can you "connect" a control to an existing type definition?

Similar Questions

• Can you connect two cable on wifi networks?

  Basically, I'm trying to build it.  It was much easier in photoshop than to the fact of installation.

  

  There are many features, some wired, some wireless.  I ran son where I can run threads, but it's a bit more difficult that I thought for a domain.

  Basically, I need to connect two wired over wifi networks.   The 2nd must share this wifi via ethernet. (I can exchange picture 2 and 3 if necessary)

  There are also two 4-port switches in the mix for the NAS in the basement and other devices connected.

  Everything works the latest firmware. All computers on the network are running 10.11.4 Mac

  Can you connect two cable on WiFi networks?

  In theory, Yes.  In practice, not if you work with image, video files or other media.

  Honestly, it's a big House of cards, and even if it does not, it will be very SLOW... Since everything will depend on a connection without wire between Imagine and Imagine 3... and wireless will be much less bandwidth of a wired connection, not to mention the much less reliable than a wired connection being.

  If unfortunately, the bottom line here is that a professional, or even a good amateur would never has something like this.

  There are some other questions to ask, but by far the most important would be... is it possible that Imagine and imagine 3A connect using a wired Ethernet cable connection?

• Can you connect directly a Tablet wifi to your computer for the internet

  Can you connect directly a Tablet wifi to your computer for the internet

  Let me answer this way:

  Suppose you have a desktop or workstation that has a wired connection to the internet. Moreover, that this system also has a working wireless card. Another device with a pu wireless device to connect to desktop with a wireless ad-hoc connection. The desktop can be configured for connections to bridge the two and leave the system second to use "Internet connection sharing" to connect to the Internet.

  Start here:

  http://support.Microsoft.com/kb/306126

  Tom Ferguson.

• In Adobe Acrobat 10.0.0 comparing two pdf files, it automatically locks. Can you please share how to avoid this type of comparison file accidents?

  Hi all

  In Adobe Acrobat 10.0.0 comparing two pdf files, it automatically locks. Can you please share how to avoid this type of comparison file accidents? If anyone with the idea, please share it.

  Hi sathishk15640596,

  Follow this thread to reset the Acrobat preferences:- How to reset preference settings in format Acrobat.

  If you are on Windows OS, open Acrobat, go to the Help menu and repair the installation.

  I would like to know is what happening to the entire document or certain act.

  Please check with another account user as well as to reproduce the problem.

  Kind regards

  Christian

• How can you connect a printer to a laptop without cd-rom access Tablet

  How can I connect Canon MX472 printer for a Tablet laptop without cd-rom access?

  You can download all the software here:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx472#Dr...

• Can you connect U3014 DELL to the PS3?

  OK, I have the old dell 3007wfp 30 '. I tried to connect my ps3 to the screen via hdmi/DVI. It did not work. I can't play either any Blu - ray movie via computer on this screen.

  Now, in the next 2 weeks, I plan to buy the new U3014 from DELL. I'm still very happy with my old dell 3007, but I also want to connect to the PS3.

  My question is can connect you the new dell monitor 30 ' to the PS3 and it allows to play games? I mean that the new screen has the hdmi connection, so maybe it works with the PS3? Can you also use it to watch Blu - Ray?

  The naturalness of 2560 x 1600 resolution can prevent connection and using the PS3 and watch Blu - ray or he makes the adjustment of hd resolution?

  The only reason why I'd buy this monitor is if I can connect to the PS3. Can any representative dell or Dell U3014 help me?

  Hi Mary,

  Dell U3014 comes with HDMI output and you should be able to connect with the PS3 to play games. However, you will need to connect external speakers to "Audio output" to get the sound output as there are no internal speakers in U3014. The monitor is capable of resolutions up to 2560 x 1600 and should be able to play Blu - ray videos without any hassles. You can refer to the technical specifications of the monitor available in Guide user here.

  I hope this helps. Answer please if you have any other questions.

• Can you connect to a logical unit number after you run a test with RecoverPoint SRM

  Sometimes, when I run a test of the recovery plan that it does not connect to one of my LUN in a RecoverPoint consistency group.  Is there a way I can connect to the LUN when running always the same test?  The same would be true if I would with failover, can I connect to a unit number logic which have not mapped for some reason any after the execution of the recovery plan for the virtual machine online.

  you really need to trigger an SR to see why the lun is not mapped. is the lun of a data store or a RDM vmfs?

  common causes (assuming here all LUNS are in the same consistency RP group):

  -device not picked up by refresh, difficulty because it is to increment the RS parameter to run > 1 rescan for the storage of preparation step (see MRS. Advanced settings)

  -data store not picked up by discount vmfs (SRM a timeout when refreshing VMFS which can be increased)

  -datastore not zoned properly on all hosts, look to see if some hosts have access and not others... which is usually a sign of your problem is one of the first two points and it is easy to see in the SRM newspapers so you should hire vmware support.

• How can you procedurally & quot; get & quot; an existing movieClip?

  Sorry for what is probably a stupid question. I know I've seen the syntax on how to do it, I just can't find it at the moment!
  
  I want to say is: I have a lot of existing movieclips on the timeline, named things like mc_1_1, mc_1_2, mc_1_3, etc..
  
  I want to hide on the procedural level in a loop. I can create strings such as "mc_1_1", "mc_1_2", but I guess the question is: How can I turn a string into a reference to an existing MovieClip? (Using the terminology of C/C++, I would say that 'how can I get a pointer to an existing movieClip?)
  
  Feel stupid... Thanks... :-)
  
  

  Okay, second time today I've answered my own question.

  The answer is 'eval' - mc_clip = eval ("some_string");

  Sorry, I couldn't find it before! ;-)

• Can you connect a cable DB37 to block cfp-cb-1 connector?

  Hi all

  I am looking at upgrading an existing unit of the point compact field to a unit of the cDAQ and I find a way to test the new system without having to release and rewire any old compact field point of terminal blocks to test.  I would like to connect the cable on the blocks db37 cfp-cb-1 connector that are on the existing system, so I can do tests with the new cDAQ replacement system without any wireless.  Unfortunately, the material is in another State, and I do not have a physical cfp-cb-1 Terminal block sitting in front of me to test to make sure that a db-37 cable mate correctly without running into the cfp-cb-1 module case.  Someone has he done this before, or know if a cable will connect without interference problems?  Thank you!

  All,

  I was able to put the hand on a block PSC-cb-01 and a fellow cable standard db37 male to this block of connection without any interference.  This can be useful information for someone in the future trying to update an old unit of PSC.  You can connect the test cables to the old PSC-cb-01 terminals to test your new system and easily return to the old system without having to release all the your existing connections to the unit of the PSC.

• can I connect a mac mini to existing imac?

  I have an iMac with a perfectly fine display 10.4, but I'm not able to upgrade more. I wonder if I can connect a mac mini and upgrade using my keyboard and screen of the iMac.

  Hi readingteacher,.

  Thank you for using communities Support from Apple. I understand that you want to use your older iMac as a display of your Mac Mini. I am pleased to provide you with some information about this process.

  This article has some good information on what is needed to turn your iMac in a view:

  Use your iMac as a display with the target Display Mode

  As you can see, it takes an iMac compatible with 10.6.1 or later. Since your iMac seems to be a G5 with 10.4.8, I'm afraid that it is not compatible with this feature.

  I hope this helps clear of the things up. See you soon!

• Can I connect a printer to ann existing adhoc WLAN?

  I have two Macs connected via a WLAN adhoc. Now, I want to connect a printer. I tried, but failed.

  According to the information of the printer company that should indeed not possible. Now I have 2 questions:

  Is • this information correct?

  Can • I install a second WLAN; and if so, where can I find advice how to set this second WLAN (steps to move forward)?

  Hans

  There are two types of Wifi network, the Infrastructure being the other type and ad hoc, you are referring to. While it is possible to connect two computers together in an ad-hoc Wifi type looks like the printer works with a type of Wireless Network Infrastructure. A Network Infrastructure needs to a central controller for example a WiFi base station.

  If both Macs have only Wifi connections and no Ethernet connection, it is possible to link them together in an ad-hoc configuration, it seems that in order to get one of the Mac to act as a controller that is operating in Infrastructure mode, I think that you need to be connected to a network via Ethernet, can be configured to 'share' this Ethernet to Wifi connection. Even in this case it is not certain that a Wifi printer will accept this as it is still a very stripped down Wifi configuration.

  If you had not a hardware base station Wifi for example an Apple Airport Express, which would certainly be able to do the work for you.

  Another approach to consider connects to the printer via USB to one of the Mac and then share the printer from the Mac. The second Mac would then be able to print to the printer via the Mac. It should work even with the two Mac computers via an installer of the adhoc Wifi.

• App installed fish cactus, can you connect is no longer at the admin page

  Hi all

  I'm having a problem where after I installed app Cactus of fish I can no longer connect to my admin page. Previously, go to myaddress:80 would bring me to the admin page. Now only myaddress:80 / admin leads me to the admin page and it crashes until he tells me "ReadyNAS 'Admin Page' is in offline mode." I guess it's a problem with the apache configuration (the system uses apache, OK?) I have SSH access, so if anyone can point me in the right direction it would be much appreciated.

  Thank you

  L

  The fixed. There was a site called activated phantom fv-000-http causing trouble. I deleted it, restarted apache and now http://localhost/admin redirects to https://localhost/admin.

• can you connect 3g usb modem to the computer than to wireless

  IM using a dell Inspiron 1525, who says: it has a wireless card, but I want to use my USB 3g internet to connect to the ps3

  Hi Richard,

  You can read the following article and see if it helps.

  Using ICS (Internet Connection Sharing)

  However, this will not work wireless. It requires a wired connection between the laptop and the game console.

  Hope this information is useful.

• can you connect the SFP - 10 G - SR low-support to SFP 1000BASE-SX?

  Hello world:

  today I use the SFP + 'SFP - 10 G - SR' in Cisco Catalyst 2960 S-48TD-L connect to the SFP 1000BASE-SX to 6509 WS - X 6724-SFP module.

  the port setting is master, but they do not work, even the light don't flush. Then, I also use the SFP 1000BASE-SX to replace SFP + SFP - 10 G - SR in

  2960 S-48TD-L, then they cany working.

  I look to the top of the cisco data sheet, there is no roadmap to satament database 10G sfp + can't low support 1 G sfp. So, I want to confirm the problem.

  Otherwise, the 10 FPS + can only use for 10G SFP +; can't go down the suport 1 G SFP.

  This means: If you want to use the 10 G SFP + the other old device also need to replace.

  Thank you ~ for your help!

  Hi Marvin,.

  I found this conversation today, because I'm looking for an answer on a question similar to the question that Jerry asked, at the opening of this discussion.

  So my problem is this. In a certain place, I need two 10 GB and a connection of 1 GB on an optical cable. To cut costs, I tried with WS-C2960X-48FPD-L, but because it contains only two ports of SFP +, I tried with two WS-C2960X-24PD-L which will be connected with the battery modules.

  Then, having two WS-C2960X-24PD-L, I have 2 x 2 ports SFP + 1 GB. There are two open questions:

  1. can I put 1 GB transmitter SFP module SFP + port (that I have a connection of 1 GB at remote site)?

  2. can I use two switches to 24 ports mentioned 2960, in a way that I use one of them for the two connections of 10 GB (using ports SFP + 10 GB connection) and the second member of the battery so that we (2 available) port SFP + is used to 1 GB SFP connection (using the SFP port + as mentioned in question 1)?

  I'm not sure if your previous statement covers my questions, because it is not clear if the 1 GB SFP transceiver can be inserted in the port SFP + WS - C2960X - 24PD - L (or any other a port SFP switch +).

• Can you connect the Sx20 Webex Connect to Callmanager without a VCS?

  We have a few autonomous sx20 who use webex connect, but would they be able to communicate with callmanager and video settings.  Is there a way to do this?

  CCM 8.6

  Well, you're right, by selecting a native of CUCM record will cut you with the service of WebEx telepresence (Callaway).  There is no easy way to accomplish what you are looking for without a VCS.  You are connected to a cloud service, which performs the detached from the internal network with CUCM calls comopletely.  Control of VCS and highway it would through a standard deployment.

  I would not recommend this, but the only way to achieve this would be to manually edit endpoint a record of CUCM and then back to WebEx TelePresence every time.  WebEx TP will allow you to re - register the same endpoint with the MAC even point several times. The problem is that of workaround does not fit.