can you connect 3g usb modem to the computer than to wireless

Similar Questions

• I plugged my USB Modem to the computer, it's MMX352G micromax modem. After you connect to the internet, all browsers open the pages of the BM, but in the taskbar sign of the network is to have a red cross. Why?

  I plugged my USB Modem to the computer, it's MMX352G micromax modem. After the internet connection all browsers open the pages of the World Bank, but in the task bar sign network is to have a Red Cross and when I go over it, it says not connected, but I can always use internet in my browsers. Why? It causes an adverse effect on my computer.

  Hi Akash,

  Welcome to the Microsoft community. According to the description of the bar icon problem tasks of the network have a red x, but you can still access the internet. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You use a third-party security software?

  I suggest you follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  Method 2: Follow the steps in the article.

  Windows wireless and wired network connection problems

  You can read this article for more information:

  How can I troubleshoot network card?

  I hope this helps. Let us know if you need more assistance.

• App installed fish cactus, can you connect is no longer at the admin page

  Hi all

  I'm having a problem where after I installed app Cactus of fish I can no longer connect to my admin page. Previously, go to myaddress:80 would bring me to the admin page. Now only myaddress:80 / admin leads me to the admin page and it crashes until he tells me "ReadyNAS 'Admin Page' is in offline mode." I guess it's a problem with the apache configuration (the system uses apache, OK?) I have SSH access, so if anyone can point me in the right direction it would be much appreciated.

  Thank you

  L

  The fixed. There was a site called activated phantom fv-000-http causing trouble. I deleted it, restarted apache and now http://localhost/admin redirects to https://localhost/admin.

• How can I connect my usb modem to my linksys WRP400G2 router

  Is anyway it can be linked, perhaps through an adapter?

  Check out this link.

• Can you connect directly a Tablet wifi to your computer for the internet

  Can you connect directly a Tablet wifi to your computer for the internet

  Let me answer this way:

  Suppose you have a desktop or workstation that has a wired connection to the internet. Moreover, that this system also has a working wireless card. Another device with a pu wireless device to connect to desktop with a wireless ad-hoc connection. The desktop can be configured for connections to bridge the two and leave the system second to use "Internet connection sharing" to connect to the Internet.

  Start here:

  http://support.Microsoft.com/kb/306126

  Tom Ferguson.

• How can I download an lg usb modem on the windows site?

  downloads

  How can I download an lg usb modem on the windows site?

  How can I download an lg usb modem on the windows site?

  Your question makes no sense. How anyone can download a modem?

• When I connect my usb modem to my pc and it is held automatically loading my pc restarts

  When I connect my usb modem to my pc and it is held automatically loading my pc restarts

  Hello

  Please check the USB modem to a different USB port or another system.

  If it works fine in another port or another system, it may be the problem with USB port.
  If you face the same problem. then the problem is with a USB modem,
  Please check with the manufacturer of your USB modem.
  Kind regards
  Chauvet J.

• My Sprint HTC Android mobile phone connects with the supplied USB cable, but the computer says 'No HTC Device Connected'

  My Sprint HTC Android mobile phone connects with the USB cable, but the computer says 'No. HTC Device Connected' so I can't sync...

  Hello

  1. do you have HTC Manager installed on the computer?

  2. have you tried it with different USB ports?

  You need the HTC Sync HTC phone Manager software.

  Method 1: Try again with different USB ports and see if that helps.

   

  Method 2: If HTC Sync is installed, if you get the message "no device connected" in HTC Sync, ensure that your phone USB setting is changed to "Charge Only" to "HTC Sync".

  If the methods above do not help, you can contact HTC for additional help.

  Here is the link: http://www.htc.com/us/support/

• Locked up/hang up when you use a USB modem.

  Hi all, these days I have a problem with my laptop.

  When I connect a USB modem to my laptop and surfing the internet for a while, suddenly my laptopcomputer became unusable. I tried to shut it down via power button, but instead of 'sleep', he still appeared on the screen of my last and cannot be used at all. Then, as the second best, I removed the battery charger and the power then restart.

  I tried some actions: pass my firewall to Windows Firewall, using my modem with charger unplugged, scanned my laptop for malware (my laptop has been infected before, but now is healed), register of defragting and so on, but none succeeded.

  For information, here are the products that I use:
  1 Dell Inspiron with Core 2 Duo, 2 GB of RAM and nVidia GeForce 9300 M GS 512 MB
  2 HSDPA USB mOdem Huawei E226
  3 PC Tools Firewall more
  4 Auslogics and Registry Clean Expert (register defragtors)
  5. IT IS IE 8
  6. AVG 8.5 and Ad Aware (the latter not having active Ad-Watch)

  If anyone knows how to do this topic so I'm glad to hear it.
  Thank you.

  EDIT: this situation persists once a day I use my modem daily.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - device - Modems Double click top - tab of the driver manager - click on update drivers (this will
  likely to do anything that MS is far behind the certification of drivers) - then right click on uninstall

  Continue:

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link.

  My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link. What could be wrong?

  Hello

  • What connection do you use?
  • What is a wired or wireless?
  • What happens when you try to start Internet Explorer?
  • You receive an error message?

  You can check these links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://support.Microsoft.com/kb/956196

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Can you connect two cable on wifi networks?

  Basically, I'm trying to build it.  It was much easier in photoshop than to the fact of installation.

  

  There are many features, some wired, some wireless.  I ran son where I can run threads, but it's a bit more difficult that I thought for a domain.

  Basically, I need to connect two wired over wifi networks.   The 2nd must share this wifi via ethernet. (I can exchange picture 2 and 3 if necessary)

  There are also two 4-port switches in the mix for the NAS in the basement and other devices connected.

  Everything works the latest firmware. All computers on the network are running 10.11.4 Mac

  Can you connect two cable on WiFi networks?

  In theory, Yes.  In practice, not if you work with image, video files or other media.

  Honestly, it's a big House of cards, and even if it does not, it will be very SLOW... Since everything will depend on a connection without wire between Imagine and Imagine 3... and wireless will be much less bandwidth of a wired connection, not to mention the much less reliable than a wired connection being.

  If unfortunately, the bottom line here is that a professional, or even a good amateur would never has something like this.

  There are some other questions to ask, but by far the most important would be... is it possible that Imagine and imagine 3A connect using a wired Ethernet cable connection?

• I can't connect my HP 7520 to the internet.

  Hello

  I can't connect my HP 7520 to the internet. The network works for all customers, but not for my HP 7520. He wants me to enter settings Proy address and port. What is computer /?

  I have an AUSUS router.

  Best regards / Robert

  Given that the printer can connect to the network and will allow you to print, I'm not sure that there is a network problem. Connection to another network and checking the EWS and applications Internet would be a great step in troubleshooting, and I'd be curious results if you try.

  The only other option I can suggest would be to contact the HP Cloud support team, if you have not yet. If you live in the USA/Canada, 1-855-785-2777. If you live outside the USA/Canada, click HERE to find the number of Technical Support for your country/region.

• Can not connect to Windows 8 on a computer that cannot connect to the internet

  Hello. I have a complex version of a common problem. I can't connect to Windows 8 on a computer that I've not used within six months. The following conditions apply.

  1. I forgot the password which was used last on this computer to turn off the line connection
  2. unable to get the computer online because the only modern it might connect to a fried.

  3. it is a Vaio Duo and has no Ethernet port.

  4. I don't care about the data, so don't mind wiping clean but I don't want to pay for the office. Computer has no hard drive, so I can't restore the BONES of the disks.

  What would you suggest here?

  Thanks for any help

  Hello

  Please provide an opportunity to help Microsoft Community.

  If you do not remember the password, you can try to reset the password online. You can use Internet Explorer to reset the password for the Microsoft Account.

  Open Internet Explorer on another computer, and then try to reset the Microsoft Account password by following the steps in the link below.

  Forgotten password and other connection problems

  As mentioned you use computer Vaio Duo which I checked comes pre-installed with Windows 8.

  If the Windows operating system comes pre-installed on the laptop, then you will need to contact the manufacturer of the system for the installation media that allows you to update or reset the settings of the computer.

  Of the manufacturer of the system provides a built in utility to repair the operating system which is known as system recovery partition, I ask you to contact you the Sony Support for more information on how to refresh/reset the settings of the computer.

  Please visit the link provided below for support from Sony:

  http://www.Sony.co.UK/support/en/product/SVD1322Y9E

  Hope that the information provided is useful. We know the results.

• Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?

  Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?  How about studio flashes (Alien Bees)? I just sold my Canon gear and moved to Sony, but I need advice on how to trigger wireless flashes.  Thanks for any help you can provide.

  Larry

  LarryMarshall, Any Trigger of manual Radio should work.  Assistants of pocket or RadioPoppers.

  But there are a few problems with the 60 m.

  (1) it doesn't have a PC or a 1/8 port to connect directly to a Rec Radio of any brand.

  (2) you WILL NEED to buy or use a hot shoe with a PORT adapter... 1/8 according to the sync cable or PC you may already own.

  (3) you WILL NEED to 'Check' to 'ensure' that trigger the 60 m SHAFT is aligned with the center of contact your hotshoe adapter hot with a PORT... because some adapters won't online upward with the 60 m Flash... who fooled you into believing that it does not work.  When, in fact, it's just the PIN which is not aligning with ALL the hot shoe adapters.

  It will work... you just have to be careful... and know of the gatcha.

  The 60 m PUT claw is not fully compatible with all... hot shoe adapters and there that to do with how PUT 60 m flash foot aligns the trigger ROD.

  I triggered the 60 m in flash with RadioPoppers... in the manual... so, I know it works.

  It is, manual release of the waste of the 60 m flash TTL/HSS abilitys.    What is needed is for SONY to develop and deliver a Radio trigger Solution.  Which would be TTL/HSS and you allow to 'Control' the Flash too... from the camera.

  It is the power of a Flash of modern Radio System.

  Manual triggers are old school.

  p.s. the A7r/A7 can easily trigger flashes of Studio with Pocket Wizzards or RadioPoppers... or probably triggers of manual.    Just be careful if the brand you choose is reliable.

  Pocket wizzards and RadioPoppers were the choice of PRO for years.  Because they are reliable.

• IM related to Adobe Creative Cloud, but I can't connect. When I run the apps, said that I did not. License does not work

  IM related to Adobe Creative Cloud, but I can't connect. When I run the apps, says that I don't have license, license does not work.

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "