Cannot access through its name WD my cloud

Similar Questions

• Windows cannot access (insert computer name) __Please check spelling or there may be a problem with your network.

  I am networking a few new machines windows 7 to an existing with both Vista and XP computers already on that network. I implemented a working network and opened ports in our McAfee Firewall that windows is recommended. However even if the older OS machines can access windows computers 7 and Windows 7 computers can access the older operating system, windows machines 7 cannot access each other.

  The computers appear on the network, but when they try to access an error message is displayed. I even tried to uninstall McAfee, but the problem persists. What is the problem?

  Hey Jessi9,

  don't know if you figured it out yet. I just installed windows 7 ultimate 64-bit 2 days ago and have been pulling my hair on the same issue. everything seems to be configured correctly, no? I ended up watching the setting of my NIC for awhile and realized the rest of my computers do not use TCP/IPv6, everything else is using v4.

  SOLUTION:

  So, go into the settings of your network card, scroll items and uncheck the "Internet Version 6 (TCP/IPv6) Protocol. Click on the Version 4-> properties-> advanced-> WINS-> you ensure that what follows is enabled, "enable NetBIOS over TCP/IP.

  your computers now appear?

  * also, I'm sorry to have proposed the previous post as an answer, I clicked on it by mistake and there is no way to undue it.

• Cisco VPN Client anything cannot access through VPN on an ASA5505 8.4

  Hello

  Completely new to Cisco ASA and the need to get this working ASAP.

  8.4 (1) ASA 5505 is the secondary FW and I need to authorize all out and block everything coming, but for the VPN clients.  Since a jerk of Cisco, I used the ASDM and it's sorcerers to make this work, which may explain my situation.

  192.168.101.0/24 is the local network

  192.168.101.5 is the IP of ASA

  192.168.101.2 is the primary FW (and the default gateway for servers, I have to access through the VPN)

  10.10.101.0/24 is the VPN IP range (this can be what you want, I'm not married to it somehow)

  My Cisco VPN Client connects to the ASA and receives 10.10.101.1 IP address, but I get no connectivity to the ASA or any other 192.168.101.x or service server (tried RDP, telnet, ping, etc.)

  Configuration file is attached.

  Help pretty please!

  Thank you.

  Did you add a route for the VPN Pool on the main firewall to the ASA?

  Best regards

  Peer

  Sent by Cisco Support technique iPad App

• How to access button object through its name of the example?

  Hello
  
  I have a button called "mybutton" and on a certain range (No. 10), I wrote this code in the action script:
  
  MyButton.Height = 500;
  
  It does not work and the button size remains the same. Looks like I can't access button like that!
  I want it's on a certain range I want to increase the height of the button. How can I do this?

  Thank you guys! :)
  I used _height and it worked.

• Cannot access through a browser using the IPS 192.168.128.101 and 192.168.128.102 PowerVault 3600f

  Hi all

  I confronted strange problem during the installation of MD3600f I have connected a point to MD and assign 192.168.128.102 to my laptop. I did ping 192.168.128.101 (cont0) but could not access via a browser. I want to access controller in the command edit IP address. Pls advise.

  Rufat

  Download the latest version of the resource DVD.

  A Dell to look all this is en.community.dell.com/.../4234.dell-powervault-md-downloads.aspx. You will want to get this DVD resources 4.1.0.88.

• Cannot access through desktop remote after replacing the hard drive

  After replacing the hard drive, I can't access the computer via desktop remotely.  running Windows 7.  Settings of remote desktop access.  The firewall is disabled.

  Hello

  I appreciate the efforts that you put to publish the query on this forum.

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Please do not hesitate to contact us if you have other questions related to Windows.

• Cannot access the settings menu in creative cloud app.

  I recently received an automatic update to CC2015. Once it is installed, I see the CC app at first pitch up (before the update he reduced) with wheel constantly spinning. I tried several solutions I found online, including the removal of the content from the OOBE folder. After that, the creative application Cloud seemed to load and work as is should (I could update my applications), and there was no turning endless wheel.

  However, I did not want it appears whenever I restart windows. I soon discovered that, when I try to open the settings menu, there is no response. No matter how much I click in the area of the gear icon bit, nothing happens. Ideas on how to proceed?

  WIn7 X 64 professional

  Photographer subscription

  Uninstall your application of office cc, own by the use of the Adobe Creative Cloud cleaning tool to solve installation problems , and then reinstall your cc app.

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• "Cannot access working group on some computers running XP - ' < name of working group > is not accessible. You might not have permission to use this network resource ".

  I have a home with 4 PC network - one of them is running Windows 7 Home Premium (with homegroup disabled) and others running XP Pro.  The XP machines is called 'Server' and the server and the computer services browser running and set to automatic.  Two other computers, called "Notebook" and "Dell", as well as the machine Windows 7 have no file and sharing printers enabled and have specifically the Server service is disabled.

  My problem is that one of the two XP client machines cannot access the working group.  Let me be clear about this: I open Windows Explorer and click on "My network places"-> "entire network"-> "Microsoft Windows network", there is then a second 5-10 break and then my workgroup name is displayed.  When I click on the name of the Working Group, there is another ~ 10 second pause and then I get a message that says error " is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have permissions.  A device attached to the system does not work. ', where is the name of my group to work for other days, after some of the computers are restarted, I find that the XP client has absolutely no problem with that; but the other now has this same problem.  In other words, the problem going on between two XP clients.

  Let's analyze: I have Windows on all PC firewall and any other firewall program.  I tried to disable the Windows Firewall and my anti-virus (temporarily), program without effect.  This may not be a problem with the way I've set up my actions because the error occurs when I try to click on the task force rather than a shared resource.  This cannot be a problem with a specific XP client because at different times, each of the two PCs worked perfectly without any changes of configuration made between the two.  It could be a problem with the server settings; but I don't see what it could be.  I tried editing

  HKLM\System\CurrentControlSet\Services\LanmanServer\Parameters and changing

  IRPStackSize from 21 to 45, then 50.  I also tried to change the size of 2 to 3.  I restarted the server and the client XP and had no effect.

  I don't have the same account of user configured on all three machines.  However, this cannot be the issue because the problem occurs when I click on the task force, before the server name is still displayed.  In addition, each of these two XP clients have connected with their existing user accounts at times.

  I tried the Wizzard of configuration network running on all four machines, without effect.  I tried a lot of things, most of which I can't remember.  I'm at the end of my mind.  Help, please.

  JW,

  Thanks for the continued support.

  By the advice of IPCONFIG, I looked at the registry for all computers and found EnableProxy wasn't there.  According to the documentation by default to 0, which is what we want.  However, I added it to all the computers and left it set to 0 and restarted the computer.  The node Type still said 'unknown '.

  Thanks for the info on the master browser.

  The ""Network location cannot be reached"when you access actions."
  the article talks about Windows 2003 Server and none of the symptoms mentioned relate to this situation.

  The "network adapter advanced troubleshooting for Windows workstations" is on hardware troubleshooting.  I think that it's probably not a problem because the computer has no trouble to access the internet, which is not possible if the card network are not working.

  I went through the AutoCorrect entry to reset the TCP/IP stack, even if the article describes symptoms such as difficulty to access the internet...  And...  THIS MARKET!

  After re-booting, the PC that was in trouble can now access the working group.  All other PCs can always too (have not tried to restart all over again).  AWESOME!  I can't thank you enough!

  I re-post if the syptoms happen; but for now, we can consider this issue RESOLVED.

  Thank you 1 million,

  Adam

• Cannot access my router through the Explorer configuration page

  I need to do a port forwarding on my router. My internet connection works (even if she falls occasionally) and I can also connect to other computers on my network. However, I cannot access my router through IE page (I get a message saying: page not found). When I go see the map in the options Vista network, the router is not displayed and when I clikc on "See the whole map", I get a message saying that Windows cannot detect any computer or devices.

  My connection to the router is connected, and it is a WRT54G Lyinksys. Any ideas how I can see my router or go to its page layout? Another thing, I went to CMD and the ping command returns a default gateway 192.168.1.1, which is what I have my using the address of the webb page.

  Thanks for any help.

  Hi JBHPUser,
  
  (a) other router configuration page, you are able to access other Web sites?
   
  (b) what operating system and Internet Explorer version do you use?
   
  This article can be very useful.
   
  You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".
  http://support.Microsoft.com/kb/956196
   
  You can also access these links, which is primarily for Windows Vista, but are also applies to Windows 7
   
  
  Solve problems with computers not appearing is not in the network map
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map
   
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
   
   
  
  Aziz Nadeem - Microsoft Support

• We have creative cloud for business our creative cloud for the client company cannot access the plan portfolio Typekit fonts

  We have Creative Cloud for businesses.

  Our creative cloud for the client company (= users) cannot access the Typekit portfolio plan, only the free fonts.

  Best regards

  Matti Makijarvi

  [email protected]

  We had it operating forest offf CC and Typekit user accounts, delete this user of dashboard, creating a new email account for the user, inviting through this e-mail as a new user.

  Now, she has access to the Typekit PF regime.

  /Matti

• Cannot access remote through Windows Live Messenger

  During the years I helped my mother by remote access through Windows Live Messenger, but in recent days the small program that usually appears which shows two computers, try to connect are missing and I get the error message cannot display the page. If anyone has had the same problem and how solved you this problem?

  Submit all Live queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• Cannot access internet without going through "Online Help & Support." ("Windows cannot access the specified path. You cannot ot have permission.)

  Problems: Access to the internet.    2. right of PC, for example, clock, Favorites, etc. does not appear on the screen while booting.

  3. cannot access the Micro password

  Error message: «Windows cannot access the path specified...» »

  When I'm online through the icon help & Support, still cannot access all the other icons; needs access to sites through links.

  First of all, there is problem when I played the game on 'brightness (MySpace link); PC seems to crash and the problem has continued since then.

  I have no idea what to do and I'm a bit of a novice.  In addition, have physical difficulties which slows me down or interferes with the ability to work through problems.

  Applications and links of Facebook can be very dangerous. Please start with the basics to ensure that you are working from a clean base. You will need to obtain the tools of a different, known-clean computer with access to the Internet and put them on a USB stick to transfer to the affected machine.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.

  MS - MVP - Elephant Boy computers - don't panic!

• Network error mystery - Windows cannot access \\server\users when you use the netbios name, but works fine when you use the full domain name.

  Hi all:

  Mystery - I have a Win 7 work company that cannot access a particular action.  I get the following error-"you are not allowed to access \\server\users.  Contact your network administrator to request access.  However, these users can access these files successfully on other computers, and also if I use the fqdn or the IP instead of the "netbios name server", it connects successfully.

  Environment:

  -Workstation and server at the same time in the same AD Windows 2008 r2 domain.

  -All users, admin and non admin, cannot access this share when connecting to this computer only.

  -ACCESS to the other actions on the same server, as well as actions on other servers.

  -The biggest mystery to me - if I type the FQDN, \\server.domain.local\users, it works!  What the?

  I tried:

  -Deletion of the domain and add it again, no improvement.

  -Check Event Viewer, nothing jumps (not red or yellow).

  -Enabled auditing for access to objects on the server, it does not show a failure in the security event log.

  -Turn off the firewall of my computer.

  -UN-share and re - share the directory.

  -Give everyone full control (the fact that it works well with de facto authorities a little full domain name, a candidate little likely, but I have an open mind).

  For anyone wishing to offer their 'help' by asking me to make some sort of workaround as re - install windows or turn off netbios or use only of the full domain name here on out or whatever, please Don ' t bother.  I appreciate your help, but I am quite able to reinstall and I'm not interested unique hacks that affect this otherwise network well managed, I'm looking for a solution that will allow me to save time and is a long-term solution.

  In my view, that a key point here maybe I can connect successfully using \\server.domain.local\users, but not \\server\users.  Someone at - it some thoughts?

  In DNS server of youe, go to the area in question and in the use of select search before Wins wins tab and enter the address of your wins server if you have one. If not, install one.

• What opening of database Service of Cloud Computing console receiveing "the user role cannot access the Cloud database Service" message and see no service. Why?

  What opening of database Service of Cloud Computing console receiveing "the user role cannot access the Cloud database Service" message and see no service. Why?

  Thank you in advance.

  Try now