can you put in place 2 prints on air2 ipad?

Similar Questions

• How can you put in place the first generation Airport Express with Yosemite

  Is it still possible? If this is not the case, can itbee with an iPhone or an iPad?

  Athanasios

  Are you sure that you have a 1st generation AirPort Express?

  It was the 1st version of 802.11"n" products... and you will probably have a lot more older 802.11' b/g ' device that was used long before that Apple has started using the name of 'generation' in 2008.

  Please look carefully at the side of your AirPort Express Terminal to locate the model number. It is difficult to see gray inscription on white background, so you may need good lighting and reading glasses.

  The model of a 1st generation AirPort Express is A1264.

  If you see A1084 or A1088, these are much older devices "b/g" which ranks Apple as obsolete... then they have not been supported for the past 3-4 years in the latest operating systems.

  So again, you have... or can borrow... a Mac running Leopard (10.5.x) or operating system Snow Leopard (10.6.x) or a PC that has AirPort Utility for Windows installed on the device, you can administer the older devices, A1084 and A1088 like that.

• can you put your mail icon in the dock on your top menu bar?

  can you put your mail icon in the dock on your top menu bar?

  N °

• Can you put a 500 g SATA hard drive in Pavilion a750w?

  Can you put a 500 g SATA hard drive in Pavilion a750w?  The bios is version v3.26, and the operating system is XP with SP3.  40 gig HD is full and you are looking to replace it but do not know what the size limit is with this bios version.

  Here are the specifications of your HP Pavilion a705w desktop. This is based on the assumption that you converted the 5 and 0 and the fact that you mentioned a 40 GB hard drive.

  You already have the most current version of the BIOS of your computer and running the most recent service pack of Windows XP. Your computer and the operating system should support a drive of 500 GB without problem. The only problem is that your computer isn't any SATA ports, only 66/100 IDE (PATA). Look at local retailers and online for the IDE drives.

• Can you put a redirect in the Tablet, or the design of the phone, code left the office as is?

  Can you put a redirect code in the metadata title, or the design of the phone, Tablet left the office as is?

  Don't know if that's what you're looking for, but found an article for the use of redirects in Muse

  Redirect page in Adobe Muse

• Can you put into fields in all capital letters

  Can you put into fields in all capital letters?

  Thank you

  Use this code in the custom field validation script:

  Event.Value = event.value.toUpperCase ();

• If you pay the $53,00 per month can you put creative cloud on a laptop and desktop computer you have in your home?

  If you pay for creative cloud can you put on a desktop and a laptop for the $53,00 per night?

  Hello

  You can have the creative cloud installed and signed in on two computers as long as you don't use it on one at a time. Download and install as you did on the first computer, sign in to your Adobe account on the Adobe using your Adobe ID website, download the desktop app from clouds, then download the software. Sign on a computer that should not be used: log in and log out of the desktop Adobe Creative Cloud application

  You can download the installer for Creative Cloud from here:
  Creative cloud help | Creative cloud desktop.

  After you install the creative Cloud desktop application, you will need to sign in with a login password and Adobe. Then you can install applications. This link provides more information and step by step instructions, if you need: CC help | Download, install, update or uninstall applications

• How can you put a border around a Panel in muse when you have set up for a page 3 panel

  How can you put a border around a panel when you use the layout of the 3 panel Muse

  You mean a page 3 "column. You can take a shape tool and make a box that fits the left and right columns and then adds a line to them.

• How can you transfer all data and software form old iPad new iPad?

  Hello: I have an iPad 9.7 "display of 2012 with 16 GB of storage. I'm about to storage now and are considering buying an iPad 2 Air. My question is, how can you transfer all the info from my old iPad to the new without starting from scratch?

  Thank you, Gilbert.

  < email published by host >

  Whence the content come of for example you have the music on the iPad, and if so is sometimes copied from CDs? You can copy purchases on iTunes from your computer via file > devices > transfer purchases, make a backup of the iPad, and restore this backup on the new iPad (music, videos, etc. is copied from the iTunes library, not the actual backup, so you will need these items in the iTunes library).

  Transfer to a new device: transfer the contents of an iPhone, iPad or iPod touch to a new device - Apple Support

  (Because these are user forums I asked guests to remove your e-mail address of your post, it is not a good idea to post it on any public forum.)

• Can I put a CP4005n to print double-sided like the CP4005dn support?

  Hello

  A like custumer upgrade a CP4005n to support duplex printing.

  Can I put the CP4005n?

  Custumer product: CB503A CP4005n

  Thank you

  Cyril

  It works!

  I bought this parts:

  - RM1-1784-090CN

  - RM1-1785-000CN

  - RC1-5043-020CN

  Installation: ok

  Implementation via the printer setup menu: ok

  Test: ok

  

• Can you put Microsoft Mac iPad pro

  I want to buy an iPad pro and sell my Mac. I need to use microsoft office for Mac. Can I put this on the pro?

  You cannot use a Mac app on iPad. You could put MS office iPad apps on it though.

• HP Deskjet 3520 - why complete dump HP cartridges after putting in place new printer?

  I came across the question of printing black ink not spilled on my printer HP deskjet 3520.

  At first, unaware of this dysfunction, I inserted a brand new original cartridge HP 364 XL because the black ink level was low and I thought that it there was not enough black ink left black.

  It has not solved the problem. After looking around on the web and on this forum, I understand that it is rather a feature of these printers. So I called HP support.

  Although the warranty has expired by a month or two, HP agreed to replace it and sent a new printer (I appreciated!).

  When I want to set up and start this new printer, it refuses my brand new HP364XL and requires that I have insert the cartridges that were provided with the new printer.

  Why should I unload a brand new - just opened but HP black unused original cartridge?

  How can I get this new printer to accept it?

  I do not understand why it should not:

  -C' is a waste of my money: the cartridges are not cheap. Therefore, it is not really respectful of the customer.

  -C' is to lose material is environmentally irresponsible. It's not respectful of the environment.

  -C' is simply absurd that HP printer doesn't accept HP cartridge.

  Those are the values that HP really wants to convey?

  Overthesea,

  I'm guessing here - forgive the ignorance of the truth of the facts.

  HP stands behind its products - it has been proven time and time again that this is the case.  I am pleased to learn that you have received your replacement printer.

  I suspect that your new printer replacement wants you install installation cartridges required for initialization of the printer.  This is a procedure that is common to the new printers technology.

  Once this process is complete - a few minutes really, even if you could leave the SETUP cartridges in the printer, you can replace cartridges INSTALLATION with cartridges regular (expensive) HP that you want to use and continue life as you know.

  If this is the case, the cartridges that came with this new printer are indeed marked the cartridges 'Setup '.

  Your cartridges in a bag well sealed for a few moments and let the printer initialize correctly with its new cartridges.

  This can solve the problem.

  For later:

  If you seal these cartridges of INSTALLATION very well (after removing the printer), you might be able to use them later if the printer decides to restore in an error state and want to use it again.  It is rare; He arrived.  Just a thought...

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Click on accept as Solution when the answer is a good solution or workaround!

  Although I strive to reflect best practices of HP, I do not work for HP.

• can you put a line autour just the button to active state when you land on this page

  I have a site and I use a very subtle color for my active state. Can I put a line autour just the button to active state when you land on this page? I thought it would be useful to highlight the button without killing the color.

  Site = www.nelsonatnite.com

  Hi Nelson,.

  Yes, you can STROKE around the button of the active state. You must select the button, then go to the States, click on 'Active' and add STROKE.

  Kind regards

  Aish

• can you put TV shows stored on a disc and if so, how?

  I recorded a show on Virgin Media box and I would put on a disk or usb so that I can take it to school because it is education. I'm gratefull for any advice please help thanks.

  Since you ask on a standalone DVR, the best place to ask would be supported from Virgin Media:

  http://www.virginmedia.com/contact/

  http://community.virginmedia.com/

• Please can you put the "Open a new tab" button back where he was on the right side of the tabs, or at least give the opportunity to put it there? Thank you.

  In the row of tabs along the top of the screen, there was an additional tab with a + in what you clicked to open a new tab at the far right of the tabs. As the tabs still float to the left and new tabs appear on the right, it was (in my opinion), the most logical place for it. However, the only two places I am able to put this "tab" are now on the far left, which is illogical, because the new tab appears on the right, or in the toolbar and other tools. It's enough, but I'd rather see the 'new tab' tab back where she was.

  Moreover, the option to put it on the right end of the Ribbon tab did not work up to this latest version of Firefox, but I'm sure you know this!

  Open the view to customize and use the default for "Open a new tab" button back where it belongs.