Cannot accept the EULA and tried the solutions proposed

Similar Questions

• I get a message saying "the service cannot accept control messages" when trying to install AVG. What could be the cause?

  I get a message saying "the service cannot accept control messages" when trying to install AVG. What could be the cause?

  original title: error message

  Hello cd1968,

  Here's what he says about this error in the MSDN library (http://msdn.microsoft.com/en-us/library/ms833805.aspx):

  Explanation:

  There is a lag between the requested control and service control status. The service may be in a State of waiting to start, shutdown - pending or stopped.

  User action:

  Wait a few minutes and try your operation again.

  In other words, wait a bit and try again.  You can also try to reboot (be sure to allow time Windows to load completely) and then try to install it.

  Thank you
  Darin

• JI downloaded cs6 design and web premium in a single folder, I always get the message missing archives... I use pc and ie10 none of the solutions proposed if you please

  I downloaded cs6 design and web premium in a single folder, I always get the message missing archives... I use pc and ie10 none of the solutions proposed if you please

  Hello

  Some Windows product downloads include two files: a file .exe and .7z file. To install the software, it is necessary that the two files are downloaded and located in the same folder. Otherwise, an error may occur when you start the Setup program. Errors are "Windows cannot open this file" and "file archive part Adobe [product name] is missing."

  You can check the link for more information below.

  Start the program installation after the download Acrobat X, CS5.5 and earlier versions

  Please try the link below to download the product again.

  https://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

  I hope this helps.

  Kind regards

  Vivet

• Windows Update 0x800A0046 error code. Have tried all the solutions proposed in all instances, including running MS Fix It. Nothing works.

  Have tried all the solutions proposed in all instances, including running MS Fix It.  Nothing works.

  Did you use this guide:

  http://www.bleepingcomputer.com/virus-removal/remove-smart-fortress-2012

• Cannot open the PDF in Chrome, impossible to open the standalone player, cannot accept the EULA, etc..

  I use a Mac.

  I try to open a PDF in Chrome - I open it fine in Adobe Reader if I download it. When I open it in Chrome, I get the message I have to accept the EULA and revive to open the PDF in Chrome.

  I reinstalled Adobe, restarted Chrome and it works fine in Safari.

  When I go to the applications folder and try to open Adobe Reader (which is different from opening a PDF file I recorded on my Mac). The menu bar appears but is not the "Adobe" "empty" file - nothing happens but the menu bar.

  I searched all the stinking forums and nothing seems to work. It seems to be a persistent problem dealing with simple workarounds.

  For example, I tried: Version of Adobe Reader X 10.1.3 - cannot open a PDF in the browser... - does not work

  How can I get Reader to open on its own and accept the EULA?

  First remove the following files:

  (i) adobe Reader of / application

  (II) in the folder/Library/Internet Plug - Ins:

  (1) AdobePDFViewer.plugin

  (2) AdobePDFViewerNPAPI.plugin

  (III) from ~/Library/Caches

  (1) com.adobe. *.

  Now reinstall Adobe Reader. And launch the reader Application. Here come the EULA. Accept that and now you will be able to open PDFS in Safari.

  Chrome is a browser not supported for Reader/Acrobat. You can check this in the Adobe release notes.

  http://www.Adobe.com/devnet-docs/acrobatetk/tools/releasenotes/index.html

  Hope this will help you.

• Cannot accept the EULA in Kubuntu 14

  Hello

  I'm trying to install VMWare Workstation 10 (VMware-Workstation-Full - 10.0.3 - 1895310.x86_64.bundle) in Kubuntu. I can't accept the EULA. I tried to get into the 'yes' and 'y' and neither work. I get a response that I have to agree then the installation fails. I get the following errors in the log:

  [2014-07-07 08:18:29, 441] Top-level exception handler

  Traceback (most recent call changed):

  File "/ usr/lib/vmware-installer/2.1.0/vmis/core/transaction.py", line 414, in RunThreadedTransaction

  TXN. Run()

  File "/ usr/lib/vmware-installer/2.1.0/vmis/core/transaction.py", line 76, term

  Self.get ())

  File "/ usr/lib/vmware-installer/2.1.0/vmis/ui/console.py", line 49, show

  response = txn.ui.ShowEULA (eula.text, eula.componentName)

  File "/ usr/lib/vmware-installer/2.1.0/vmis/ui/console.py", line 384, ShowEULA

  Popen (self._getMoreBin (), stdin = PIPE) .communicate (input = text)

  File "/ usr/lib/vmware-installer/2.1.0/python/lib/subprocess.py", line 642, to communicate

  Self.stdin.Write (Input)

  UnicodeEncodeError: 'ascii' codec can't encode character u '\u201c' in position 428: ordinal not in range (128)

  If someone has encountered this? Unfortunately, I have more a support contract, so I can't open a ticket. I also tried the command line option '--a accepted the EULA "but he replied that it was not a valid option. Funny since typing - aid that provides optional. I already had installed 10.0.2 version, but the 10.0.3 upgrade failed and watered the plant. I also can no longer re - install 10.0.2, so my vm is not accessible until I get this resolved. Thanks to anyone for any assistance.

  Another thing to try:

  http://KB.VMware.com/kb/1007427

  --

  Wil

• I can't open pdf files in firefox, and I tried all the solutions proposed by others. How can I reactivate pdf in firefox?

  I have recently switched to Firefox to Google Chrome, and I find that I can't open all PDFs from the web in some way in Firefox. I can't download them and open them in Adobe Reader and I can't preview them in Firefox, or I can use the plugin from Adobe. I tried to use the solutions posed by users on this site, but none of them have worked. Whenever I have an amendment to the settings to try to resolve this problem, change never allows me to view the pdf file, and the setting reverts to the previous setting after the browser is restarted. I don't like how to display the file, but I need to be be able to see a preview or I need to be able to download it.

  I use an adobe download add-on, 3.0.0.2, and I have disabled. Now, I can actually open pdf files in my browser shows a preview, or download them as I see fit. Thank you!

  But clearly, there is an error with the add-on.

• The VM cannot accept the mouse and keyboard in Windows 8.1 hosted environment

  Hi experts,

  Recently, I installed VMWare Workstation on Windows 8.1 10.0.2. Loading VM existing comments, I found that the guest VM (Windows 7 and Windows Server 2008) could not accept a keyboard input and mouse click. I wonder if anyone has experienced the similar case and all available solutions.

  Thank you

  Brian

  I have a similar problem that arose just in these days too in the Console Workstation 10.0.2 on update Windows 8.1 (works RDP via remote access to the VM, i.e.). Œuvres for keyboard, but the mouse does not work on any type of VM, Windows 2012 R2, Windows 8.1, Ubuntu 14.04. New installation of virtual machine or reinstall workstation 10.0.2 brand does not solve the problem either. Last update of Windows on Jun - 16, was a cumulation of KB2962409 who might have something to do with it.

  Thoughts anyone?

  64dude

• Cannot install the Solution Center in Windows 7 for HP7310

  I have a HP7310xi AIO that works very well until recently.  I've recently updated Win/XP to Win 7 32 bit and the printer software will not be installed correctly.  I downloaded and tried all the diagnostic tools that I can find on this site, nothing helps.  I can print but cannot scan due to lack of Solution Center software.  I want this to be a device connected to the network and part works very well with the printer, but I repeat, it will be no scanner - is network or USB accessory.

  I downloaded (several times) the file of the AIO_CDB_Net_Full_Win_WW_130_141 software, which is supposed to install the necessary software, but IS NOT INSTALL the Solution Center.  I tried HPPIW for installation and also HPHNDU and HPPDU for the diagnosis of the printer, and who work very well.  I also tried HPPSdr (who works for the printer, but not scan) and HPSDU, which does not at all.

  I still have my original installation CD and I tried, but of course it does not work with Win 7.  I also tried to uninstall the entire software package and then try to re - install, also without success.  It seems that the uninstall process is incomplete, or at least that's my guess.  I tried running also uninstall batch since the original installation CD files (the files to \util\CCC\Uninstall, Uninstall_L1, etc.) and they seem to work, but still the re - install subsequent does not install Solution Center.

  I recently ordered the customers a new installation CD, expecting a full installation CD for Windows 7 and receive.  The label of the CD says it's for "HP Officejet 6300, 7200, 7300 all-in-One-series", and also that it is "Version 13.1.0" and "Windows 7" and "Multiple languages"  It is the number of piece CB744-10003 and seems to be exactly what I need.  HOWEVER... This is ACTUALLY ON THE CD!

  Usefully, the label gives the following instructions:

  Insert the CD in your CDROM drive

  All Windows operating systems:

  (a) click on 'Start' in the task bar, then click on 'run '.

  b} type d:\Setup and click OK (where "d" is your CD drive letter"

  This is exactly what I expected to see on an installation CD; BUT there is NO "SETUP" FROM THE CD FILE!

  The content of the CD is exactly TWO FILES:

  AIO_CDB_Net_Full_Win_WW_130_141.exe, and

  AIO_CDB_Net_Full_Win_WW_130_141.MD5

  The first file is the same as I've downloaded several times on your website and many, tried several times to install.

  THIS CD DOES NOT CONTAIN WHAT THE LABEL SAYS WHAT IT SHOULD CONTAIN.

  I spent a lot of time on the phone with 'Technical Support' (telephone number 1-800-474-6836) and just got a huge evasive.  The best suggestion they could offer was that I should 'upgrade' my printer!  I know the printer is old, and I know that the printer itself is not supported.  However, I expect better than that of a software package that is supposed to take care this device on Windows 7 AIO.

  If I can't get this resolved successfully, I'll upgrade my AIO - but it WILL NOT BE ONE OTHER DEVICE HP!

  Hmm...  I have an Officejet 7410 similar, I used the same configuration file to install and have used it for a few years on my Windows 7 system.  A few questions:

  You have the printer connected by USB or network?

  You said that you had upgraded to Windows XP.  Was this a clean install on the XP machine?

  Are there any error messages during installation?

  There are a few things to try: If the printer is connected with USB, unplug it before you continue.  Navigate to the folder folder (open the Explorer and folder type in the address bar), look for a directory starting with 7z and a date corresponding to when you tried to install the printer.  Go to the util/ccc directory in the 7z... directory and run uninstall_L3, uninstall_L2, and uninstall_L1 files.  (This is the program of uninstalling the version of Windows 7, it might be more effective than the XP uninstall program).  After you run each file three batch restart the computer and log in as a user with administrator privileges.  At this point, run the Setup program.

• BlackBerry cannot accept the connection via the Mobile network?

  Hi all, on Blackberry, I want to open a server socket to listen to a connection come from other devices.

  Here is my code:

  String url = "socket://:12345;deviceside=true";
  ServerSocketConnection scn = (ServerSocketConnection) Connector.open(url);
  SocketConnection sc = (SocketConnection) scn.acceptAndOpen();
  

  Mobile network on that BB is ok, but it cannot accept any connection.

  I also use its mobile phone network to connect to other servers, it works fine when it's the client socket.

  I tried with the Wifi network, and it works very well.

  String url = "socket://:12345;interface=wifi";
  ServerSocketConnection scn = (ServerSocketConnection) Connector.open(url);
  SocketConnection sc = (SocketConnection) scn.acceptAndOpen();
  

  In my view, Network Service Mobile prevented so that other devices connect to it, is it true?

  Please explain it to me, thank you very much!

  This approach only works for mobile connections, when the data are pushed to the device.  You cannot use it to connect to other phones directly.  Sorry

• Cannot accept the terms of use

  I'm trying to update apps on my phone and I am informed that "media Apple Service terms have changed" I press agree and and I get nothing. Is happening?

  Hi HappyMan2120!

  I understand that you are unable to accept the terms and Conditions on your iPhone 6. It is important to be able to update your applications!

  You posted at the time where the system status page reflects a problem with the iTunes and the App Store: Friday, September 16, 2016, some users experienced a problem with the iTunes and the App Store.

  The system status page now takes into account that the iTunes Store and the App Store work as expected. Please try again. If you have problems, restart your iPhone, and then try again. Here's how:

  Restart your iPhone, iPad or iPod touch

  Enjoy your weekend!

• Photosmart C6180 all-in-one: cannot install the solution on 8.1 Center

  I received a message that there was a problem with the Solution Center. I uninstalled, but were not able to reinstall.  I thought that maybe the printer Installation Wizard might help, but that can not install no more. The printer is getting to be about 7 to 8 years, but still works fine. The 8.1 is an upgrade of Windows 8. When I choose the download, nothing happens.

  Hello layor.

  Welcome to the HP Forums.

  I see that you have a problem for the printer, re-installed on your computer.

  If you have the printer connected to the computer with a usb cable, please remove both ends and pass the cable on the side for now.

  Please start by clicking on the following link for uninstall the printer software.  We want to make sure that the old software has been completely removed until we are trying to re - install.

  Once the uninstall is complete, restart the computer so that the changes take effect.

  When the computer is back on, disable firewalls or anti-virus protection.  We don't want anything blocking the download depending on whether I'm going to give you.

  Here is the link for the drivers and software HP Photosmart full feature.  Save this file on the desktop of the computer so that it creates its own icon.  It will be easy to find when the download is complete.

  Double-click the new icon and follow the installation instructions.  You will receive connectivity options. If you choose to use a USB connection, do not connect it until you are prompted to do so.

  If you have any questions or concerns, feel free to write me again at any time.

  See you soon,.

• OfficeJet 5610xi: cannot open the solution (used to scanning!) Center

  Update Windows 10 yesterday and when I tried to scan a document, that the Solutions Center has emerged for a fraction of a second. I have uninstalled and installed the latest driver of full version. When I place a document or try and open the solution Center I hear the critical stop. It prints, but have no idea of what's going on?

  Do not use for anything but scan!

  Help!

  You are a GENIUS!

  I certainly enjoy!

  Took me awhile to find the update of Windows, but I did it!

  I use Firefox and Google Chrome so I hope that the security warning has not touched me.

  I guess Microsoft will have an update I just uninstall to fix the problem, I had?

• No Audio output device is installed... need more suggestions I already tried the solutions proposed by the Help menu.

  I get the message "no Audio output device is installed" with the little thing red x in the lower right corner of my computer screen. I looked up problems and common solutions.
  I uninstalled the device drivers in the menu equipment and also in the menu programs and features, after this, I restarted my computer before reinstalling.
  I did it too, but instead of reainstalling manually, I plugged my audio in a different speaker and let the computer to reinstall the driver by itself.
  I restarted the computer, the system restored the computer, put it to sleep, awake it save, close and let rest before restarting it.
  I checked the BIOS menu and changed the sound is activated instead of auto and tried uninstalling and reinstalling my drivers with this option, but the small x is still there.
  When I go into my control panel Device Manager and open the sound video and game controllers, I see my Realtek High definition audio. I open it to properties and it says it's working properly... then why my sound is not working? I've also updated the drivers and downloaded specifically on the realtek site, but no difference was filed.

  The sound is working again. I went camping for 2 days and came back, and it worked. It did NOT work once again before I left, he was dead. It sounds terrible, it of quiet and fades quieter and the but it works.

  None of the suggestions given here did something to help my problem. The proposed update does not work on my computer, I couldn't even download. I'll probably install a new sound card, but I would have liked your comments on this suggestion since I asked if this might be the problem several times. I'm annoyed that there was no way real and say what my problem is that after I answered engineers none of them responded to additional feedback I had given.

• Cannot install the solution without CD Center

  When lights in my office, I got a message that the Solution Center cannot be installed because I need the CD for it.  I do not know what CD I need.  Can someone help me with this problem?  And is it related to Microsoft or another program?  I have Vista Home Premium with Service Pack 2.

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/Solution-Center-disk/m-p/13153

  Read the information above.

  It is a problem with the HP software.

  Contact HP,

  See you soon.

  Mick Murphy - Microsoft partner