The VM cannot accept the mouse and keyboard in Windows 8.1 hosted environment

Similar Questions

• Pavilion 550-153NA: allow me to interact with the mouse and keyboard when Windows 7 starts at startup

  Hello

  I am trying to downgrade from Windows 10 in Windows 7. I tried to install Windows 7 but it keeps telling me that "Windows Setup experienced an unexpected error. To install windows, restart the installation. "I rebooted several times, but I still have the error. Then, I tried to install it by starting the drive at startup. All charge very well and the configuration screen appears. But I went to move the mouse, but it should not move. I tried several different mice and keyboards, but there was no hope, both USB 3.0 and 2.0. I did some research and found that you have to enable 'Legacy Support' in the BIOS. I did this, but there was still no movement.

  If someone could apply their knowledge via a comment, it would be very appreciated that I constantly tried since end of December 2015!

  Thank you very much

  I would try this new link.

  __Windows Setup has encountered an unexpected error. to install the reboot, the installation error code 0x0

  Let me know if it works

• Center mouse and keyboard in Windows 7

  We have upgraded to Windows 7 from XP SP3.  In XP, we used the Microsoft Digital Media Keyboard 3000 with its five 'my favorite key' to open programs and folders on our PC.  In XP, we were able to tie a 'Favorites' key to open a folder on the PC.  The center of the mouse and keyboard in Windows 7 won't allow us to open a folder general store, it only helps us to open.

  Is there a work around for this?  I can try to disable this program and install the utility from the CD that came with the keyboard, but I prefer to use the utility built into Windows 7 because it is native to the operating system.
  Thank you guys!

  "Mouse and keyboard Center" are incorporated into Win7? Not mine. Basic 'Keyboard' and 'Mouse' on the Panel.
  A native utility to the OS is necessarily superior to third party applications.
  Generally, the software that is provided with a device adds flexibility to the product and in many cases is required for all features.

  The version of the "Center of keyboard and mouse" the disk would probably
  an older version. Try one that suits your Win7 version from the link below.

  http://www.Microsoft.com/hardware/en-us/d/digital-media-keyboard-3000

  .

• I've upgraded to window 10, but not happy with windows 10 I returned to windows 7, but I'm unable to log on to the pc. the pointer of the mouse and keyboard are frozen device, even in safe mode.

  After the upgrade to windows 10, I loved not the style was thus to Windows 7, but I have not been able to log on the PC since. He's going through commissioning, but when on screen password box the pointer of the mouse and keyboard do not respond.

  This happens in safe mode for.

  The PC is a Sony Vaio laptop.

  Any suggestions,.

  John

  Hello Orwell,

  Thanks for posting your query in Microsoft Community.

  You have a Windows 7 installation disc?

  As you cannot start your computer at all, I suggest to run a Startup Repair to repair the damaged boot system files and try to boot into normal mode. See the section: How to use Startup Repair in the following link.

  Startup Repair: frequently asked questions

  If this does not help, try to boot from a disc to install Windows 7 on the Windows recovery environment mode and then try to run the Startup Repair tool and check if you are able to start normally with mouse and keyboard.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• problem with the mouse and keyboard and windows update does not work

  Since last week to start the computer, I get an error message that the mouse and keyboard functions do not work. He then seeks the errors and then indicates that the service restarts. I want to fix this problem and according to Microsoft hardware, I should download "mkc.msi", which is missing from my computer, but when I do a search for a download, it always automatically directs me to the section "community". How can I correct this problem and get the appropriate download? I use Windows Pro 64 bit with IE 11 on an Acer laptop. I have the Acer site but it was a great help. Also, for the last 6 months, I could not update my computer windows update feature does not work and no error code is presented. I tried everything to restore or re-download the windows update feature, but nothing works, or I can't find a source. I got a blue screen 3 times indicating that windows must be updated and has been the reason for the blue screen. Unfortunately, I don't have a Windows 7 reinstall drive when restarting it spilled about 85 MG of data but not identify what has been dumped. Of course I could use help on this major problem as well even if it cannot be in the category correct community.

  Hello

  I understand that you are having trouble downloading MKC. MSI. I would certainly help you to fix this problem.

  Method 1:

  If you are referring to Microsoft Mouse and keyboard Center, then check out these links to download.

  Download mouse and keyboard Center to get the best out of Windows 8

  Mouse and keyboard Center 2.0 (formerly IntelliPoint and IntelliType Pro)

  Method 2:

  You can consult the following Microsoft article if you are unable to install the updates of Windows on the computer.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• is there a single mouse driver to carve microsoft ergonomic mouse? The "Mouse and keyboard Centre 2.3" driver/software is not compatible with my other keyboard...

  Hello!

  So I went on the microsoft Web site to download the software/driver for my "Microsoft sculpt ergonomic mouse", but is the only driver/software they listed the "mouse and keyboard Centre 2.3", which seems to be for their mouse and keyboard...» I tried to install, but after installation than my other brand non-microsoft (mark i-rocks) 2.4 ghz wireless keyboard Connect is more to his receiver and I am unable to use the keyboard. I tried resynciing and everything but nothing works only as long as this "keyboard and mouse center 2.3" driver/software is installed, so now I have to uninstall that and just use the regular driver for the "microsoft sculpt ergonomic mouse" I have, so I can use my keyboard...

  I want to know, is there another older version of mouse only driver/software that I can use with my "ms sculpt ergonomic mosue?  Maybe the latest intellipoint mouse driver would work? What is the latest version and how to find?    or only the "keyboard and mouse Center 2.3" works with this mouse?  so in this case, I have no other choice than to use the generic mouse driver?

  Thanks in advance for the help!

  lendbz

  I finally thought to it. Apparently, when you install the software/driver "Mouse and keyboard Centre 2.3" for the "mouse sculpt ergonomic microsoft", it will install both the driver for mouse and keyboard correspondence pilot as well, even if I only have the keyboard.  I tried this software even with my old microsoft natural wireless laser mouse 7000 and time that he installed only the mouse driver. I'm guessing that the nano-receiver for the mouse ergonomic sculpt can receive both the ergonomic keyboard and ergonomic mouse? .

  If the software installed one "microsoft USB dual receiver Wireless Mouse" under "Mice and other pointing device" in the Device Manager and a "receiver double USB microsoft wireless keyboard' under 'keyboard '.  What I did is simply to go into the Device Manager and uninstalled the driver "microsoft USB receiver double wireless keyboard" and check the box to "delete the driver for this device" so that the keyboard driver will not return and be a pilot and leave just installed microsoft mouse, so now I don't have that the "microsoft USB dual receiver Wireless Mouse" and the generic driver keyboard "HID Keyboard Device" in Device Manager to the the microsoft place unwanted, one, now I can go ahead and install any brand wireless/wired keyboard and the microsoft keyboard driver no longer interfere with it.

• Windows 7 take too long to the mouse and keyboard anable.

  Hello

  I have replace my SSD HARD drive (2 hard drives 120 GB each RAID 0) w / Windows 7 Pro 64 bit. After the replacement windows take longer time to activate the mouse and the keyboard - 5/10 seconds.
  I've updated the drivers for the two, but still have the same question. The boot is faster, but the mouse and keyboard take longer to wake up.

  Any help?

  Thank you

  M. Vilela

  Hi MVilela,

  Thanks for asking this question to Microsoft Community!

  I understand that after the replacement of the hard disk of the computer takes too long to turn on the mouse and the keyboard.

  Your Windows 7 is better suited in the TechNet forums. I suggest you to send your query there.

  Here is the link: http://social.technet.microsoft.com/Forums/en-us/w7itproperf/threads

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Bluetooth Arc touch mouse without being detected by the "mouse and keyboard Center."

  The mouse is paired with your PC via bluetooth and works very well.  (Please re-read that last sentence before you send information on how to pair.)

  However, when I open the Microsoft Mouse and keyboard Center, it says "no device detected".  For example, I can't change the settings of the mouse. There are the most annoying rattling noise that I would turn off.

  Have uninstalled Microsoft Mouse and keyboard Center, reinstalled latest version. IM using windows 7.

  Hello Frazer,

  We want to get this support, please follow the steps on how to solve Microsoft Mouse and keyboard issues:

  1. run the hardware store in Windows 7.

  2 steps on how to install the driver in compatibility mode:

  a. do the driver installation file right click and select properties and then tap or click on the Compatibility tab.
  b. check run this program in compatibility mode.

  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.
  d. try to install the driver and verify.

  Let us know how it goes.

  Kind regards

• Trackball Explorer not included in the center of the mouse and keyboard 2.2.173

  All versions of the center of the mouse and the keyboard (by 2.1.177) have included support for trackball Explorer.  MS site shows that it is a device that is supported for mouse and keyboard Center, but the current version 2.2.173 is a template for the trackball Explorer and device file is no longer appears in the central screen of the mouse and the keyboard.  What gives, and when it's going to be fixed?

  Just noticed this myself after Windows Update has given me a new version of the center of keyboard and Mouse - Trackball Explorer is most recognized that unlike that suggests the Web site.

  Have had to reinstall IntelliPoint 8.2 until this has been resolved...

• Cannot configure Microsoft mouse and keyboard left-handed Center

  With regard to:

  I use the mouse with my left hand. Prior to Windows 7 updated with the Microsoft Mouse and keyboard Center I could change my mouse for left-handed people click (which means, primary click secondary click left and right). Now, with the update. There is no way to change the way I need it, lefty.
  I tried to uninstall Microsoft Mouse and keyboard Center but without success on that. Research and research everywhere nothing, looked in the web for answers and nada! Please help me, cheers!

  Well, disappointment! MMKC is only for MS mouse :-(  I had assumed (Yes, I know what it means) that you use a Microsoft mouse.

  You can uninstall the MMKC via Control Panel > programs and features. But unless you go to Windows Update and hide than a update or it will reinstall itself. You have your updates automatically download and install the value? If so, you need to temporarily change to another parameter, so you can hide the update.

  Once MMKC is uninstalled, then your mouse should return to the driver that you are using. If this isn't the case, then you need to reinstall the CD that comes with it (if any), or of their support site.

  SC Tom

• Windows 7 Home premium da 64 bit - set the mouse and keyboard

  3 month old samsung RV520 laptop.mouse cursor moves randomly.  in typed text, it jumps around in other places.  It does in the two
  Hotmail and verizon accounts e-mail, also in microsoft word.  the change scree sometimes without my click.  Samsung updates will be
  No installation, the screen scrolls not in far enough for me to accept square.  the location of the text is passed to different places on
  8fois by typing this short message.  Thanks for any help.  -Thomas beard

  Hello ThomasBeard,

  This thread has been created in the Microsoft answers Site Feedback forum. the Microsoft moderation team has moved this thread on the forum of the Performance and maintenance.

• How will I know when to load the mouse and keyboard on my IMAC?

  IMAC late 2015. El Capitan version 10.11.5. 1.6 GHZ. Intel i5 processor. 8 GB.

  How will I know when to charge my rechargeable keyboard and mouse? How can I tell when it is fully charged. Where can I find info on my IMAC so I must not ask about every little thing. The IMAC is new to me. Thank you

  The iMac will appear a message when is running out of power. Also you can check the charge level of your device from the Bluetooth icon in the menu at the top of the screen bar.

  Recharge the battery in your Apple - Apple Support accessory

• I have problems with the mouse and keyboard from freezing when scrolling or by typing

  I have problems to scroll down to a file because everything freezes at some point and it is impossible to read the rest of the article.

  I also experience problems when I try to type as I hit him at the same time letter 3 or 4.

  Could someone help me because I don't know what to do.

  Norman John

  Work through start-up mode minimum troubleshooting to see if a startup program is causing problems.

  331769-how to perform a procedure to clean boot (XP & Vista)
  http://support.Microsoft.com/kb/331796

  If that allows to identify the culprit, something may have slipped beyond Microsoft Security Essentials.

  This scanner. Allow two hours for this execution.
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Don

• How do we uninstall Center microsoft mouse and keyboard when I can't find the entry so that it doesn't matter where

  I tried to install Microsoft and center mouse keyboard or intellipoint may I use one of my Microsoft Mice. They are both wireless and when I tried to install the center of the mouse and keyboard, I got a prompt that he neede to be uninstalled before it could be reinstalled. That's fine, but the entry is not found in the directory or the start menu. Same thing with the Intellipoint. A States there already an installed updated version or a previous version installed and must be uninstalled before you can reinstall. It's also the not found in programs and features or the directory or the start menu or the Program Files folder... You feel me again? How can I uninstall if I can't? I used the Microsoft fix - it for install and uninstall, but it asks for a code of product number 38 of the center of the mouse and the keyboard in order to uninstall. I am at a loss as the way which these uninstall at least that I get directions to the registry uninstall or the product code so it is possible the MS Fix - it.

  Hi, Julio99,

  Don't you see not peripheral compatible HID in one of these places?  Look in the Device Manager, programs and features/uninstall programs

  Have you used this MSFixit?

  Run the fixit and check.

  Solve problems with programs that cannot be installed or uninstalled