Cancel the HTTP request

What is the best way to cancel a HTTP request that seems too long?

I use asyncToken to capture the XML response and don't want it to be process (fill) if the user cancels the request and move to something else.

You can call cancel() on the HTTPService to cancel the last query.

What is the deal?

Ben Edwards

Tags: Flex

Similar Questions

  • It is impossible to download software Acrobat pro dc because the "failure of the http request. What can I do?

    It is impossible to download software Acrobat pro dc because the "failure of the http request. What can I do?

    Download & install instructions https://forums.adobe.com/thread/2003339 can help

    -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

    -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

    -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

    -you will need to enter your original serial number during the installation for non-Cloud programs

    - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

    Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  • How do to cancel/return HTTP request (because of slow SQL queries)

    Hi everyone - I have a flex application that requires a connection first. The connection queries my database to check if it's a name of user and password valid. 95% of the time the query to check if it's a name of user and password valid takes almost no time (less than one second) and the user connects very, very quickly. But on occasion, for some reason, the query takes a long time or something where the valid/invalid result is not returned for about 20 to 40 seconds. If I hit the button submit once again, it will return the SQL query and very quickly (in general) work very well. It is a simple query to find the name of user and password, so I think that something is maybe going on why it it takes so long.

    Two questions:

    1. no idea why this could happen that some of the time, and most of the time it works fine? Any suggestions or fix for this?

    2. an idea to solve this problem I came up with, I could just cancel and resend the request. Anyone know how I can cancel and return the most recent httprequest object? Should I have it checked to see if I do a query, and the result is not returned within 2 seconds, then cancel the current request and return? This does not solve the real problem, but it provide a workaround. If I was a user of connect, and a login page lasted 30 seconds, 5% of the time I connect, I get bored and leave or think that it does not work.

    Note: I may queries on the site, what happens the same question, but the connection of the user request is the most visible and the most important. I would like to find a solution to avoid other problems too.

    Help, please! Thank you!!

    As a side note, if you want to see the site/application I'm talking, it's www.yahtzo.com

    The site is fully functional, just try to fix some bugs. If you have the time, play some games!

    Thank you!

    HTTPServcie has a requestTimeout property, I don't remember exactly if there is a default value. Together, a custom value and if you get an answer for this amount of time the HTTPService will trigger the ResultEvent. Inspect the event you could get some extra info to know that there was a timeout.

    C

  • I need assistance with the HTTP request procedure

    This is the message I get debug, attempting a HTTPService request as follows
    < mx:Application... initialize = "myService.send ()" >
    Import mx.rpc.events.ResultEvent;
    < mx:HHTPService id = "myService" url = "" data / myInfo.xml "result =" resultHandler (event) "/ >:"

    [SWF] C:\Documents and Settings\ArchiMaster\My Documents\Flex Projects\krsl_corp\bin-debug\krsl_corp.swf - 786 719 bytes after decompression
    [Fault faultString = "HTTP request error" RPC faultCode = "Server.Error.Request" faultDetail ="error: [IOErrorEvent type ="ioError"bubbles = false cancelable = false eventPhase = 2 text =" Error #2032: stream error. "]] ["URL: file:///C:/Documents%20and%20Settings/ArchiMaster/My%20Documents/Flex%20Projects/krsl_cor p/bin-debug/data/ilungas.xml"]. ["URL: data / ilungas.xml"]
    to mx.rpc::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal:faultHandler () [E:\dev\3.0.x\frameworks\project s\rpc\src\mx\rpc\AbstractInvoker.as:216 ]
    at mx.rpc::Responder/fault() [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\Responder.as:49]
    at mx.rpc::AsyncRequest/fault() [E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\AsyncRequest .as:103]
    to DirectHTTPMessageResponder / errorHandler ([E:\dev\3.0.x\frameworks\projects\rpc\src\mx\mes saging\channels\DirectHTTPChannel.as:343])
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at flash.net::URLLoader/redirectEvent()

    What it means? In addition, I do not use the default workspace, so Flex created only the ".metadata' but not the 'configuration' file, that is why, I had to copy a block as the default workspace. So, how do you get Flex to create two files no matter the location of the workspace? I really need help. Thank you!

    Looks like the error message saying that "data / ilungas.xml ' was not found. You use url = "" data / myInfo.xml ' in your service. " They do not match.

  • Cancel the current request through agent webservice task

    Hi all

    I need to cancel the request being another service using the agent task web service.

    I used the cancelRequest of RequisitionService.wsdlmethod. It has been working well and the cancellation of pending applications. But if the task in the service plan has 'not to cancel once the task begins' it fails to cancel such a request, get the error 'request id xxxx has PONR status. You can't undo this'.

    I need to cancel pending applications which is to have the current task "do cancel not once the task begins' on the fly to another service using the agent task.

    Please suggest any approach to achieve this.

    Thank you

    Uday Shankar

    Hi Uday,

    What you see is a correct product behavior and expected. It is not possible to cancel these tasks using the API.

    You can cancel any requests to in "Situation PONR" using the services Manager user interface.

    Thank you

    Max.

  • Today, I have a problem with the HTTP request

    Well, this time, I try to get an image .png from a URL. To get this I do the following:

    try{   if (CoverageInfo.isOutOfCoverage()){      setError("No hay covertura suficiente de la red");        errorFlag = true; } else{     c = (HttpConnection)Connector.open(url);      is = c.openDataInputStream();     for(int j=0;j
    

    My problem is the second 'try' returns: "java.lang.illegalArgumentException". I don't really know much on HTTP conections, so I don't know that I have a lot of wrong code

    in other words, I'm moving to the java language this short code on the C++ language:

    WebRequest request = System.Net.WebRequest.Create(url);HttpWebResponse response = (HttpWebResponse)request.GetResponse();Stream datos = response.GetResponseStream();Imagen = new Bitmap(datos);pb1.Image = Imagen;datos.Close();response.Close();
    

    can someone help me?

    Thank you RexDoug and peter_strange,

    in the book "java J2ME a tope"-unfortunately or fortunately (for me), it is in Spanish - explain everything about HTTP request and how to interpret correctly the answer. Finally with the following code, I solved my problem:

    try{
        //ask if i have coverage
        if (CoverageInfo.isOutOfCoverage()){
            setError("No hay covertura suficiente de la red");
            errorFlag = true;
        }
        else{
            //create connection
            c = (HttpConnection)Connector.open(url);
            c.setRequestMethod(HttpConnection.GET);
            is = c.openInputStream();
    
            //process response
            if(c.getResponseCode()==HttpConnection.HTTP_OK){
                size = (int)c.getLength();
                if(size != -1){
                    data = new byte[size];
                    is.read(data, 0, data.length);
                    imagen = Bitmap.createBitmapFromBytes(data, 0, -1, 1);
                }
                else{
                    ByteArrayOutputStream byteArray = new ByteArrayOutputStream();
                    int stream;
                    while((stream=is.read())!=-1){
                        byteArray.write(stream);
                    }
                    data = new byte[byteArray.size()];
                    data = byteArray.toByteArray();
                    byteArray.close();
                    imagen = Bitmap.createBitmapFromBytes(data, 0, -1, 1);
                }
            }
            //close connections
            c.close();
            is.close();
        }
    }
    

    This code is similar to the example of rexdoug.

  • Capture the HTTP request parameters

    Hi people,

    I am completely new to Foglight. Please bear with me. My question: is it possible to use Foglight to capture the query parameters in a HTTP container?

    We have a situation in production where some clients send content-type: application/x-www-formulaires-urlencoded where the body is xml. so, normally, they should send text/xml. Now, this wasn't a problem until recently, something happened on the side server. Whenever the content type has the above, an external code to our application would attempt to recover the query parameters before our application is called. It would be nice if the content was x-www-form. But it's not. So when this external code request parameters, the input stream is read, see and discarded because it cannot be parsed in the query parameters. Applications for the user then failed at the application level as ELE entered WHAT XML has not been received.

    The question came three days ago and disappeared yesterday. So, to rephrase my question: is it possible that some unexperience Foglight user could be the cause Foghlight try to fecth query parameters to detect the type of content?

    Thank you very much.

    Maxbridge.

    What agents run on that server and your environment?

    The options for the capture of the http parameters are usually:

    1 FxM (Foglight experience Monitor) is a passive listener (sniffer web) who gets his information of span port or network tap fxm Gets a copy of the traffic and does not affect the flow of the HTTP (web traffic does NOT pass through the device). Since FxM does it all the time and does not receive a copy of the traffic it does not fit the behavior.

    2. a Java agent has the ability to collect traces if someone is activate the mechanism of tracing with the box that says specifically the Java agent to collect the http settings. What is happening inside the Java Server, so I'm not sure it fits the behavior you MENTION. Keep also in mind that Java agent do NOT trace all requests, it is activate followed maually or by a rule and do on a limited number of request for a limited time.

    It should very easy to test this use cases, to go on your test server, start tracing with http settings and see if there is impact, if impact open cases emergency assistance (sev 1) so dev may fix this problem. I have not seen this behavior in one installation within 3 to 4 years since we added the collection of http parameters, so if this is the case we want to dev top as soon as possible. If that's the reason workaround until dev is trace without http parameters.

    3. agent of .NET collection of parameters for queries that are taking over X seconds. I doubt that is the case, as the .NET agent does it all the time, he would not stop doing (and in your case, it seemed like the behavior stopped).

    Golan

  • The HTTP request failed

    Tricks to work around the error message "HTTP Request Failed" when you download Acrobat Pro on a PC running Windows 7?

    clear your adobe.com cookies or use a different browser.

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • OSX Apache Server: how to redirect the http request?

    Hi all

    I have a Mini Mac OSX Server El Capitan running. It already serves some sites. Normal Server Web sites:

    -site1.example.com

    -site2.example.com

    Now, I have installed an application that has its own built-in web server. This application would be normally accessible via http on port 80. However, http on port 80 connections are automatically considered trapped by integrated apache of the OSX Server. Therefore, I now put the web application to run in a different port to apache. I also setup a subdomain, so that users can access this application directly, but they also have to type in the port in the URL - for example, the new web app site is reachable at the:

    -myapp.example.com:7117

    What I would do, is for users to simply access the application using:

    -monappli.exemple.com

    I know that there is a way for us to have apache to "Reroute" all requests for a specific to an internal port subdomain automatically, but I don't even know where to start. What are the files we need to configure on OSX Server? How configure us them?

    Any guidance would be greatly appreciated.

    I had the same requirement and has resolved the way you want to as described below.

    1. Define the additional app to run on another port
    2. Create a site in.app using port 80 and the same host name you want to use for the additional application
    3. Set up a redirection for this site in.app as follows
    4. Source = /, Destination = http://hostname.domain.com:1234 /, Status = Permanent (301)

    Of course, use the correct host name, the domain and port for your situation.

    PS. the same approach I have described above also can be used to redirect the corresponding https port 80 or 443 site.

  • GET THE HTTP REQUEST PARAMETERS

    Hello

    How can I send three parameters through GET on my server, I need to send three sttrings generated in my application on the server.

    I've tried with network application of Pentecost without success, demand will, but parameters never arrive

    QNetworkAccessManager * Manager = new QNetworkAccessManager (this);
    Application of QNetworkRequest (QUrl ("http://server.php"));
    request.setRawHeader ("to", "email");
    request.setRawHeader ("title", "hello");
    request.setRawHeader ("msg", "text messages");

    Manager-> get (request);

    Thank you

    You could add the strings as GET parameters to the URL:

    QUrl ("http://server.php?to=email&title=hello&msg=text+msg");

    But I think you should PUT these fields to the server because the URL has a maximum length:

    QByteArray data;

    Data.Append ("[email protected] &"); ")

    Data.Append ("title = Hello World &"); ")

    Data.Append ("msg = Hello World! Are you okay? ») ;

    Manager-> post (request, data);

    I have it wrapped in a method that takes QMap as parameter and returns QByteArray, because it's quite annoying to keep in mind to add '&' between each pair of key / value.

  • [U8.1] how to host OWIN katana Windows store App or how to intercept the http request in windows store app

    Hello

    I have an application that needs its own server to check if the query to this server can be served on-site or even reach the server online for the same thing.

    In fact, my application will have some local files that will be included in the package and part of the content will be responsible for the online server, so my requirement, it's that I want to somehow intercept the request of my application and redirect accordingly.

    You can tell I want to query interceptor or possess oneself by a webserver as OWIN katana inside my windows store app. Alternatively, is there a way to host web on IIS via app store windows application.

    Please let me know what is possible only in App Store Windows as my application should run on all devices for Windows Store Apps support.

    Thanks in advance.

    Hi Sissi,

    Thanks for posting your query in Microsoft Community Forum.

    According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

    TechNet Forum

    http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=W8

    Hope this information is useful.

  • The characters UTF-8 get corrupted in the HTTP request

    I use the following code to read the response HTTP of Mongo DB to Oracle table. Some parts of the source (of type json) is received in Chinese are corrupt. The line

    DBMS_OUTPUT.PUT_LINE(buf);
    

    displays these corrupted values.

    FUNCTION FN_READ_CONTACTS_MOB (p_id in number) RETURN NUMBER
    IS
    OracleBatchNumber number := p_id;
    buf NVARCHAR2(32767);
      l_param_list     VARCHAR2(512);
    
      l_http_request   UTL_HTTP.req;
      l_http_response  UTL_HTTP.resp;
    
      l_response_text CLOB;
      
    BEGIN
     DBMS_OUTPUT.ENABLE(1000000);
      -- service's input parameters
    UTL_HTTP.SET_WALLET('file:C:/app/', 'manager1');
      -- preparing Request...
      l_http_request := UTL_HTTP.begin_request('https://api.appery.io/rest/1/db/collections/Outlet_Details?where=%7B%22%24and%22%3A%5B%7B%22Oracle_Flag%22%3A+%22Y%22%7D%2C+%7B%22OracleBatchNo%22%3A+%22'||OracleBatchNumber||'%22%7D%5D%7D'
                                              , 'GET'
                                              , 'HTTP/1.1');
    
    
      -- ...set header's attributes
      UTL_HTTP.set_header(l_http_request, 'X-Appery-Database-Id', '53f2dac5e4b02cca64021dbe');
      --UTL_HTTP.set_header(l_http_request, 'Content-Length', LENGTH(l_param_list));
    
      -- ...set input parameters
     -- UTL_HTTP.write_text(l_http_request, l_param_list);
    
      -- get Response and obtain received value
      l_http_response := UTL_HTTP.get_response(l_http_request);
    
    --using a loop read teh response, as UTL_HTTP.read_text hat returns the result as a VARCHAR2 (max 32767) (you have an implicit conversion here).
        BEGIN
          LOOP
            UTL_HTTP.read_text(l_http_response, buf);
            DBMS_OUTPUT.PUT_LINE(buf);
            l_response_text := l_response_text || buf;
          END LOOP;
        EXCEPTION
        WHEN UTL_HTTP.end_of_body THEN
          NULL;
        END;
    
    
     .....
    

    When I run the following:

    select value from nls_database_parameters where parameter='NLS_CHARACTERSET';
    

    and he returned: AL32UTF8.

    does not mean that my DB is set to UTF - 8? or there are other things need to be checked for this pupose?

    It seems to me that the answer conatins no content-type header.

    Maybe the link below will clarify the issue:

    https://docs.Oracle.com/CD/B19306_01/AppDev.102/b14258/u_http.htm#i1027267

  • Can BBM sends the HTTP request to the server


    You can make your application HTTP connections.  The BBM API are not involved with it.  Guide to networking found here: https://bdsc.webapps.blackberry.com/java/documentation/ww_java_networking/Intro_networking_1984362_1...

  • Is it possible to make the http request with a part without the app?

    If this is the case, then could you give me a simple example to achieve with c ++?  I tried to write #include on top but he says

    ../src/service.cpp:20:33: fatal error: QNetworkAccessManager: No such file or directory
    

    When I create an instance of QNetworkRequest.

    Thank you very much!

    Looks like you need to include the appropriate library.
    try adding - lbbnetwork in the .pro

  • The HTTP request failed in installation

    I tried to install Adobe Pro DC twice with the same result.

    Help, please.

    Hi bonnieo1149021 ,

    Please let us know the version of the OS on your system?

    If its windows, please try to run this cleanup tool: Download Adobe Reader and Acrobat tool - Adobe Labs

    Restart the system and install Acrobat pro DC from this link: download and install Acrobat DC subscription

    Also, please try to clear the browser cookies and try again with another browser.

    Let us know if that helps.

    Concerning

    Sarojini

Maybe you are looking for

  • iOS 10 people record problem/question

    Hello I have a couple of "faces" in the issue of people who are coming in white, but acknowledged same 'face' of many times.  Is anyway to update it for photo comes actually?  At a few faces, I don't know that facial recognition found since it is com

  • Apple pencil - adapter charger replacement and F

    Just need a simple answer – where can I buy an adapter female-female lightning replacement to load my pencil of Apple.  I just got back from a business trip and may have left mine in a returned rental car along with a cable replacement... all I know

  • HP ENVY 17: Can I put my graphics

    I'm not very good with computer harware and know what are the components, but I was wondering if it was possible to upgrade all aspects of my pc to give me a little more FPS in the high end games able to manage my laptop on medium setting well enough

  • Best architecture for the implementation of the cRIO

    Hello I need to fix a relative to the cRIO application architecture. My current operation involves 1:flushing the elements of the FPGA to RT DMA FIFO when the number of items remaining in the FIFO is about 60 000 2: my second loop on the fact cRIO tr

  • Driver for PSC 2355 printer

    Hello I can't download the driver for the printer hp psc 2355 for windows 7. could you please help me solve this problem? Thank you very much in advance, Rosamond