Default slide quality optimized value

Similar Questions

• Slide the optimized quality vs high (24 bit)

  Captivate v5.5

  All my projects are created with quality optimized blade.

  Looking at my projects via our LMS the quality of some slides are poor compared to the original - lines down and through the slides, etc.

  Dept. computer SCIENCE suggested I download the project again on the LMS with quality slide 'High (24-bit)' and see if it improves quality when read through our LMS.

  While preparing for this I found that my project with a quality of "Optimized" Blade is 56.1 MB, but when past zipper 'High' quality the size of the file is actually slightly less, 55.6 mb. I expect the size of the file to be much greater when the high value.

  This makes me think that change it 'High' project will make no difference for the quality when read through our LMS.

  Can someone explain (in simple terms please) what is actually the difference in 'quality' of a project of v5.5 slides are all 'optimised' against one who has all the parts, set "High (24 bit)"

  Do you think that change a project to high 24-bit will improve the Visual quality through our LMS vs a project set to optimized?

  Thank you in advance,

  NEL

  Yes, it's a little known fact that using high quality 24-bit actually causes file sizes SMALLER.  Optimized is supposed to choose the best method of compression on a basis of slides while high 24 bit compression just apply the same setting to all slides and is used as the default output of the PNG image.  For some reason, optimized didn't bat raise 24 bits, even if most of the literature says it should.

  To get rid of your objects on the slide, try turning off advanced project Compression.

• Connection pool with the OAS and the optimal value of min/max

  Hello world
  
  
  I have ", works with admin app to implement under oracle application server connection pool. The current value is min = 0, max = unlimited which I think means not implemented connection pool.
  
  Anyway I don't have a lot of information on connection pooling, I searched the forums, but I'm not able to find any useful information.
  
  
  My Manager would like to know what is the optimal value for min/max for the database, is there a specific formula or a tool that can help me on this issue?
  
  
  Thanks in advance.

  Hello

  It's a specific formula or a tool that can help me on this issue?

  The value that you specify for the number of connections and connections Min depends on a combination of factors, including the size and configuration of your database server and the type of the SQL operations that
  your application runs.

  For connection pooling,.
  First, check what is the value of 'process' located on the end of DB (for your current value, check v$ resource_limit at the end of db)...
  for example if the process is set to "1000", you cannot set the maximum value of the connection pool to the end server application above 1000 it will crash your database.

  now on the server side Application.
  As a best practice, set the maximum number of open connections and Minimum of connections open to the same value.

  For more details on connection pool and its settings.
  Check "Setting Up Data Sources - Performance Issues" of the link pdf below

  docs.oracle.com/cd/B14099_19/core.1012/b14001.pdf

  Hope that it would be useful

  Concerning
  Fabian

• maximum value instead of the default slider minimum value

  Hi all
  
  I have a PivotTable with section guest as cursor, the cursor displays 4 years, say 2010, 2011, 2012, 2013. It always points to 2010 when open the report, is in any case make it default pointing to 2013?
  
  Thank you
  Ling

  Try with like that,

  PivotTable with section calls as cursor is not possible.

  This is only possible in graphics mode. Drag the year column in the graphics sections area and check the display cursor.

  To get the default value pointing to 2013, apply sort descending on the year column order.

  Please indicate if this can help you...

• How can I change default digital and enum values in a Cluster of Def Type Strict?

  I have a Strict Type Def cluster that contains 10 digital controls and a number of enums.  I have changed the default values for the digital controls in the strict Type Def, in customize mode, carried out a 'course values Default do' and did a 'apply changes' and recorded.

  This group is used in various places throughout the project and have not found a way to make the default cluster values change downstream.  Strict control Type (STD) Def seems to have good values on the front panel.  But if I place an instance of this on a white façade and do pass a wire of him in the block diagram with a probe and an indicator, I still get the old default values being passed against the STD.

  and still another approach is mentioned in my nugget on definitions of types found here, where I include this picture

  

  To illustrate how a wrapper around the constant type-def avoids not only the "problem of the explostion" (largely set by the new LV 2011 for display as icon feature) can be used to set the defaults AND allow some documents explain what, where and why.

  Ben

• OfficeJet 6700 Premium - how to set the default print quality of 'normal' of the "draft."

  Hello

  Thank you for your help.

  I have a printer/all-in-one Officejet 6700 Premium.

  Most of the documents that I print is for internal purposes, so "Draft" quality is sufficient.

  The default factory on the print quality setting is 'Normal '. I know how manually enter and restore the "draft", but I'd rather have the defaultproject, so I have to reset it manually each time.

  I could not find how to permanently fix the draft quality defect.

  Again, thank you for your help.

  George Mathis

  Thanks George,

  which is fully answering my question indeed

  Please follow the steps below to change the quality of the printer:

  1. Click the Start button.
  2. In the menu, click devices and printers.
  3. Right click on the HP Officejet 6700 icon.
  4. Click Printing Preferences.
  5. Enter the tab paper / quality .
  6. Select the project in the area of quality parameters.
  7. Click OK to save the settings.

  Now any future printing will be in draft quality.

  Kind regards

  Shlomi

• Slider with integer values only?

  I want to create the slider which accepts integer values only.

  For example: 1.0 to 5.0, step: 1.0

  How to do this?

  In a Word, DIY there is no entire cursor in Cascades.

  Wrap the cursor (ongoing) standard floating point in your own class.
  Listen to the signal valueChanged (float) and immediateValueChanged (float).
  Make your own signals when the cursor moves to one discrete value to another.
  Fix the position of the cursor continues to nearest discrete value in the signal valueChanged (float) handler.

  For each continuous cursor position you will need to find the nearest discrete value.

• Slider with own values then Grand Total bars.

  I created a type of Calculator in Flashpromanager.new which will be used to give the visitor an idea of how much money can be made on a Web site.

  The provision would be to use the sliders that the user could move to the left or to the right, then a dollar value seems based on the position of the cursor.  Another slider below or next to it would represent another value then, of course, a total area by adding that show sliders/values above.

  Shared thoughts or ideas are appreciated.  I worked with SwishMax and FLA in the past to create calculators, but I hit a wall with this idea.

  Once again thank you for your time in advance.

  Ok. This is a help file of Flash on how to set up a slider component: Adobe ActionScript 3.0 * use the Slider component

  Here's a tutorial on the display of the value set by a slider component: Code for food: the use of the Slider component: part 1

  For your third value display, the sum of the first two, you just need to add a line of code to the second slider to display the sum in a third textField.

  Who help me?

• You can reset a default theme to the default slide master?

  Hello

  I wanted to use a blade of default theme as a starting point to create a new custom theme.

  However, I accidentally saved the changes to the original theme in CP7 'white '.

  Is there any way I can reverse the changes and return to the original master slides by default?

  Thank you

  Denise

  Hello Denise,.

  Please go to C:\Users\Public\Documents\Adobe\eLearning Assets\Layouts\8_0\en_US there will be a file by the name of white.cptm, rename it to what it is.

  Then, go into C:\Program Files (x 86) \Adobe\Adobe Captivate 8 (32 bit) \Gallery\Layouts\8_0\en_US and copy white.cptm and then paste it to the location above

  Make sure you that Captivate should be closed during the operation.

  After gluing launch Captivate and you'll have, you have by default theme back.

  Concerning

  Himanshu

• Time display default slide does not apply

  Hiya-

  A demo of the software automatically saved to 3s by slide deck, and I would like to change the default view to 5s by blade.  When I change that in Edition/Preferences/Global/Defaults, it does not apply throughout the project.  No idea why?

  Thank you
  Kimberly

  What version, Kimberley?

  If it's CP5 or 5.5: it's in the properties, general Accordion Panel. You can select all the slides that must be changed and apply both to each other.

  

  Lilybiri

• Default for the parameter value date

  We use Oracle bi apps 7.9.5. In that when an organization dimension that we don't pass any value of loading
  setting $$ SRC_EFF_TO_DT. It is supported as on 01/01/1753. When the default value of 01/01/1753 is set?
  
  Is there a way we can define the parameter value globally for all dimensions in Informatica or DAC?

  01/01/1753 is Informatica's default date value. It uses this value when the parameter is passed to the parameter file and no default is mentioned in Informatica. To set the default value in Informatica, you may need to change all the mappings of one by one.

  Easy by default is to set this parameter to DAC - Design-> tab settings of the Source System. This will last for all workflows walked through the DCA during execution.

  Ash

• If the default as invited "All values" in a Variable of presentation

  Hello Experts,
  is it possible to set the default value for filtering on a Variable presentation for all the choices? Because when you select all the choices, I get no results.
  
  Thank you
  Concerning

  Detection of all choice of dashboard invites you into the answers
  http://108obiee.blogspot.com/2009/04/detecting-all-choices-from-dashboard.html

  See the link above, it also describes how to make a filter to display all values when you use the variable to the presentation and all the choices.

  Concerning
  Goran
  http://108obiee.blogspot.com

• Hidden and protected by default point unregistered static value?

  Hello
  
  a form of DML, I have a hidden and protected from the text field component. I have these settings:
  
  Source:
  Still, replacing value that exists in session state
  Static assignment (the value corresponds to the attribute of the source)
  By session
  PARTY_SC (Source value or expression): this is the column name
  After calculation of calculation (Nothing)
  
  By default:
  Default value: 'FOR '.
  By default the value Type: static text with Substitutions of Session State
  
  What I'm trying to achieve is to set the value of this field (element) before I / U in the database. However, this does not wotk as the Session value of the item remains NULL and whan pressing record button of database of course she rejects with msg: ORA-01400: cannot insert NULL into «WEBPOS» «PARTS '.» "" PARTY_SC ". Cannot process the PARTIES of the table line. Back by demand. There is also a validation rule for the value null in the processing of the Page for this field.
  
  No idea why and how solve it?
  
  TIA

  Helllo

  If you use the automatic treatment of the line (DML) to insert into the table and then Type 'Source' for the page element corresponding to "PARTY_SC" should be "Database column".

  CITY

• What are the optimal values for mac and arp timeout values

  Hi guys.

  What are the best values for 'mac address-table-time of ageing' and "arp timeout" by following scenarios? :

  -single sg300-10 as hosts Layer 3 - with a maximum of 10 local switch (directly connected)

  - and a 3750 x-stack with 100 local hosts + hsrp with a battery of the same kind

  or for asa 5520 as internet gateway for 500 customers?

  I use now a time of aging mac 300 seconds and a time-out of the arp of 3600 seconds.

  Is - this okay.?

  Thank you.

  These values should be fine. I don't know why the switch is layer 3 since you have of the 3750 and the ASA5520. If you start to see overflow errors, you should consider using the layer 2 switch.

  -Tom
  Please mark replied messages useful

• Cancel/model of default slide

  Hello

  I have created a caption box in one of my slides and accidentally selected, apply to all > slides? Apply to all slides. Now I have that same box of legend (apparently) incorporated in each subsequent slide of the project. I can't move, delete or even highlight the area, because it seems to be a background image.

  
  I tried to change the background image for the slide service, but this removes the images that are already there.

  When I try to insert a blank slide, it inserts a slide with this same box integrated in it. The box does not appear in the film strip, only in the editing pane.

  Anyone know how I can cancel the change I made?

  Hello

  I'm glad that my intuition was good

  For the sake of other readers: it is possible to mark your question as a reply?

  Lilybiri