cancel the mapping cmd

Similar Questions

• Cancel the MAPPING of Windows volumes?

  I don't know about scsi unmap command for vmfs recover space on a LUN EQ. Is there an equivalent for Windows data volumes connected via iscsi?

  Hello

  On Dell PS Series San, you must run EQL FW, 6.x or higher and the volume cannot be set up for EQL replication.  It is as well rep SYNC and async rep.

  Much depends on the version of Windows that you're talking about.  Windows 2008 R2 and do NOT naively support UNMAP.   It does support the SSD TRIM command.  However, if you install the printer Dell HIT / ME software he installs a driver to modify the order ADJUST order cancel the MAPPING on the fly to Dell PS volumes.   This applies to volumes that are DIRECTLY related to the EQL volume via the MS iSCSI host initiator.  A virtual machine on a VMFS partition is not supported by HIT / ME software.

  Windows 2K 8 and CSV de Hyper-V R2 volumes does not support UNMAP.  This is a MS issue, unrelated to the table.   Volumes Windows 2012 and R2 CSV can bear UNMAP only when you use virtual disks VHDX, if using the recovery of old VHD is not taken in charge.

  An additional advantage of HIT / ME in all cases taken in charge, is through the crib of Snapshot Auto GUI, you can force recovery anytime option.

  Note: If you are using snapshots, you can not immediately retrieve the expected amount of rear space.  The snapshot can always refer to this data, so until the snapshots that reference is deleted it will be allocated.

  Kind regards

  Don

• How do I cancel the mapping of a data store of esxi host without data loss

  Dear team,

  I want to cancel a data store that is mapped on two cluster mapping (cluster1 10 esxi host and cluster2 esxi 4 guests)

  
  

  
  

  Query1

  What step will be OK

  Disassemble = > detach = > start the activity of storage (storage poweroff) movement = > move the storage = > poweron = > join = > mounting

  or

  Disassemble = > detach = > team san will cancel the mapping = > start the activity of storage (storage poweroff) movement = > move the storage = > poweron = > san team will map the data store = > join = > mount

  Query2:

  Once I sail, I am able to see vpshere ha and dvs folder data, I just want to confirm if I want to take it apart and to separate the data store it will allow me to do it or it will throw an error, please confirm.

  Query3:

  If we remove and detach a data store, before that I have to cancel the registration of all the virtual machines?

  
  

  
  

  concerning

  Mr. Vmware

  Please find the right measures

  Query1

  
  

  before the take-off of export activity VM that are stored on the data store

  
  

  Home-online store of data and the data cluster store => select the data-VMs online store => add all columns => take export VM

  
  

  take the last export RVTool.

  
  

  
  stop all VMs-online you unsubscribe from all models and virtual computers-online RK on Cluster (change the setting-online data store-online here hearbeating we have to choose another data store and click OK)

  
  

  to confirm the new data store is visible as heartbeat data store select Cluster-online Sumamry-online state Custer-online Heartbeat Datastore)

  If we are able to see the new data store, then now remove old data from the heart rate data store store

  
  

  RK on Cluster (change the setting-online data store-online here hearbeating he have to uncheck the data store and click OK)
  

  
  

  disassemble => detach (you will need to perform this step on all esxi hosts)-online san team will be unmap-online beginning of movement storage (storage poweroff) => move the storage-online poweron-online san team will map the data-attach online store ((need to perform this step on all esxi hosts) => set up the data store)

  
  

  Register for all virtual machines

  
  

  PowerOn all VMs if get message (moved or copied) select moved.

  
  

  Query2:

  He doesn't throw any errors, will work flawless.

  
  

  Query3:

  Yes we must cancel the registration of all models and virtual computers before disassembling a data store.

  
  

  concerning

  Mr. VMware
  

  
  

  
  

• Cancel the mapping of space used Dell PS4100 SAN on the Windows Server 2008 R2 Hyper-V cluster.

  Is Dell has a tool to undo the mapping of used space of deleted VMS or data on the volume/LUN, the SAN from Dell does not give space automatically if you delete data. Volume/Lun is thick.

  You must install the HIT / ME tool and use the EqlReThin utility.  If you download the 'Dell EqualLogic Host Integration Tools for Microsoft Installation and user guide' on the support site, there is a description on how it works.

  -joe

• FW 6.0 EPA, cancel the SyncRep and MAP

  Nashua dear gurus,.

  I just EPA 6.0 FW and read the group administration Guide. This stipulates that it s recommended do NOT enable undo the SCSI MAPPING with ESXi 5 If you are using the standard replication. I understand that, because it could cause huge amounts of replication. Now, my question would be: this recommendation is part when using SYNCREP? I ask because with SyncRep EACH writing goes to the two pools, for example, if the SCSI UNMAP command is also a "write" command, it should NOT affect the SYNCREP in my understanding. Am I wrong?

  Best regards
  Joerg

  Since the v6 release notes: it goes the same for volumes of Rep SYNC, do not cancel the MAPPING.

  Munmap volumes and replicated

  It is not recommended to run the operations giving rise to SCSI unmap operations (for example, format or defrag) on the volumes on which the replication (including synchronous replication) is enabled.

  Such operations on replicated volumes lead zeros written in areas of destination of the volume. The writing of this article, of zeros can cause operations to take a long time to complete, and no space is reclaimed. As a result, Dell recommends you disable munmap on hosts or volumes (depending on the host operating system) that use replicated volumes. See the following sections for more information on deactivation and activation munmap in VMware ESX, Red Hat Enterprise Linux or Windows 8/Windows Server 2012 of operating systems.

• payment cancelled due to the detail of the map?

  Dear leader

  I received an e-mail that,.

  My payment has been cancelled because of the detail of the map.

  You will find what is the problem with the card, I have registered it?

  Thank you

  Kind regards

  Samir

  Purchased 18/09/15 CC is active.

  Given that the purchase is on Digital store, the credit card can be changed by management only.

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

  https://helpx.Adobe.com/contact.html?step=ZNA_account-payment-orders_stillNeedHelp

  Concerning

  Stéphane

• Look at the maps app will not stop

  When I look for direction in the maps on the watch application, it will not stop after that. I looked for directions to the airport, and then it does not cancel and kept taking me to the airport. I have ensured the application Maps on my phone was not working and he cancelled it but always watch will not stop.

  I tried it yesterday and now today the watch gives me directions to the airport.

  I tried to remove it from the docking, restarted my watch. Watch app from the phone Checked, but nothing works.

  Hello

  To stop your watch directions: open the Maps app on your watch > firmly press the display > press on for policy decisions.

• Is it possible to embed the map search option in the app in c ++

  Hi I want to add map search option in my App user must search for a place name and it should find geo location information. I saw the place selector class. But I did not understand how to use it. There is a sample but its on qml. I need that in c ++. And he also said that this class uses the local database to find locations. But I don't want to store a database. I just want it to be as google map application. Where you seek and find information. Thank you.

  The is no place picker control class there. I misundestood and lost time. Here is an example of code that works. Sound of the page selector class rather than the developer site.

  #include 
  
  PlacePicker *picker = new PlacePicker(pContainer);
  SelectedPlace *sp = picker->show();
  if (sp != NULL) {
    // Extract details from SelectedPlace object.
    label.text(sp->name());
  } else {
    // Either the user has canceled the operation or the location capability is not enabled.
  }
  

• Impossible to cancel the import of drivers job

  Hi all,

  Mirage by train to test and well very convinced by the product.

  I have started to import drivers this morning and for some reason, that the task has been suspended for the last 3 hours and nothing happens.

  To mornitoring of the task is impossible to cancel it. Option is grayed out.

  Anyone know how to cancel the task in a different way? Maybe a SQL query to kill the task?

  See you soon

  SEB

  I know that this had to be rejected, but this may be good for someone in the future.

  (1) open CMD on the server machine

  (2) run the following command--"c:\Program Files\Wanova\Mirage".

  DBCommand Server\Wanova.Server.Tools.exe' 'SRVMIRAGE\VMWAREMIRAGEPOC '.<--(location of="" sql="" database="" server="" name\sql="">

  MirageDB<---(SQL database="" name)="" "delete="" from="" workqueue="" where="" id="">

  I have seen this command works, it has been provided by the development of this problem with another customer

• VmomiError during the ssolscli.cmd

  Hello

  I have a very strange error when I run the ssolscli.cmd command to bing ceritifcate SSL trust to my secure token Service. I have run the command and you get the following error:

  D:\Program Files\VMware\Infrastructure\SSOServer\ssolscli >./ssolscli.cmd updateService d https://XXXXXXXXXX:7444/lookupservice/sdk u admin@System-Domain Pei xxxxxxxx-TR D:\certs\sts_id - ip D:\certs\sts.properties

  Initialization of provider of record...
  SSL certificates for https://XXXXXXXXXX:7444/lookupservice/sdk
  SSL certificates for https://xxxxxxxxxxx:7444 / sso-adminserver/sdk
  com.vmware.vim.vmomi.core.exception.MarshallException: com.ctc.wstx.exc.WstxIOException: bad character of null in the text
  at the exit
  Return code is: VmomiError
  18

  The other two services binded without a mistake and I rechecked and recreated my sts.properties file numerous times and tried to change the STSService to the IP address and I still get the error.

  My sts.properties file is:

  [service]
  friendlyName = m for Single Sign On
  version = 1.0
  ownerId =
  type = urn: sso:sts
  Description = the Single Sign On Server security token Service.
  
  [endpoint0]
  URI = https://XXXXXXXXXXXXXXXXXX:7444/ims/STSService
  SSL=c:\ProgramData\VMware\SingleSignOn\SSL\Root64.cer
  Protocol = wsTrust

  Has anyone experienced this before? If I run ssolscli.cmd listServices https://XXXXXXXX:7444/lookupservice/sdk it gives me all the correct information

  Gregg

  Hello

  A colleague has found the solution:

  Obtained with the client and tried to cancel the registration of services by changing the order of the switches on the controls even error.  Allowed to go out the DelService file and put the ID in it same error.

  Open until a new admin command prompt, listed services, selected code should be deleted ran a c:\oldid.txt Notepad to create a new file and placed the service ID in this and run the command and it worked.

  I tried another service using the strawberry of old files it renamed delservice.txt and got the error again.  Tried again, but renamed the file delser.txt error result.   Tried it with another file, the client had created called Del_Service.txt and got the error.

  Not sure what was with the formatting of the two files that the customer used, but just create a new file and put in the ID solved the problem. »

  Gregg

• AF:dialog cancel the problem on the new line of VO

  With the help of 11.1.1.4.
  
  I have an af:popup that contains an af:dialog which itself contains entrable components mapped to attributes of VO, the first being an af:selectOneChoice (list of the part of the body). The list of the part of the body draws from a LOV configuration on the underlying VO attribute. LOV rowset is initialized in the model of the line layer whenever the popup is called to make sure that it contains all the allowed values.
  
  Everything works fine except when:
  
  (a) user adds a new row to the underlying VO and invokes the popup to initialize the values of the new line, and
  (b) the user selects a value in a list of the part of the body, and
  (c) user chooses to cancel the dialog box
  
  The PopupCanceledEvent triggers a Delete on the underlying VO in the case above operation, to remove the new line has been added.
  
  It all works very well, but if the dialog box is now called either for another new line or an existing line, the list of the part of the body indicates the value that has been selected to b) above and not on the value as it is in line with model (this has been verified). If I add and remove line using the Delete operation out of an icon above the table of VO (outside), then no problem. The problem is not correct itself unless / until the user goes in the new dialog box and completes the process of adding line by pressing the button of the OK dialog box. User can then delete this new line using the icon and then edit and add all operations work fine again.
  
  All about the model seems very well, the problem seems to be that the user interface components in the dialog box are not properly initialize values which I know to be in the model WHEN AND ONLY WHEN the dialog box was canceled on the addition of a new line (cancellation of a change does not cause the problem). I tried various RPP requests to try to synchronize the items with related values, but not luck.
  
  Does anyone have any suggestions as to what might be going on here?
  
  Thank you

  Check this box:
  http://www.adftips.com/2010/10/ADF-UI-resetting-or-clearing-form.html

  Thank you
  Nini

• How to cancel the cataloguing of a folder?

  As a newb in LR, I Bond sometimes before I expect. In this case, I imported my map folder empty into my main catalog of LR (alone) and then decided, it was a mistake.

  The Dump of the map is the place where I first to transfer the files from my camera. This is where renaming and sorting takes place before the images are moved to a permanent location. I decided that I wouldn't rather manage this folder with LR since I have an app or two, I prefer for this process.

  Is it possible to cancel it?

  .. .or just right click on the folder you no longer want to appear in your catalogue and select 'delete '.  You will be informed that the folder and its contenets will be removed from Lightroom but not removed from the hard drive.

• Why Apple makes it so difficult to cancel the subscription at ITunes game?

  September 22, 2016

  I spent so much time today, just try to cancel automatic renewal of ITunes game!  GOING IN CIRCLES... First of all, on a PC, then on the IPad, according to all the instructions but do not enter any area I can see where Undo CHANGES, and then even tried to call you ON THE AUSTRALIAN site NUMBER WEB of APPLE, but calls abandoned while the consultant was of the privacy... IS THIS A DELIBERATE ATTEMPT TO STOP CANCELLATIONS?  This is the email you sent me, last year-

  This email confirms that you have renewed your 1-year subscription to Match iTunes for $34.99 on 10/05/15. This subscription will be automatically renewed each year, unless you turn it off not later than 24 hours before the end of your current subscription period. To cancel the automatic renewal of this subscription, connect to iTunes on your computer and go to the account information page.

  Yes, I did everything cela, but still could not CANCEL... Apple, you must SEND coordinated for this user, I need you to send me an email as soon as POSSIBLE, to allow me to cancel this subscription, because I'm about to use to communicate with my banking institution to ensure that another annual fee can't!  IT IS VERY FRUSTRATING!

  Hello

  You talk about Apple here. This is a user to user forum.

  The option to turn off auto renew has been removed. Sign in to your account and go to settings and select subscriptions.

  Jim

• I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I have challenged their load m

  I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I thought them charge me twi

  Can I have it please the number on I tunes support whether please or have them call me at * Leonardo B *.

  < personal information under the direction of the host >

• If I order a new watch how many days can I cancel the order?

  If I order a new watch how many days can I cancel the order?

  Hello

  It would be possible to modify and cancel an order prior to the point when it has reached "Preparation for shipping. After that, you will need to return it after reception.

  By placing an order, you will be informed of the maturity expected for shipping.

  You can also monitor the status of your order online (including any amendment to the end expected).

  More information and instructions:

  http://www.Apple.com/shop/help/viewing_changing_orders