Cannot access the integration Management tab repository pag

Similar Questions

• Cisco SRP527w cannot find the user management tab

  Hello

  Can someone help me? I just bought a new Cisco SRP527w and I'm all new to this type of material. I can't find the tab for user management that I'm changing the default password.

  Also, I can't access the internet. My rj45 of the ADSL modem is connected to the WAN/LAN port with parameters IP static. What missed here? your help is very appreciated.

  Hi Ronald, if you are clicking on all other tabs and it still seems only the setup of the wizard, you must change your internet browser. Try Firefox or IE. This should solve that.

  -Tom
  Please evaluate the useful messages

• Cannot access the Web Configuration of RE1000 page once I have connected to my wireless network

  I can't access the Setup page of my wireless range Extenders RE1000 via IP 192.168.1.1 address once I have connected the Extender to my wireless network.  I was connected to the router via my mac and even took my mac out of wireless networks (just to be sure he wasn't trying to get to the IP 192.168.1.1 wireless.

  It happened a few times.  After it happened the first time I reset the access point and was able to get back to the web administration page.  I updated the firmware and exactly the same problem repeated once I plugged in my network home.

  This is a security feature? (Perhaps once it's on the wifi network you don't want just anybody access admin functions...?) A bug?  Or something else?

  Thank you

  If you don't set a static on the RE when IP address configure it on the connection of the SSID, it will grab an IP address from the router. You need to look in the router DHCP client table to find the RE of the new IP address. You can also use a reservation DHCP from the router to assign an IP address to the STIMULUS, but static IP is the best.

• Since the upgrade to you Bird 45.5.1am cannot access the calendar. Don't have re-installed lightning but no tabs or menu items added. Have restarted you bird & PC reboot.

  Since the last update to Thunderbird 45.5.1 cannot access the calendar (where I hope to recover all my appointment with the doctor for 2017). Have reinstalled Lightning (then restarted you bird, & also tried a reboot of the PC) and although if I have Add-ons Manager access it allows me to disable or remove 4.7.4 Lightning there is no way to access the calendar - there are no tabs, menus or extra sidebars. Also tried different keyboard shortcuts, F11, ctrl-shift-C that does not receive me in two. Any help would be appreciated / thank you

  Resolved in the clear light of day and with my newly saved profile, I used the delete option in the Add-ons Manager to uninstall the lightning. After the reboot of you bird I have re-ran then install Lightning of the Add-ons Manager. That worked and found my old calendar events as well - if all is good now.

  Hope this info helps someone else who has the same problem.

• Cannot access the portable integrated Lenovo easy camera

  Type of laptop: Lenovo IdeaPad w / Windows 7 Starter

  I can't access the integrated camera in my laptop, the lenovo easycamera

  I tried to figure out how to turn on my camera. It is built into the laptop, but I searched programs and could not find the program. Finally, I went into the control panel and I could not yet find the program until I went to uninstall/change programs where I got Lenovo EasyCamera. However, it is the only place where I can find the program. I tried searching again in the list of programs in the start (this time by typing in Lenovo Easy Camera) and he told me that no such program exists even if I saw him clearly in the list programs in the control panel uninstall/change. Does anyone know what I should to be able to access this program?

  Hello mizwindowz,

  Try the following suggestion of pcrayz at Lenovo Community Forum:
  Step 1: Download and install the driver of Lenovo easy camera for your version of windows here:
  http://consumersupport.Lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=11

  Step 2: Download the SOFTWARE of easy Capture of the pilot site above.
  Right-click on the Setup file and select Properties, then select the Compatibility tab, check the box nex to run this program in compatibility mode for: menu drop-down select Windows XP (Service Pack 3) then click apply then OK and try to restart the installation.

  If this does not help your question, then please post in the Forum of Lenovo. Clickhere for a link to the forum.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Lack the profile can not access the Profile Manager, cannot be continued

  Yahoo somehow accessed and changed the settings of my browsers safari and firefox, could not change the settings for search engine default for more than a minute, even remove engine from yahoo wouldn't last a minute, so I deleted firefox, re-uploaded, now my profile is missing...

  I can not access the Profile Manager via the Terminal, I can't do anything, Firefox is not operational at this time and I don't know how to fix it.

  In Mac OS X v10.7 and later versions, the ~/Library folder is a hidden folder.

  • http://KB.mozillazine.org/Show_hidden_files_and_folders#Mac_os_x
  • http://KB.mozillazine.org/Profile_folder_-_Firefox#Mac
  • < User > /users//Library/Application Support/Firefox/profiles.ini

  See also:

  • https://support.Mozilla.org/KB/how-run-Firefox-when-your-profile-missing-or-inacc

• Cannot access the options of color management for HP 6700 Mac OS 10.8.5 (Mountain Lion)

  Hello.

  I have the HP Officejet 6700 Premium e-all-in-one, and I can't find any way to access the color management options.

  The printer is attached (Wi - Fi) to my iMac Mac OS 10.8.5 (Mountain Lion).

  I want to correct a magenta cast for the photos I printed.  I had the problem of magenta-cast in Lightroom and use Preview to print the photos, so now I want to work with color profiles in Photoshop Elements.

  Photoshop Elements is recommended I have 'disable color management in the printer Preferences dialog box.

  However, I am not able to find for the 6700 color management preferences in settings under Mountain Lion:

  Not sub (Apple) > System Preferences > print & Scan.

  Not sub (HP utility) > Open Embedded Web Server.

  Not sub (HP utility) > the printer settings.

  Non-print preview dialog.

  I can't find any clear directions in the online help (HP or elsewhere) that I've read so far.

  Any suggestions would be most appreciated.

  Thank you!

  Michael

  Hello

  Thanks for the reply and the screen shot.

  The first thing I want to do you is to reset the printing system.
  OS X Mavericks: reset the printing system

  Then add the printer, however when it by adding not just click on the name of printers, click Add printer or a scanner. Make sure that the 'use' is set to the printer and not Airprint.
  If it is displayed as Airprint, you will be missing feautres compared to the actualy printers driver.

  After that, I'll provide you know several documents that you may find useful to perform this task.
  Documents from HP:
  Color management for the HP inkjet printing products new generation
  Advanced color management overview

  Apple documents:
  Mac OS X 10.6: edit images using ColorSync Utility
  Mac OS X v10.6: about ColorSync

  Document from CNET:
  How to use ColorSync Utility to assign color profiles in OS X

  I know some say 10.6, but they give you a reference and the idea, trying to do what you are.
  Please let me know if that helps.

• Windows 7 error: "Windows cannot access the specified device, path or file. You don't have appropriate permissions to access. »

  Hi I encounter an error message "Windows cannot access the specified device, path or file. You don't have appropriate permissions to access. »

  The error message every time I click on administrative tools of the window (including the Control Panel, windows update, the Windows Explorer, etc.) but without impact on other programs I have.

  I rebooted in safe mode and discover that everything works fine (no error message will appear when you click on window management tools).

  I proceed to do a clean boot-> first disable all services of third parties (message yet to come), and then clear the components of the service windows (message yet to come)

  I tried to type "explorer.exe" in the start menu-> search field then click right highlight to run with administrative rights, then received another message of error "Server execution failed".

  I am the administrator account on this PC - and have full access.

  The error seems to have appeared on 11 August after Windows Update the following:

  Update of security for Microsoft Windows (KB2536276, 2556532 2559049, 2560656, 2563894, 2567680), and

  Update for Microsoft Windows KB2563227

  A security update for the Microsoft.net framework 4 client profile (verson 1)

  There is no installation of any software or updates outside the windows update.

  I also tried to restore the windows before August 10, 2011, but that did nothing.

  As the error prevents me to access any object Admin window - I'm unable to retrieve the product ID and write to Microsoft Tech and ask for help.

  I hope some of you can offer the suggestion of possible solutions (I really want to re - install window 7 and other software, I'm sure).

  Thank you.

  My solution works in about 2 minutes, it's a very weird error and only happened to 3 jobs in the last 3 years, this solution does not need to create another account if local administrator is active and allows access to the corrupt user documents ect.

  Log in as the local administrator or a domain administrator

  If the local administrator is not activated refer to http://support.microsoft.com/kb/555910 and after completing these newspapers of steps on the local administrator account.

  Locate the user for example files. C:\Users\[username]\

  If you see no AppData press Alt to see the toolbar at the top of the window, select Tools > folder options, go to the view tab and select "Show hidden files, folders and drives" click OK.

  Go to AppData\Local

  Select all (Ctrl + a).

  Delete

  * Do not delete credentials (as it will remove their wallpaper) *.

  This allows to release the error.

• Jpg file printing - windows cannot access the specified device, path, file

  Original title: I have a similar problem, I can open the jpg fine, I can't print it

  I have a similar problem, I open the jpg fine, I can't print it, permissions are fine. I get the same erorr-windows cannot access the specified device, path, file...

  Hi Janine.

  1. are you able to print documents?

  2. the problem occurs only with a particular image file?

  3. how the printer is connected to the computer?

  4. What is the brand and model of the computer and the printer?

  5. have you logged as administrator?

  Method 1:

  First of all, try to print a test page and check if it works:

  To print a test page

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_test_page.mspx?mfr=true

  Method 2:

  I suggest you check out the link to use the System File Checker tool (SFC) to troubleshoot missing or corrupted system files in Windows:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Note: you must have the Windows XP disc to make the SFC scan.

  Method 3:

  I suggest you to turn off all third-party security software and the Windows Firewall and then try to print the file:

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  http://support.Microsoft.com/kb/283673

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Let us know the results.

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• RootKit/Malware/Virus problem - windows cannot access the specified device file or the path, you don't have permissions

  Hello

  I have a problem with my computer it has been infected by a virus that is not visible in normal mode. It prevents running any application that would help in the detection and removal. I tried running mrt, mcaffe, trendmicro rootkit detector rootkit detector, spybotSD, analysis windows Defender online Windows live onecar. All these works for a minute and then shutsdown, when I click it again I get the error, as mentioned in the title, 'windows cannot access the specified device file or the path, you do not have permissions.

  This problem has a solution or re - install is the only way out?

  The pointers/help appreciated.

  Just to add, I am able to connect using my last known good configuration and only safe mode configurations.

  Thank you

  Id2View,

  1. follow all the instructions in this thread: How to get rid of malware

  2. If still no joy you can find Microsoft MVPs and other trained analysts on the following support sites:
  Aumha.org
  Atribune.org
  SpywareHammer
  BleepingComputer
  Safer-Networking

  3. If you need help with virus-related issues, contact the Support Services Microsoft product.

  To support the Canada and the United States, call toll-free (866) PCSAFETY (727-2338).

  For support outside the United States and the Canada, visit the page Web of Product Support Services.

  4. If you need more assistance for the position of the newsgroup Microsoft - security - virusvirus/worm.
  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Security.virus
  Via the Web:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Security.virus

  Hope this helps,

  Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• Vista Home Premium gives the message "linked to limited accessibility" and I cannot access the internet.

  I have Vista Home Premium and trying to connect to a WiFi spot, I get the message "linked to limited accessibility" and I cannot access the internet. I understand this is common for Vista and there is a fix for this problem, but want to make sure that I get the right one and can't seem to find anything referring to this issue on the Microsoft site

  Hello

  This problem happens only when connecting to a particular place for the WiFi?

  You can follow the suggestions and check out them.

  Method 1

  You can read the article.

  Message when a device on a Windows Vista-based computer uses a network bridge to access the network: "connected with limited access".

  http://support.Microsoft.com/kb/930517

  Method 2

  Disable IPv6.

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Method 3

  Temporary disable your security software.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note: Software antivirus and firewall can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attack.

  Method 4

  You can reset the TCP/IP stack.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

• Error message "Windows cannot access the specific device, a file, or a path. "/ setupstb.exe".

  One offers a solution to my problem of Vista Home Premium that prevents me to access my Microsoft Web Cam (also "glik' won't let me upload files.). Thank you very much in anticipation. Tony

  Hello

  Please only post the same question once in these forums

  an answer another thread

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/error-message-Windows-cannot-access-the-specific/603544f6-b346-E011-86fd-d485645a8348?page=1&TM=1299283083484#footer

• Error: "the process cannot access the file because it is being used by another process." when treid to install the device driver

  Original title: Windows cannot install the drivers

  I had a lot of trouble installing the drivers on my Windows computer.  I went straight in the Device Manager and deleted the devices I tried to install and reinstalled them, I went into safe mode, I got Windows to run the console and only the basic process and run from there Device Manager... no matter what I do the same mistake.

  "The process cannot access the file because it is being used by another process".

  Even after a restore of the system, he did this, and I don't know what to do anymore.  Only devices that have been previously installed work.

  What's more important install my Blackberry software because my phone is broken.  The software cannot detect my phone because the drivers have not been installed.  Most of the devices I can use with Linux (I have Windows Vista and Ubuntu running on the same computer), but RIM don't make Blackberry for Linux software, so I have to do it on Windows.

  Hi paco2012,
   
  1. did you of recent changes on the computer?
  2. how many user accounts you have on the computer?
   
  Try these steps and check the result.
  Step 1: Install the driver as an administrator
  a. shut down the computer runs.
  b. start the computer and the connection as an administrator.
  c. find the driver configuration file, right-click on the file and click "Run as Administrator".
  d. follow the instructions in the wizard to install the driver.
  e. restart the computer once the driver is installed.
   
  Step 2: Try to install the driver to boot either by disabling all non-Microsoft programs
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot."
  c. restart the computer.
  d. install the driver and verify the result.
  e. follow "step 7: reset the computer to start as usual.
   
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why can't I access the Intel Management Engine BIOS?

  I have a Dell Precision Tower 5810 running Windows 8.1 Pro 64-bit.

  My system has an integrated NIC (Intel 1217-LM Ethernet connection)

  You're supposed to be able to access the Intel Management Engine BIOS by pressing Ctrl-P, when you see the screen that tells you to press Ctrl-P to enter MEBx Setup - but the screen never appears when I reboot everything by attaching masking tape on the F12 key.

  I have reason to believe that DHCP can be sayabled in the BIOS Intel Management Engine & I need to enable because my optical fiber ISP uses dynamic instead of static IP addresses IP addresses.

  MEBx is VPRO no INTEL Management Engine.  If you have an INTEL CTRL P then there will be a white sticker inside the case with a number.

  If it's a 3 MEBx is disabled permanently at the factory.

  http://www.Dell.com/support/article/us/en/19/SLN143077/en

  This label has a number that indicates the management mode that you choose get configuration appropriate for the computer.

  

  There are 3 parts of the software other than BIOS

  Intel Chipset S/W installation utility
  Intel AMT HECI
  Intel AMT GROUND / LMS

  CTRL P is very old in the

  Optiplex_755_Users_Guide_iAMT.PDF

  http://downloads.Dell.com/manuals/all-products/esuprt_desktop/esuprt_optiplex_desktop/OptiPlex-755_user%27s%20Guide%202_en-us.PDF