the printer 0x610000f6 error

Similar Questions

• HP Officejet Pro 8620 does not print, but the document is sent to the printer without error

  I bought a HP Officejet Pro 8620 and connect 2 computers via a wireless connection with the latest driver.
  In the first computer (windows 7) I can print without any problem
  On the second one (windows 8), when I try to print, I can see in the windows printer spooler file that I'm going to print. The file is sent to the printer, without error, BUT nothing happens.
  I already tried reinstalling the drivers, restart the computer, the printer. I tried to connect to a wired network. It still does not. It's very weird but I got no error, just does not print. I thought that the printer does not work, but on the second computer I can print.
  Thank you for your advice

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• HP Photosmart 3110 referred to the documentation for the printer. Error 0xe18a001

  HP Photosmart 3110 referred to the documentation for the printer. Error 0xe18a001

  Hello caromuna,

  It seems that other users have found a way to completely reset the printer back to the default settings, which can help with this question.

  The reset is discussed in this forum thread and seems to be a bit difficult to fill. Let me know if it helps to solve your problem.

  Photosmart 3310 ink system failure

• When I try to print, the queue varies from 0 document (s) in the printer queue: error

  * Original title: printer: error

  Overview:

  I have a Dell 560 which has Windows 7 64 bit is installed.  My printer is an old HP Officejet v40xi.  Have had two e connected by a USB cable for 3 years.

  Location:

  I ran out of ink.  I had not been printing a lot, so I did not fill the cartridges for several weeks.  I had a bright idea to reinstall the printer software for the printing/tool box I used on another computer.  I wanted to do a scan.

  I deleted the software and tried to download the software again.  The disk could not be downloaded on Windows 7 64 bit.  So I got the software from the HP site.

  When I try to print, the queue varies from 0 document (s) in the printer queue: error.  I reloaded the software twice, I put on a new USB cable and I changed the port.  I still get the same message.  Troubleshhot Windows printer also, indicates that it cannot determine the problem.  I went to HP and did not find any help.

  Does anyone know how to solve the problem?

  Hello

  -What is the full error message?

  I suggest you link and check if that helps.

  Unable to print? Print jobs are stuck in the print queue

  For more information, see the link.

  Solve a problem

  If the problem persists, contact HP support for help.

  Let us know the results. We will be happy to help you.

• I have Photosmart 5580. When I switch to the power I get the 9995F886 message. I have reset the printer and error

  When I switch to the power I get the 9995F886 message. I have reset the printer and the error disappeared. What is this error message? How can I delete it for good.

  bedamax,

  This article should help to resolve the error you get:
  http://support.HP.com/us-en/document/c03081973

  Try the steps and tell us if it helps.

  Good luck!

• Removal of documents in the print queue - error message

  I'm unable to remove a document from the print queue - the status of a document is "deleting - error - printing".  Subsequent print jobs do not print due to this error.  If I select 'cancel all documents' all other jobs are deleted, but it is still there.  I chose this & tried to cancel it, but I get a message "Error processing command" at the bottom.

  Hello

  · What is the number and model of the printer?

  · Do you remember all the recent changes on the computer before the show?

  You can check out the link below and try the suggested steps: how to cancel printing or to delete a print job that is stuck in the print queue in Windows XP: http://support.microsoft.com/kb/946737

  Also try the steps listed in the link below: printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• Pavilion 500 series: printer does not complete the print job & error message

  Got a HP Deskjet 2542, but recently bought a new HP, Pavilion of the 500 series desktop computer.  When you try to print a document that is located at 3 pages, it will print the first page, and then part of the second page, then an error message appears.  Went to the HP troubleshooting & tried everything, but nothing seems to fix the situation.  Any ideas or suggestions?

  Hi @Themommy,

  I saw your post about the error message that appears when printing with your HP Deskjet 2542.

  I need a little more information to give you the best course of action.

  What is you receive the exact error message?

  Without this error message, I suggest trying a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing problems. I recommend you to download and run the HP print and Scan Doctor, if she doesn't fix it automatically let me know what errors or messages that you receive.

  You can always try to uninstall the printer software and then by downloading new firmware for you printer. Click on this link to get the all-in-one HP Deskjet 2540 Printer series full feature software and drivers.

  Just note that you may not be able to download the software right now. If you click on the link above and you get this pop-up window, you may need to try the page later.

  

  Please let me know if these steps solved your problem, or you receive the exact error message.

  I look forward to hear from you!

  Thank you

• network print: cannot install the printer 0x0000046a error code

  can see printer on the computer XP Home and get where Vista connect to the printer receives the error message "cannot perform complete error 0x0000046a.

  solved my problem: as much as I tried to blame Vista it turns out be a XP problem [computers XP is sharing the printer and Vista use this printer on a network connection. [Q177078 a google search] to microsoft site created IRPStackSize as non-existed in 'settings' then the value of IRPStackSize > 15.

  RESOLUTION:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  To resolve this behavior, increase the IRPStackSize value in the registry:

  1. click on Startand then click run.

  2. type regeditand then click OK.

  3. navigate to the following key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanmanServer\Parameters

  4. in the right pane, double-click the IRPStackSize value.

  NOTE: If the IRPStackSize value does not already exist, use the following procedure to create it:

  1. in the folder registry settings, click on the right pane.

  2. point to new and then click DWord value.

  3. Type IRPStackSize.

  IMPORTANT: Type "IRPStackSize" exactly as it is displayed because the value name is case-sensitive.

  5. [double click IRPStackSize] change the decimal number Base.

  6. in the value data box, type a value that is greater than the value that is listed. [default below]

  If you created the IRPStackSize value using the procedure described in step 4, the default value is 15. It is recommended that you increase the value of 3. [if the previous value was 11, type 14]

  7. close the registry editor.

  8 restart the computer.

  If the problem persists after you complete the previous procedure, try to increase the value of IRPStackSize even more. The maximum value for Windows 2000 is 50 (hex 0 x 32).

  If you are running Windows NT 4.0 and the problem persists after you complete the previous procedure, you may need to apply Windows NT Service Pack 4 or Service Pack 5.

  In Windows NT 4.0, the default value of IRPStackSize is 0x4, and the range is fr...

  In Windows NT 4.0, the default value of IRPStackSize is 0x4, and the range is from 0 x 0xC (4-12) 4. Windows NT 4.0 with Service Pack 5 or later ignores values less than 0x7.

  In Windows 2000, the default value of IRPStackSize is 15 and the range is from 11 to 50. In Windows XP, the default of IRPStackSize is 15 and the range is from 11 to 50

• Status of the printer says ERROR

  I'm sure this is an easy solution for everyone, but I can't find the answer anywhere.  My printer does not print and the ERROR status.  What can I do to get it working again?
  I checked through other responses and tried the tips to update... but no luck!  Thank you!

  Uninstall the software and drivers of the printer and remove it from the computer.

  Reinstall it according to the instructions of the manufacturer of the printer.

  If reinstalling printer and its drivers/software does not resolve the problem, contact the manufacturer of the printer.

  In addition, on their Web site, download a manual or instructions on how to reinstall/use of the printer, if you do not have the written instructions.

  See you soon. Mick Murphy - Microsoft partner

• The print spooler errors

  print spooler will not stay

  Hello

  1. could you give me the full error message?
  2. based on which application you want to print?
  3. What is the brand and the model number of your printer?
  4. are you able to print the test page?

  Method 1.
  First, let us run the fix in the article below and check.
  Problems printing and printing errors
  http://support.Microsoft.com/GP/printing_problems
   
  Method 2.
  Clear printer spooler files and activate the spooler service
  a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
  b. double click on "Printer Spooler" in the Services list.
  c. click on stop, and then click OK.
  d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.
  e. now restart the print spooler service and check.
   
  For more information and procedures, refer to the article below.
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Brother MFC-J615W prints & scans through wireless computer, but not the printer itself, error tw006 comes up, how to fix this?

  I tried for several days to get my Brother MFC-J615W do wireless...  I am able to print and scan from the computer but not scan from the device MFC-J615W

  I have:
  Brother MFC-J615W all-in-One
  Windows 7 Home Premium 64-bit
  McAfee Security Center
  Cisco Linksys e2000 router wireless
  I have installed:
  Full driver & software package of brothers website
  ScanSoft Paperport 11SE (scanning software) from the CD provided with the MFC-J615W...
  I tried to scan to Paperport and Control Center 3, but I get the following on my computer when I push the scan button on my printer itself unit...
  Control Center 3-2 errors:
  "Unable to connect to the device.  -If the device is OFF, turn on the device. -Check the I / F cable connection between the device and your computer.  -If the device works on the other post, wait until the task is completed. [TW006]
  "Unable to scan.  Please try to scan the image, once again, if the error occurs again, please reboot your computer and then try to start a new search.  (CC-205-03031f04) "
  PaperPort error: "No Scanner" the default parser is not attached.  Please attach your default scanner or click on the "Select" button to choose another scanner.
  _____________________________
  I can't do anything else in the Control Center 3 but I tried to select the scanner itself in Paperport, which is ' TWAIN: TW - Brother MFC - J615W LAN' a when I hit the scan on the printer, it defines one then the same scan by default to "WIA" error comes again.  Moreover, there is also a ' WIA: Brother MFC - J615W LAN' option in available in Paperport scanners.  The WIA option does not work when I scan in paperport, TWAIN but makes...
  _________________________________________
  I first tried to install the drivers from the CD, but it does work very well so I uninstalled and did a system restore to before that I installed everything...
  Can someone help me?
  Thank you...
  Jesse

  Hello

  1. you receive the error message only when you scan directly from the Brother MFC-J615W printer?

  2. are you able to scan or print from the computer to which the printer is connected?

  If the problem occurs only when you try directly scan at the printer, then I would suggest that you contact the support of brother about the question.

  http://www.brother-USA.com/support/

• Cannot install the printer driver - error of access denied

  I have two laptops Inspiron 1545 new running Windows 7 64-bit edition that expose that same question.  I'm trying to get an Epson color Stylus 760 working with them via a USB connection.

  When I join the starting the unit is correctly recognized, but the Epson driver does not install correctly.  If I run Windows Update, the Epson driver is listed as an optional update.  If I select and run the update, it fails with 80070005 error.

  If I go into Device Manager, the printer is listed as a printer USB that does not run as properly as there is no driver.  If I choose "put updated pilot" from the Device Manager, it downloads successfully the driver (even such as mentioned in Windows Update) and when you try to install the driver it comes back with an error "access denied."

  As mentioned previously in this case with two laptops.  In both cases I was logged under an administrator account, but not "the" administrator account.  I have enabled the administrator account and tried to install it through this, but it made no difference.  I tried also to remove and reinstall the device without success.

  The Windows 7 compatibility site said that the printer is compatible with Windows 7 64 - bit edition.

  Hi Shawn,

  In my view, that there is a driver 64 bit Windows 7 according to the guidelines of this site:
  http://www.Epson.com/cgi-bin/store/support/supAdvice.jsp?BV_UseBVCookie=Yes¬eoid=147071&type=highlights

  The Epson Stylus Color 760 is a 'built in the Windows 7 driver.

  Nevertheless, I will try your suggestion if Alan does not work.

  Kind regards

  Dan

• Color Laserjet CP2025dn "turn the printer on" error

  Too often, I try to print documents (such as boarding cards and Word documents) and nothing prints. When I run the troubleshooter, it always says that the printer is turned off! The printer is still on. I have power down (both with the button, then with the power cord). I keep getting the error. I delete the docs pending and you try to reprint. Still getting the error. Updated firmware for the printer also.

  Have you tried to uninstall and reinstall the printer using the control panel > printers and devices?

  Jim

• Problem after connecting via the USB port of the printer. Error 0x0000007a

  Recently, I plugged my HP Deskjet2360 printer via the USB port on my HP laptop (running w7 Home premium 32-bit) and can not print at all. When I try to print a test page I get the following message ' operation could not be completed. Error 0x0000007a. Operation failed.

  My usual Setup is to have my printer connected to my desktop (Windows XP Pro). My HP laptop is connected via a wireless connection to my home network, which is also connected to my desktop computer. Of course, this means that I have the office turned on to be able to print from my laptop.

  Everything worked great until I decided I'd rather have my connected printer to directly to my laptop via USB.

  When I connect the printer via the USB port on my laptop, windows installs the software and reported no problems. Yet when I try to print a test page, I get the mentioned error. When I then reconnect the printer to the desktop and try to print a test page to my network, I get exactly the same error message. The office and the printer still work fine, it's just that I can't print from my laptop.

  I uninstalled and reinstalled the printer on my laptop with the USB connection and the network, but it still does not work. The resolution of the problems on the laptop reported no problems, and the printer is set as default printer. I also get an another error msg when I click on the Preferences button in the printer properties: address of the 0x5aeba4f1 function caused a protection fault. (code 0xc0000005 exception) Some or all property pages cannot be displayed.

  
  

  The only way I found to get around this is to use windows restore and restore my laptop before the point when I connected the printer via the usb port.

  Any suggestions?

  Hello
   
  This error 0x0000007A describes the data area passed to a system call is too small. ERROR_INSUFFICIENT_BUFFER
  You can try to uninstall and reinstall printer driver and check if that helps.
   
  Here's how you can do:
   
  1. open programs and features by clicking on the Start button, clicking Control Panel, click programs, and then clicking programs and features.
  2. Select a program and then click on uninstall.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-CA/Windows7/remove-unwanted-programs-from-your-computer
   
  After you have uninstalled the driver to restart the computer, this should install it the appropriate drivers for it. You can also try to download the latest driver from the manufacturers website and install it.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1101015&lang=en&cc=us&TaskID=135&prodSeriesId=1101113&prodTypeId=18972
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  Kind regards
  Umesh P - Microsoft Support

• Unable to connect to the printer, message error "module 126 is missing."

  Original title: 126 module is missing, how can I correct this

  I Reload windows XP and when I reinstalled my printer, my computer is unable to communicate with him and a message that the 126 module is missing.  When I try to open the printer (Lexmark x 5495) put in place & diagnose I get a message that a program has been moved or deleted.
  be grateful for any help

  Hello Campbell,

  This issue can occur due to corrupted drivers, drivers incompatible, if the print spooler service is not started, because of problems with the printer and the printer, missing updates settings.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab3

  Method 2:
  If the problem persists, I suggest you install the latest printer driver on the manufacturer's Web site.

  http://support.Lexmark.com/index?page=product&segment=support&ProductCode=LEXMARK_X5495&locale=en&UserLocale=en#2

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.