CAN write error BFF62008
Hi all
I continue to turn in the BFF62008 error on a piece of code that is automatically generated by the Manager of LabView SIT.
CAN write is already set to 'recent release. What's wrong?
Certainly, there at least another controller CAN CAN bus to verify to the sender that the message is sent on the correct bus. If there is no other controller CAN on the bus, your NI-CAN controller will try to send that the same CAN message again and again, until some checks that he has been sending OK.
Verification of the correctness of messages CAN be made internally in that most of the controllers in the CAN CAN standard bus.
Tags: NI Software
Similar Questions
-
The attempt to burn disc failed. Burning failed because of a medium write error.
Created playlist, click the File command: "Burn playlist to CD." Burn insiders, but after two pieces had been registered, eject disk automatically with the message: "the attempt to burn disc failed. Burning failed because of a medium write error. "Burning speed was set to 8 x.
Recent history: previously, I successfully burned two disk at maximum speed, but it took hours to write the tracks on the disc!
Using the highest speed it shouldn't take hours to write a disc.
Have you tried a good quality disc? I bought cheapo discs in the past and had 50% failure on me during combustion and 25% success fail to try to replicate.
You can try a disk cleanup drive. Slot loaders act as vacuums for dust. Yet, I would not hold for a large part using a.
You provide details on your computer. I'm guessing that it is 5 + years old, which means that you could easily be in place for a replacement drive (or buy an external one).
-
Re: Satellite L100 129 - cannot burn DVD more but can write to CD
Hello
I speak very well English, please try to understand me...
I have a Toshiba Satellite L100 129. I burn long before DVDs, but since a week I can't do anymore! I can't burn CDs even but today morning I tried to burn a CD and it worked successfully. I also tried to burn a DVD, but it does not work. Whenever I tried it shows me this kind of message in alcohol:* Information system *.
Windows XP Home Edition 5.1 Service Pack 2 (Build 2600)
Processor Info: Genuine Intel(r) CPU T1300 @ 1.66 GHz (1662 MHz)
Memory available to Windows: 1.038.384 KB* Information program *.
File name: C:\Program Alcohol Soft 120\_Alcohol.exe
Legal name: Alcohol Soft Development Team
Description: Alcohol 120%
Original: Alcohol.exe
Product: Alcohol 120%
Brand: Alcohol Soft Development Team
Copyright: Copyright (c) 2002-2008 Alcohol Soft Development Team
Version: 1.9.7 (Build 6221)
Date: 2008/02/22
Size: 1815496 bytes
Hash: ee833b4b446b7fa2e05541d4090f3c33
File name: C:\Program Alcohol Soft 120\alcoholx.dll
Legal name: Alcohol Soft Co., Ltd.
Description: Alcohol virtual device control library
Original: alcoholx.dll
Product: alcohol
Copyright: Copyright (C) 2000-2008
Version: 4.12.0 (version 0)
Date: 2008/01/18
Size: 1244640 bytes
Hash: f1274ca402d9296cd31eacc34a88bbea
File name: C:\Program Alcohol Soft 120\devsupp.dll
Legal name: Alcohol Soft Development Team
Description: Alcohol software device capability
Origin: devsupp.dll
Product: Alcohol software device capability
Copyright: Copyright (c) 2002-2006 Alcohol Soft Development Team
Version: 2.5.4 (Build 222)
Date: 2008/02/22
Size: 60288 bytes
Hash: 4b22ef831539d9f5b6923d3d286141e7* User information *.
License: UNREGISTERED
Registered user ID: not REGISTERED* Options setting *.
Devices of control interface: default driver control Interface
CPU priority level: high
Size of buffer (MB): 256
Examine the accuracy of data read from physical devices: Yes
Activate the Enhanced weak sector Scanner during dumping: No.
Overburn disc (s): No.
Disable "write better automatic speed selection" if possible: No.
Fill memory buffer before recording discs: Yes
Book now Type DVD + R / DVD + RW disc as DVD-ROM when burning: No.
Ignore Media Type: No.
Refrigerants (re-writable physical Signature) emulation: No.
BAD sectors emulation: No.
Data fixed & emulation of subchannel: No.
Laserlock emulation: No.
Current language: French* Device (s) list *.
(D) HL-DT-ST DVDRAM GMA - 4082N (atapi, Port 1, Bus 0, Target 0, Lun 0)
(G) QO2663I TAI648E (asukl9p6, Port Bus 2, 0, Target 0, Lun 0)ACPI.sys ACPIEC.sys C:\windows\system32\drivers\aegisp.sys afd.sys asukl9p6. SYS
ATAPI.sys ATMFD. DLL audstub.sys BATTC. SYS c:\windows\system32\drivers\beep.sys
BOOTVID.dll Cdfs.SYS cdrom.sys CHDAud.sys BoiHwSetup.sys
CLASSPNP. SYS CmBatt.sys, compbatt.sys disk.sys DLABOIOM. SYS
DLACDBHM. SYS DLADResN.SYS DLAIFS_M.SYS DLAOPIOM. SYS DLAPoolM.SYS
DLARTL_N.SYS DLAUDF_M.SYS DLAUDFAM. SYS drmk.sys DRVMCDB. SYS
DRVNDDM. SYS dump_atapi.sys dump_WMILIB. SYS Dxapi.sys dxg.sys
dxgthk.sys enodpl.sys Fips.SYS fltMgr.sys Fs_Rec.SYS
Ftdisk.sys hal.dll HDAudBus.sys hiber_WMILIB. SYS HSF_CNXT.sys
HSF_DPV.sys HSFHWAZL.sys HTTP.sys i8042prt.sys igxpdv32. DLL
igxpdx32. DLL igxpgd32.dll igxpmp32.sys igxprd32.dll imapi.sys
Intelppm.sys ipnat.sys ipsec.sys isapnp.sys c:\windows\system32\iviaspi.sys
Kbdclass.sys KDCOM. DLL kl1.sys klbg.sys klfltdev.sys
klif.sys c:\windows\system32\drivers\kmixer.sys ks.sys KSecDD.sys klim5.sys
mdmxsdk.sys mnmdd. SYS Modem.SYS mouclass.sys MountMgr.sys
C:\windows\system32\drivers\mrxdav.sys mrxsmb.sys Msfs.SYS msgpc.sys mssmbios.sys
MUP.sys NDIS.sys ndistapi.sys ndisuio.sys ndiswan.sys
NDProxy.SYS netbios.sys netbt.sys Npfs.SYS netdevio.sys
ntdll.dll Ntfs.sys, ntoskrnl.exe Null.SYS OPRGHDLR. SYS
PartMgr.sys pci.sys system32\drivers\pciide.sys PCIIDEX. SYS pcmcia.sys
PFC.sys portcls.sys psched.sys ptilink.sys PQNTDrv.SYS
Qkbfiltr.sys qmofiltr.sys rasacd.sys rasl2tp.sys PxHelp20.sys
RASPPPoE.sys raspptp.sys raspti.sys rdbss.sys system32\drivers\rdpcdd.sys
Redbook.sys Rtlnicxp.sys s24trans.sys SCSIPORT. SYS spzx.sys
SR.sys srv.sys swenum.sys SynTP.sys StarOpen.SYS
Sysaudio.sys tandpl.sys tcpip.sys TDI. SYS termdd.sys
Update.sys USBD. SYS usbehci.sys usbhub.sys USBPORT. SYS
USBSTOR. SYS usbuhci.sys vga.sys VIDEOPRT. SYS VolSnap.sys
w39n51.sys watchdog.sys wdmaud.sys win32k.sys wanarp.sys
WMILIB. SYS* Detailed information from the device (s) *.
(D) HL-DT-ST DVDRAM GMA-4082N(1:0) for detailed information.
Identification of the seller: HL-DT-ST
Product identification: DVDRAM GMA-4082N
Production revision level: HV02
Location: atapi, Port 1, Bus 0, Target 0, Lun 0
Support recording method: DAO, RAW SAO, RAW SAO + SUB, RAW DAO (96), TAO, DAO DVD
BURN-free technology: BURN-Proof
Auto-select best write speed: not supported
-* Note: this information below is provided by the unit, it would be inaccurate. *-
-* This software does not use this information! *-
Removable media: Yes
Version: ATAPI (INF-8090i/INF-8020i/INF-8028i)
Response data format: 02 h
CD - R read/write: Yes/Yes
CD - RW read/write: Yes/Yes
Reading CD - R fixed Packet: Yes
Write test: Yes
Read DVD-ROM: Yes
DVD-R read/write: Yes/Yes
DVD-RAM read/write: Yes/Yes
Audio playback: Yes
Composite Audio and video data streams: No.
Digital output (IEC958) on port 1 supported: No.
Digital output (IEC958) on port 2 support: No.
Mode 1 form 2: Yes
Mode 2 form 2: Yes
Multisession: Yes
BUF: Yes
CD-DA commands supported: Yes
CD-DA Stream is accurate: Yes
R - W supported: No.
R W-interlaced and answer key: No.
C2 pointers Support: Yes
Taken ISRC supported: Yes
Taken UPC supported: Yes
Read Bar Code: No.
Lock media into the drive: Yes
Currently drive LOCK state: unlocked
Prevent jumper: No.
Eject command: Yes
Separate volume levels: Yes
Separate channel mute: Yes
Changer supports the drives present: No.
Software slot selection: No.
Side able change: No.
P to W of introductory part: Yes* Source Image/disc information *.
Type: File ISO Standard image
Path: C:\Documents and Settings\Rhissa Harouna\Mes documents\
Name: PANDORA.iso
Size: 1927,75 MB
Session: 1
Track: 1Session 01:
Track 01: DVD, number of sectors: 987008 (1.88 GB), address: 000000* Newspaper * dumping/record of progress
The timestamp of the log file: 2009-04-06 17:09:38
17:09:38 info processor: Genuine Intel(r) CPU T1300 @ 1.66 GHz (1657 MHz)
17:09:38 MEDIA by memory available to Windows: 1.038.384 KB
17:09:38 not enough memory! Adjust the size of the memory buffer à * 256 MB.
17:09:38 image file of reading from: C:\Documents and Settings\Rhissa Harouna\Mes documents\PANDORA.iso
17:09:38 DVD Source Info: Session: 1, track: 1, number of sectors: 1.88 GB / 987008
17:09:55 (:)) D HL-DT-ST DVDRAM GMA-4082N(1:0): MEDIA by method of writing / speed)
17:09:55 helio - DAO - 8.0 X (11080 KB/s)
(D) HL-DT-ST DVDRAM GMA-4082N(1:0) - media format: DVD-R
17:10:16 (:)) D HL-DT-ST DVDRAM GMA-4082N(1:0) - [write ERROR] LBA: 0, length: 32)
S:key 03/0 C / 00 - "Write Error".
17:10:16 (:)) D HL-DT-ST DVDRAM GMA-4082N(1:0): is burning failed e!)
17:10:16 error message [03/0c/00] - write error
17:10:16 (:)) D HL-DT-ST DVDRAM GMA-4082N(1:0): is burning failed e!)
17:10:16 conference of the e cancelled © image file!
17:10:19 an error occurred during the procedure of burning!
Please consult the register and report the errors to technical support.I don't know how to solve it please I need help... Thank you
Hello!
You can burn discs using another program Nero for example or this only happens with alcohol?
In your case, I would try to remove the upper and lower filters in the Windows registry. Normally this does not solve the problems with the CD/DVD drive. Just follow the steps described in this workaround from Microsoft:
http://support.Microsoft.com/kb/314060Good bye
-
SanDisk Ultra II - write errors
I recently bought 2 240 gb Ultra II. My intention is to use for the image of my C disk cloning.
I use one
Upgrade of the SATA Apricorn EZ Upgrade Kit with USB 3.0 portable hard drive connection and box EZ - UP3
Link to the device google foregoing and check on Amazon
I used this camera for about three years now, once a week to make backups of the system.
After I clone a drive, I start since it to check that it has been cloned successfully.
I used this camera to try to clone both Ultra II and during the cloning process, I received more 20 000 clerical errors.
Since I had that much erors he didn't continue the clone so I abandoned the operation.
When I go in to Win 8.1 disk management, the drive is marked as offline and I can't reformat the hard disk.
The two drives have the same problem.
I contacted Sandisk for an RMA for the two days of readers 3 or 4 number and their response so far has been for me
to run their SSD Sandisk dashboard. The dashboard shows readers as well without error. I sent the
results of Sandisk and have done a few more tests.
It seems that if the SSD is in an external case connected to the USB 3.0 or USB 2.0 port
the cloning process gets thousands of clerical errors. If I put the same SSD in a drive removable bay that
connects directly to the motherboard I can clone the drive with Acronis True Image Home.
The SSD should be able tobe used external fences to run a cloning process.
I use the exact same system and closing to clone of OCZ, Crucial, Kingston, Intel, and Samsung
SSD with absolutely no write errors.
Is that what anyone has experienced this type of behavior when cloning the device above.
I spent several hours working on this issue and I'm about to return the SSD to the seller
I bought source and buy 2 Samsung SSD
Thioughts and suggestion please.
I just finished an operation clone with the new USB 3.0 controller.
The clone operation completed without error.
I didn't test with a SanDisk Ultra II SSD since RMA I got them to the seller to purchase.
I have test it with a SanDisk Ultra flash drive, that would give me a "failed to start' in any USB 3.0 port.
Now, however, with the new controller, flash drives are recognized and insert correctly.
I guess that the controller card is outdated since it was 5 years or more and who
the new controller card will work correctly with the SanDisk Ultra II SSD.
I will consdier this thread resolved. If no new problems with the new controller I will present.
-
Disk write error, or an error?
Hello! I'm back to a blue screen of death fixed thatI before the... This time the question comes from another source... The blue screen, I want to talk about is the "UNMOUNTABLE_BOOT_VOLUME" before starting on Windows 8... I got this error after that my Windows updates stopped on 30% and my computer had a reboot... I am very sure that the problem is caused by a disk write error, so I would like to know EVERY WAY TO FIX any disk write error... Thanks to all those who try to give me a great help.
At least the problem wasn't my hard drive... I actually downloaded some drivers on the HP site which does not on my knees, that's why I fell into errors, and also some Windows updates are not workin on that... My only solution is to find a backup image (which I can't write it myself) for my knees (Pavilion G6 2321el) and use it for a perfect restoration...
-
HP Device Manager 4.6 Installation failed: local write error - access denied
Need help to install the management software Application computer Device Manager 4.6 HP Thinclient
While doing the custom Setup, I got an error for the language setting. The Error Message says "local write error - access denied.
How to solve the problem... Please help as soon as possible
More details if you need:
I use Windows 2008 R2 Server Operating System - 64 bit [VM]
I use IIS 6.0 to create FTP Site
Troubleshooting:
I tried to install on another Virtual Machine with same Windows 2008 R2 Server Operating System - 64 Bit
I tried to install the software several times but still facing the same problem
Any help in this matter would be appreciated
Kind regards
K N R K
Hello
Please find the fix for the problems
1 Please download and install HPDM 4.5 and 4.5 SP5
2 extract HPDM 4.6
3. start install HPDM 4.6
a. Select custom
b. ensure that all HPDM components are checked. Click Next.
c. accept the default root for the master repository path, or click Browse and navigate to a specific location. Click Next.
d. click on install. HPDM is now installed.
e. after the HPDM update is installed, a Configuration of HPDM Wizard appears. Select your language and then click Next
f. click Search to check the ports and then click Next.
g. make sure that DHCP server that is not located on this computer is selected and then click Next
hours of service under start PXE when the gateway, select No and then click Next.
i. click on run
j. click Finish.
====================================================
Although I am an employee of HP, I speak for myself and not for HP. ===
* Click on the star of CONGRATULATIONS on the left say "thank you."
-
Toshiba 55VL963 - TV USB function reports write errors
Hello
I have 55vl963 TV with latest firmware 6.9.MD.1
I'm trying to get lists of channels and other settings using the function of the cloning Hotel.
However, it seems the TV to USB function often reports write errors (or sometimes ends successfully, but generates corrupted files).
I tried different media USB, formatted in FAT16 or FAT32.
Thanks for any help to solve this.
> I'm trying to get lists of channels and other settings using the function of the cloning Hotel.
The TV seems to support two USB 2.0 ports.
Have you checked this Clone Mode using different USB ports?However, I guess that data write the problem could be related to the used USB flash memory key.
Even if you have tested some different USB media, I guess that there are no other possibilities as to test another stick of memory. -
Sync CAN read, CAN write and DAQmx
Hi all
I have setup an application with a cDAQ 9178. I have several digital and analog i/o cards and a BOBBIN card in the chassis.
The unit is used in a hydraulic test bench. I'm reading and writing of my analog equipment and digital I/O timed and synchronized.
I also managed to synchronize my CAN read waveforms with my entry analog daqmx and so sync CAN read with DAQMX. I used one of the examples in the finder of the example to handle this. Now I want to synchronize my CAN write waveforms with my CAN read waveforms and so also with analog and digital DAQmx tasks.
Are there examples where using the API OR-XNET which shows how synchronize CAN read waveform and CAN write waveform on the same interface?
I tried to read my signals output by adding them to the list of signals of the CAN read signals, but they did not show.
Thanks & best regards,
Lieven
Hi Simon,.
I have the module 9862 in my chassis and have managed to use the trigger for the start of my NI9205 analog input card to synchronize my readings CAN with all my other analog I/o.
Now, I just wanted to see my CAN output signals synchronized with the rest of the signals. At first, I tried to use the same trigger for my BOX of output on the map, but somehow, it did not work properly. After looking a little on the forum and in the examples that I found a knot of XNET SESSION property called EchoTX and used on my BOX of exit session. I then added my output signals to my list of input signals and was able to read my output signals.
That's what I was looking for.
Thank you
Lieven
-
Try to load software PhoneTree and I continue receiving ADODC error code. What should I do to install the software? How can ADODC error be corrected? I have Windows VISTA
Hello
Thanks for posting your question in the Microsoft Community.
From the description of the problem, you are not able to install a belkin wireless adapter. I'll be happy to help you on this question.
You did changes to the computer before the show?
Method 1: I suggest you to run the fixit from the following link:
Diagnose and solve the program installation and uninstallation problems automatically
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/Method 2: I suggest you perform the clean boot and check if the problem persists.
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/kb/929135Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.
Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
-
my dvd burner can not read the cd/DVD drive, even when I put the dvd bootable windows it does not read, but it can write DVD. Any help would be appreciated.
Hi shaikhsabir,
Fix It at this link should solve the problem of not being able to read CD/DVD.
Let us know if that helps.
-
What locations on the drive C can write non-Admin users?
I am writing an applicaton that I would save temporary data on the C drive. The request may or may not be run as an administrator, and I would like to know if there is a particular place that non-admin users can write in Windows 7 or Windows XP. Any help on this? A link would be most appreciated.
Thank you
Mike
I was hoping that kind of something like user data or Application data. The application folder was created at installation. What is the standard for the development of the app?
The standard in Windows 7 is "C:\ProgramData". -
Hello, when I install Photoshop, he write error 16!
Help! Hello, when I install Photoshop, he write error 16!
Error 16: Creative Suite help / Error Configuration 16 | CC, CS:
http://helpx.Adobe.com/x-productkb/policy-pricing/configuration-error-CS5.html
-
We can write the HTML in the page .jspx?
Hi This is Mickel.
I'm new to ADF, and I learn adf.
previously, I worked on jsp.
We can write the HTML in the page .jspx?
I need to design menu. (I want to conceive using ul, li and css)
pls suggest me different alternatives.
Thanks in advance.
Gisele.
Hi Steve,.
You can design menus using af point: menu (http://docs.oracle.com/cd/E16162_01/apirefs.1112/e17491/tagdoc/af_menu.html). This is one is generally not a good practice to put the html code in file jspx (I fell not on these cases). Try to use ADF tags so that your code is generic. Leave the HTML rendering engine.
Thank you
-
How to turn a doc on my screen for portrait landscape pdf so I can write about it?
In Reader, you can rotate the display of the PDF file in the view menu.
Kind regards
Ana Maria
-
Can write us "PowerCLI Script" to get the details of card RAID HP (Firmware & Driver)
For example: native ESX command below shows desired output for me.
But we needed equality PowerCLI ESX command below script
# cat/proc/driver/cciss/cciss0
cciss0: HP Smart Array P400i controller
Board ID: 0x3235103c
Firmware version: 7.22# cat/proc/driver/hpsa/hpsa0
hpsa0: HP Smart Array P410i controller
Board ID: 0x3245103c
Firmware version: 5,70
Driver version: HP HPSA driver (v 5.0.0 - 17vmw)
The extracted following PowerCLI you will get server and type of controller, firmware version and the hpsa/Smart Storage Array controllers driver version based of:
Get-VMhost | Sort | Select Name, Model,@{N='Controller Type'; E={(Get-VMHostHba -VMHost $_ | ? {$_.Model -imatch '.*(hpsa|smart).*'}).Model}},@{N='Controller Firmware'; E={($_.ExtensionData.Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo | ? {$_.Name -like '*hpsa*firmware*'}).Name}},@{N='hpsa Driver Version'; E={($_.ExtensionData.Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo | ? {$_.Name -like '*scsi-hpsa*'}).Name}} | Format-Table -Autosize
The sample output:
Name Model Controller Type Controller Firmware hpsa Driver Version---- ----- --------------- ------------------- -------------------esxihost1022.local ProLiant DL380 G6 Smart Array P410i HP Smart Array Controller HPSA1 Firmware 6.40 Hewlett-Packard scsi-hpsa 5.0.0.60-1OEM.500.0.0.472560 2014-05-15 15:32:23.000esxihost1023.local ProLiant DL380 G6 Smart Array P410i HP Smart Array Controller HPSA1 Firmware 6.40 Hewlett-Packard scsi-hpsa 5.0.0.60-1OEM.500.0.0.472560 2014-05-15 15:32:23.000esxihost1024.local ProLiant DL380 G6 Smart Array P410i HP Smart Array Controller HPSA1 Firmware 6.40 Hewlett-Packard scsi-hpsa 5.0.0.60-1OEM.500.0.0.472560 2014-05-15 15:32:23.000esxihost1033.local ProLiant DL360p Gen8 Smart Array P420i HP Smart Array Controller HPSA1 Firmware 5.42 Hewlett-Packard scsi-hpsa 5.0.0.60-1OEM.500.0.0.472560 2014-05-15 15:32:23.000esxihost1034.local ProLiant DL360p Gen8 Smart Array P420i HP Smart Array Controller HPSA1 Firmware 5.42 Hewlett-Packard scsi-hpsa 5.0.0.60-1OEM.500.0.0.472560 2014-05-15 15:32:23.000esxihost1041.local ProLiant DL380 G5 Smart Array P400 HP Smart Array Controller HPSA1 Firmware 7.24 VMware scsi-hpsa 5.0.0-17vmw.500.0.0.469512 2011-08-19 01:58:59.000esxihost1042.local ProLiant DL380 G5 Smart Array P400 HP Smart Array Controller HPSA1 Firmware 7.24 VMware scsi-hpsa 5.0.0-17vmw.500.0.0.469512 2011-08-19 01:58:59.000esxihost1160.local ProLiant BL460c Gen8 Smart Array P220i HP Smart Array Controller HPSA1 Firmware 5.22 Hewlett-Packard scsi-hpsa 5.0.0-40OEM.500.0.0.472560 2012-08-24 21:04:51.000esxihost1161.local ProLiant BL460c Gen8 Smart Array P220i HP Smart Array Controller HPSA1 Firmware 5.22 Hewlett-Packard scsi-hpsa 5.0.0-40OEM.500.0.0.472560 2012-08-24 21:04:51.000
Maybe you are looking for
-
Help does not work, the url links do nothing
I have windows 8.1.When in thunderbird, I press F1 and nothing happens.Even clicking on the Release Notes or the help contents.The same thing happens when I click on a link to a URL in a received email.I went through all the help on the net and none
-
How to open a file .z02 on my MBP?
Installed winzip, tharchiver, unzipper and about all the programs that I found to unzip the files but I can't open this file .z02. Any suggestions?
-
Satellite P10 infrared device question
I have the following question:I'm trying to connect a mobile phone via an infrared connection and use it as a modem GPRS under Windows XP Home SP2 on a Satellite P10 874. When the phone is in range, the laptop detects via the infrared port and I can
-
delete returning Dungeon calendars
Two calendars that were no longer required have been deleted many months from my Mac app calendar. I also deleted them on my iPad and iPhone many times. Both calendars have not reappeared on Mac after you remove, yet they keep reappearing on my iPhon
-
I had this problem for a month, that it connects for 20mins then disconnects and I have to restart my computer to use it, I tried troubleshooting like 20 times and I tried everything