Cancel the don "t like me once again" in Windows Media Player 11 for Vista 64
I was playing. MOV in WMP files without any problem except for a small pop up window telling me something on a required codec. In the hypothesis where clicking on yes I make the default setting I clicked on "don't ask me again." Unfortunately I can play now is my. MOV files. I've looked everywhere for a solution to this question and the only things that keep coming are a change in default programs to run the file and an update of the codec. My WMP is updated automatically every week or two and. MOV files are already set to open with WMP by default. What I need, is for this small window option to open once again, when I try to play the. MOV files. How to undo this selection "do not ask me again"?
Clear the default checkbox for WMP. MOV and then try to open. MOV with WMP
As you say that you were able to open. MOV, you do not have the codec
However the popup says that you need the codec
It is quite possible that the codec you have is not 100% compatible
If you are still experiencing difficulties opening. MOV install the free codec pack from the link below
This is the best pack codc available
http://www.free-codecs.com/download/Vista_Codec_Package.htm
First page, click "Download Vista Codec Package.
Second page, download Vista Codec Pack 6.3 is listed four times
The first is a 32 x .zip file
Secondly, one is a x 32 .exe file
Third X 64 .zip
Fourth x 64 .exe cannot be available now
Tags: Windows
Similar Questions
-
I had all sorts of difficulties to install Windows Media Player 11 for Vista Version 6.0 system. Can someone direct me as to how to install Windows Media Player 11 on my version of Vista?
Thank you
SWright20
Windows Media Player is not installed correctly and must be reinstalled
Restart your computer.
Start > Search box, type cmd > u glance, upper-left, right click oncmd.exe > press Run As Administrator > at the flashing pronpt, type unregmp2.exe /UpdateWMPVersion > press the Enter key
Note: to avoid strike fault and bad spacing, it is best to copy and paste the command line above instead of typing.For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
This has only started recently. Also the same thing is happening now with my Skype video.
Hi norightbrainleft,
1. you remember to make changes to the computer, after which the issue started?
I suggest updating the graphics card driver and check if it helps:
Updated a hardware driver that is not working properly
Also, take a look at the following links in the article:
Get the best display on your monitor
Adjust the brightness and contrast of your monitor
I hope this helps.
-
I need windows media player 11 for xp professional 32-bit only see the load down to 64-bit
I need windows media player 11 for xp professional 32-bit only see the load down to 64-bit
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1d224714-e238-4E45-8668-5166114010ca#SystemRequirements
-
I get a message "the parameter is incorrect" whwn I try a Windows Media Player security upgrade. What should I do?
Hello1 have. what security update you tried?
2. in addition, what version of Windows Media Player you have?Try these steps and check.
a. Click Start and type cmd in run and press ENTER.
b. in the type guest following command press ENTER.
WMP.dll regsvr32.exe.
c. close the command prompt and start Windows Media Player and check.I hope this helps.
-
Problem with the display of a video frame in Windows Media Player 11 on Vista
Hello
I am having some problems with the Windows Media Player 11 on Vista. On my XP machine, when I discovered a video frame by frame, it works perfectly back and forth. However when I try to play the same video on my Vista machine, the button to the front of the image works perfectly fine but the previous image button takes video from 5 to 10 frames. Since I use my machine Vista more and need this feature often enough, it gets boring very quickly. It is a drive problem (since the same player works great under XP with the same video) and can be solved with a patch or some sort?
Thank you
Hello Helloaamir,
Thank you for posting. I understand the problem you are having, but I do not understand why in the need for these features. Depending on what you're trying to do, may be able to use Movie Maker instead of it you also has characteristics of the image by image. If you could include that you are using this feature, because I can give you a good alternative or possible difficulty of deliverance.
Looking forward to help you any further. Zack
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think. -
original title: program music keyboard key
How can I change the music button on my keyboard to launch Windows Media Player to launch WinAmp?
Thank you
Drew
As Mike Hall suggested, first look for the keyboard utility and seek to change the keyboard assignment there.
If this option is not available, you can try to change the default program to open files of music. I do not think that "hotkey" keyboard music trying to specifically open Windows Media Play, rather it opens the program assigned as the default value for the music.
So you'll need to get to the default programs control panel applet. To get there:
- Click Start , then Control Panel (in midway up on the right side)
- In the Control Panel window, click programs (not options, just the word more big programs). (If you have your set control panel to displayall items in the Panel control, then the applet default programs will be already visible and available directly)
- The second group of options should be the default programs. The two options here that should be of interest to you are:
Make a file always open in a specific program type and (especially) set your default programs.
You should find everything you need there.
- If this proposal of solution solves your problem, please go back and mark as answer for others to consider.
-
I can't the classic fm radio station to stream through windows media player.
I can't the classic fm radio station to stream through windows media player.
I can't the classic fm radio station to stream through windows media player.
Try this: -.
-
Downloaded the album doesn't play no not on Windows Media Player
I recently bought a movie that included the soundtrack download. I downloaded the soundtrack the same day that I ripped several other CD on my computer. I encountered a problem where for some reason, everything was put in my document rather than windows media player, which never happened to me before, so I transferred both downloaded album all CDs ripped on a playlist on windows media player. When I was unable to get transferred to my library, I gave up for the day and thought a few days to think about that I could understand it. I came home last night and all the albums themselves had moved into my library, with the exception of the downloaded album, and when I clicked it, a message comes up saying windows media could not find the file and that if I tried to burn, rip, or sync and the album that represents the position in my library, can point to an album that has been moved renamed, or deleted. I went to move my documents once again, but he was no longer there and the only place where I can find it is in the playlist, where it does not. I tried redownloading it, but it's a download time. I ran the windows media control and he says he has a corrupted file but don't tell me what to do to this topic or even what the corrupted file was for sure, but I guess it was the downloaded item. If anyone has ideas of how to do to solve this problem it would be greatly appreciated
Unfortunately, it was a Web site that has been created strictly for downloads, and when I click on the download that put it directly in the folder my documents, where I had to then transfer to my playlist, so I think he just didn't upload properly
-
Problem with the playback of an audio .asx file in Windows Media Player.
Hello
I'm not able to play an audio .asx file in Windows Media Player on the Windows Vista-based computer.
I get the following in a pop-up error message:
Windows Media Player cannot play the file because the specified protocol is not supported. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:" or "rtsp:").
Help, please.
My email address is * address email is removed from the privacy *
Thank you.
-HimAlandi
Hello
1. facing this problem with the .asx format?
2. you remember to make changes to the system?
3. where is the file?Error message: "Windows Media Player cannot play the file because the specified protocol is not supported. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:" or "rtsp:"). »Windows Media Player cannot play the file because the specified protocol is not supported by the player or not supported by the server.If you encountered this error by clicking a link on a Web page, the link isn't valid.If you encountered this error by typing a URL in the open URL dialog, try opening the file using a different transport protocol (for example, "http:" or "rtsp:").The following is a list of protocols supported by the player and the correct URL syntax examples:
(a) MMS://serveur/nom_fichier (for example, a file with a .wma, .wmv, .asf, or .mp3 extension)
(b) http://server/filename
(c) rtsp://server/filename
(d) mms://server/sami.asf? SAMI = http://server/sami/sami_demo.smi (SAMI file)If the Player supports the protocol you used in the URL and you can't always read the content, check that the drive is configured to use all of its supported protocols.To configure the protocol settings
(a) in the Player Windows Media, on the Tools menu, click Options.
(b) in the Options dialog box, on the tab of network in the Streaming protocols area, select all the checkboxes (Multicast, UDP, TCP, and HTTP) Protocol, so that a check mark appears in each.
(c) note that the supported protocols can be used only to distribute digital media files. Windows Media Player cannot be used as a browser.If the fixes above don't work, you can rename the folder of information network for the drive so that it can rebuild its information network files after restarting it.To rename the folder of information networking of player.
(a) close Windows Media Player. (To do this, on the file menu, click on exit).(b) to make the changes that you will be able to see the hidden files and folders
Show hidden files.
http://Windows.Microsoft.com/en-us/Windows-Vista/Show-hidden-files(c) click Start, and then click computer.
(d) open the disc drive Local (c :)), open to users.
(d) open your user account.
(e) open %APPDATA%\microsoft\windows\sendto and open Local.
(f) open Microsoft and open Windows Media.
(g) click on the file and rename it.
(h) if the file is name12.0, edit as file name as old 12.
(i) restart the computer and check -
The programs have been modified and open in Windows Media player
Programs of my laptop will not start because they have been modified to open with windows media player. What should I do?
Hello
This problem is limited to any program of specfic?
Method 1:
You can run the Fixit and.
When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program
http://support.Microsoft.com/kb/950505
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registryMethod 2:
A default program is the program used by Windows when you open a particular type of file, such as a music file, an image, or a Web page. For example, if you have more than one web browser installed on your computer, you can choose one of them to be the default browser.
This option allows to choose which programs you want Windows to use, by default.
If a program does not appear in the list, you can make the default program using set Associations.
1. open default programs by clicking the Start button, click default programs.
2. click on associate a type of file or Protocol with a program.
3. click on the file type or protocol that you want the program to act as the default value.
4. click on the program of change.
5. click on the program that you want to use by default for the selected file type, or click the arrow next to
Other programs to show other programs. (If you don't see your program, orother programs
is not listed,Click Browse to find the program that you want to use and then clickOpen
6. click on OK
For more details follow the link below:
Change the programs that Windows uses by default
http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
Hope this information helps.
-
Original title: what is a possible cause for any audio?
Whenever I try to play any type of audio file I get the error message "Windows media player has encountered a problem while playing the file." All of my audio is disabled, no notification sound, no in his game. All audio drivers are up to date and when I try to diagnose the problem, he told me that there is no problems found. It also gives me this error message when you try to play video files or listen to internet radio on the media player.
Hello
If I understand correctly, you are facing problem with playback of the audio files in Windows Media Player. I would like to know more information on the issue, so that we can help you better.
1. have you made changes on the computer before this problem?
2. is it works much earlier?
Let us try the following methods and check if it works for you.
Method 1:
Run the troubleshooter in Windows Media Player.
Open the troubleshooting Windows Media Player settings Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
Method 2:
Try to re - register the files associated with Windows Media Player.
a. Click Start, type 'regsvr32 wmp.dll"without the quotes into the search option and press ENTER.
b. restart your computer later.
Also see the following Microsoft to issue his No. article.
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
Please reply with the status of the issue, so that we can better help you.
-
Why the vob file has not been opened by windows media player. ?
Hello
I have a DVD of the Hindu film. When I try directly to open to watch this film of media windows Player, but does not work. It opens only player form of de Niro and VLC Media. Please give me some advice on this, that is why the opening of Windows media player. ? Thank you
Krishna
I am confused to tell you that you can not read a DVD, or are you
saying that you want to change the default program that plays?The following items may be worth a visit:
How to change the auto run settings
http://www.ehow.com/how_5220936_change-AutoPlay-settings.htmlHow to change CD/DVD content of actions to AutoPlay in Windows XP
http://www.winbookcorp.com/_technote/WBTA20000846.htm -
Problem update the eponymic information from a mixed CD using Windows Media Player.
(Last?) version of media player, the I installed (11.0.5721.5280) does not seem to have the same functionality as the previous version I was using (10.00.00.4081) when it comes during the extraction of information albumn and song from the internet for a mixed CD. I mean a mixed CD a CD I burned a number of other CD. I want back the song, albumn, information etc. for each track, but Media Player changes the information for all of the CD. One response to this problem for about a year ago suggested highlighting the track (s) and right click for information albumn, how you were presented with an option, one of them being that the tracks came different albumns. It worked in the old version of Media Player, but I can't make it work in the new version. Should I have a wrong setting option? Can you explain how to accomplish what I'm trying to do with the latest version of Media Player? I'm actually running Windows XP if that makes a difference.
Hello
You can add information about the media for the items in the media library using different methods.
Refer to this article for help:
http://Windows.Microsoft.com/pt-PT/Windows-XP/help/Windows-Media-Player/11/album-infoMedia Player automatically updated media information, but you can prevent the media information to be overwritten by following these steps:
a. click the arrow below the library tab, and then click Other Options.b. updates toAutomatic media information for the files area, verify that theAdd missing informationoption is selected. (It is selected by default).
This will prevent the player to accidentally overwrite the information in appropriate media that you have added with the incorrect media information that might be available
in the database online.Note that the Add missing information option will not prevent the player to overwrite your changes if you use the Find Album information command
to manually download the media information from the online database.Kind regards
Afzal Taher - Microsoft technical support.
Visit our Microsoft answers Feedback Forum and tell us what you think. -
Hello
I can't share my media using WMP 11. When I try to do, opens a window of options asking how I want to share media files (with xbox, other users, etc.), and I select the options and click OK. Then, when I return in the sharing of multimedia files to see if the media are indeed shared, a window opens informing me "Media sharing has been disabled because a required Windows setting or component has been changed. For any additional help, click Help on the Web. When I click Web help, the error code above, with a few troubshooting not. You must ensure that Windows Media Player Network Sharing Service is turned on. However, when I get to the list of Services, WMP Network Sharing is not. It is also a step to confirm the ownership of a registry subkey. When I try to access the subkey HKEY_LOCAL_MACHINE\Software\Microsoft\MediaPlayer\Preferences\HME\ [security ID], however, there is no security ID subkey. Instead of that, by virtue of the MCH, there is a list of "default (name), REG_SZ (type) and not the value (data)".Suggestions about how to fix this would be greatly appreciated. Would it be useful to simply uninstall WMP and start over? If so, how to do that? I saw an obvious way to do it.
Thanks a lot for your suggestions.
Bill Cowan
Hi Bill Cowan,.
Thank you for using Microsoft answers.
Follow the instructions in the link below that may help you resolve the issue.
Method 1:
Windows Media Player Error Message help
Method 2:
Let us try to disable antivirus and check whether the problem is resolved.
Reactivate the antivirus after checking the issue.
Let us try to disable the third-party firewall and see if the problem is resolved.
Re-enable the firewall after checking the issue.Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
Maybe you are looking for
-
Re: Satellite M305D-S4830 Volume dial strange behavior
Hello, I have a strange problem with my volume on the Satellite M305D-S4830 control button. I don't know if this error began to occur, but now my volume control button produces the letters B and C when I ride it's right/left. Here, I'll roll c/cw-cw
-
Hello I lost audio on my laptop, DV7 Entertainment Notebook 2014TX. Not sure if it was because of an update... I followed the advice of HP, deleted the codec and tried to reinstall it, but it will not install correctly. It says reinstall drivers but
-
I just bought a macbook pro 13 ", however it has no ethernet port, have I need to buy a device of air port and what one do need me?
-
Can someone advise please? I copy all my photos from SD card in my iPad and the use of the Photoshop Express application to modify. iPad is set to optimize the storage of photos from device. Edit app Photoshop Express small size kept on the device,
-
I have to keep downloaded adobe flash player over and over whenever I want to use. Why is that happening and how can I solve this problem?