Cannot access the virtual center with web access

Similar Questions

• Cannot open the project file with write access.

  I saw that this problem has been reported before, but have yet to find a solution.

  I have my project file in an external hard drive.  When I plug the hard drive to another computer and want to save it, I get this message:

  "Cannot open the project file with write access.  The file may be locked, or you don't have permission to write to this location.  Select Save as... »

  I don't want to register as because other projects refer to this file and also my file is still going to be ruined.

  FYI two computers use Windows 7.

  All solutions?

  Right-click on the folder in Question and select Properties. Select tab security make sure you that you then add everyone to the list of users. Do you this by selecting edit and then add. Type in all members of the section of the object, and click ok. Then select all the user and check full control. Press Apply and we'll adjust the permissions for the folder and subfolders and files.

  Eric

  ADK

• store the object reference handle (MOR) to synchronize with the virtual center of vSphere

  Hello

  I am able to store a bit in my own DB and assume that they don't change, so that I can match the entities in the virtual centre with those of my database loading my application?

  Document best practices of Balaji Parimi (http://communities.vmware.com/docs/DOC-9912) States:

  Caching of managed object references rather than their
  Properties makes it easy to keep the cache to update. It is easier to maintain
  the cache, as the references remain unchanged until the managed object is removed from the inventory of managed object.

  Because of this comment, I am inclined to believe that I should be able to write the bit on my side in the DB and use them as described.

  Why I ask this is because:

  • It seems that a lot of people is keen to track VMs by uuid.  I'm guessing they are only followed VMs, otherwise they would probably have the same problem I'm having (ex: If a Resource Pool gets renamed while the application is down, how can you identify whether the same as the one you had).

  • The vSphere Web Services SDK Programming Guide seems to be confusing by having a section entitled Do not store Managed Object reference values.  This section seems just to point out that the MOR is not the same between the vCenter server and ESX box.  Because I don't like to manage the host communicating directly with it (and keep track of the GPR in this way), I don't see how this would apply.

  Has anyone been matching their own entities vmware with JAWS?  Is there a reason for (am I wrong something)?  Wouldn't be wonderful if this confusion has been cleared up by Balaji Parimi or VMware themselves.

  Thank you

  Ivan

  The recommendation contained in the best practices doc is right.

  You can store the MOR of an entity in your DB.

  For such objects as hosts, VMs data warehouses, etc... Essentially, this is the unique key that identifies the object.

  And the MOR will change during the lifetime of this object in the DB vCenter.

  The only way it modifies if it removes and adds the object. So for all practical purposes it is a new object anyway.

  What the program guide refers, is the fact that this MOR the 'ID' of the object is only within this system namespace.

  Thus, the VM MOR is unique within the Victoria Cross.

  That MOR are only may not or may not even be object even if you connect directly to the ESX host using the SDK.

  The guide is just trying to clarify that the MOR of a VMS in vCenter isn't the same as if you connect to the ESX host directly.

  That said, if you never connect to the ESX host directly you must not care about this specific recommendation in the guide.

  Hope that clarifies things.

• Cannot read ANY book - even bought. code E_ADEPT_INTERNAL. Cannot remove the authorization/reauthorize with computer: "unable to clear permission. Please try after some time. "Tried for two weeks...

  Cannot read ANY book - even bought. code E_ADEPT_INTERNAL. Cannot remove the authorization/reauthorize with computer: "unable to clear permission. Please try after some time. "Tried for two weeks...

  Windows:

  1. Close all applications.
  2. Click Start > run.
  3. Open, type regedit in the text box and press ENTER. The Registry Editor opens.
  4. In the left pane of the registry editor, locate the following registry key: HKEY_CURRENT_USER\Software\Adobe\Adept
  5. Select the key of the follower.
  6. Choose file > export.
  7. In the export registry file dialog box, select the branch selected under export range. Enter a name and location for the backup registry key, and then click Save.
  8. Right click on the key to the follower, and then choose Remove.
  9. In the dialog box confirm the key deletion, click OK.
  10. Close the registry editor.
  11. Open Adobe Digital Editions and reauthorize.

  Macintosh:

  1. exit the Adobe Digital Editions software.
  2. Navigate to / Users / / Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash.
     If you use 10.7, see library access hidden files. Mac OS 10.7 and later.
  3. Open Adobe Digital Editions and reauthorize.

• See Virtual Machine role cannot accommodate the virtual machine is on. Help please.

  Hi all. I'm trying a re-branded minimum permissions to a group for some virtual machines. The role of Virtal Machine user seems to be a perfect fit. The only problem I have is that the user can't see what host the virtual computer is on. If they are in the VMware Infrastructure Client and click on the Summary tab, it is empty. The reason why I want to see them is if they need to use a CD-ROM to install an application in that they need to know what a host to the CD. Can someone tell me which box to check if I go and change the role? Is there a better way to do it?

  Any help is greatly appreciated.

  Welcome to the Forums!

  If they have access to the virtual Center and the access flag to the virtual machine itself, why not just mount the .iso/CD on the computer virtual in question then disconnect when you are finished.  Having to put a CD in an ESX host, every time something must be installed not the ideal way

  If you have found or any other post 'useful' or 'proper' Please consider awarding points.

• How to record a custom message / event in the virtual center of the virtual machine

  Is it possible to record a personalized message in the virtual center of the VM?

  I use a vCLI script to reset a virtual machine. I want to report where (PC) this script is launched.

  And it would be great if it is possible to report to the event list or task of the virtual machine that will be reset.

  You can relate from where and which this script is initiated by the following script

  #!/usr/bin/perl -w
  # CustomEvent.pl
  
  #
  use strict;
  use warnings;
  use VMware::VILib;
  use VMware::VIRuntime;
  
  my %opts = (
     vmname => {
        type => "=s",
        help => "Name the virtual machine associated with the event",
        required => 1,
     },
  );
  
  Opts::add_options(%opts);
  
  Opts::parse();
  Opts::validate();
  Util::connect();
  
  my $vmname  = Opts::get_option('vmname');
  my $username, my $compname;
  ($username = `echo %USERNAME%`) =~ /(\S+)/; $username = $1;
  ($compname = `echo %COMPUTERNAME%`) =~ /(\S+)/; $compname = $1;
  
  my $EventManager = Vim::get_service_content()->eventManager;
  my $EventManager_view = Vim::get_view(mo_ref => $EventManager);
  my $vm_ref = Vim::find_entity_view(view_type => 'VirtualMachine', filter => {'name' => $vmname});
  eval {
      $EventManager_view->LogUserEvent(entity => $vm_ref, msg => "CE_RESTARTVM : VM $vmname restarted by $username from $compname.");
      Util::trace(0, "\n CUSTOMEVENT \'VM $vmname restarted by $username from $compname.\' post Successfully.\n");
  };
  if ($@) {print "Error: ". $@ . "\n";}
  Util::disconnect();
  

• Migration of the Virtual Center of SQL2005 database to a new server running SQL2008

  Virtual Center 2.5 Build 147633

  ESX hosts 3.5.0 143128

  Separate server database running SQL 2005

  We replace our SQL2005 server with a server SQL2008. We will migrate the database of VC on him. What are the steps on the side of Virtual Center. My plan is to:

  1. Backup the database

  2. Stopping VMWare services

  3. Migrate the database to SQL2008

  4. Change the Virtual Center ODBC connector to point to the new database server

  5. Restart the VMWare services.

  Is there anything, I'm missing or should be cautious?

  just note that, as of today, SQL 2008, is not a database supported for vCenter

  https://www.VMware.com/PDF/vi3_35/esx_3/R35/vi3_35_25_compat_matrix.PDF

• Installation of SQL Server for the virtual Center Server

  Hi all

  We bought 16 x 2 for ESX server CPU licenses.  So, I will prepare a database of virtual server of the Management Center 16 guests. As SQL Server 2005 Express is installed during installation of Virtual Center Server but VMware is recommended for use only for 5 guests.

  So I would like to prepare a database of SQL for VC server, please help me how to make the database to the virtual Center Server. Are there special tables, configuration, permissions. I have no experience with databases then how should I go with it. Is there a guide for it. The ESX Server installation guide explains only create ODBC connections.

  Please help me with this I would be very obliged.

  I know that the procedure is restrited 2 steps (1 and 2) on page 68, but you need to install and configure SQL Server for your business standard (I guess asking the C: or D: and data/newspapers on E :). I'm not going to explain better how to install SQL Server on a server. For the SQL Server database:

  • Step 1: you create a database storing the files on the right disk (with at least 30 GB) with a default database size to the size defined by the "Calculator" (value of + 15% on the line of your choice statistical level).

  • Step 2: On your Microsoft SQL Server, create a user of SQL Server database with the database rights of operator (DBO). The default database for the DBO User is that you defined in step 1. Make sure the database user has a role of sysadmin server or the role of database db_ownerfixed on the VirtualCenter database and the MSDB database. The role db_owner on the MSDB database is required for the installation and upgradeonly. This role can be removed after installation or upgrade process iscompleted.

  The user must be created for your standard business as service account (password never expires) with a long and complex password.

  Other steps in the document are for the ODBC connection.

  Creating the tables is made during the installation of VC. Nothing to do. A characteristic is not to stop the SQL Server agent because some tasks are scheduled in the database to 'compact' statistics.

  For the record, the database is upgraded when installing patches VC creating of new tables, updating of data type or...

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot send the UDP datagram with device 8320 (V4.2.2.180)

  There is a post says "Cannot send the datagram UDP with JDE 4.5" to

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=14528&view=by_date...

  In the emulator of JDE4.2 it really works, but he meets the same problem in the blackberry8320 (V4.2.2.180) device, get the same java.io.IOException (detailMessage = null) to the send() operation;

  I looked in the (accessible via wifi) PC with a tool named Sockettool (it can create the client and Server TCP/UDP), it can be connected to the emulator and receive datagrams sent to the emulator, but can not be connected to device.

  Is this a problem related version too?

  Appreciate if you can share your experience with datagram connection to the device.

  Here is my code:

  Emulator: host = "udp://iport1; port2.

  Feature: host = "udp://iport1; port2 /; = wifi interface.

                  try {
                      udp_client = (DatagramConnection) Connector.open(host);
                      byte[] data = {65,66,67,68};
                      int len = data.length;
                      dg_out = udp_client.newDatagram(data, data.length);
                      udp_client.send(dg_out);
                      udp_client.close();
              }catch (Exception e) {
                      System.out.println("UDP Exception:"+e.getMessage());
                  }
  

  If the application is able to send and receive UDP traffic in the BlackBerry Simulator, but not on a BlackBerry real pocket computer the first thing to check is to check that your carrier supports.  Several carriers do not support UDP traffic or restrict to specific ports or data types.  This can cause exceptions or make it appear that the application will silently fail (carrier is just dropping packets).

• Create the virtual machine with the ISO mounted CDROM

  Community of hell!

  Working on the vmcreate.pl script to add the creation of CD-ROM with iso data store, I got stuck on the error

  ' Invalid device configuration: ' VirtualSCSIControllerOption.numSCSICdroms '.

  I'm sure I'm missing something obvious, or this option but may not understand how to deliver this.

  I created a cdrom as follows (below test I create any CDROM, no iso file to reduce the number of layers):

  my $ BPPRR m_backing_info = VirtualCdromRemotePassthroughBackingInfo->new)

  deviceName = > ' '.

  exclusive = > 0,

  );

  my $description = description->new(label = > 'CDROM', summary = > 'cdddrom');

  my $connectable = VirtualDeviceConnectInfo->new(allowGuestControl = > 1,)

  connected = > 0,

  startConnected = > 1,

  ( State = > inmates ' / ' );

  my $ BPPRR m = VirtualCdrom->new(backup = > $BPPRRm_backing_info,

  connectable = > $connectable,

  controllerKey = > 0,

  deviceInfo = > $description,

  key => 1,

  ( unitNumber = > 1 );

  VirtualDeviceConfigSpec->new(device = > $BPPRRm,

  operation = > VirtualDeviceConfigSpecOperation->new()'add'));

  Did anyone have working example to create the virtual machine with CDRom?

  Andrey

  If someone will find this useful I followed this route Re: vmreconfig.pl add the device CD/DVD fails if the virtual machine created with vmcreate.pl

  and also I found good examples of what I need to in VMUtil.pm in cmd vmsphere libraries.

  Andrey

• Doubts about sound in the virtual machine with w2k3

  Hi all

  I have the following question on the sound:

  • In my lab I have an ESXi 4.1 without sound card.
  • I create a virtual with Windows Server 2003 computer.
  • When I connect to my VM via Remote Desktop, I hear the typical sound of logon of windows acroos the speakers of my laptop. Why, if my VM doesn't have a sound card?
  • What kind of sound can reproduce via Remote Desktop if the server has no sound card?
    

  If anyone can clarify on this, I'll be very grateful

  Thank you

  Hello febsa

  The virtual machine with W2003 used your computer speakers.

  What kind of sound can reproduce via Remote Desktop if the server has no sound card? Only the default Windows 2003 sounds

  
  

• Unable to start the virtual Center after removal of the database

  Hello

  I've migrated my database of vc sql200O for sql 2008.

  The migration went smooth without error (I followed the vmware 7960893 kb). I changed the dsn system on the new server name.

  But when I try to start the virtual Center service that it fails.

  I get this error in the log:

  VDB::connection:TestConnection SQLExecute failed: S 42 02:208

  VDB::LockRepositoryHelper Missing table Vpx_dual

  Could not initialize the VMware VirtualCenter. Closing...

  Force the closure of VMware VirtualCenter now

  Someone at - it an idea?

  New server is win2008 64 bit thanks

  If anyone can confirm this?

  then of course, you have tested the connection, but you have not read the manual?

  NO, this is NOT supported, there is your problem.

• Migrate the Virtual Center databases

  I'll be moving on my DB Manager Update VM DB, composer DB VM and VM DB license to a new SQL 2005 server, virtual Center. Is it OK just to stop the services on the Virtual Center and DB SQL Server and then migrate the DBs to the new server? And then then recreate ODBC connections?

  Yes, I stopped services.  Also, see this KB, http://kb.vmware.com/kb/7960893 , it may be useful

• Impossible to turn on the virtual machine with the following error: could not open the disk ' / path/to/vmdk-0001.vmdk ' or one of the Flash disk it depends on. Reason: Broken pipe.

  After the movement of virtual machines in VmWare Server 2 for ESX 4i, I get this error when you try to start the virtual machine:

  Impossible to turn on the virtual machine with the following error: could not open the disc

  "/ path/to/vmdk-0001.vmdk" or one of the Flash disk it depends on.

  Reason: Broken pipe.

  Anyone's idea what is the problem here?

  How did you move virtual machines?

  Did you use the converter (https://www.vmware.com/tryvmware/?p=converter)

  Otherwise try converter