Cisco SRP527w cannot find the user management tab

Similar Questions

• Cannot find the user profile

  After turning on my computer, I try to connect with our user account. an icon appears and says that the user profile is damaged and there could be a security issue.  the following icon says that it cannot find the profile of the user and that a temporary profile has been put up.  I'm trying to get back access to the user profile because he has sensitive information at the time that must be consulted, photos of family and passwords important programs.  I need to know that if there is a way to restore the user profile and retrieve information, the user profile of temporay gives access to certain programs and software, but not the critics.

  The following procedure, you should get pretty quickly:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Damaged profiles are almost always accompanied with alteration of the disc.  In addition to the above (or sometimes instead of him), a check disk with the /f or/r option is highly recommended.  Note that on a large drive or a drive with a lot of problems this audit can take hours and you cannot use your machine while it is in progress.  In addition, there is a small chance that it may be worse, so now is a great time to update your backups.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• Cannot access the integration Management tab repository pag

  Versions - E - BUS - 12.1.3 - SLES 10 - SP3
  DB - 11.2.0.3 - s390 - zLinux
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  One of my users trying to get to the Administration tab on the integration repository, but does not see the tab. It has the SYSTEM ADMINISTRATOR and SYSTEM ADMINISTRATION responsibilities assigned
  
  If I login as a SYSADMIN, I can see both the repository tab as well as the Administration tab.
  
  Everything does know why he can't see the Administration tab.
  
  Also when you browse Managemenr user, I can't find the integration repository administrator role
  
  Is this something which was not correctly filled during the initial installation?
  
  (As usual) any help is very appreciated.
  
  Thank you

  864641 wrote:
  Versions - E - BUS - 12.1.3 - SLES 10 - SP3
  DB - 11.2.0.3 - s390 - zLinux
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  One of my users trying to get to the Administration tab on the integration repository, but does not see the tab. It has the SYSTEM ADMINISTRATOR and SYSTEM ADMINISTRATION responsibilities assigned

  If I login as a SYSADMIN, I can see both the repository tab as well as the Administration tab.

  Everything does know why he can't see the Administration tab.

  Also when you browse Managemenr user, I can't find the integration repository administrator role

  Is this something which was not correctly filled during the initial installation?

  (As usual) any help is very appreciated.

  Thank you

  Add "PIR administrator" role for this user and it should work then (ask the user to disconnect and reconnect)-"Integrated SOA gateway" responsibility does not appear "SOA Monitor" for the user. [1268115.1 ID]

  Thank you
  Hussein

• Cannot find the user name and password

  I tried to download firefox, but when I open the page he asks me a username and password. I tried everything, but insofar as cannot access the internet.

  ID it by default user name and password, or am, I sent one, if this is not how to solve this problem?

  Download Firefox from this page:

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

• Mail application cannot find the user/Library/Mail folder

  Hello

  Recently my laptop crashed and I had to reinstall first OSX 10.5.8, so I've updated to 10.6.8 and now I have the latest version of El Capitan.

  In the first two versions relocated I could normally restart Mail with my backup files restored (had to reinstall all the good e-mail accounts), but now I want to open the mail application in El Capitan and it won't open, saying that it does not find a user/Library/Mail folder. But it IS a Mail folder and there all the restored items and folders inside.

  I also find the file com.apple.mail.plist in my preferences, I thought that maybe that was the problem, but it seems that it is not.

  Can anyone help please?

  If the folder you want is "user/Library/Mail" then the folder in fact does not exist.  Try instead "~/Library/Mail.

• Re: Satellite A100 cannot find the power management tool in order to use the FN + F2 keys

  I had to recently to wipe my laptop and reinstall everything, all managed to find it of back on my laptop, with the exception of the power management program, the Fn + F2 program.

  I don't remember what her name and I don't know where to get.
  And if there is a CD that came with my laptop, I'm lost.

  Can someone help me please?

  Hello

  There is only one tool of power management. It is called; TOSHIBA Power Saver.
  You can buy it on the European driver Toshiba page!
  Choose the model of laptop just in the form of driver download, download it, unzip the package and install it!

  Concerning

• Cannot find the user accounts at startup in vista

  I wonder if there is a solution to my problem.  I've set up 3 user accounts, and when I turn on my computer, it only shows 2.  It does not even show the guest account.  Please tell me that there is a simple solution!  :-)  When I connect each account they seem to work well. (I have them in place the way I want them) but I really need the active a 3rd too.

  Thanks in advance for any ideas!

  HI Cinde.Moore,

  Have you created an account of third parties for clients, or are you need turn on the prompt (built in) account?

  Enable or disable the guest account the

• Please help to cancel my subscription of single-app creative cloud for Acrobat Pro (at least) which has been subscribed by mistake and now I am penalized for her 3 months. Cannot find the plan tab Cancel in adobe India website

  Please help to cancel my subscription of single-app creative cloud for Acrobat Pro (at least) which has been subscribed by mistake and now I am penalized for her 3 months. Cannot find the tab cancel the plan to manage the website of adobe India tab. Help, please...

  Cancel your membership Adobe Creative Cloud

• Can't backup windows because Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))

  can not backup windows because: Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002)).

  Maybe it's because I disabled the camera to prevent other people using the computer?

  [Moved from comments]

  Hi Marrcel,

  Thank you for keeping us posted.

  The issue can be due to turning the camera off. I suggest you to activate the camera and try.

  Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Download error "Windows cannot find"C:\Users\User\Downloads\ ((name of the program here))". Make sure you typed the name correctly and try again. »

  Original title: ((Vista)) I can't install anything!

  So, basically, I have a Windows Vista. I'm using Google Chrome, but that doesn't really count because I tried on all browsers. When I try to download something, it comes up with something like that... "Windows cannot find"C:\Users\User\Downloads\ ((name of the program here))". Make sure you typed the name correctly and try again. "This has nothing to do with a name of typing correctly. I'm downloading at the wrong place? If Yes, where can I download it?

  Hello

  Thanks for posting in the Microsoft Community.

  If I understand correctly that you have problems with downloading files on Windows Vista.

   

  Please follow the below mentioned thread that addresses a similar issue:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Windows-cannot-find-error/537677b9-016b-427e-8cc6-50f8620c84bb

  Note: The thread also applies to Windows Vista.

  Hope the helps of information. We know if you need help. We will be happy to help you.

• When you try to upload a document in Word from the Internet Windows error: "Windows cannot find"C:\Users\jma1... ". »

  Whenever I try to upload a document in word from the internet, I get a msg of error "Windows cannot find"C:\Users\jma1\AppData\Local\Temp\Low... ". "It will not download every word on the internet documents. How can I fix? Please give me instructions step by step. Thank you!

  Need help

  Hello

  1. doesn't this problem occurs only with download of word or other files?

  2. what version of internet explore do you use?

  I suggest that you try to upload to another location and check.

  Method 01:

  I suggest also allows you to check in SafeMode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  I suggest you to follow the methods and check.

  Method 02:

  How to remove the contents of the temporary Internet files folder

  http://support.Microsoft.com/kb/260897

  Method 03:

  I suggest you to follow the steps and check.

  Run the command to reset the low integrity level on the low folder

  (a) click the start Pearl, click on "All programs" and click on "Accessories".

  (b) right-click "Command Prompt" and click "Run as Administrator".

  (c) in the window "Administrator: command prompt", copy and paste (without the quotes)

  (d) "ICACLS"% userprofile%\AppData\Local\Temp\Low"/setintegritylevel (OI) (CI) low.

  (e) press ENTER.

  (f) restart the computer and test the issue.

• "The system cannot find the specified file" error when you try to install a hotfix/cab package using the DISM tool Package Manager

  I'm testing the integrity of the addon ".cab" packages and patches by installing using the Package Manager (pkgmgr.exe), or alternatively, the Deployment Image Servicing and Management Tool (DISM.exe) for Windows 7.  To do this, I am aware that I have to call a tool through the command line.

  In the Package Manager, I use the syntax

  Command prompt > pkgmgr.exe /ip /m:C:\Test\test.cab

  Otherwise, I might add the path in quotes:

  "Command prompt > pkgmgr.exe /ip /m:"C:\Test\test.cab.

  The error returned in pkgmgr is:

  Operation failed with 0 x 80070002.  The system cannot find the specified file.

  My first impression was that my syntax is incorrect, although I can't have room for error.  The path points to "test.cab" which is a renamed windows addon that contains the necessary file "svcpack" and the file "entries_XX.ini".  I used several different ".cab" file, that which some I know to be genuine, hopefully exclude the possibility of a corrupted or incompatible file.  I also tried this procedure on different computers and received the same error code, so I doubt that the tool pkgmgr istelf is corrupt.

  Finally, I tried an alternative Windows 7/8 DISM tool to try to achieve essentially the same task by using the following syntax in a command prompt:

  "Commnand prompt > DISM.exe / Online /PackagePath:"C:\Test\test.cab Add-Package ".

  This produces a similar error:

  An error occurred trying to open it - C:\Test\test.cab error: 0 x 80070002
  Error: 2
  The system cannot find the specified file.
  The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

  I'm really not sure why I produce these errors.  Any idea is appreciated.

  Hello

  Thanks for posting your question on the Microsoft Forum.

  I suggest you to ask your question in the TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking&filter=AllTypes&sort=lastpostdesc

  TechNet is watched by other computing professionals who would be more likely to help you.

  I hope this helps.

  _________________

  Thank you best regards &,.

  Isha Soni

• Cannot manage libraries. Cannot retrieve CD using Windows Media Player 12, error '"Windows Media Player cannot find the file'

  Original title: WMP 12 won't fill the library, allow me to manage the libraries, or it is for me to rip music

  WMP 12 is unable to find my music files; When I select > Union > manage libraries > music (or any other library), nothing happens. If I try to extract a new music CD WMP will not let me select a location to store the file torn; If a test of tear, anyway, I get an error message saying WMP "Windows Media Player cannot find the file.

  Through the windows, I can see my music library and that it complements filled with many good things and play music that is then added to the library WMP one track at a time. But that bat rather point to WMP.

  I have added and deleted folders from the libraries of music, I used different hard drives, I used the store to library WMP and I installed and uninstalled and reinstalled WMP three times, I tried using WMP with and without Windows Media Center. Nothing helps. Any ideas?

  Hi Watford CVS,

  Try to enable and disable Windows Media Player and check the result.
  Step 1: Disable Windows Media Player
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand multimedia functions.
  c. uncheck Windows Media Player and click ok.
  d. restart the computer so that the changes take effect.

  Step 2: Turn on Windows Media Player
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand multimedia functions.
  c. place a check on Windows Media Player, and then click ok.
  d. restart the computer so that the changes take effect.
  e. check if the problem persists.

  See Or turn off Windows features turn on

  Visit our Microsoft answers feedback Forum and let us know what you think.

• IO error: C:\Users\Shravan\AppData\Local\Temp\widgetGen.13585025011375276733210. tmp\sampleapp (the system cannot find the file specified) [ERROR] CAP exception has occurred

  C:\Program search in Motion\BlackBerry 2.3.1.5 > bbwp SDK WebWorks
  C:\apps\sampleapp.zip o C:\apps\Output2
  [INFO] Parsing of the command line options
  [INFO] Bbwp.properties analysis
  [INFO] Validation of archive application
  [INFO] The analysis of config.xml
  [WARNING] Cannot find an element of
  [INFO] The application of filling source
  [INFO] Compilation of application BlackBerry WebWorks
  IO error: C:\Users\Shravan\AppData\Local\Temp\widgetGen.13585025011375276733210
  . tmp\sampleapp (the system cannot find the file specified)
  [ERROR] CAP exception has occurred

   

   

   

  How do I solve this problem

  The tools are not compatible with JDK7. You need to install JDK6 and it must be the 32-bit version.

  If you have several versions of the JDK, you can modify bbwp.properties in the subfolder bin of your SDK WebWorks to include the following text:

  C:\Program Files (x86)\Java\jdk1.6.0_31

   

  
  You would update the JDK version to match your own, but note that this is the SEO Program Files (x 86); the path 32-bit installations. This way you can have several JDK if you need, but the command bbwp must reference the appropriate JDK.

  In short, he must be JDK6 and it must be 32-bit.

• Failed to start Remote Access Connection Manager Service. Get the 20 error: the system cannot find the specified device.

  This seems to have started with the last batch of updates of Windows 7 (including SP1).
  I can't connect using dial-up.  Get the message:
  Cannot load the Remote Access Connection Manager service
  Error 711: The operation could not complete because it could not start the remote access connection manager service
  in time.  Please try the operation again.

  When I try to start the Remote Access Connection Manager service manually, I get the message:
  Windows could not start the service on Local computer remote access connection manager.
  20 error: the system cannot find the specified device.

  My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.

  I don't know what else might have changed.

  Hello Vince_867,

  Thanks for your post.  Take a look at this thread for a possible solution to your problem.

  See you soon