Cannot access ASA from outside

When I try to use the Launcher ADSM to connect to the external interface of the SMDA my connection fails. I have configured the ASA to allow my IP address http connections, are there other measures that I have to fill

Hello.. That's all you need

Enable http server

x.x.x.x 255.255.255.255 out http

where x.x.x.x is the public address of which you connect

You are able to connect from inside your ASA... ?

I hope that helps... Please note this!

Tags: Cisco Security

Similar Questions

Remote VPN users cannot access tunnel from site to site

Cisco ASA5505.

I have a tunnel of site-to-site set up from our office to our Amazon AWS VPC. I'm not a network engineer and have spent way too much time just to get to this point.

It works very well since within the office, but users remote VPN can not access the tunnel from site to site. All other remote access looks very good.

The current configuration is here: https://gist.github.com/pmac72/f483ea8c7c8c8c254626

Any help or advice would be greatly appreciated. It is probably super simple for someone who knows what they're doing to see the question.

Hi Paul.

Looking at your configuration:

Remote access:

internal RA_GROUP group policy
RA_GROUP group policy attributes
value of server DNS 8.8.8.8 8.8.4.4
Protocol-tunnel-VPN IPSec
value of Split-tunnel-network-list Split_Tunnel_List

permit same-security-traffic intra-interface

type tunnel-group RA_GROUP remote access
attributes global-tunnel-group RA_GROUP
address RA_VPN_POOL pool
Group Policy - by default-RA_GROUP
IPSec-attributes tunnel-group RA_GROUP
pre-shared key *.

local pool RA_VPN_POOL 10.0.0.10 - 255.255.255.0 IP 10.0.0.50 mask

Site to site:
```
  
```
card crypto outside_map 1 match address acl-amzn

card crypto outside_map 1 set pfs

peer set card crypto outside_map 1 AWS_TUNNEL_1_IP AWS_TUNNEL_2_IP

card crypto outside_map 1 set of transformation transformation-amzn

I recommend you to use a local IP address pool with a different IP address that deals with the inside interface uses, now you are missing NAT are removed from the IP local pool to the destination of the site to site:

NAT_EXEMPT list of ip 10.0.0.0 access allow 255.255.255.0 172.17.0.0 255.255.0.0

NAT (outside) 0-list of access NAT_EXEMPT

Now, there's a dynamically a NAT exempt allowing traffic to go out and are not translated.

I would like to know how it works!

Please don't forget to rate and score as correct the helpful post!

Kind regards

David Castro,

Cannot access Skype from PC

Good morning,

Today, I have a problem of access to Skype from PC. After you have entered the user name and you press the Login button, Skype shows this screen forever. After you have installed the latest version (7.30), the problem persists. Yesterday this medication worked well... Note that on other devices, such as smartphone or tablet, I have no problems.

Thanks in advance for any information.

Marco

Dear readers,

Please see this post Skype heartbeat:

http://heartbeat.Skype.com/2016/11/broken_sign-in_experience_in_s.html

Kind regards

Elaine

__________________________________________________________________________________________________
Your question has been answered? Please click on the link to accept as a Solution for everyone can quickly find what works! As a post or want to say, 'Thank You ' -? Click on the button of congratulations !
Reliable information: Brian Krebs: 3 basic rules for online safety

ePrintCenter - cannot access files from emails

Hello!
I just tried to access the file to an e-mail sent, that appear in the eprintcenter. The e-mail address is allowed, but I can't access this file:

When I activate the file I can just remove it. Other functions (such as preview/print/download) are disabled.

The file is an Excel file and is less than 10 MB.

How can I access the file?

Thank you!

OK, problem seesms to be fixed. It's probably a bug for a short time in the eprintCenter.
Now I can access the files.

Cannot access the windows of links in Outlook Express e-mails

Cannot access windows from links in emails outlook express, I use windows xp. THAT IS TO SAY 8

Original title: outlook express

Make sure that IE is the default browser, not opera, at least for now.

1 start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: Click on the arrows pointing down to the right of the CUSTOM (important!) configuration | Browser: select Internet Explorer here (do not use my current browser or Opera).

Illustration: http://www.winsupersite.com/images/reviews/xp_sp1_beta_03.gif

2. check your settings here: IE tools | Internet Options | Programs | Default web browser.

3 test cycle.

~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

ASA 5505 VPN established, cannot access inside the network

Hi, I recently got an ASA 5505, and I spent weeks to find a way to set up a VPN on it.

After a few days, I finally found the solution to connect to my ASA with a VPN client yet and cannot access devices that are connected to the ASA.

Here is my config:

ASA Version 8.2 (5)
!
hostname asa01
domain kevinasa01.net
activate 8Ry2YjIyt7RRXU24 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
switchport access vlan 5
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
interface Vlan5
No nameif
security-level 50
IP 172.16.1.1 255.255.255.0
!
passive FTP mode
DNS server-group DefaultDNS
domain kevinasa01.net
permit same-security-traffic intra-interface
Remote_Kevin_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.254.0 255.255.255.240
inside_nat0_outbound list of allowed ip extended access all 192.168.254.0 255.255.255.0
inside_nat0_outbound list of allowed ip extended access entire 192.168.1.0 255.255.255.0
sheep - in extended Access-list allow IP 192.168.254.0 255.255.255.0 192.168.1.0 255.255.255.0
access extensive list ip 192.168.254.0 outside_access_in allow 255.255.255.0 any
access extensive list ip 192.168.254.0 inside_access_in allow 255.255.255.0 any
pager lines 24
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
pool pool 192.168.254.1 - 192.168.254.10 255.255.255.0 IP mask
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (outside) 1 192.168.254.0 255.255.255.0
NAT (inside) 0 access-list sheep - in
NAT (inside) 1 192.168.1.0 255.255.255.0
NAT (inside) 1 0.0.0.0 0.0.0.0
Access-group outside_access_in in interface outside
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
management-access inside
dhcpd outside auto_config
!
dhcpd address 192.168.1.5 - 192.168.1.36 inside
dhcpd allow inside
!

a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal Remote_Kevin group strategy
attributes of Group Policy Remote_Kevin
value of server DNS 192.168.1.12 192.168.1.13
VPN - connections 3
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Remote_Kevin_splitTunnelAcl
kevinasa01.NET value by default-field
username kevin mz6JxJib/sQqvsw9 password encrypted privilege 0
username kevin attributes
VPN-group-policy Remote_Kevin
type tunnel-group Remote_Kevin remote access
attributes global-tunnel-group Remote_Kevin
address-pool
Group Policy - by default-Remote_Kevin
IPSec-attributes tunnel-group Remote_Kevin
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the icmp error
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:2bb1da52d1993eb9b13c2f6dc97c16cd
: end

Thank you

Hello

I read your message quickly through my cell phone. I don't know why you have spent your config twice. Maybe a typo issue.

I see the acl sheep in the wrong way. I mean 192.168.254 are your pool VPN and 192.168.1.0 your local LAN.

The acl must be:

sheep - in extended access-list permit ip 192.168.1.0 255.255.255.0 192.168.254.0 255.255.255.0

For nat (inside), you have 2 lines:

NAT (inside) 1 192.168.1.0 255.255.255.0 ==> it is redundant as the 1 below does the same thing with more networks if there is inside side. You can delete it.
NAT (inside) 1 0.0.0.0 0.0.0.0

Why are you doing this nat (outside)?

NAT (outside) 1 192.168.254.0 255.255.255.0

Here are the first questions that I have seen by reading through my mobile. Let's change this and let me know. I'll take a look later with a computer (tonight or tomorrow)

Thank you.

PS: Please do not forget to rate and score as good response if this solves your problem.

Cannot access internal network so AnyConnect SSL VPN, ASA 9.1 (6)

Hello Cisco community support,

I have a lab which consists of two virtual environments connected to a 3750-G switch that is connected to a 2901 router which is connected to an ASA 5512 - X which is connected to my ISP gateway. I configured SSL VPN using AnyConnect and can establish a VPN to the ASA from the outside but once connected, I can't access internal network resources or access the internet. My information network and ASA configuration is listed below. Thank you for any assistance you can offer.

ISP network gateway: 10.1.10.0/24

ASA to the router network: 10.1.40.0/30

Pool DHCP VPN: 10.1.30.0/24

Network of the range: 10.1.20.0/24

Development network: 10.1.10.0/24

: Saved
:
: Serial number: FCH18477CPT
: Material: ASA5512, 4096 MB RAM, CPU Clarkdale 2793 MHz, 1 CPU (2 cores)
:
ASA 6,0000 Version 1
!
hostname ctcndasa01
activate bcn1WtX5vuf3YzS3 encrypted password
names of
cnd-vpn-dhcp-pool 10.1.30.1 mask - 255.255.255.0 IP local pool 10.1.30.200
!
interface GigabitEthernet0/0
nameif inside
security-level 100
IP 10.1.40.1 255.255.255.252
!
interface GigabitEthernet0/1
nameif outside
security-level 0
address IP X.X.X.237 255.255.255.248
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
management only
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
!
boot system Disk0: / asa916-1-smp - k8.bin
boot system Disk0: / asa912-smp - k8.bin
passive FTP mode
permit same-security-traffic intra-interface
network of the NETWORK_OBJ_10.1.30.0_24 object
10.1.30.0 subnet 255.255.255.0
network obj_any object
network obj_10.1.40.0 object
10.1.40.0 subnet 255.255.255.0
network obj_10.1.30.0 object
10.1.30.0 subnet 255.255.255.0
outside_access_in list extended access permitted ip object NETWORK_OBJ_10.1.30.0_24 all
FREE access-list extended ip 10.1.40.0 NAT allow 255.255.255.0 10.1.30.0 255.255.255.0
access-list 101 extended allow any4 any4-answer icmp echo
access-list standard split allow 10.1.40.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
management of MTU 1500
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
ASDM image disk0: / asdm - 743.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) source obj_10.1.40.0 destination obj_10.1.40.0 static static obj_10.1.30.0 obj_10.1.30.0 non-proxy-arp-search to itinerary
NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.1.30.0_24 NETWORK_OBJ_10.1.30.0_24 non-proxy-arp-search to itinerary
Access-group outside_access_in in interface outside
!
Router eigrp 1
Network 10.1.10.0 255.255.255.0
Network 10.1.20.0 255.255.255.0
Network 10.1.30.0 255.255.255.0
Network 10.1.40.0 255.255.255.252
!
Route outside 0.0.0.0 0.0.0.0 10.1.10.1 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
without activating the user identity
identity of the user by default-domain LOCAL
Enable http server
http 192.168.1.0 255.255.255.0 management
http 192.168.1.0 255.255.255.0 inside
http X.X.X.238 255.255.255.255 outside
No snmp server location
No snmp Server contact
Crypto ipsec pmtu aging infinite - the security association
Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
registration auto
full domain name no
name of the object CN = 10.1.30.254, CN = ctcndasa01
ASDM_LAUNCHER key pair
Configure CRL
trustpool crypto ca policy
string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
certificate c902a155
308201cd 30820136 a0030201 020204c 0d06092a 864886f7 0d 010105 9 02a 15530
0500302b 31133011 06035504 03130 has 63 61736130 31311430 12060355 74636e64
0403130 31302e31 2e33302e 32353430 1e170d31 35303731 32303530 3133315a b
170d 3235 30373039 30353031 33315 has 30 2 b 311330 0403130a 11060355 6374636e
64617361 30313114 30120603 55040313 0b31302e 312e3330 2e323534 30819f30
0d06092a 864886f7 010101 05000381 8 d 0d 003081 89028181 00a47cfc 6b5f8b9e
9b106ad6 857ec34c 01028f71 d35fb7b5 6a61ea33 569fefca 3791657f eeee91f2
705ab2ea 09207c4f dfbbc18a 749b19ae d3ca8aa7 3370510b a5a96fd4 f9e06332
4355 db1a4b88 475f96a1 318f7031 40668a4d afa44384 819d fa164c05 2e586ccc
3ea59b78 5976f685 2abbdcf6 f3b448e5 30aa96a8 1ed4e178 0001300 020301 4 d d
06092a 86 01010505 00038181 0093656f 639e138e 90b69e66 b50190fc 4886f70d
42d9b4a8 11828da4 e0765d9c 52d84f8b 8e70747e e760de88 c43dc5eb 1808bd0f
fd2230c1 53f68ea1 00f3e956 97eb313e 26cc49d7 25b927b5 43d8d3fa f212fcaf
59eb8104 98e3a1d9 e05d3bcb 428cd7c6 61b530f5 fe193d15 ef8c7f08 37ad16f5
d8966b50 917a88bb f4f30d82 6f8b58ba 61
quit smoking
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
VPN-addr-assign local reuse / 360 time
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Trust ASDM_Launcher_Access_TrustPoint_0 vpnlb-ip SSL-point
SSL-trust outside ASDM_Launcher_Access_TrustPoint_0 point
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-linux-3.1.09013-k9.pkg 4
AnyConnect image disk0:/anyconnect-macosx-i386-3.1.09013-k9.pkg 5
AnyConnect image disk0:/anyconnect-win-3.1.09013-k9.pkg 6
AnyConnect enable
tunnel-group-list activate
internal GroupPolicy_cnd-vpn group policy
GroupPolicy_cnd-vpn group policy attributes
WINS server no
value of server DNS 8.8.8.8
client ssl-VPN-tunnel-Protocol
by default no
xxxx GCOh1bma8K1tKZHa username encrypted password
type tunnel-group cnd - vpn remote access
tunnel-group global cnd-vpn-attributes
address-cnd-vpn-dhcp-pool
strategy-group-by default GroupPolicy_cnd-vpn
tunnel-group cnd - vpn webvpn-attributes
activation of the alias group cnd - vpn
!
ICMP-class class-map
match default-inspection-traffic
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map icmp_policy
icmp category
inspect the icmp
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
service-policy icmp_policy outside interface
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:261228832f3b57983bcc2b4ed5a8a9d0
: end
ASDM image disk0: / asdm - 743.bin
don't allow no asdm history

Can you confirm that this is correct, your diagram shows your IP address public on ASA as 30 while you have assinged on 'outside' interface like 29?

ASA 5510 - cannot access or ping internal networks

Hello

I can't ping of an internal network (10.1.1.0/24) to another internal network (10.1.2.0/24 and 10.1.3.0/24 and so on).

The static route is in place and his works fine. I can ping these ASA network but not workstations.

The error I get on ASA is: refuse packet dropped due to the implicit access list.

Here is the configuration file:

:

ASA Version 8.0 (2)

!

host name asa

test.com domain name

activate the encrypted password of YLmDtv0bLkbX2VFy

names of

DNS-guard

!

interface Ethernet0/0

nameif outside

security-level 0

IP address 20x.20x.16.xxx 255.255.255.224

!

interface Ethernet0/1

Shutdown

No nameif

no level of security

no ip address

!

interface Ethernet0/2

nameif dmz

security-level 50

IP 172.16.0.254 255.255.255.0

!

interface Ethernet0/3

nameif inside

security-level 100

IP 10.1.1.2 255.255.255.0

!

interface Management0/0

nameif management

security-level 100

IP 172.16.200.1 255.255.255.248

management only

!

access-list acl_outside note allows outdoor ping (need to enable internal rule of ICMP n ° 3)

acl_outside list extended access permit icmp any one

acl_outside list extended access permit tcp any any eq idle ftp

acl_outside list extended access permit tcp any any object-group inactive DM_INLINE_TCP_1

Comment from inside_access_in-access list internal nodes access to the outside world (all ports)

inside_access_in list extended access allowed object-group TCPUDP any object-group everything

access-list inside_access_in note allows ping within the network to the external network (internet).

inside_access_in access list extended icmp permitted any any inactive echo

access-list inside_access_in note allow ping respond both ways - from the inside to the outside and

Note to inside_access_in list to access the outside inside (nat sound knots)

inside_access_in list extended access allow DM_INLINE_SERVICE_1 of object-group a

access-list extended sheep allowed ip 10.1.1.0 255.255.255.0 172.16.100.0 255.255.255.192

access-list sheep extended permits all ip 172.16.100.0 255.255.255.192

standard access list group1_splitTunnelAcl allow a

pager lines 24

Within 1500 MTU

management of MTU 1500

mask IP local VPN-pool 172.16.100.0 - 172.16.100.62 255.255.255.192

ICMP unreachable rate-limit 1 burst-size 1

ICMP allow all outside

ICMP allow any inside

ASDM image disk0: / asdm - 602.bin

don't allow no asdm history

ARP timeout 14400

Global 1 20x.20x.16.xxx (outside)

NAT (inside) 0 access-list sheep

NAT (inside) 1 0.0.0.0 0.0.0.0

Access-group acl_outside in interface outside

inside_access_in access to the interface inside group

Route outside 0.0.0.0 0.0.0.0 20x.20x.16.xxx 1

Route inside 10.1.2.0 255.255.255.0 10.1.1.248 1

Route inside 10.1.3.0 255.255.255.0 10.1.1.248 1

Route inside 10.1.4.0 255.255.255.0 10.1.1.248 1

Route inside 10.1.7.0 255.255.255.0 10.1.1.248 1

Route inside 10.1.9.0 255.255.255.0 10.1.1.248 1

Route inside 10.1.14.0 255.255.255.0 10.1.1.248 1

Route inside 10.1.15.0 255.255.255.0 10.1.1.247 1

Route inside 192.168.1.0 255.255.255.0 10.1.1.248 1

Route inside 192.168.20.0 255.255.255.240 10.1.1.248 1

Route inside 192.168.30.0 255.255.255.240 10.1.1.248 1

Route inside 192.168.40.0 255.255.255.240 10.1.1.248 1

Route inside 192.168.50.0 255.255.255.240 10.1.1.248 1

Route inside 192.168.70.0 255.255.255.240 10.1.1.248 1

Route inside 192.168.80.0 255.255.255.240 10.1.1.248 1

-------------------------------------

Any help or advice will be appreciated.

Thank you

You need two or three statements

permit same-security-traffic intra-interface

access-list sheep extended ip 10.1.2.0 allow 255.255.255.0 10.1.1.0 255.255.255.0

10.1.3.0 IP Access-list extended sheep 255.255.255.0 allow 10.1.1.0 255.255.255.0

10.1.4.0 IP Access-list extended sheep 255.255.255.0 allow 10.1.1.0 255.255.255.0

10.1.7.0 IP Access-list extended sheep 255.255.255.0 allow 10.1.1.0 255.255.255.0

10.1.9.0 IP Access-list extended sheep 255.255.255.0 allow 10.1.1.0 255.255.255.0

10.1.14.0 IP Access-list extended sheep 255.255.255.0 allow 10.1.1.0 255.255.255.0

and so on...

apply sheep except for inside the interface which you already have (inside) nat 0 access-list sheep

Concerning

Cisco ASA 8.4 (3) remote access VPN - client connects but cannot access inside the network

I have problems to access the resources within the network when connecting with the Cisco VPN client for a version of 8.4 (3) operation of the IOS Cisco ASA 5510. I tried all new NAT 8.4 orders but cannot access the network interior. I can see traffic in newspapers when ping. I can only assume I have NAT evil or it's because the inside interface of the ASA is on the 24th of the same subnet as the network interior? Please see config below, any suggestion would be appreciated. I configured a VPN site to another in this same 5510 and it works well

Thank you

interface Ethernet0/0

Speed 100

full duplex

nameif outside

security-level 0

IP x.x.x.x 255.255.255.240

!

interface Ethernet0/1

Speed 100

full duplex

nameif inside

security-level 100

IP 10.88.10.254 255.255.255.0

!

interface Management0/0

Shutdown

nameif management

security-level 0

no ip address

!

permit same-security-traffic inter-interface

permit same-security-traffic intra-interface

network of the PAT_to_Outside_ClassA object

10.88.0.0 subnet 255.255.0.0

network of the PAT_to_Outside_ClassB object

subnet 172.16.0.0 255.240.0.0

network of the PAT_to_Outside_ClassC object

Subnet 192.168.0.0 255.255.240.0

network of the LocalNetwork object

10.88.0.0 subnet 255.255.0.0

network of the RemoteNetwork1 object

Subnet 192.168.0.0 255.255.0.0

network of the RemoteNetwork2 object

172.16.10.0 subnet 255.255.255.0

network of the RemoteNetwork3 object

10.86.0.0 subnet 255.255.0.0

network of the RemoteNetwork4 object

10.250.1.0 subnet 255.255.255.0

network of the NatExempt object

10.88.10.0 subnet 255.255.255.0

the Site_to_SiteVPN1 object-group network

object-network 192.168.4.0 255.255.254.0

object-network 172.16.10.0 255.255.255.0

object-network 10.0.0.0 255.0.0.0

outside_access_in deny ip extended access list a whole

inside_access_in of access allowed any ip an extended list

11 extended access-list allow ip 10.250.1.0 255.255.255.0 any

outside_1_cryptomap to access extended list ip 10.88.0.0 255.255.0.0 allow object-group Site_to_SiteVPN1

mask 10.250.1.1 - 10.250.1.254 255.255.255.0 IP local pool Admin_Pool

NAT static NatExempt NatExempt of the source (indoor, outdoor)

NAT (inside, outside) static source any any static destination RemoteNetwork4 RemoteNetwork4-route search

NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork1 RemoteNetwork1

NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork2 RemoteNetwork2

NAT static LocalNetwork LocalNetwork destination (indoor, outdoor) static source RemoteNetwork3 RemoteNetwork3

NAT (inside, outside) static source LocalNetwork LocalNetwork static destination RemoteNetwork4 RemoteNetwork4-route search

!

network of the PAT_to_Outside_ClassA object

NAT dynamic interface (indoor, outdoor)

network of the PAT_to_Outside_ClassB object

NAT dynamic interface (indoor, outdoor)

network of the PAT_to_Outside_ClassC object

NAT dynamic interface (indoor, outdoor)

Access-group outside_access_in in interface outside

inside_access_in access to the interface inside group

Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

dynamic-access-policy-registration DfltAccessPolicy

Sysopt connection timewait

Service resetoutside

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec transform-set esp-ikev1 esp-md5-hmac bh-series

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

Crypto-map dynamic dynmap 10 set pfs

Crypto-map dynamic dynmap 10 set transform-set bh - set ikev1

life together - the association of security crypto dynamic-map dynmap 10 28800 seconds

Crypto-map dynamic dynmap 10 kilobytes of life together - the association of safety 4608000

Crypto-map dynamic dynmap 10 the value reverse-road

card crypto mymap 1 match address outside_1_cryptomap

card crypto mymap 1 set counterpart x.x.x.x

card crypto mymap 1 set transform-set ESP-AES-256-SHA ikev1

card crypto mymap 86400 seconds, 1 lifetime of security association set

map mymap 1 set security-association life crypto kilobytes 4608000

map mymap 100-isakmp ipsec crypto dynamic dynmap

mymap outside crypto map interface

crypto isakmp identity address

Crypto isakmp nat-traversal 30

Crypto ikev1 allow outside

IKEv1 crypto ipsec-over-tcp port 10000

IKEv1 crypto policy 5

preshared authentication

3des encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 10

preshared authentication

3des encryption

sha hash

Group 1

life 86400

IKEv1 crypto policy 50

preshared authentication

the Encryption

md5 hash

Group 2

life 86400

IKEv1 crypto policy 60

preshared authentication

aes-256 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 70

preshared authentication

aes-256 encryption

sha hash

Group 1

life 86400

IKEv1 crypto policy 90

preshared authentication

aes encryption

sha hash

Group 2

life 86400

Telnet timeout 5

Console timeout 0

management-access inside

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

internal BACKDOORVPN group policy

BACKDOORVPN group policy attributes

value of VPN-filter 11

Ikev1 VPN-tunnel-Protocol

Split-tunnel-policy tunnelall

BH.UK value by default-field

type tunnel-group BACKDOORVPN remote access

attributes global-tunnel-group BACKDOORVPN

address pool Admin_Pool

Group Policy - by default-BACKDOORVPN

IPSec-attributes tunnel-group BACKDOORVPN

IKEv1 pre-shared-key *.

tunnel-group x.x.x.x type ipsec-l2l

tunnel-group ipsec-attributes x.x.x.x

IKEv1 pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

Review the ip options

!

global service-policy global_policy

Excellent.

Evaluate the useful ticket.

Thank you

Rizwan James

ASA 5505 VPN cannot access inside the host

I have access remote VPN configuration on an ASA 5505, but cannot access the host or the AAS when I connect through the VPN. I can connect with the Cisco VPN client and the VPN is on on the SAA and it shows that I am connected. I have the correct Ip address, but I can't ping or you connect to one of the internal addresses. I can't find what I'm missing. I have the VPN without going through the ACL interface. Because I can connect but not going anywhere I'm sure I missed something.

framework for configuration below

interface Vlan1

nameif inside

security-level 100

10.1.1.1 IP address 255.255.255.0

IP local pool xxxx 10.1.1.50 - 10.1.1.55 mask 255.255.255.0

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto-map dynamic outside_dyn_map 20 set pfs

Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

PFS set 40 crypto dynamic-map outside_dyn_map

Crypto-map dynamic outside_dyn_map 40 value transform-set ESP-3DES-SHA

Crypto-map dynamic inside_dyn_map 20 set pfs

Crypto-map dynamic inside_dyn_map 20 the value transform-set ESP-3DES-SHA

map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

outside_map interface card crypto outside

map inside_map 65535-isakmp ipsec crypto dynamic inside_dyn_map

inside crypto map inside_map interface

crypto ISAKMP allow inside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

global service-policy global_policy

XXXXXXX strategy of Group internal

attributes of the strategy group xxxxxxx

banner value xxxxx Site Recovery

WINS server no

24.xxx.xxx.xx value of DNS server

VPN-access-hour no

VPN - connections 3

VPN-idle-timeout 30

VPN-session-timeout no

VPN-filter no

Protocol-tunnel-VPN IPSec

Split-tunnel-policy tunnelall

by default no

disable secure authentication unit

disable authentication of the user

user-authentication-idle-timeout no

disable the IP-phone-bypass

disable the leap-bypass

disable the NEM

disable the NAC

NAC-sq-period 300

NAC-reval-period 36000

NAC-by default-acl no

the address value xxxxxx pools

enable Smartcard-Removal-disconnect

the firewall client no

WebVPN

url-entry functions

Free VPN of CNA no

No vpn-addr-assign aaa

No dhcp vpn-addr-assign

tunnel-group xxxx type ipsec-ra

tunnel-group xxxx general attributes

xxxx address pool

Group Policy - by default-xxxx

blountdr group of tunnel ipsec-attributes

pre-shared-key *.

Missing nat exemption for vpn clients. Add the following and you should be good to go.

inside_nat0_outbound list of allowed ip extended access any 192.168.10.0 255.255.255.0

NAT (inside) 0-list of access inside_nat0_outbound

Cannot access remote network by VPN Site to Site ASA

Hello everyone

First of all I must say that I have configured the VPN site-to site a million times before. Stuck with it. First of all I can't ping outside the interface of my ASA remote. Secondly, VPN is in place, but no connectivity between local networks

ASA local:
hostname gyd - asa
domain bct.az
activate the encrypted password of XeY1QWHKPK75Y48j
XeY1QWHKPK75Y48j encrypted passwd
names of
DNS-guard
!
interface GigabitEthernet0/0
Shutdown
nameif vpnswc
security-level 0
IP 10.254.17.41 255.255.255.248
!
interface GigabitEthernet0/1
Vpn-turan-Baku description
nameif outside Baku
security-level 0
IP 10.254.17.9 255.255.255.248
!
interface GigabitEthernet0/2
Vpn-ganja description
nameif outside-Ganja
security-level 0
IP 10.254.17.17 255.255.255.248
!
interface GigabitEthernet0/2.30
Description remote access
VLAN 30
nameif remote access
security-level 0
IP 85.*. *. * 255.255.255.0
!
interface GigabitEthernet0/3
Description BCT_Inside
nameif inside-Bct
security-level 100
IP 10.40.50.65 255.255.255.252
!
interface Management0/0
nameif management
security-level 100
IP 192.168.251.1 255.255.255.0
management only
!
boot system Disk0: / asa823 - k8.bin
passive FTP mode
DNS server-group DefaultDNS
name-server 192.168.1.3
domain bct.az
permit same-security-traffic intra-interface
object-group network obj - 192.168.121.0
object-group network obj - 10.40.60.0
object-group network obj - 10.40.50.0
object-group network obj - 192.168.0.0
object-group network obj - 172.26.0.0
object-group network obj - 10.254.17.0
object-group network obj - 192.168.122.0
object-group service obj-tcp-eq-22
object-group network obj - 10.254.17.18
object-group network obj - 10.254.17.10
object-group network obj - 10.254.17.26
access-list 110 scope ip allow a whole
NAT list extended access permit tcp any host 10.254.17.10 eq ssh
NAT list extended access permit tcp any host 10.254.17.26 eq ssh
access-list extended ip allowed any one sheep
icmp_inside list extended access permit icmp any one
icmp_inside of access allowed any ip an extended list
access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh
RDP list extended access permit tcp any host 192.168.45.3 eq 3389
rdp extended permitted any one ip access list
sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0
NAT-vpn-internet access-list extended ip 192.168.121.0 allow 255.255.255.0 any
NAT-vpn-internet access-list extended ip 172.26.0.0 allow 255.255.255.0 any
NAT-vpn-internet access-list extended ip 192.168.122.0 allow 255.255.255.0 any
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.40.60.0 255.255.255.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.40.50.0 255.255.255.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 192.168.0.0 255.255.0.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 172.26.0.0 255.255.255.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.254.17.0 255.255.255.0
GHC-ganja-internet access-list extended ip 192.168.45.0 allow 255.255.255.0 any
Standard access list Split_Tunnel_List allow 192.168.16.0 255.255.255.0
azans 192.168.69.0 ip extended access-list allow 255.255.255.0 any
permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.121.0 255.255.255.0
permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.80.0 255.255.255.0
pager lines 24
Enable logging
emblem of logging
recording of debug console
recording of debug trap
asdm of logging of information
Interior-Bct 192.168.1.27 host connection
flow-export destination inside-Bct 192.168.1.27 9996
vpnswc MTU 1500
outside Baku MTU 1500
outside-Ganja MTU 1500
MTU 1500 remote access
Interior-Bct MTU 1500
management of MTU 1500
IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0
IP local pool ssl 192.168.121.130 - 192.168.121.200 mask 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any outside Baku
ICMP allow access remotely
ICMP allow any interior-Bct
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
global (outside-Baku) 1 interface
global (outside-Ganja) interface 2
3 overall (RAS) interface
azans access-list NAT 3 (outside-Ganja)
NAT (remote access) 0 access-list sheep-vpn-city
NAT 3 list nat-vpn-internet access (remote access)
NAT (inside-Bct) 0-list of access inside_nat0_outbound
NAT (inside-Bct) 2-nat-ganja access list
NAT (inside-Bct) 1 access list nat
Access-group rdp on interface outside-Ganja
!
Router eigrp 2008
No Auto-resume
neighbor 10.254.17.10 interface outside Baku
neighbor 10.40.50.66 Interior-Bct interface
Network 10.40.50.64 255.255.255.252
Network 10.250.25.0 255.255.255.0
Network 10.254.17.8 255.255.255.248
Network 10.254.17.16 255.255.255.248
redistribute static
!
Access remote 0.0.0.0 0.0.0.0 85.*. *. * 1
Outside-Baku route 10.0.11.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 10.0.33.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 10.0.150.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 10.0.170.0 255.255.255.0 10.254.17.10 1
Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1
Route outside Baku 10.254.17.32 255.255.255.248 10.254.17.10 1
Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 192.168.27.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1
Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1
Route outside-Ganja 192.168.66.0 255.255.255.0 10.254.17.18 1
Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1
Outside-Baku route 192.168.80.0 255.255.255.0 10.254.17.11 1
Access remote 192.168.121.0 255.255.255.0 85.132.43.1 1
Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1
Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1
Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1
Route inside-Bct 192.168.254.0 255.255.255.0 10.40.50.66 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol Ganymede GANYMEDE +.
AAA-server GANYMEDE (Interior-Bct) 192.168.1.8
key *.
AAA-server GANYMEDE (Interior-Bct) 192.168.22.46
key *.
RADIUS protocol AAA-server TACACS1
AAA-server TACACS1 (Interior-Bct) host 192.168.1.8
key *.
AAA-server TACACS1 (Interior-Bct) host 192.168.22.46
key *.
authentication AAA ssh console LOCAL GANYMEDE
Console to enable AAA authentication RADIUS LOCAL
Console Telnet AAA authentication RADIUS LOCAL
AAA accounting ssh console GANYMEDE
Console Telnet accounting AAA GANYMEDE
Enable http server
http 192.168.1.0 255.255.255.0 management
http 192.168.1.0 255.255.255.0 Interior-Bct
http 192.168.139.0 255.255.255.0 Interior-Bct
http 192.168.0.0 255.255.255.0 Interior-Bct
Survey community SNMP-server host inside-Bct 192.168.1.27
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto ipsec transform-set newset aes - esp esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac myset2
Crypto ipsec transform-set esp-3des esp-md5-hmac raccess
Crypto ipsec transform-set esp-3des esp-sha-hmac vpnclienttrans
Crypto ipsec transform-set vpnclienttrans transport mode
life crypto ipsec security association seconds 2147483646
Crypto ipsec kilobytes of life security-association 2147483646
raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map
correspondence address card crypto mymap 10 110
card crypto mymap 10 peers set 10.254.17.10
card crypto mymap 10 transform-set RIGHT
correspondence address card crypto mymap 20 110
card crypto mymap 20 peers set 10.254.17.11
mymap 20 transform-set myset2 crypto card
card crypto mymap interface outside Baku
correspondence address card crypto ganja 10 110
10 ganja crypto map peer set 10.254.17.18
card crypto ganja 10 transform-set RIGHT
card crypto interface outside-Ganja ganja
correspondence address card crypto vpntest 20 110
peer set card crypto vpntest 20 10.250.25.1
newset vpntest 20 transform-set card crypto
card crypto vpntest interface vpnswc
vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1
card crypto interface for remote access vpnclientmap
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = gyd - asa .az .bct
sslvpnkeypair key pair
Configure CRL
map of crypto DefaultCertificateMap 10 ca certificate

crypto isakmp identity address
ISAKMP crypto enable vpnswc
ISAKMP crypto enable outside-Baku
ISAKMP crypto enable outside-Ganja
crypto ISAKMP enable remote access
ISAKMP crypto enable Interior-Bct
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Crypto isakmp nat-traversal 30
No vpn-addr-assign aaa
Telnet timeout 5
SSH 192.168.0.0 255.255.255.0 Interior-Bct
SSH timeout 35
Console timeout 0
priority queue outside Baku
queue-limit 2046
TX-ring-limit 254
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Server NTP 192.168.1.3
SSL encryption, 3des-sha1 rc4 - md5 aes128-sha1 sha1-aes256
SSL-trust point ASDM_TrustPoint0 to vpnlb-ip remote access
SSL-trust ASDM_TrustPoint0 remote access point
WebVPN
turn on remote access
SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image
enable SVC
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
internal group ssl policy
attributes of group ssl policy
banner welcome to SW value
value of DNS-server 192.168.1.3
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
group-lock value SSL
WebVPN
value of the SPS URL-list
internal vpn group policy
attributes of vpn group policy
value of DNS-server 192.168.1.3
Protocol-tunnel-VPN IPSec l2tp ipsec
disable the PFS
BCT.AZ value by default-field
ssl VPN-group-strategy
WebVPN
value of the SPS URL-list
IPSec-attributes tunnel-group DefaultL2LGroup
ISAKMP retry threshold 20 keepalive 5
attributes global-tunnel-group DefaultRAGroup
raccess address pool
Group-RADIUS authentication server
Group Policy - by default-vpn
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
IPSec-attributes tunnel-group DefaultWEBVPNGroup
ISAKMP retry threshold 20 keepalive 5
tunnel-group 10.254.17.10 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.10
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
type SSL tunnel-group remote access
attributes global-group-tunnel SSL
ssl address pool
Authentication (remote access) LOCAL servers group
Group Policy - by default-ssl
certificate-use-set-name username
Group-tunnel SSL webvpn-attributes
enable SSL group-alias
Group-url https://85. *. *. * / activate
tunnel-group 10.254.17.18 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.18
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
tunnel-group 10.254.17.11 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.11
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
type tunnel-group DefaultSWITGroup remote access
attributes global-tunnel-group DefaultSWITGroup
raccess address pool
Group-RADIUS authentication server
Group Policy - by default-vpn
IPSec-attributes tunnel-group DefaultSWITGroup
pre-shared key *.
!
type of policy-card inspect dns migrated_dns_map_1
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect sunrpc
inspect xdmcp
inspect the netbios
Review the ip options
class flow_export_cl
flow-export-type of event all the destination 192.168.1.27
class class by default
flow-export-type of event all the destination 192.168.1.27
Policy-map Voicepolicy
class voice
priority
The class data
police release 80000000
!
global service-policy global_policy
service-policy interface outside Baku Voicepolicy
context of prompt hostname

Cryptochecksum:4f35f975ba7a0c11f7f46dfd541d266f
: end
GYD - asa #.

ASA remote:
ASA Version 8.2 (3)
!
ciscoasa hostname
activate the encrypted password of XeY1QWHKPK75Y48j
2KFQnbNIdI.2KYOU encrypted passwd
names of
DNS-guard
!
interface Ethernet0/0
nameif inside
security-level 100
IP 192.168.80.14 255.255.255.0
!
interface Ethernet0/1
nameif outside
security-level 0
IP 10.254.17.11 255.255.255.248
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
nameif management
security-level 100
no ip address
management only
!
boot system Disk0: / asa823 - k8.bin
passive FTP mode
access-list 110 scope ip allow a whole
192.168.80.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.0.0 255.255.0.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
management of MTU 1500
Within 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow all outside
ICMP allow any inside
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside) 0 access-list sheep
Route outside 0.0.0.0 0.0.0.0 10.254.17.9 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.1.0 255.255.255.0 management
http 192.168.80.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto ipsec transform-set newset aes - esp esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac myset2
life crypto ipsec security association seconds 2147483646
Crypto ipsec kilobytes of life security-association 2147483646
correspondence address card crypto mymap 10 110
card crypto mymap 10 peers set 10.254.17.9
mymap 10 transform-set myset2 crypto card
mymap outside crypto map interface
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN

tunnel-group 10.254.17.9 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.9
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns migrated_dns_map_1
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname

Cryptochecksum:1c1ac60e2fb84f65269d15d53f27c21b
: end
ciscoasa # $

Still, I can't ping ASA remote outside from outside of the Local interface. And there is no connectivity between the 192.168.80.0 distance and local don't say 192.168.1.0. I have run out of ideas

Would appreciate any help. Thank you in advance...

If the tunnel is up (phase 1), but no traffic passing the best test is the following:

Add order management-access to the Interior , and then try to PING the intellectual property inside ASA counterpart.

inside x.x.x.x ping --> x.x.x.x is the IP of the ASA peer inside

The test above shows if the traffic passes through the tunnel (check encrypted/decrypted packets of sh cry ips its).

Test on both directions.

Please post the results.

Federico.

Cannot access my Comcast mail since the last update. I can access it from Safari and Microsoft Windows, but generally do not either of these browsers use

Cannot access my Comcast mail since the last update. I can access it from Safari and Microsoft Windows, but generally do not use either of these browsers. I chatted with Comcast and they are the ones who asked me to try to gain access to other browsers. And, as noted, I managed. Only my opening my email to Comcast.net inhibits the Firefox, the browser that I use on a regular basis because of this problem I can't use Firefox.

The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions, open Web sites and preferences.

To reset Firefox, perform the following steps:
1. Go to Firefox > help > troubleshooting information.
2. Click on the button 'Reset Firefox'.
3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
4. Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

This solve your problems? Please report to us!

Cannot access my laptop from my desktop PC on the network

I have a desktop running Windows 7 and a laptop running Vista, and they are both on a wireless network. My laptop can access my desktop, but my office is unable to access my laptop. On the desktop, my laptop is visible, but clicking on it causes the following network error "Windows cannot access \\DR-NOTEBOOK.

Run the Diagnostics on the dialog box results in the following message: 'file and print sharing resources (DR-NOTEBOOK) is online but does not respond to connection attempts. I have gone through several web sites and support sites, but can't seem to find an answer ot fix the problem. I do not use any third-party firewall, only (on both PC) Windows Firewall.

In network and sharing on the laptop Center, I have all the elements (i.e. the network discovery, file sharing,...), put into service.

I would appreciate help from anyone. Thnak.s

I finally managed to fix the problem. The link above was helpful, but I had already taken care of everything mentioned. The link isn't really remedy the situation where you have a laptop that is connected wirelessly to the network, as is my case. My problem is that the desktop PC could not access files/folders on my laptop, but it worked very well the opposite effect (i.e. the laptop could access files/folders on the desktop. After 'playing well' on the laptop, that's what I did to solve my problem:

In Center of network & share on the laptop, there is a list with my network connection wireless, with a link "view state".

Click on this link and you get a dialog box with a button 'properties '. By clicking on this, you get one of several elements that may or may not be selected. In my case, the "file and printer sharing for Microsoft networks" was NOT selected. I chose this and hey presto, it worked.

Hope that this is useful for someone else with the same problem.

Cannot access the Web server in the DMZ from the inside using IP global

Hi all

I hope it's a very simple question.

I'm running a PIX 515 firewall v6.3. I set up a Web server in my DMZ and use static NAT for re-branded it overall static IP address. Access from the outside of the demilitarized zone works remarkably well. I can access inside the interface Web site using the internal IP, but I can't access it from inside interface using the global IP are entrusted to him.

Is there a particular reason why this would not be allowed? My feeling was that the request would be forwarded via the external interface (as it is a global IP address) and then be bounced back by my sense of the ISP the request would come to the new external interface (as the static NAT is applied to the external interface).

However if I try and access the global IP from my inside interface, then the browser can not find the server.

can someone explain why this is so? Any information would be appreciated.

see you soon,

Wayne

---------------------------------

6.3 (3) version PIX

interface ethernet0 100full

interface ethernet1 100full

interface ethernet2 100full

ethernet0 nameif outside security0

nameif ethernet1 inside the security100

nameif dmz security50 ethernet2

hostname helmsdeep

domain p2h.com.sg

fixup protocol dns-length maximum 512

fixup protocol ftp 21

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

fixup protocol http 80

fixup protocol they 389

no correction protocol rsh 514

fixup protocol rtsp 554

fixup protocol sip 5060

fixup protocol sip udp 5060

fixup protocol 2000 skinny

fixup protocol smtp 25

No fixup protocol sqlnet 1521

fixup protocol tftp 69

names of

acl_out list access permit tcp any host 203.169.113.110 eq www

access-list 90 allow the host tcp 10.1.1.27 all

pager lines 24

debug logging in buffered memory

Outside 1500 MTU

Within 1500 MTU

MTU 1500 dmz

IP address outside pppoe setroute

IP address inside 192.168.1.1 255.255.255.0

dmz 10.1.1.1 IP address 255.255.255.0

no failover

failover timeout 0:00:00

failover poll 15

No IP failover outdoors

No IP failover inside

no failover ip address dmz

location of PDM 202.164.169.42 255.255.255.255 inside

location of PDM 202.164.169.42 255.255.255.255 dmz

location of PDM 10.1.1.26 255.255.255.255 dmz

location of PDM 10.1.1.26 255.255.255.255 outside

location of PDM 172.16.16.20 255.255.255.255 outside

location of PDM 192.168.1.222 255.255.255.255 inside

history of PDM activate

ARP timeout 14400

Global 1 interface (outside)

Global (dmz) 1 10.1.1.101 - 10.1.1.125

NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

NAT (dmz) 0-list of access 90

NAT (dmz) 1 0.0.0.0 0.0.0.0 0 0

static (dmz, external) 203.169.113.110 10.1.1.27 netmask 255.255.255.255 0 0

Access-group acl_out in interface outside

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

Timeout, uauth 0:05:00 absolute

GANYMEDE + Protocol Ganymede + AAA-server

RADIUS Protocol RADIUS AAA server

AAA-server local LOCAL Protocol

Enable http server

http 192.168.1.222 255.255.255.255 inside

enable floodguard

string fragment 1

Console timeout 0

Terminal width 80

Code v6 pix or less don't let you have traffic "back" or return flow via the same interface on which it was sent. Having also your bounce back off of an external server traffic is never a good idea, because you won't be able to distinguish which and rogue attacks by spoofing someone outside your network.

Since you are using pix 6.3 code, you may be able to outside the NAT. Add this static to your config:

static (dmz, upside down) 203.169.113.110 10.1.1.27 netmask 255.255.255.255 0 0

You may need to run a clear xlate after adding the new static statement. Note that the interfaces: it's demilitarized zone, inside inside, dmz.

I would like to know if it works.

I can't access my files on my VM W7 (full XP Pro OS not XP Mode) and cannot access the W7 files from a remote computer (XP Pro).

I cannot access files W7 Pro both a remote computer (XP Pro) and a virtual machine (XP Pro not XP Mode) on my network. I see the folders but it says that I have no rights. I can access of W7 but not vice versa. In XP mode, I can access the file from W7. What is going on?

Dennis

Hello

For assistance on this issue, you can ask your question in the link below.

Windows 7 IT Pro

http://social.technet.Microsoft.com/forums/en/category/w7itpro

Cannot access ASA from outside

Similar Questions

Maybe you are looking for