Cancel/model of default slide

Similar Questions

• Cancel firefox as default browser

  I want to cancel Firefox as my default browser

  Hi, you should go to the browser that you want to use and set it as default within its parameters. You can also check if Firefox is your browser by - Make Firefox default browser.

  Even if Firefox is not set as the default browser, you can still continue to use it at any time!

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• Models of default PCB

  Ultiboard provides a way of redefining what contains the default PCB project?

  Now, as soon as you open Ultiboard and select "create new project... ', it opens to the design with no space.  What is cool at the moment, you draw your rectangle Board, add a title block, etc, etc, life goes on.

  However, we seek to keep our design as possible consistent layout between the different engineers.  So, what I would do is create a contour of the blank map, add a title block and any other area of descriptions of text that I want and then save it as the new default project template.  This way, the next time I create a new Board of Directors, I'm starting with my preconfigured cartridge and description of field arrangement.  Is this possible?

  Hello

  Multisim/Ultiboard includes the ability to create user models, essentially a Multisim file (for your schema) and Ultiboard file (for the presentation of PCB). Details can be found at:

  Quickly prototype with Multisim and Ultiboard user-defined models

  I hope this helps!

  Fernando

• ListView - Is GroupDataModel a model 'by default'?

  Hello

  I'm bring in C++ and I don't want to use QML.

  I'm trying to create a list similar to the blackberry platform which operates an icon, title, description and status.

  I was under the impression that the default behavior of the listview would show that if you define a datamodel

  with the properties of the standardlistitem was looking for. Is it not the case?  What I have to put up a ListItemProvider and ListItemListener if I want these features?

  I tried many variations of this (I guessed the names to reading the documentation):

  GroupDataModel * model = new GroupDataModel (QStringList)<>
  model-> setGrouping (ItemGrouping::None);

  QVariantMap map;
  map ["title"] = "Heading1";
  map ["description"] = 'Description ';

  map ["status"] = "Status1.
  map ["type"] = "item";
  model-> insert (map);

  What I can't understand, why is it always displays the description field. If I do not use

  'description', then it will display the 'title '.  Also, if I add more than one card, it always shows

  all that is sorted shows, is that right?

  In addition, the row created automatically based on the model are provide you? As, to create

  a tree would you basically add another card to a property of the map. for example

  Map1 QVariantMap;

  QVariantMap map2;

  map2 ['name'] = "Name2";

  Map1 ['name'] = "Name1"
  ['Child'] Map1 = map2;

  Hello

  I could be wrong, but I think that it does not StandardListItem. It is a component Visual which can only be used in QML.

  You will have to implement your own, take a look at cascadescookbookcpp for an example:

  https://github.com/BlackBerry/Cascades-samples/tree/master/cascadescookbookcpp

  If you need a thin selection border as in the menus of the Control Panel, it can be done using image 9-patch.

  > What I don't understand, why is it always displays the description field.

  It seems that the default implementation displays the first item in a container. In card keys are sorted, so it displays the description. If a QVariantList was it would probably display a first element instead.

  I believe you can create a map of maps and GroupDataModel it will treat as structure multi-level providing the correct childCount() of each level, but I have not tried. ListView can display two levels, but there is the rootIndexPath property to the value of the starting node. This page has more information on indexPaths:

  http://developer.BlackBerry.com/Cascades/reference/index_paths.html

  In dataModel custom layout of data can be of any type.

• You can reset a default theme to the default slide master?

  Hello

  I wanted to use a blade of default theme as a starting point to create a new custom theme.

  However, I accidentally saved the changes to the original theme in CP7 'white '.

  Is there any way I can reverse the changes and return to the original master slides by default?

  Thank you

  Denise

  Hello Denise,.

  Please go to C:\Users\Public\Documents\Adobe\eLearning Assets\Layouts\8_0\en_US there will be a file by the name of white.cptm, rename it to what it is.

  Then, go into C:\Program Files (x 86) \Adobe\Adobe Captivate 8 (32 bit) \Gallery\Layouts\8_0\en_US and copy white.cptm and then paste it to the location above

  Make sure you that Captivate should be closed during the operation.

  After gluing launch Captivate and you'll have, you have by default theme back.

  Concerning

  Himanshu

• Default slide quality optimized value

  Captivate v5.5

  Is there anyway to select the default settings of slides and all following slides added to a project?

  From what I see a project begins with the quality of each slide set as 'Low' and each slide added is also set by default to 'low '.

  I wish that all my slides 'Optimized' or 'High '.

  I know that I can select them all and change their quality as I go or later, but would be wise to allow that happen in Edit / Manager object styles or preferences at the beginning of the creation of a project.

  Maybe I'm missing the option...

  Noel

  Hi Noel,

  There is no way in the object Styles, slides are not considered as objects.

  I do not know a way to define quality parameters to optimized before starting a project. You may already know, was so happy about this, but since 6.1 the default quality is now optimized.

  This can be changed in the preferences, and if you do this before you open a project, it will be applied to all future projects, is to go to SWF size & quality, uncheck "Save Slide quality" and set the High option (optimized isn't there). This will will not change the quality during editing, but once published, you have lifted for all slides.

  Lilybiri

• Time display default slide does not apply

  Hiya-

  A demo of the software automatically saved to 3s by slide deck, and I would like to change the default view to 5s by blade.  When I change that in Edition/Preferences/Global/Defaults, it does not apply throughout the project.  No idea why?

  Thank you
  Kimberly

  What version, Kimberley?

  If it's CP5 or 5.5: it's in the properties, general Accordion Panel. You can select all the slides that must be changed and apply both to each other.

  

  Lilybiri

• Re: What is the model of default keyboard in a Qosmio G30?

  Hello
  I have a Qosmio G30-155 which I had arranged with additional partitions. Recently, I did a complete reinstall of Windows Vista, but I have not used the Vista DVD provided with my computer because it would destroy my partitions. So, I used a standard DVD of Vista. Everything works well except two questions: the computer is not responding to shortcut keys, or IR remote. Laptop infiltrates the IR signals, because when one presses a button on the IR remote control, a few lights in the remote and computer. However, nothing else happens.

  I installed several configurations of the packages 'remote control manager', "Added value package" and "Support" button, nothing helps.

  I checked the Device Manager, and my keyboard appears as a "PS/2 Standard keyboard. I guess that this setting is false, because this keyboard would not have access keys. So, this setting could be cause my problems.

  Can someone tell me which type of keyboard G30s were?

  Thank you and best regards

  I agree with Akuma
  There is no special keyboard drivers and those drivers are not needed.,.
  The Windows operating system, no matter if it of Vista or XP, uses the Microsoft keyboard driver.

  To enable the keys FN and Toshiba control buttons the VAP (value added package) must be installed

  You must ensure that you have chosen the correct drivers for the laptop G30.
  The G30-155 seems to belong to the series of PQG32E so chose exactly this model in the form of download number.

• maximum value instead of the default slider minimum value

  Hi all
  
  I have a PivotTable with section guest as cursor, the cursor displays 4 years, say 2010, 2011, 2012, 2013. It always points to 2010 when open the report, is in any case make it default pointing to 2013?
  
  Thank you
  Ling

  Try with like that,

  PivotTable with section calls as cursor is not possible.

  This is only possible in graphics mode. Drag the year column in the graphics sections area and check the display cursor.

  To get the default value pointing to 2013, apply sort descending on the year column order.

  Please indicate if this can help you...

• After you remove models 5 default the configuration section is now disabled.

  Hello world

  Just installed Photoshop CS6. I deleted the default templates and now I want to import my patterns.pat. I imported successfully, but the bosses of section is now disabled (gray). So I can't access my bosses! How can I activate the bosses again?

  Sorry, I just had to restart Photoshop, now it is activated again (in the properties of the layer)

• Models of default responses

  http://lh6.ggpht.com/_rhCtHYLiamQ/S5EUBvp6DfI/AAAAAAABXtY/SnEtDnGNKSc/S800/01_example.PNG
  
  Sorry, but the! doesn't seem to work properly, you have to click through.
  
  The first column is a dimension, the following 2 are measures of a fact table.
  
  Note how the style is different? I don't want to... I want to keep it consistent.
  
  Using true firebug, I note the different classes used.
  
  Column dimension

  <th style="background-color: rgb(231, 231, 247); font-size: 9px; color: rgb(0, 51, 102);" class="ColumnHdg" scope="col" dir="ltr">Product Desc</th>

  Measure column

  <th class="ColumnHdg" scope="col" dir="ltr">Basis Amount</th>

  I grepped the web folder and could not find any reference to the style tag in the Dimension column. These statements of inline css are the substitution of the ColumnHdg class, but I can't find where that is defined. It does not appear that the files have changed in the msgdb or res files (timestamp is the date of installation).
  
  So my question is, where else can I look to see where this style attribute could apply?

  Looks like you forgot to reset the OOB settings when installing OBIEE:
  Have a look here to reset the:
  http://obiee101.blogspot.com/2009/02/OBIEE-editing-system-wide-defaults.html

  concerning

  John

  http://obiee101.blogspot.com

• Model by default - table cell has no border when the cell is empty: IE6

  Hello
  
  I use the model: dark blue with the model of report of ratings in the region.
  I have a problem in displaying the result in IE6.
  
  When a cell is empty, I have white border in my table instead of edge banding.
  
  Do you know where I can fix this?
  
  Thank you
  
  Roseline

  Roseline,

  You must locate the corresponding css file and look for something like it's - t10 is the number of my theme so replace it with your theme

  Th.t10ReportHeader

  TD.t10data

  TD.t10dataalt

  and add the following code to the css classes:

  empty-cells:show;border-collapse:collapse;
  

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• Why do I need to select the next button twice to move forward in my quiz

  I have a number of true/false and multiple choice questions in this project.  The user still has 2 attempts to get the correct answer with your comments.  When they are done with the question they are asked to select the button "next".  Selecting the next button does not advance the slide of the first time well.  You must always select a second time.  I played with adjust active and inactive times on the timeline, but that doesn't seem to have anything to do with it.  Remove the 'next' button is not an option at this stage because it is mentioned in the audio commentary for each answer to each question. Any ideas?

  If you insert a slide of questionnaire based on the model of default slides, normal stacking order is that the next button is below the Clear key. Maybe you had already removed the Clear button? Try to use Arrange to change the stacking order.

  You do not click the next button twice, you must click the button submit once, then press on Y or click the slide. If the suspension point is far from the end of the slide, it will take a while, if actions are left to "continue". Change the point to pause to be near the end of the slide.

• WORDPAD: HOW TO DEFINE MODEL DEFAULTS TO SINGLE SPACE?

  My computer came with Wordpad.  The model 'by default' seems to be set to double space and I don't know how to change it so that the default value is a single space (ie. like my ad here). Itdoesn't seem to be a 'box' in the menu at the top of the page - on the same line as the font settings/size - titled ' line spacing: change the spacingbetween of text lines ") but it doesn't seem to work ! Or, at least, I don't know how to operate it. I tried to play with the settings made here, but nothing that I don't seem to make any difference.

  In the line spacing box, you should be able to select; 1.0, 1.15, 1.5 or 2.0

• Change default model navigation in the portal generator

  Hello

  I develop a portal 11.1.1.8 Webcenter portal using the portal generator. I created a new Navigation model.  Now, I want to assign as the model of default navigation for the portal, I had created.

  When I go to the link to Administration-> settings, Navigation is not editable. Other things like Page Template, Skins etc can be changed. Is there a way I can change the value by default model of Navigation for my portal?

  According to the link here: http://docs.oracle.com/cd/E29542_01/doc.1111/e27603/portadv_admin.htm#CHDDEIIA

  The navigation model for a particular site cannot be changed after creation. Instead, we can change the default Navigation model based on our needs.