Cannot access my profile of owner/Admin
Hi all
I'm new to this website and you are my last hope. I am currently running Windows 7 and I had no problems before. Earlier today, I was using my laptop and everything was fine. I yelled and had to leave for a few minutes, so I decided to put my laptop in mode "Eve". When I got home I have it turned back and entered my password and it says "Username or password incorrect" which was strange, after a few other attempts without success. I turned off my laptop, when I did he started to update. Now I'm unable to access my profile which sucks because it was the owner/admin account. When I try to restore to a previous time on another account, I am unable to reason because it requires the admin password.
So, if anyone knows how to fix this please let me know!
Thank you
Jake
Now I'm unable to access my profile which sucks because it was the owner/admin account. When I try to restore to a previous time on another account, I am unable to reason because it requires the admin password.
Here you go:
- Set your BIOS so that it uses the DVD drive as its primary boot device.
- Start the computer with your system repair CD. If you do not have one, ask a friend to burn you through the control panel / backup and restore. It takes less than five minutes.
- Press a key when prompted to boot from the CD.
- Select 'PC Repair' in the menu.
- Select 'Repair' when prompted.
- When you are prompted, select System Restore. You will not have a password.
- Configure Windows to a point before this problem occurred.
- Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.
Tags: Windows
Similar Questions
-
I get the error messages form I mesh and cannot access my profile or friends list '
MIicrosoft online which is a whoosie of my gave me element to modify registry keys but no items exist in the regisry
For iMesh, you can go here...
http://www.iMesh.com/community.html
I don't understand the other two problems that you encounter. If you please would explain what they are and what, if any, error messages that you receive. Also, what antivirus do you use, and you run Windows XP SP3?
--
Gina Whipp
Microsoft MVP (access)Please post all responses on the forum where everyone can enjoy.
-
I can't connect to my profile, apparently because of a problem with Windows Installer. It starts to open a session and when I try to access my documents I get a message unable to access my profile and if I'm logged a temporary profile: "Details: access to refusedowever, everything seems to be there, except for my usual wallpaper and I can access my files." In the msconfig Services tab, Windows Installer shows as stopped. I tried to reinstall, but it won't download because of the error of windows install. The keyboard started to do fun things like key assignment got confused. My admin profile works except for the Windows Installer problem which stops remove me or update Java. I checked for malware and viruses (no) run "sfc/scannow" ad "chkdsk /f. All system restore points are missing. If I can access my files, the system asks me my first and last name and initials prior to providing access. I have now the temp profile open in safe mode and note that a file that I saved when you previously logged into the temp profile has been saved successfully to the new folder that I created. In addition, when you are connected to normal mode, I found that I couldn't access to Mozilla Firefox, open MS Internet Explorer and click on a link to something (can't remember what) and Mozilla Firefox open as usual.
Things that I did just before this problem appeared: installed and run Malwarebytes and Superantispyware, tried to update Java and VLM Media Player using AVAST! interface, and then without using AVAST! interface. Both failed, but something else I've updated OK. Tried to download and install Windows Installer 4.5 (without success). So I then tried to repair/reinstall command of the race by using regedit and regserver command screen.
I wonder whether to follow the instructions in http://support.microsoft.com/kb/322756. However, as it asks me to back up the registry before you edit it. As all my previous restore points disappeared, I don't trust to back up the registry. How can I back up the registry of my external hard drive?
You have a damaged or corrupted user profile. A way to recover from this condition is to perform a system restore, but since you have no restore points, you will need to recover with another method. The usual way to recover is to create a new user profile and then copy the data from the damaged to the new profile user profile. This procedure is not usually difficult. Choose from the selection below:
"How to recover damaged Windows XP user profile"
<>http://support.Microsoft.com/kb/555473 >
"How to copy a user profile data damaged to a new stars in Windows XP"
<>http://support.Microsoft.com/kb/811151 >
Almost always, corruption of the profiles is accompanied, otherwise caused corruption in the file system. At an ideal time, it is strongly recommended to perform a 'chkdsk' operation with the "/ R" or "Repair" option. Note that this operation will take place at the next reboot before Windows loading completely, cannot be interrupted and can take more than a few hours depending on the size/speed of hard disk and the number of errors found... Sometimes, this in-and-of-itself can solve the problem.
"How to perform Disk error in Windows XP check"
<>http://support.Microsoft.com/kb/315265 >
To answer your question on the backup of your registry - try the freeware "C:\WINDOWS\ERUNT" to create a backup. It has been used and recommended in this forum for years.
C:\WINDOWS\ERUNT: <> http://www.larshederer.homepage.t-online.de/erunt/ >
HTH,
JW
-
Cannot access the profile of Thunderbird in Windows 7 Manager
I followed the instructions in support. Mozilla to access the profile of Thunderbird in Windows 7 Manager. But I can't access Thunderbird Profile Manager. I tried different ways to search for thunderbird.exe - P, but Windows 7 won't cough upward Thunderbird Profile Manager - it starts just the program Thunderbird. Any suggestions?
Press the Windows (between Ctrl and Alt) and R and type this into the box:
Thunderbird.exe Pei
and then click OK.
-
Cannot access the Web site through admin 'Not found' error message
I just transferred my game - pup.com with www and non www domain name
The two of us, I changed the names of DNS server for ns1.worldsecuresystems.com & ns2.worldsecuresystems.com through my old Web host
My site is also on the paid plan, so what did I miss?
My site is still up and running that I just can't access it when you try to connect, I get this error message
Not found
The requested URL /Admin/Index2.aspx was not found on this server.
Hi Michelle,
I checked your domain, it works, when you update the DNS it normally takes some time to update.
Please try to reset your browser or use a different browser
Thank you
Prabhakar Kumar
-
Upgrade to version 35, cannot access my profile on another disk
Hi people. I tried to understand this for 3 weeks without success. I hope that there is someone out there who can help you.
My Firefox is on D:, but I have my profile on E: (I like it like that for reasons which are not important). Everything worked fine until I upgraded to version 35 (of 32). When the upgrade, version 35 sets the folder from my profile on the D: drive, but I need for Firefox point to drive E: where in fact. I read on how to move the profile folder, but can't make it work for me, for some reason any. Does anyone have a simple solution? Thank you.
See also:
-
When you try to access the user profile, get the error message "the service user profile Service has no logon. User profile cannot be loaded. "The new profile tried to go through the steps of profile user fix damaged by ms, but trying to create a new user profile to copy the files from the damaged user profile does not display on my C: drive the users folder (as it should). Anyway to fix the corrupted if user profile profile are available?
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
-
Cannot access Firefox shows the missing profile or inaccessible is there an easy solution?
cannot access Firefox shows the missing profile or unreachable is there a solution I'm not a computer expert
Hello d2burnett, tryp press windows key + R and open %appdata%\Mozilla\Firefox\ - then rename the file called profiles.ini to something like oldprofiles.ini...
-
Cannot access Admin page, nor showing in Explorer after update to Firmware #26923836
Hi, I just upgraded to 6.4.2 to 6.5.0
Before I reboot:
Cannot access admin page, became a loading bar with the NetGear logo, to receive a connection error message.
I could see my SIN in Solution Explorer and browse the files.
I rebooted and now it is happening:
I get the connection error when tring to access the admin page. -Failure error as if he had nothing to this address. Same thing when I use the IP address.
I ping the Ip and get an immediate response.
I found some indications that I should be able to connect in SSH with putty, but it does not work for me.
The LCD display indicating the right host name and version. I also got a message for the encryption to the startup key.
Don't know what I can do at this point...
We have tried to reinstall OS and nothing has changed.
We have tried to unplug an ethernet, nothing has changed.
The question has been reassigned to lvl 3. They came into tech mode.
They discover that one of my 2 hard drives is a not synchronize properly and some corrupted system files. Simply, I removed the HDD and restarted normally. Everything was fine.
I put the HARD drive bad and resynchronization.
hope this helps someone else.
PS, The Netgear Customer Service is good and fast - recommended!
-
Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
Lack the profile can not access the Profile Manager, cannot be continued
Yahoo somehow accessed and changed the settings of my browsers safari and firefox, could not change the settings for search engine default for more than a minute, even remove engine from yahoo wouldn't last a minute, so I deleted firefox, re-uploaded, now my profile is missing...
I can not access the Profile Manager via the Terminal, I can't do anything, Firefox is not operational at this time and I don't know how to fix it.
In Mac OS X v10.7 and later versions, the ~/Library folder is a hidden folder.
- http://KB.mozillazine.org/Show_hidden_files_and_folders#Mac_os_x
- http://KB.mozillazine.org/Profile_folder_-_Firefox#Mac
- < User > /users//Library/Application Support/Firefox/profiles.ini
See also:
-
due to corrupt files, I had to reinstall windows 8.1. before you reinstall, I saved my thunderbird profile, I have now to restore this profile but can't find how to access the Profile Manager, can anyone help please? I downloaded Thunderbird 17.0.8
Press the Windows key and R, then type thunderbird.exe Pei
http://KB.mozillazine.org/Moving_your_profile_folder_-_Thunderbird
-
I have a treatment of strange problem with part of 2012 R2. We have a lab with 30 workstations Windows 7 Enterprise. They all have the same office via a redirection of folder GPO applied to a share on the server of 2012 R2 mentioned above. All but 4 of them can connect and pull on the desktop the appropriate shortcuts, network folders, etc.
The share permissions so no denies explicit. In an effort to solve this problem, I added everyone and authenticated users, with read permissions on top of the appropriate ad group object that already had read permissions and, of course, SYSTEM and with full control Domain Admins. NTFS permissions have, of course, CREATOR OWNER, SYSTEM and with full control Domain Admins. Also, the appropriate ad group has read permissions. No NTFS clear or rejects the request.
Using the same account that belongs to the appropriate group or my domain administrator account (which has no office redirected) I can connect to all the workstations and all, but the four mentioned above get the redirected folder desktop. When I authenticate my account with DA and try to connect to the share on these four computers I get the same error to the user:
Network error
Windows cannot access \\SERVER\Share$
You are not allowed to access \\SERVER\Share$. Contact your network administrator to request access.
I think we've all seen this error before. But I only saw him associated with NTFS permission issues or sharing. Frankly I'm perplexed. Any ideas on what's going on?
Edited to add: I don't think it's a problem with sharing. Clearly, it's a matter of workstation since 26 of 30 machines Win 7 can be connected without difficulty. And I don't think it's a matter of profile either since I've never authenticated on these workstations with my domain account.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it -
My computer, I cannot access my account even though I have the password.
I have problems with my user account on my laptop Inspiron 1525 Windows Vista. Although I tried to type my password to access my account, it keeps giving me a message. The message reads: "the user profile Service service has no logon. User profile cannot be loaded. "I appreciate all the comments and solutions to this problem of mine. Please and thank you s!
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Profile of user admin fails to connect
About a week ago I tried to load a software and it does not accept the Vista admin password. I then tried to log on to the admin account and received the message "user profile service failed logn. User profile cannot be loaded. "An OK box will appear and if you click it you go back into the account login window select. If I enter the old password or another password, it gives a wrong password message. Can any ideas on how I get it back? Or I have to reload and reconfigure accounts?
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.
Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been logged on with
a temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
Impossible to install the audio driver for Vista for Satellite M100-152
Hi people, I have a problem with installing the audio driver for my M100 - 152 (PSMA1E). I downloaded the driver and tried to install it. At one point during the installation progress, sometimes an error message that says: "Setup does not match infFi
-
Manual or how to use the ExpressCard Remote control Mobile HP Media Center
My HP Pavilion dv7-1448dx-product # NV213UA #ABA.I'm running Win 7 Ultimate x 64 OEM. I searched HP and found 1 photo of my card ExpressCard Mobile HP Media Center remote control, I found all the descriptions of component and everything BUT how to us
-
Win 7 key incomplete Product Code
My laptop (Fujitsu Lifebook AH530) won't start. I can't access any sealing recovery so reluctantly seeks to do a fresh install of Win 7. The laptop came preloaded without a full disc and I think I'll need to create a new Win 7 CD... purpose the key c
-
I followed the updated documentation of my DevAlpha to 10.0.9 on Windows successfully. How ever, I can not connect to my Mac for development. I can't connect my device to Desktop on Mac software. Is this as expected? When is a Mac Desktop Software fo
-
Security problems. Adobe connects vires of intellectual property. and if so recognize who visited my recordings. Thank you