choose Run As Administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

  Then at compact

  SC stop wuauserv

  stop bits SC

  SC stop wsearch

  SC stop cryptsvc

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /p "%A" / o

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /d "%A".

  SC start cryptsvc

  SC start wsearch

  SC start bits

  SC start wuauserv

  Then to delete some temporary files.

  del c:\*.integ.raw c:\TEMPDFRG*.edb/s

  To see the new size and compare it to the old size

  dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

  If a program has a file open, you can use this procedure to find out which program.

  openfiles/local on

  Reset

  openfiles/query /v | findstr /i "WebCacheV [0-9] *------catdb \.edb \.msmessagestore .dat".

  Delete the files updated by the Service Pack

  See how much space taking up type which is below and note the total size (because it scrolls away). Also, note that the total is higher than it actually is.

  This will remove the ability to uninstall service packs.

  According to the service pack that Windows was provided with you can have both, one or none of these two files.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  dir /a /s c:\Windows\WinSxS

  Then type

  Vsp1cln.exe

  COMPCLN.exe

  To see the new size and compare it to the old size

   

  c:\windows\WinSxS dir /a /s

  Move your Documents

  If you have another disk, you can move the documents folder to it.

  Click with the right button on your Documents (or pictures, etc.) Office, videos, Contacts,) the tab file - Properties - location - move.

   

  Delete the thumbnail and icon Caches

  These files can contain thumbnails or icons of files deleted a long time ago. The files will be recreated if necessary.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste). The desktop and the start menu will disappear briefly.

  To see the size

  dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

  then remove

  Taskkill /im explorer.exe/f
  attrib - r s h '% userprofile%\AppData\Local\*.db '.
  attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.
  del "% userprofile%\AppData\Local\*.db".
  del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".
  Explorer

  to check the new size

  dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

   

  Remove saved files created by Photo Gallery

   

  Photo Gallery Windows makes a copy of any file that you are editing. Click Start - All Programs - Accessories - (or press the Windows key + R). Type

  Images of the hull: original

  Delete the ones you don't want.

  Which extends the size of the disk

  If all the space on the disk has not all been used it is possible to extend your drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  DiskPart

  then type

  Select the c volume:

  Then type to see in size

  the list volume

  then (it will work if possible or not as appropriate)

  extend

  type to display the new size

  the list volume

  then type exit

  output

  If you want advice on the extension of the partition type the following and paste the result back

  DiskPart

  list disk

  the list volume

  Select disk 0

  partition from the list

  Select disk 1

  partition from the list

  output

  To copy the final text right click in the window - Mark , then select the text and press enter.
   

  Compress files

  There are two ways to compress files in windows. Zip files and built-in file compression. It's built-in file compression. For more information on compression type zip in Start - Help and Support .

  Photos, music and video are already compressed. They can get larger if Windows tries to compress it any further. Also usually a bad idea to compress system files.

  If you have files of worksheet they can very well be compressed. If you have files, installation files, they can also be good candidates. Web pages are also good candidates.

  In Windows Explorer, blue file names means Tablet (it is the file system compression not aka zip files compressed files). Green filename means Encrypted.

  To disable file names colored, in Explorer - Tools menu (Alt + T)- display tab and then clear the check box for Show encrypted or compressed NTFS in color .

  Windows compression, encryption and security to work for the most part by applying attributes to a folder and the files in the folder inherit the folder.

  If you have all the files appropriate for compression, find them in solution, made Explorer right click - Properties - general -Advanced button tab - Compress contents to save disk space. Choose to apply to all files and folders when asked.

  To use a command line to compress the files in the Favorites folder.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  compact/c /s:"%userprofile%\Favorites." *

  Put in Favorites to compress files added

  compact/c /s:"%userprofile%\Favorites.

  To view the details of the compression of the Favorites folder

  Compact '% userprofile%\Favorites\*.* '.

   

   

  Turn off the low disk space warnings

  To disable the function to display the disk low space warnings.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer" v "NoLowDiskSpaceChecks" /t REG_DWORD /d 1 f

  gpupdate/force

   

  Boost disk cleanup

  • Operation of disk cleanup
  • Schedule disk cleanup
  • Creating custom cleaners

  To see a list of products of cleaning disk cleanup.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  @echo. & @echo list of cleaners&@echo = & FOR /F "usebackq tokens = 8 delims =-' %i IN ('reg query 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\VolumeCaches'") @echo %i

  
   List of cleaners
   ================
   Active Setup Temp Folders
   Content Indexer Cleaner
   Downloaded Program Files
   Hibernation File
   Internet Cache Files
   Memory Dump Files
   Microsoft_Event_Reporting_2.0_Temp_Files
   Offline Pages Files
   Old ChkDsk Files
   Previous Installations
   Recycle Bin
   Setup Log Files
   System error memory dump files
   System error minidump files
   Temporary Files
   Temporary Setup Files
   Temporary Sync Files
   Thumbnail Cache
   Upgrade Discarded Files
   Windows Error Reporting Archive Files
   Windows Error Reporting Queue Files
   Windows Error Reporting System Archive Files
   Windows Error Reporting System Queue Files
   WLX Thumbnail Cache
  

   

• How can I turn off the tiny icons next to the URL in my bookmarks menu?

  My question says it all.

  Thank you.

  Firefox is not integrated to show/hide icons (also known under the name of favicons) site in the bookmarks menu or Bookmarks toolbar, but you may be able to find an extension to take care of this. You can search here: https://addons.mozilla.org/firefox/

  Alternatively, you can change many of the Firefox user interface using custom style rules. There are a few differences between Windows and Mac when it comes to the menu bar, so I hope that someone more familiar with the Mac can sound all of the bookmarks menu.

• Defining the value of attribute inferred in analysis

  Hi all

  Given that I have under rules,

  It's nice if

  an and

  b

  As long as I have a lot of logic under A conditional and well tested.

  Now, I want to test the conclusion "it is beautiful" but I don't want to retype all THE related condition A Base attribute.

  How can I simply define A to be true and vary B conditional logic and test?

  Thank you very much.

  Update: It works in OPM cloud!

  I just tested and was able to set the value of an attribute inferred in What-If in the clouds of the OPM.

• Could you please tell me where I can find all my own disussions?

  CC did some change in the past in my profile.

  Could you please tell me where I can find all my own discussions?

  And also another problem: I used to get an e-mail every time someone answer me one of my discussions. But now, I have not received ANY email. Is not easy for me to follow in the next few days, because I shut my computer down in the night and again in the morning and then my discussion disappeared. So Dear sweet CC peut you help we did with this?

  And what is - this? : 2015-07-17_1401 - library of ha4010 when I press this icon (50 +), I have had 1000 not read in my Inbox? What is c? I don't want?

  I want only the notification on my own discussions?

  Thank you very much!

  I love CC :-)

  (50 +) notifications that you can get is about your activity on the forums. When you go to the Inbox so you can mark all as read invite him (50 +) will disappear.

  To get email notifications please refer to you as a result of links: Disable email notifications | Adobe forums (you can use this link to activate notifications)

  Adobe forum subscriptions.mov - YouTube

• Difference between flow and stolen

  Hello
  can you please tell me difference between flow and stolen
  
  Thank you
  Nirmal

  See: http://docs.oracle.com/cd/B31017_01/integrate.1013/b28981/parallel.htm

  flow will be to use a pre-defined () amount of branches, with flight you can do the amount of dynamic branches

  So let's say we have

  getUserDetails
  getAddressDetails

  now, you can use streams, create 2 branches and make the call to both methods in each branch.

  Let's say that you receive a list of customers in your service interface. Now, you can loop through with-foreach each customer and sequential not logic like Getcustomerdetails in the loop, or... .you create a flight and N is the number of clients in the list.

  After that, you will get N parallel branches that will make Getcustomerdetails (instead of the other sequential loop)

  This fly is the dynamic Variant that will create N branches according to the Counter field you base your expression on

• LR 4.2 - How to compare the evidence master and soft copy?

  Hi all

  I would like to use the audit function in LR 4.2 to preview the print output and I would use it to apply corrections to the images before they are printed, in order looks like I meant originally look like them, but I'm having problems, possibly caused by the workflow used (I'm not a pro, but my environment is calibrated correctly).

  My workflow is:

  1. I have import all photos and apply some changes so that the photos look like I want them to be (it's the master)

  2. as I want to print them, I use the audit function and load the target profile with which I create a copy of fresh evidence. Sometimes, I noticed that the differences between master and soft copy of evidence are quite dramatic, especially regarding the contrast, color and sometimes about the brightness brightness.

  3. my goal now is to adapt the image video evidence so that it looks like the control (as I wanted the photo to look like), but I can't find a good way to do it, because:

  -I can't find a (semi-) automated in order to adapt to the soft proof copy so that it "looks like" the master copy

  -in the develop module, I can't find a way to display the master foto both the soft proof copy in addition to each other to compare, to apply the changes to the copy of fresh evidence only so that it 'looks' like the master.

  The only way I have found so far is to move bewteen back copy of master and soft proof to compare (to be able to apply the necessary changes to the copy of soft proof), but it's quite painful, as the photos do not load immediately, but there are always a few seconds and I have to 'remember' how the captain looks like.

  I don't know if I'm doing something terribly wrong, but unfortunately I have not found answers to this question so far, that's why I write here.

  Hope you can point me to a solution,

  Kind regards

  Plasma2k

  Never activate with your choice of output profile (this can include checking a web output colourspace as sRGB).

  Press on Y to show a split before and after the point of view (if your toolbar is not open, press T to open - this gives different kinds of split view options).

  You will now see a comparison on appearances soundproof and sound-proof of this image.

  If you develop all the adaptation of this mode, for example to make these two more similar appearances, you are prompted to create a copy (virtual) checking if necessary - that can store these corrective adjustments regardless the main adjustments.

  The before and after view then goes to see a comparison between your image (shown without ever) start against your explosion-proof version fitted print (shown with never).

• Can I have 2 routers in my house and extend my range by buying a second device?

  Hello

  I have the router 4 X in my living room, but I got a break in the attic on the second floor. The Wifi signal does not reach the attic.

  I have a Powerline (internet through electricity network) in the attic. I want to wireless internet in the attic. How ould you recommend? Any thoughts? I was thinking of buying a second nighthawk and this, expanding the existing network. They work together like this?

  Everyone out there for a helping hand?

  Thanx

  Winood

  Yes, you can buy a second router (a R7000 would be much) set up the R7000 as Access Point (AP mode) and connect your 7500 via powerline, with year R7000 in AP mode, you can use all of the router's LAN ports. Also, take a look at the EX7000 for price comparison. It also supports the AP mode.