can you install software for vista 32 bit on a 64-bit prossesor

Similar Questions

• ThinkVantage software for Vista 64 bit upgrade

  Hello

  I'm curious to know where I can find the Thinkvantage for Vista 64-bit software.  I bought my T61 with Vista Ultimate (32 bit) in 2007, but decided to downgrade to XP due to performance issues.  I have used XP for some time now and has recently purchased and upgraded to Vista Ultimate 64-bit.  I've been downloading drivers from the Lenovo Web site, but I can't find the DVD software and some other applications.  Anyone know where I can go to find?  2 years ago, I have created the Vista recovery CD but I don't seem to be able to pull software out of it.  Anyone know where I can go to get the software miss me?

  BTW, yes I know that the original Vista Ultimate license includes 64 - bit.  I didn't know that until the after that I bought a new copy of the software.  I don't even know if Lenovo provides CDs upgrade to Vista 64-bit.

  DRM for your help.

  George

  The missing applications are only distributed in C:\SWTOOLS on the preload factory. Think that they will work in both Vista 32 and 64. If you do not save SWTOOLS 2 years ago, your only option is to install Vista 32 on a spare your recovery disk hard drive and copy it.

  I do not see a clean installation guide Lenovo T61, but here 's mine for Vista 32 on T500.

• Can you install Hyperion EPM machine 64-bit with windows8?

  Hi gurus,
  
  Can you install Hyperion EPM machine 64-bit with windows8?

  There are 64 versions of windows available in delivery--"Oracle Enterprise Performance Management System (11.1.2.2.0) Media Pack for Microsoft Windows x 64 (64-bit)"

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Computer Toshiba laptop does not start after trying to install SP2 for vista 32 bit

  Tried to install SP2 for vista updates, it stagnates at 12%, message saying a problem has been detected and windows has been closed to protect the computer. At the bottom of the error message screen, it reads, technical info-stop OXOOOOC1F5. Windows doesn't start at all now, has tried running safe mode, pilots seem to load, then it returns to the screen error message with the same problem said. Nothing seems to work, tried same recovery disk came with the computer, it says it is loading files, then it returns also to error message screen. Computer came with vista pre-installed, so I don't have this drive to try. Someone at - it solutions? Very frustrating, how do I search problem when the computer will not start at all? Help!

  Follow the info below to try a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  If yours falls into the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.
  You can do a system restart tool, system, etc it restore.
  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  Mick Murphy - Microsoft partner

• Error 1500 another installation is in progress I can't install software on Vista SP2

  Original title: cannot install software on Vista SP2

  I can't install any software, on SP2With Vista questions such as:

  * configuration of the program just hangs without anything shown in the progress bar

  * error a 1500 another installation is in progress

  * have known for some time

  very slow (several hours) updates to the OS on the system shutdown

  Was able to install v2.0.4045.907 FixCleaner recommened (guess not use msi?) - fixed nothing

  Windows install 4.5.6002.18005

  msiexec /Unregister

  msiexec/regserver

  sfc/scannow not = no breach of integrity

  has run cleanboot selective startup without MS apps - same question

  without running the msiexec process

  No file *.ipi in c:\Windows\Installer

  No InProgress subkey

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer

  services.msc

  default settings - not started / the manual value

  changed - start Setup / set to automatic

  Hi Keith,

  Sorry the methods above do not help us to your question.
  You are currently on your Windows updates?
  You could check and see if the following article will help you.
  Article 971058 - How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  It could also help:
  Article 2438651 - how to troubleshoot issues that may occur when you install, uninstall, or upgrade a program on a Windows computer:
  http://support.Microsoft.com/kb/2438651

  Please let us know if one of these suggestions help you.

  Marilyn

• I have the software for the wheel to feed Force Microsoft SideWinder, but I can't install in windows vista 32 bit home edition

  I have a real problem, try to get the sidewinder software to install to my wheel feed Force Microsoft, it sends a message indicating that it has problems of compatibility with the program and stops the installation

  the name of the program is SWGameEn.exe he used to work in XP Pro why used it work in Vista 32-bit Home

  Hi Mike I finally found a program that works with the Sidewinder wheel and Vista, it is only a small program, but it allows you to program all buttons on any controller.

  I'll post a link here little time if you want me too, that way another person might benefit from also

  http://www.deinmeister.de/JCT.htm

  It's all in German I think lol, but it's pretty easy to get out. Just run the program with your gamepad or steering wheel plugged in and press a button and watch the program, if button 1 is pressed then follow him up to the line upward with an empty square (left) and then click on the empty box (you will be asked for a key on the keyboard) press the key that you want to work with the key #1.

  Then to activate the button make sure you click area is pressed next to the inline box keys with line #1-si someone can not understand my instructions, they can send me an email and I'll send them back with pictures that explain it better

  Click on my name

• X61tablet: Fingerprint software for Vista 32 bit is missing

  If you enter the matrix of the X61tablet driver for fingerprint software April 4, 2011 5.8.6.6874 link to an empty page.

  If you cross a "use fast track" - "Download Drivers and software" (version!) wrong fingerprint software appears and can be downloaded:

  Fingerprint Software 5.6 for Windows Vista (32-bit), XP (64-bit) and 2000
  (Windows 2000, Windows XP, Windows 2000, Windows Vista)

  Is now resolved

• How to install fixitcenter for vista 64-bit

  I could not install fixitcenter program on my laptop. (vista 64 bit)

  This show of error on the desktop:

  "fix installation Center has encountered an error.

  an unexpected error has occurred. Please close try to run Setup again later. »

  Please help me how I can solve and install this program.

  It is possible that the installation requires you to be connected to the internet and required to help with the installation page is currently unavailable.  All you can do is as it says, try again later (I cant get onto the version online because of a problem at the moment-so maybe it's the same problem that is causing your problem).

  You can try to download it again in the event that your initial download was bad.   Save it to your desktop.  Right-click on it and click on run as administrator (in case this is useful).  Make sure that you are connected to the internet when you are installing.  Here's a download site: http://fileforum.betanews.com/detail/Microsoft-Fix-it-Center/1271432341/1.

  You realize that Microsoft Fix - it Online Center is still availalble and this program is not necessary unless you work in offline mode (and it may need to go online to help even in this case).  Troubleitcenter.support. Microsoft.com is also a beta product so there will be some bugs in which can lead to problems or do not work as it should - it may be better to wait until it is officially released - but it's up to you..

  For now, the error you have given (if accurate and complete) does not suggest a Vista problem, but a problem with the installer or the process.  Try the above, but basically be patient.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can't install software for HP Photosmart C4200 Photosmart on the new Windows 7 computer

  I'm unable to install the software for a HP Photosmart C4200 Photosmart on the new Windows 7 computer.  Says it's not compatible with OS.  Is there any solution for this?

  Hello

  Because the CD is not compatible with your operating system, you can download the software on the web.

  Please follow the link below for the software dowsnload Windows 7 from your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-74842-1&cc=us&DLC=en&LC=en&OS=4062&product=3192753&sw_lang=

  Make sure you do not connect USB until prompted to do so during the installation.

  Shlomi

• Error 0x800f0900 while installing SP2 for Vista 32 bit

  I tried all of the procedures contained in the web site; including the preparation and the hotfix Tool package.  The whole process fails when you restart where he reverts the changes.  My version of Vista is 6.o which includes SP1.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  NOTE: Judging by the previous discussions on the Vista SP2 and 0x800f0900 (internal unexpected XML parsing error) error, you can see the effects of a hijackware infection! Good luck. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Can you install Oracle 11 g 32 bit and 64 bit clients on the same machine AIX 6?

  We have a supplier who needs a 32-bit client on the application server which is AIX 6. We already have 11g 64 bit client installed there. So, we can install both or I am interested in a the first 64-bit client deinstall?

  Yes you can, please check the documentation: http://docs.oracle.com/cd/E11882_01/install.112/e24334/toc.htm#CHDIGJJB

  From Oracle Database 11 g Release 2 (11.2), the client software 64-bit does contain the binary 32 bits client. If you need the 32-bit client binaries on 64-bit platforms, then install the 32-bit binaries from the 32-bit respective client software in a separate Oracle home.

• I have error code 8024200d when you try to update and install SP1 for Vista

  I have error code 8024200d when you try to update and install SP1 for Vista. I'm currently running Vista Ultimate. Any help would be appreciated.

  Thank you!  Matt

  Matt,

  The 8024200d result code indicates WU_E_UH_NEEDANOTHERDOWNLOAD
  Update Manager did not install the update because it must be downloaded again.
  Suggest you download and Save the complete stand-alone package of Vista SP1.

  Links to the standalone versions are on this page because you validate that the edition of Vista is x 86 (32-bit) or x 64 (64-bit). You can see the architecture of the system of opening in the Panel and next to the search System system type: Windows Vista Service Pack 1 (SP1)

  Before attempting to apply the SP1 please consider this information-

  If you choose to install Windows Vista SP1 via the standalone installer available on the Microsoft Download Center, Microsoft recommends that you first check Windows Update and install all drivers in option. Read the Articles in the Knowledge Base 948187 and 948343 for more information.

  Suggest you to create a folder on the root drive (the drive where Windows is installed, usually C:\) and name SP1.
  Move the downloaded Service Pack in the newly created folder.
  Disconnect all the devices, printer, external USB hard drive, etc.

  Then, Configure the system starts in a clean condition
  After you restart the worm as a clean boot, apply SP1.

  If there is still a problem with the installation of SP1, MS offer support chat and free e-mail to "help you to download and install service packs" here-
  Microsoft technical support

  Or, you can post here - MowGreen Windows Vista Service Packs/Windows Server 2008 Service Packs Windows IT Pro - consumer safety Expert

• Can I upgrade vista ultimate 32 bit sp2 for vista 64-bit?

  Can I upgrade vista ultimate 32 bit sp2 for vista 64-bit?

  Ranging from a 32-bit operating system 64-bit operating system is NOT a upgrade path.

  It must do a clean install with a full version of a Vista 64 bit operating system.

  How to do a clean install:

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean installation.

  And save all data because the hard disk will be wiped.

  See you soon.

  Mick Murphy - Microsoft partner

• Can you install Windows XP Professional utility: Setup for floppy diskettes Boot Install on a flash drive?

  Can you install this on a USB flash drive, if you don't use no floppies? If you can, how?

  Can you install this on a USB flash drive, if you don't use no floppies? If you can, how?

  In addition to the above answer, even if your computer supports booting from a usb key, based on my experience, it is easier to use a cd rom. usb Flash drives can be very difficult to use to install windows. I did a couple of times but not without problems. If the computer you are using is able to boot at all, and you do not have a cd rom USB that you can try to install windows over the network.  Install windows from a flash drive is a long process. $30USD for a usb CD-ROM.

  See the article on the link below if you need to install a flash drive.

  Install Windows XP using USB Flash disk / Flash Drive - step-by-step Guide

• Toshiba Dynadock PA3542E-2PRP drivers for Vista 64 bit

  Hello

  I bought a new Toshiba Dynadock PA3542E-2PRP, and I have Windows Vista 64 bit installed on my laptop.
  The dose of CD does not install drivers because there is no Vista 64-bit drivers on the CD...

  Can someone help me?

  Hello

  I checked the page European driver Toshiba and there are the drivers and software for Win XP and Win Vista. There is no special driver 64 bit Vista.
  My opinion on the reasons why 64-bit drivers are missing, which is the Dynadock for Vista 32 bit software software should work on Vista 64-bit.

  Have you tried to install the 32 bit Vista software?
  Check it!