Can you run Jolt via Firefox OS on a smart TV, via app or browser?

Similar Questions

• Can you run the Interface of Inspection VBAI only once and then once more by a guest user?

  Can you run the Interface of Inspection VBAI only once and then once more by a guest user?

  I don't think I understand what you are trying to accomplish. You can connect a button on the front of the smart camera and trigger each acquisition. In VBAI check the triggered Acquisition under the tab trigger for the step to acquire Image (smart camera).

  Your smart camera is hooked up to a monitor? Is there something that you must do in LabVIEW that you can't do in VBAI about the step of user input?

• can you run two separate vi in parallel

  Can you run two separate Vi in parallel? It will be considerably slower response?

  Here are some more details.

  Yes, you can them in parallel without any problem.

• Can you run Firefox 21 rather than Firefox nightly on Windows 8?

  I was wondering if you can run the standard version of 21 Firefox on Windows 8?

  You can. However it does not support Metro on windows 8

• can you run two sessions of firefox, in privacy and confidentiality not in a mode

  You can run two Firefox sessions, one in privacy and confidentiality not in a mode.
  Basically, in chrome, I can connect facebook with 2 different account, I opened got chrome FB and login (account1), then I click on ctrl-shift-n and go on FB and login (Account2)
  Here, the question is, is it possible with firefox?

  Use-no.-line switch remote control to open another instance of Firefox with its own profile and to different instances of Firefox running concurrently.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• Three questions.  The heart rate monitor now plays nice with the third-party applications?  Can you run these third-party applications, without the link to your phone?  How much storage?

  My experience with the original watch is that the heartbeat was working fine with apps in the House but does not work well with third-party applications.  Aboriginal health applications were sub par at best.  In addition, he wouldn't these third party apps (Strava), unless you were related to your phone.  A new doesn't do me much good if it is always the case.  Finally, it's great that you can bind your helmet now but what storage is the watch have?  I am not unrealistic, its understandable if its not much, but I hope that it is enough that a few apps and music enough to pass through a 4 hour tour.

  1 WatchOS3 made major changes in this area, and 3rd party applications get access to things like HR. OS3 also makes everything much more receptive. 3rd party applications will need to be updated to play with the HR monitor.

  2. you can run applications 3rd party without the phone with you, but for your type of application, you'll want a series 2 with GPS watch. The likes of Runkeeper OK working in the older shows, but without GPS, they do not really work you need. New - 3rd third party apps will need updates to work with the GPS watch. OS3 software has been available to developers for a while now, so I expect software updates only very quickly. I don't know if or when 3rd parties had access to the equipment and GPS devices, s, then it may be some while before they have series 2 updates.

  3. you can store 2 GB of music. How much music that is depends of course format and quality, but certainly several hours.

  Hope that helps

• Can I run Skype through FireFox/Mozilla without installing Skype on my laptop?

  My laptop runs Windows Vista Edition home premium (SP2) and Windows Installer does not so I am unable to install or uninstall applications such as skye. As a result, I'm looking for a way to run Skype so that I can't install it normally. Is add a plugin or other on who will meet my needs?

  It may be a good idea to fix the Windows Installer if you have problems of.

  To resolve the problem, try first to re-register the service Windows install.
  To do this:

  • Tap Windows + R to bring up the Run dialog box.
  • Cmd open by typing cmd' and press enter
  • In cmd type: msiexec /Unregister
  • Then type msiexec/regserver
  • Type exit to exit cmd after that try to run the installer again.

  Let us know the results.

• How can you NOT update to firefox 5.0 beta?

  I have firefox constantly nagging 4.0.1 update me to beta version 5.0. He also says that the beta is prone to crashes, data loss, end of memory leaks and humanity.
  So there no button "I DON'T want TO not upgrade to beta versions" anywhere, how it prevents nags to appear?

  It is possible that you are still on the beta update channel, if you have already installed a release candidate or a beta version of Firefox 4.
  
  You can check that in looking at pref app.update.channel on the subject: config page.
  
  If the value of this pref is beta so it is best to download and install the latest version of Firefox 4.0.x.

  • http://www.Mozilla.com/en-us/Firefox/all.html
  • http://www.Mozilla.com/en-us/Firefox/channel/

• When I go to play a game, they are all lag and all fps are reduced. I'm going to can you run and it say is I only have 32 MB dedicated video ram.

  Some day its there I have a steam called civilization V gold edition game and now when I go to play a game that they all lag decreases all the fps I'll can run and he say, I have 32 MB of video memory dedicated when the game I play world of warcraft need 218 MB dedicated and before that happened im using Intel (r) of the hd 4000 chart how I have difficulty This im using a dell 8 17.3 core i5 window

  Original title: dedicated video memory

  Hi Nick,

  You may experience this problem if a graphics card driver is damaged or outdated. I suggest updating the graphics card drivers and check to see if it helps:

  The drivers can be found here;

  file ZIP 32-bit: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22611

  file EXE 32-bit: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22610

  64-bit ZIP file: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22652

  file EXE 64-bit: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22605

  You have the possibility to change the graphics memory in the BIOS. You must go into the bios of the computer/laptop and see what are the options that it offers to the shared memory. If you don't know how to get there, check the documentation of the computer/laptop or from the manufacturer (Dell's Support). You can also find information on what are the maximum value of the shares.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this helps, if you need help on windows let us know we will be happy to help you.

• Can you run various NUMA parameters on ESX host?

  Hi all

  We are running ESX 3.0 and have experienced a problem with some our fair virtual servers randomly close I googled the error message displayed in the case where newspapers that lead me to the article below in the VMware KB.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 10213

  This article is about the exact message we receive, so I am confident that its troubleshooting procedures should work as we run the NUMA architecture in our environment, but I have a question before the change of management being curious to know a bit more information regarding hit her on the effects of his settings of NUMA in our environment.

  That's why we have taken two ESX hosts in our environment, my question was the following can I make NUMA changes on an ESX host and then migrate (if they aren't already) servers that have had the shutdown problem random overall to the ESX host that has the correct settings of NUMA as detailed in the article above?

  If any of you out there have done this before? If so is there any bad shot on the effects that I should know about? Any comments or advice you can give me on this would be greatly appreciated! Roll on the migration to VSphere 4.0!

  Thank you

  Nick

  Hi Nick,

  That's why we have taken two ESX hosts in our environment, my question was the following can I make NUMA changes on an ESX host and then migrate (if they aren't already) servers that have had the shutdown problem random overall to the ESX host that has the correct settings of NUMA as detailed in the article above?

  No Yes No problem with that. The VM themselves are not aware that they are running on NUMA hardware, so will not notice. The bug is because the vmkernel does not release memory properly when a virtual machine gets on demand on one NUMA node other than that which has been started the. Configuration Numa.MonMigEnable effectively disables this behavior at the host level, but this does not disable the advantage of NUMA so you may notice a performance decrease.

  Not sure of your patch levels, but apparently it was 'fixed' with this patch: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2066306

  Kind regards.

• Can you run Flex Builder 3 and Flash Builder 4 side by side?

  I have what I want, it's a relatively simple matter. Society, I am currently working a number of Flex 3 projects on track to completion or in the last part of their development, phase, but we use SVN version control. It is my understanding that while you can use Flash Builder 4 to create and/or edit and publish Flex 3 projects, once you are using FB4 on a project from version control, anyone who removes this project svn will have to FB4 allows you to change the project. Assuming that is right, can get us FB3 and FB4 installed on our desktops and switch between them according to the projects we use? We hope our developers migrate FB4 they encapsulate the development on Flex 3 projects, but we might need developers working on Flex 4 projects to help on the stages of our Flex 3 applications. Just to clarify: we are both FB3 and FB4 executable running at the same time, just the possibility of close FB4 and launch FB3 and vice versa without going through error or compile questions. We use install it standalone FB, not Eclipse plug-ins, btw.

  Yes - to my knowledge, you can have FB3 and FB4 installed on the same computer without conflict.

  Each separate default version uses the workspace, as soon as you try not to share workspaces between both versions, you should be safe.

  -Chris

• I have windows xp and I used to have Firefox 3.6.16. I downloaded Firefox 4 and I have so many problems, I also Kaspersky as my safety for my PC. Can you help me recover Firefox 3.6.16, please?

  I just want to know "how to get back Firefox 3.6.16? I tried so many times to download, but nothing happens. I use Internet Explore earlier and I really prefer Firefox...
  Please HELP me to recover my 3.6.16 Firefox?

  You are welcome

• How do you get directions via App places?

  My application generates an address. My user wants to get at. So I integrate with the application of Native Places.

  I need to get directions to this address using the application of plans/places.

  I am able to pull up the places in my application selector.

  Miss me the part about how to link the two things... Anyone of you knows how to do this?

  Thank you

  I got the answer from @Shadid

  In case anyone is wondering.

  Add the location to the database of contacts

  Selector places has a tab for contacts.

  Then, you can use RouteMapInvoker to nav

  See you soon!

• Can you do still function of shade during the passage of the apps. IE: Hue / Itunes

  I was using Hue the other day and really love the app and my itunes turned off.

  Can update you the application so that other applications. still in service when using Tint? Especially Itunes. It would be so nice to be able to listen to music while capturing sunsets.

  Thanks in advance!

  Thanks a lot for your comments, CGamble.

  We love hearing feedback so that we make our applications better for everyone. Within the hue, click on the logo of product in the upper left corner. You will find ' give us your comments. Please share your thoughts there so that we can drop them and take into consideration.

  Let me know if you need anything else!

  -Kathleen

• Can you add an option to yoga, pilates and bar to this app?

  The 'other' option does not appear to accurately calculate these workouts.

  For the moment, you cannot currently add these things to the application of the workout on the Apple Watch.