my hp all-in-one is connected, updated and don't print anything from my computer

Similar Questions

• Kodak esp7 all in one, error paper jam and will not print

  Original title - the printer printing

  Kodak esp7 all-in-one, says error paper jam but there is no habit of printing jam

  Hi Barry,.

  I suggest you to follow the instructions provided in the article below and check if it helps.

  I suggest you follow the instructions in the manual.

  http://resources.kodak.com/support/PDF/en/manuals/urg00976/ESP7_UG_GLB_en.PDF

  Note: See page 72. Also, follow the instructions provided in the article below.

  Crooked prints and paper jams

  http://support.en.kodak.com/app/answers/detail/A_ID/1737/kW/Kodak%20ESP%209%20and%20paper%20jam/selected/true

  See also section below.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab4&V3H=winvistatab1&v4h=winxptab1

  I also suggest you to contact Kodak support in this regard.

  http://support.en.kodak.com/app/home/selected/true

  Hope that this helps, if you have any additional questions, feel free to post. We will be happy to help you.

• I replaced my Photosmart 2570 all-in-One with Photosmart 5520. I can print all programs except

  I replaced my Photosmart 2570 all-in-One with Photosmart 5520. I can print to all programs except the HP Image Zone. It shows the right default printer. When I print a photo 4 x 6 prints only part, and it is slightly enlarged. My operating system is Windows XP. Do you need any other information? Thank you. Peggy

  Hi PeggyOlson,

  It is an older program used with your 2570. Try to download and install the new photo software from the link below.

  HP Photo Creations

  HP Photo creation FAQ

• HP Officejet 6310 All in One – "cartridge error - remove and re-insert cartridge on the left.

  HP Officejet 6310 All in One "cartridge error - remove and reinsert cartridge on the left."

  Help!  With this error message, it is not allowing me to print at all.  I did the steps to clean the cartridge and carriage of the printer inside, twice with no result.  I turned off and unplugged the printer several times also. In addition, the cartridge that I just put is new.  Frustrated.  Thanks for any help you can send my way!

  Hello

  Looks like you did the correct steps to try to resolve the problem. If you did all the steps on the below link without resolving the issue, the hardware may be damaged.

  http://support.HP.com/us-en/document/c00831987

  After checking all steps have been completed, please call HP at 1-800-474-6836 for see what upgrade options are available for this model.

• OfficeJet 6600: HP Officejet prints 6600 pages of test, but USB connected or wireless - does not print anything

  Hello
  For some reason any my printer has ceased to be able to print anything at all, since last night at 7-8 so far, I've been able to print perfectly well.

  It is connected wireless (and on the home network and the IP address), but whether or not it is wireless (USB) - nothing will be printed at all.

  Have tried everything imaginable... uninstalled and reinstalled all HP 3 or 4 times now, various attempted fixes via the online help, nothing works. Have unplugged router printer 30 s, unplugged 30s, you name it.

  It allows to print in-house, however, no problem. Print a test - perfectly fine page, print a network test page - perfectly well. Clear print heads... everything comes out clear.

  Spotted an error prompt "spooler subsystem app not working not"... so found this page online (https://social.technet.microsoft.com/Forums/windows/en-US/460f297a-dd66-4476-a176-542e1519ca3e/fixed... and thought it was the miracle solution - nope, still doesn't.)

  Followed the steps detailed here: http://h30434.www3.hp.com/t5/Inkjet-Printing/HP-6600-won-t-print-wirelessly/td-p/4649292 - the link to the HP Print & Scan Dominican Republic by the way, is a dead link now... but I have tracked down the appropriate page and run the software. After following it exactly as I had to... I get this result:

  "There is a problem with your software which can not be repaired by this tool. Remove the software by clicking 'uninstall '. Reinstall the software with the product CD or by downloading the latest features full software from HP Customer Care. "- so in other words... I am told to do exactly what I've already done 3 or 4 times.

  It's driving me crazy... and do not understand why it will not print.

  I hope someone here can help... because it's completely maddening.

  Hello
  By coincidence, my grandson has me bought a new computer earlier in the month. and it arrived yesterday afternoon, a Lenovo all-in-One ThinkCentre w/Windows 7 - and after it he installed there, the printer printed fine from the computer.

  But, just in case it is needed, and because the advice was here, I thought I'd try the options.

  Unfortunately, I can't do a level 3 uninstall with the two methods provided. Method never showed a "util" folder or 'utility', both had a "utils" folder, and no method showed a record of "ccc". Also, by downloading the software, then go into the temporary folder through the search from the Start Menu, 3 sets of disc records came - and such that mentioned, none had the util/utility folder (all "utils" still had once) - and yet, none of them had a folder 'ccc '.

  My grandson theory was that something is likely messed up in the registry, and he doesn't dare touch it without knowing what it does - than a reformat or something registry editting and knowing exactly what they're doig - would be the best choice, but rather of your time and... almost useless with the new computer capable of printing. A friend IT very well educated friends, also backed up his theory...

  So, I have to wonder... don't you think it's worth, the Dungeon of combat with the old Gateway/Vista PC, or simply move to the new Lenovo/Windows 7 and cause less stress for us all? Haha!

  Thank you for trying to help but... it's too bad the computer unfortunately does not cooperate.

• Update to win 8 identifies the updates but does not download anything from 0 KB

  ASUS va550ca out of the box

  Lists updates and does not download anything 0 kb

  Back of bar activity scroll on the screen

  Hi Mark,

  What is the exact error message you received?

  Try these and check.

  Run the System File Checker tool, install the update to Windows and check.

  Use the System File Checker tool to repair missing or corrupted system files.

  http://support.Microsoft.com/kb/929833/en-us

  If the problem persists, run the DISM tool and check.

  http://TechNet.Microsoft.com/en-us/library/hh824869.aspx

• Have HP Photosmart b110 all in one series connected to my pc wireless, but it will not be printed

  Hi I have a series of all-in-one hp photosmart b110 it is connected to my wireless pc but it wont print I tried for days now, please can anyone help thanks

  Hi pauloldfield

  1. do you have the updated drivers installed for the printer?
  2. do you receive error messages when you try to print?
  3. What is the exact model of the printer number?

   

  You can check the links below and check out them if the steps to help you resolve the issue-

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows?T1=tab04

  
  You can also check the below link to get the latest drivers for the printer according to the model and verification number.

  http://WWW8.HP.com/th/en/support-drivers.html

   

  I hope this helps.

• 8625 all-in-One: 10 Windows updates for null printer and fax for settles not 8620

  We have four machines Windows 10 using our 8625 all-in-in-one on the network.  Only used the installation CD.  The machine stops of if a 8620 update for printer Null and Null fax microsoft who do not always with 0x802200b and 0 x 80070790 respectively.  Otherwise, everything works normally.  These updates can be removed somehow?

  Welcome to the HP community @rball007,

  I understand a computer running Windows 10, which had the printer installed using a Setup disk, now knows the pop ups. My best advice would be to uninstall the printer completely from a PC, the HP printer install wizard for Windows instead, to ensure that the most current drivers for Windows 10 are installed.

  Good luck

• Pavilion all-in-one: win 10 update, back on the window updates.

  We have a home Prem window 7 all-in-one and don't want windows 10 We have hidden updates that relate to the installation of win 10.  All of a sudden the window 10 logo appears on the Update window and wants to be installed.  It will install let us further updates now.  This 10 victory is a real virus and must be killed.  What can we do now to get off the logo and get updates for win 7.

  We received our answer forum microsoft.  There is a tool out there just for that.  It worked.  It is ultimate Outsider.  It worked and is an excellent tool.  I hope this helps someone else.  Thanks Joyce1937

• HP ENVY 23-o014 all-in-One: can I update my card on a PC before generation?

  It is a question more than a proplem...

  Last year, I bought my new PC before generation, all-in-one 23-o014 HP ENVY. Now, I want to update my card on the pre-built... I want the best video card and a better CPU (i7) and maybe more RAM.

  Is it possible to do?
  Can I buy parts and if necessary to hire someone to install it.

  Thank you.<>

  Hello

  You should be able to improve the memory and the processor but not the video.  Review the specifications.

• all-in-one 19 connection

  HP All in One 19 does not accept the password on login. I reset the computer twice. It keeps rejecting the password. Have also a telephone captioned (for hearing impaired) connected to the internet. Could be the problem? The phone works fine.

  Hello @rendd,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your HP All in One 19 desktop PC does not accept your password and you have reset it twice and still no go. I doubt that your phone would affect the ability of computers to connect unless it's the computer on the internet. I suggest that you unplug your phone, powercycle your router (unplug it wait 30 seconds plug it back) after that the router comes back to the top of powercycle your computer (restart). Check if you can connect, if you can plug in your phone and see if the problem occurs again.

  If you sign in before you connected the phone and then couldn't I suggest that contact the company that provides the phone to find out why it is kick the computer on the network. If however, you were not able to connect after the powercycle I suggest that you review the document isunshare: 8.1 Windows password reset when you forgot It, that will guide you in how to reset your password correctly.

  Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a great day!

• HP J6480 All in One - Scan connection problem

  Cannot connect the component analysis to my HP Envy - Windows 8.1. I have never been able to connect to this total scanning printer to work with my laptop either. The message: no Scan option - refer to device documentation to troubleshoot. The printer comes with separate instructions for printing, fax, but no information of scan.

  Hello Shananaruns,

  Welcome to the HP Forums.

  I see that you have a problem with scanning.

  It seems to me that it would be possible that not all software has been installed.  One step, you can try is to run the HP print and Scan Doctor.

  If this does not resolve the problem, I suggest when we uninstall the software and drivers, then resinstall by clicking on the following link for HP Officejet full feature and driver software.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thank you for your time.

• OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

  We had the printer since 12 months, workin with no problems.

  Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

  The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

  -The display panel shows "wireless invalid password (WPA) is entered.

  -The results of network printer test page indicates a FAILURE on safety.

  I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

  Anything else I can try?

  Find a new update of the firmware for the printer (May 9, 2016).

  After you apply the update, the printer is able to connect to the new modem.

• Lexmark printer s605 all-in-one cannot connect with my computer toshiba laptop with windows 7

  Message printer cannot communicate with the computer.  How can I fix?  Unable to print my lexmark all in one single s605 printer off computer toshiba laptop to windows 7.

  Message printer cannot communicate with the computer.  How can I fix?  Unable to print my lexmark all in one single s605 printer off computer toshiba laptop to windows 7.

  Have you installed the correct drivers for Lexmark?

  Can watch it here where others have observed the you free download , that you need.
  (I assumed Windows 7 64-bit in both cases).

• Help with driver? C6380 printer all-in-one cannot connect to laptop

  I can't connect my laptop with my printer or wireless (who worked til 2 days ago) or by USB cable (which just tells me that there is an error if I try)

  I tried to reinstall, and even if the printer (C6380) is certainly connected to my network (wireless) it will still not appear on any attempt to install with my laptop or my desktop.

  Can someone tell me what to do to the RECF = Daniel this?

  The disc that came with the printer now says he has what it takes (I'm on a newer operating system now) and the HP Reinstall Driver / utility etc. brings it either.

  Do I need a new printer or is there a simple solution?

  Thank you in advance!

  As I said, BT routers are very problematic.  If you want that this problem just go away, get another router and connect all your devices.

  Beyond that, BT contact may be the next best step, sorry.