First elements 12 is cutting images after completing the project

Similar Questions

• On OsX 10.11.4 latest version of first Pro CC 2105 starts but after choosing new project nothing happens.

  On OsX 10.11.4 latest version of first Pro CC 2105 starts but after choosing new project nothing happens.

  All menus are in white.

  No command available, if not impossible to close the application without forcing the output with the Mac OsX system.

  Best regards

  Francesco

  PS., everything works fine with Premiere Pro CC on the iMac even 2014.

  Well SadBoyPro, to do this:

  Go to the Adobe site and click to download the first version from there.

  Creative cloud opens and says that every upgrade will be removed [GREAT!]

  Go and install the previous version, here everything works fine now.

  The upgrade is now displayed in the creative cloud: don't DO IT!

  Then me and you wait for an update of work

  Good bye

• Ligtroom 6 best, I will describe my problem once the hour 1. After 4 weeks, I get the message "trial version Ligtroom 6 expired 2. You will be asked to fill out my license number 3. After completing the restart and get the message "error 16" 4. Never

  Ligtroom 6

  Better, I will describe my problem once right

  1. always after 4 weeks, I get the message "trial version expired Ligtroom 6a

  2. you will be asked to fill out my license number

  3. After completing the restart and get the message "error 16".

  4. all again manager install Adobe again and install this once again repeated problem Ligtroom each month can ensure that this stops my version is a purchased official version

  Now repeat the problem after only 4-5 days!

  Caveat! I'm not a computer specialist are not too complicated solution

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Cancellation of WIP job after completing the work

  Hello everyone,
  
  There is a question of "Annulant the WIP job after completing the work.
  
  Please let me know how to solve this or workarounds.
  Give me the navigation please.
  
  
  Thank you

  Hi Adam;

  Please search your question in metalink as cancelling WIP Job there are 272 available docs. Please check. The best way to check your question in these docs

  Respect of
  HELIOS

• Is it possible to update the first pro and still be able to use the projects of the old version

  Is it possible to update the first pro and still be able to use the projects of the old version

  You can open projects from versions with Premiere Pro, Yes. But I agree with Bob - make a copy of the project and open the copy. You won't be "up the Creek" if something goes wrong.

• First Elements 10 does not work after upgrade from 8.1 to 10 Windows

  I haven't had any work in first 10 items from my computer updated from Windows 8.1 for Windows 10. Yesterday, I discovered that the videos I had edited and made first pay more. Videos 'Mpeg' now appear as "mi/gal." The original clips again will play, but not the edited videos.

  Is there a solution?

  I have to go back to Windows 8.1?

  If I go to the first 14 elements, these videos will be playable?

  First of all make sure that you uninstall and reinstall Premiere Elements after that you upgrade your operating system. Version 10 is a 32-bit program and will not be able to take advantage of the advanced architecture of Windows 10.

  Also to ensure that you have the latest version of Quicktim installed, according to the requirements of the program.

  If you have trouble running first Elements 10, the value that it is running in Compatibility Mode. It should work just fine - just not as well as new 64 bit versions of the program.

• With the help of first elements 12 for iPhone 5 video, change the publication. MP4 is choppy when the video is moving quickly

  I use first elements 12-day.

  I'm editing iPhone 5 video shot with the following specifications:

  Type: MPEG Movie (.) MOV file extension)

  File size: no more than not not 300 MB

  Image size: 1920 x 1080

  Frame rate: 30.00

  Audio Format: 44100 Hz - compressed - Mono

  Project Audio Format: 44100 Hz - 32 bit floating point - Mono

  Total duration: no more than not not 3 minutes

  Pixel format: 1.0

  Project settings:

  General:

  Editing mode: DSLR

  Time Base: 30.00 FPS

  -Video

  Image size: 1920 1080 horiz Green

  Format of the pixels: Pixels square (1.0)

  Fields: No fields (progressive scan)

  Display format: 30 fps timecode

  -Audio

  Sample rate: 48000 Hz

  Display format: Audio samples

  Capture:

  Capture format: DV

  Video rendering:

  -Previews

  File format: I-Frame only MPEG

  Compressor: MPEG I-Frame

  checked = optimize stills

  If I publish on the desktop and select AVCHD

  choose: MP4 - H264 1920 x 1080 p 30

  File type: H.264

  Image size: 1920 x 1080

  Frequency [fps] of image: 29.97

  Audio: AAC, 160 kbps, 48 kHz, stereo

  File size: 1531,05 MB

  Duration: 6 Min 30,00 s

  The video is choppy, whenever there is a moderate movement.

  During the first reading, it is perfectly smooth.

  All I want to do is be able to share this video on youtube, Facebook and watch it again on my computer of relatively high quality, but I'm willing to make compromises in order to get everyone to play smoothly.

  1st quarter) what should I be out this about accomplish what I just said?

  Q2) video must be only like 3 minutes after that installation but there seem to be 3 minutes of black screen at the end. How can I get rid of this black bit at the end?

  cwsteini

  Unless you have the information in front of you, please download and install the video properties MediaInfo reading program to determine the frequency of images or your video frame rates. Cell phone video is often characterized in variable rate which can (not always) create problems to get imported, video audio out of sync...

  MediaInfo - download reviews and free software - CNET Download.com

  Be on guard for any unwanted alongs carry with the MediaInfo. Excellent program, but those carry alongs can be a major nuisance. The reading of this program will tell constant compared to variable rate.

  Also check the display to confirm that you are working with progressive video and not interlaced.

  If variable rate, the next step would be to take video in brake hand and export it as H.264.mp4 with a rate constant, not variable. Use the median between the min and max.

  We will follow to your results.

  Thank you.

  RTA

• Error-1074360293 (IMAQdx Timeout) after completing the acquisition for some time

  My vision in LabVIEW application makes several acquisitions and successful treatment but then acquiring (grab) suddenly fails with a timeout error (-1074360293, IMAQdx: timeout). The error does not when acquiring only the images.

  After that the error occurred that no acquisition is possible. Although LabVIEW is closed MAX Returns a time-out error. Only restart helps.

  some details of the material:

  3 controllers FireWire (1394-a)

  3 cameras connected to the first two controllers, one third (total of 7 cameras)

  Mode for all cameras: 1280 x 960 Mono 8 fps 7.50

  The bandwidth for a FireWire controller is sufficient. (Three cameras on a single controller are running without any problem).

  Consume the application memory is short before or after that the error occurs. But I can't find where exactly.

  Until the error occurs a few minutes until one and a half hour pass.

  More details will follow.

  Is there a FireWire or specialist in the vision that can help you?

  Greetings,

  SHB

  Change the driver it seems to fix the problem:

  "Compatible (legacy) 1394 OHCI host controller" (in German: "OHCI - 1394-Hostcontroller (alt) konformer")

  With this pilot test has worked for more than 66 hours without raising an error.

  Some Articles about:

  http://www.RME-audio.de/forum/viewtopic.php?id=9827

  http://www.myvideoproblems.com/ProblemPages/CannotCapture.htm

• Photoshop elements Adobe 12 crashes immediately after that the editor is launched

  I just bought Adobe photoshop elements and 12 first. After that my first items installed, I was able to load the Organizer, but the editor crashes immediately after loading. I uninstalled, deleted all the files and folders of adobe and re-installed, only to find the same problem. The editor independently hangs if I load it from the screen flash launch or organizer.

  

  Thanks much for the reply, but I managed to get a conversation with an Adobe support person who has finally solved the problem. I ended up uninstalling, remove both files (sorry can't remember what they were called), re - install (on the C: drive, instead of my D: drive as before) and everything now works fine. Not sure if it was the other player or the files that I deleted that has solved the problem.

• Satellite 4080 Xcdt, small image after changing the resolution to 800 x 600

  Hello.
  After changing the resolution to 800 x 600 or less (while playing an older game BACK), the screen is reduced to the size of the postcard.
  Someone at - it an idea to solve this problem, (another driver display or s.th.)?

  Greetings, r.

  Hi Ralf,.

  In my view, there is a setting in the BIOS to force the screen image to stretch to fit the available space.

  Kind regards

• I need to reinstall Photoshop and first Elements 10. Where can I find the download link?

  I need to reinstall Photoshop and first Elements 10 on my Windows laptop. Where can I find the download link?

  http://www.prodesigntools.com/ has links to download for the various Adobe products.  There is a process to follow for the Adube authorization cookie, but it does not work.

• Does not start the web page after completing the configuration

  I have a problem with vCD 5.5.2 running on my lab at home. I made sure that all the prerequisites are met. The cell has been initialized properly without one mistake and I'm still not able to launch web page, no idea why this happens?

  vCD is installed on CentOS 6.x

  I enclose cell.log

  I hope someone can share his thoughts with me.

  Thus, all the cell.log told me is that the service obtained running.

  vCloud-container - debug.log will tell me if there is an error after starting the services.

  If this is a new installation of the OS, the firewall blocks outgoing default HTTPS traffic.  can you try to disable just the firewall for a short time, restart vmware-vcd service, wait for the cell.log to show finished, and then try again?  The firewall is the most common question on the newly installed outside the research forward/reverse DNS is not configured for both HTTPS and ConsoleProxy Treaty.

• Serving images while making the project After Effects with Media Encoder?

  SOOOOO.

  I went with SPECIFIC anti-aliasing on vector files.

  This causes rendering to crash if I do not purge every image.

  IF

  I want to make in the background using Media Encoder,

  PEUT

  I get to purge all images too?

  Does it not follow the project settings?

  Or is it a different preference in Media Encoder?

  Thank you

  TRIS

  As a process dynamic link, rendering SOUL does not allow for such deceptions. Eitehr it works or it's not. Only AErender and AE itself obey this setting particular pref. If you are simply interested in the rendering of BG, consider buying the BGRender of AEScripts script.

  Mylenium

• Import of Images in the IMAGES folder in the project manager

  Hello. I'm relatively new to Robo help 7, and after reading some documents, I still need help graphic images, please.
  
  I am importing of HTML files in my project.
  In the project manager, under files HTML (topics), I create multiple new folders and import HTML files in each of them.
  
  In doing so, I notice files with the same name in the IMAGES section.
  There is no graphic images in any of these files, however.
  
  I also didn't notice any IMPORT option to the Images section. I don't know how to put graphic images in none of these cases... or even if I can.
  
  Is can someone please tell me where, in my project, I can place the graphic images, so that the imported HTML them files display properly?
  
  No doubt I'm missing something obvious. Thank you! JD
  

  Hello and welcome to the forum.

  No need to relocate your images first, JD.

  On a topic, click on the Insert Image button, or select the picture in the Insert menu. HR will navigate to and select the images from anywhere on your network or hard drive.

  When you select an image (and save the subject? do not know exactly when the image moves!) it is stored in the images directory. He is not in a folder, although it would be a nice feature - but you can move the images to the right folder as they accumulate.

  Try it once — you'll see.

  I hope this helps!

• Images related to the project (wedding album)

  I just ask how is it possible to work with the ID using a normal navigation on file/images (like the old minijonction) when you insert multiple images in a project and you need to keep them on track (see easily images of witch you already insert into the project... as with red edges once the image was placed in the project.)

  Am I the only one who thinks that will be a really useful featuring, we have on Indesing or there is another way to work to have the same functional point of view?

  Hi Daniele,

  I wish I could say that Adobe I what to see in their software and they would be redesigning my own needs! There is a method to achieve, and it is through the feature request form. They say they are not, and generally they do not have. But over the decades, I got a few responses (with nearly a thousand applications) and each time it has been in two hours. They read absolutely these. So be concise in what you are looking for. Announcement on this forum is not the right channel.

  http://www.Adobe.com/products/wishform.html

  If I understand correctly, you are looking for is as a way to track which images have been placed in a project, is that correct? Or is it more? One thing to InDesign is a 'window' that developers can write programs that work with InDesign to do what it cannot. Some are for pay; Some are free. Your subject line says something else. I wonder if it is rephrased and reposted maybe someone else can point you in the right direction. Some companies will write programs for you if you pay them. If they think there is a market, maybe they would do and you could buy it from them.

  I'm just throwing ideas. Let me know if any adjustment!

  ~ Jane