Cancellation of WIP job after completing the work

Similar Questions

• Question: How to make data Disqualification Purge project after completing a work?

  Hi all

  I know how manually purge the data of the project by clicking on

  but I wonder if there is a way to Purge project data of the Disqualification after completing a work in itself.

  Thanks in advance for any response.

  Note that Disqualification 11 g, just released, includes the ability to create policy rules for the purge of the data where the jobs are executed with labels of execution.

  This does not include the data produced during the execution of the works interactively to the Director (i.e. development and test jobs).

• Ligtroom 6 best, I will describe my problem once the hour 1. After 4 weeks, I get the message "trial version Ligtroom 6 expired 2. You will be asked to fill out my license number 3. After completing the restart and get the message "error 16" 4. Never

  Ligtroom 6

  Better, I will describe my problem once right

  1. always after 4 weeks, I get the message "trial version expired Ligtroom 6a

  2. you will be asked to fill out my license number

  3. After completing the restart and get the message "error 16".

  4. all again manager install Adobe again and install this once again repeated problem Ligtroom each month can ensure that this stops my version is a purchased official version

  Now repeat the problem after only 4-5 days!

  Caveat! I'm not a computer specialist are not too complicated solution

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Error-1074360293 (IMAQdx Timeout) after completing the acquisition for some time

  My vision in LabVIEW application makes several acquisitions and successful treatment but then acquiring (grab) suddenly fails with a timeout error (-1074360293, IMAQdx: timeout). The error does not when acquiring only the images.

  After that the error occurred that no acquisition is possible. Although LabVIEW is closed MAX Returns a time-out error. Only restart helps.

  some details of the material:

  3 controllers FireWire (1394-a)

  3 cameras connected to the first two controllers, one third (total of 7 cameras)

  Mode for all cameras: 1280 x 960 Mono 8 fps 7.50

  The bandwidth for a FireWire controller is sufficient. (Three cameras on a single controller are running without any problem).

  Consume the application memory is short before or after that the error occurs. But I can't find where exactly.

  Until the error occurs a few minutes until one and a half hour pass.

  More details will follow.

  Is there a FireWire or specialist in the vision that can help you?

  Greetings,

  SHB

  Change the driver it seems to fix the problem:

  "Compatible (legacy) 1394 OHCI host controller" (in German: "OHCI - 1394-Hostcontroller (alt) konformer")

  With this pilot test has worked for more than 66 hours without raising an error.

  Some Articles about:

  http://www.RME-audio.de/forum/viewtopic.php?id=9827

  http://www.myvideoproblems.com/ProblemPages/CannotCapture.htm

• Does not start the web page after completing the configuration

  I have a problem with vCD 5.5.2 running on my lab at home. I made sure that all the prerequisites are met. The cell has been initialized properly without one mistake and I'm still not able to launch web page, no idea why this happens?

  vCD is installed on CentOS 6.x

  I enclose cell.log

  I hope someone can share his thoughts with me.

  Thus, all the cell.log told me is that the service obtained running.

  vCloud-container - debug.log will tell me if there is an error after starting the services.

  If this is a new installation of the OS, the firewall blocks outgoing default HTTPS traffic.  can you try to disable just the firewall for a short time, restart vmware-vcd service, wait for the cell.log to show finished, and then try again?  The firewall is the most common question on the newly installed outside the research forward/reverse DNS is not configured for both HTTPS and ConsoleProxy Treaty.

• After completing the download of a file on my computer, Firefox zip active Microsoft Excel to extract the zip file (which obviously does not work) - and I can't "debug" the problem because the download folder has been created by Firefox

  When I download ANY files on my computer (Windows XP), Firefox opens its ' own record (with Firefox icon); and displays the file name and a progress bar when file downloads - end with no zipped files NOT, as in no .zip or .7z, Firefox just stops (unless there is a process of "autonomous activation" in the file, such as an installation wizard)-it runs correctly.

  However, when it is a zip file, MS Excel is enabled - Excel says 'unrecognizable format' - I have plenty of "-cancellation).
  It has been produced for at least weeks - it just me is appeared that this started when I upgraded to firefox 8.0 (but not positive) - yesterday, I've upgraded to Firefox 9.0

  View > toolbars-> Uncheck Menu bar

• After completing the email and password in sync, nothing occurs, only 'works '. It lasts for hours.

  Nothing to add.
  Three days that I want to connect on https://accounts.firefox.com/signin?service=sync & context = fx_desktop_v1 & entrypoint = menubar

  You can access the account through this page?

  • https://accounts.Firefox.com/settings

  Try to delete the signedInUser.json file in the Firefox profile folder and delete the folder of weaving (Sync was formerly known as armor).
  If that is not enough then delete the prefs.js file to reset the prefs and may also remove the compatibility.ini file to reset the profile.

• Problem of recovering files after completing the reduced image of the system

  I wanted a quick and easy way to remove bloatware on my HP Pavilion dv6 laptop and I recently found the option to minimize the system image.  During execution of the task, I was given the option to first back all my files and I thought it was excellent.  After waiting 2 hours for her to create the backup, he created a 67.5 GB file on my backup drive and then proceeds to reduce to a minimum the system image.  While he was complete my phone restarted and went through all the steps of setting up for first use.  When everything was done, I plugged my backup disk and navigated to the folder of recovery of file titled "Backup_2011-10-28 125331.  In the file was a file "Recovery.exe" so I guess that I just had to run the file and everything would be restored.  However, he did create a file on the C: drive in the "System Recovery Files" which basically looks like a simple list of files.  The file that was done was only 12 GB, which makes no sense given that the backup folder initial took 67.5 GB on my backup drive.

  I assumed that this recovery file would simply perform a system recovery, restore all files created by the user where they were originally and basically to restore my system to how it was before reducing the image of the system, except of course for the fact that the image of the system would be less.  I was wrong to assume that or am I not successfully restore my system?  When enter windows and attempt to restore the backup created by some HP program that did it, the file is not even given as a possible source of save.  How can I get my computer to where it was before the restoration?  I had more than 100 GB of music, games and programs out there that are now lost and trying to remember what I lost everything will be very tedious, not to mention how long to actually get all the files.  Can someone help me with this? Thanks in advance!

  OK, what I learned hae is the backup created during the copy just for the recovery of all the files in the format of the image (management of stormwater in case you), the restore.exe was never to return to the original lcations since maybe it's different, so there just pictures of stormwater management to normal files and dumps then converts into a folder to restore you It is up to you to sort through them and put them in the appropriate places, stupid I agree, but that's the way it was designed.

  Back to your problem, I would like to rename this "System Recovery Files" System Recovery Files 2 folder, then try the recovery.exe once again, see if there is no option during recovery, make sure you select all files if given a chance, see if it produces more files than he did the first time.

  If this does not work there is a way to convert all the files management of stormwater to 1 wim file and then mount the wim file in explorer to copy the files you need from the image, it's very complicated process which I've never tried it myself.

  .

• After completing the upgrade Windows 7 laptop does not start

  A ran the Windows 7 upgrade on a new laptop Sony Vaio with Windows Vista. After installation is complete laptop ran fine for 2 days.

  Necessary to restart after trying to connect a new printer. Stop the laptop normally, but after a reboot would only boot to Windows Boot Manager.

  The problem is that the upgrade of Windows CD I have is not start even if the DVD has been the first priority in the boot sequence.

  If you are somehow able to boot from the installation DVD:

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD.
  3. choose your language and click Next.
  4. click on command prompt and try the following commands (they may or may not work):

  Bootrec /fixMBR
  Bootrec /fixBoot
  Bootrec /rebuildBCD
  Bootrec /scanOS

  Questions about installing Windows 7? Read this:
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• First elements 12 is cutting images after completing the project

  I recently completed a video clip and after the finalization of the draft project and saving it down like a wmv. file, I saw the video and parts have been cut. I use a lot of green screen keying in my videos and sometimes the top of the head of the people will be cut off and images are not aligned to the way I had them in the editing program. This only happens after I save and share the project, but still everything seems fine in the editing window. No heads or members are cut off and the back ground images for the look of effect green screen well in the editing window, once again the project is saved in the background images are not be stretched across the screen as they appear in the editing program. I don't understand why this is happening and I am looking help before I resort to changing my work once again.

  Case & point, why do I see in the edit window different from what I see after the project is completed? Help, please!

  screamindemon

  What operating system is running your 12 items first? For now I'll assume Windows 7, 8 or 8.1 64 bits in the cases where I need to mention details.

  What you describe is probably an incompatibility of the parameters of the project to import and export. If we start with the details.

  The project is set automatically to the preset or project that you have? (See change project Menu/Settings/general and readings for the Mode edition of time base, image size and Pixel Aspect Ratio even if they seem to be grayed out).

  What are the properties of what you put on the timeline of the project? Do the properties of the match source media details of the preset program you use.

  Then most likely to cause the problem... your export settings.

  What you have written, you probably use

  Publish + share

  Computer

  Windows Media

  Now the important part, that you choose for 'Presets' and what are your settings on the tabs in advanced and Audio of the selected preset button/video?

  The answers will be your contact information.

  If you have any questions about what is written or need clarification on this, feel free to ask. But the answers are the need for all of the foregoing.

  Thank you.

  RTA

• Unable to start the computer after completing the system scan using Microsoft Security Essentials BSOD error (: 0x0000007B)

  Original title: I cannot restart my computer and start windows after the analysis of the system running and the removal of any bad programs with Microsoft Security Essentials.removing
  I cannot restart my computer and start windows after the analysis of the system running and the removal of any bad programs with Microsoft Security Essentials. I have rebooted, tried to finally start work configiration and back still an error for windows startup. Attempted to enter the mode by F8 safe failed I then chose without auto restart in F8 and get the BSOD - he tells me to search for viruses and run chkdsk/f, but I can't access it. I tried to restart and it still does not work. technical information on the BSOD readings * STOP: 0x0000007B (0xF7ae9528, 0xC0000034, 0 x 0, 00000000 000000000. Please help it is essential to address them ASAP edition)
   

   

  Hello

  You can try the troubleshooting provided in the links below steps to fix the problem.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  http://support.Microsoft.com/kb/324103

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  http://support.Microsoft.com/kb/316401

• How to tell the Scheduler to shut down the computer after completing the task in Windows 7

  I created a task using the Task Scheduler that runs on my computer at 23:58 on Saturday and then back up my PC to my external hard drive from Seagate. That works fine, but I'm not finding a way to have Task Scheduler shut down the computer when the task is completed. I encouraged four hours for the backup must be completed. When I am absent Sunday or more I come home to find the PC always on. I have reviewed the task scheduler management articles and see no way to reach my goal. What should I do? Thank you.

  zigzag42

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are facing problems using Task Scheduler.

  I suggest you to refer to the suggestions by Aziz N replied on July 14, 2010 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/how-to-schedule-computer-to-shut-down-at-a-certain/800ed207-F630-480D-8c92-dff2313c193b

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Error message after completing the export to JPEG

  In Lightroom 6 windows 7 64 bit, I get an error message after the export is complete. Export to JPEG files are not affected or impaired, but this message is an annoyance that reflects that something is wrong.

  

  Advice or help will be appreciated

  Thank you very much for the mhoffman2001 patch, I followed the explanation without any problem and here's what I applied.

  No more error messages thank you.

  

• Notification of Scheduler job broken - but the work seems to work?

  Hello

  I hope you can help me, because I'm stuck with this problem:

  I have a DBMS_SCHEDULER - work that is scheduled for 06:00 every day. When I choose to DBA_SCHEDULER_JOBS, I see the State is "expected", failure_count is 0, is 1/max_failures, raise_events are "JOB_BROKEN, JOB_STOPPED, JOB_DISABLED.

  There is a notification for this task triggered by JOB_BROKEN, JOB_STOPPED, and JOB_DISABLED events.

  Now, every day, I get a notification like this:

  Job: SYSZSK. JOB_DELETE_ZSK_PROTOKOLL

  Event: JOB_BROKEN

  Date: January 7, 14 06.00.00.046633 AM + 02:00 the journal id: 69808
  Job class: JCL_FBI_NV Run count: count 1 default: count 1 Retry: 0 error code: 0 Error Message:

  BUT:

  -J' I can´t find a line in DBA_SCHEDULER_JOB_LOG with LOG_ID = 69808

  -I find a journal for work:

  LOG_ID: 282810

  LOG_DATE: 7 JANUARY 2014 05:00:01, 033737 + 01:00

  OWNER: SYSZSK

  JOB_NAME: JOB_DELETE_ZSK_PROTOKOLL

  OPERATION: RUN

  STATUS: SUCCESSFUL

  Can you give me a tip what going on here? Any help much appreciated...

  Best regards

  Gerd

  you might be looking at the wrong database.

• I have to keep the service pack 2 in program after completing the service pack 3

  I have to keep SP2 in programs after the installation of service pack 3?

  Yes, you do. But you can store.

  Cleaning after installation of SP2
  http://aumha.org/win5/a/sp2faq.php#after

  and/or

  XP SP3: Post Installation Cleanup
  http://aumha.NET/viewtopic.php?f=62&t=33827

  Please note this is only for Windows XP and is not on Vista or Windows 7

  TaurArian [MVP] 2005-2010 - Update Services