Cannot add raw lun if the host is connected to vCenter

Similar Questions

• I am maing a movie with windows movie maker and you cannot add a song for the end credits. Whenever I get the song imported the system stops... Help!

  I'm doing a movie with windows movie maker and cannot add a song for the end credits. Whenever I get the song imported the system stops... Help!

  I'm doing a movie with windows movie maker and cannot add a song for the end credits. Whenever I get the song imported the system stops... Help!

  ===============================
  If a music file Movie Maker crashes
  in a format that is not compatible. If you convert
  the file to the format of .wma before importing, you
  can have a better result.

  The converter below might be helpful to try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your audio clips on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck.
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• "You cannot add this location to the gallery.

  Windows Photo Gallery doesn't let me add pictures to the gallery. All images are currently in the folder 'Picture' and are 95% of the .jpg files, some are .pspimage files (Paint Shop Pro) the exact wording is: "You cannot add this location to the Gallery" this folder or one of its parent folders is considered a system folder or is considered as a system folder or marked as hidden. Its recommended that you move your pictures in the pictures folder or to a different folder.

  And can you tell me the difference between the Windows Gallery and Windows Live Gallery? (Incidentally, my photos appear in the Gallery Live.)

  Windows Photo Gallery doesn't let me add pictures to the gallery. All images are currently in the folder 'Picture' and are 95% of the .jpg files, some are .pspimage files (Paint Shop Pro) the exact wording is: "You cannot add this location to the Gallery" this folder or one of its parent folders is considered a system folder or is considered as a system folder or marked as hidden. Its recommended that you move your pictures in the pictures folder or to a different folder.

  And can you tell me the difference between the Windows Gallery and Windows Live Gallery? (Incidentally, my photos appear in the Gallery Live.)

  ========================================
  Windows Live Photo Gallery is an improved version of the
  Windows Photo Gallery... you just use one or the other.

  Photo Gallery Windows comes with the operating system... Windows Live
  Photo Gallery must be downloaded and installed.

  Take a look at the following link:

  Windows Vista-
  Windows FAQ Photo Gallery
  http://blogs.msdn.com/PIX/pages/FAQ.aspx

  (Library vs Live Photo Gallery)

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or reboot the machine.

  Hello
  After upgrading to windows 7 Home premium 64 bit vista family premium 64-bit, I expected to be able to connect my EPSON Stylus D68 printer on my laptop and leave immediately. However, when I tried to do this installation constantly failed.  Therefore, I went to the manual add the printer option in the menu devices and printers. However I met this error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or restart the machine,"after reviewing the existing forums on the issue, I tried to restart the services option. However, the restart option has been obscured and when I just tried to start then I met an other error message: "windows could not start the spooler on the local computer service, error 1053: service has failed to demand launch or control in a timely. more when I click Properties to the spooler in the description it says failure to read the description. error code: 1813. This is all very frustrating for someone who just wants to add a printer to his laptop computer. can someone please? because I am all of these ideas.
  Thanks in advance,
  Chris.

  Try runing the file system Checker to check the alteration of system files - 1 Option to follow in the folliwng link:

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

• In MS SQL Server Management Studio, cannot add a port to the Windows Firewall exceptions list.

  I am trying to debug a sql script in the debugger to MS SQL Server 2008 and I received a message saying 'could not configure the Windows Firewall. Cannot add a port to the Windows Firewall exceptions list. "Use the Panle controls to manually configure Windows Firewall.

  Hi GusGomez,

  The question you have posted is related to the server and would be better suited in the Technet forums. Please visit the link below to find a community that will support what ask you
  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer
   
  Hope this information helps.

• A general error occurred: could not connect with the password of administrator of vim cannot configure VIM account on the host

  Community salvation.

  Story: I was called to look at the configuration of vSphere for a customer. When I started looking, I noticed several problems in the environment of the person who has put in place initially. I've been noting but have done nothing to fix these up to the...

  A question that I've seen is that the server vSphere does not apper communicate properly on ESX 3.5 servers. The error message is similar to a post on this forum ( http://communities.vmware.com/message/1450789?tstart=0) however the same method of solution did not work.

  Currently I have two ESX hosts connected to a console vSphere. The Console displays the disconnected hosts and the error points to the problems with the VPXUSER account. I found

  I searched and found several articles with similar questions, so I chose a course of action

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1007132

  http://communities.VMware.com/message/1168241

  As a note - vSphere client connections toESX welcomes also directly works very well - don't show no problems and everything seems fine.

  So - my first actions were to disconnect and reconnect one of the hosts.  The operation failed with the error "a general error has occurred: unable to connect with the password of administrator of vim cannot configure VIM account on the host. After that, I followed the elimination of the VPXUSER process, restarted the agents and you reconnect the server for vSphere - to the same result. I then deleted the ESX host, removed the VPXUSER, restarted the agents and added that the host ESX back once again - but no change - the same exact error message. I don't see the VPXUSER ID are re-created by this process - so I guess that ESX and vSphere should know the ID and the password.

  Nothing shows up in the var for this - but one of the articles above explains that as a result of the use of the PAM modules.

  Just for fun, I also tried using the ROOT password and reallowing ROOT to connect via SSH - but I got the same failures. I also tried lifting the VPXUSER ID privleges but - same questions.

  If - goes here - any ideas? I can give other details or screen caputres

  ESX3:

  #%PAM-1.0

  1. Automatically generated by esxcfg-auth

  /lib/security/$ISA/pam_unix.so account required

  AUTH required /lib/security/$ISA/pam_env.so

  AUTH sufficient /lib/security/$ISA/pam_unix.so likeauth nullok

  AUTH required /lib/security/$ISA/pam_deny.so

  attempts at password required /lib/security/$ISA/pam_cracklib.so = 3

  shadow md5 password sufficient /lib/security/$ISA/pam_unix.so nullok use_authtok

  /lib/security/$ISA/pam_deny.so password required

  session required /lib/security/$ISA/pam_limits.so

  session required /lib/security/$ISA/pam_unix.so

  ESX4

  #%PAM-1.0

  account required pam_per_user.so /etc/pam.d/login.map

  AUTH required pam_per_user.so /etc/pam.d/login.map

  /etc/pam.d/login.map pam_per_user.so password required

  /etc/pam.d/login.map pam_per_user.so sign in required

  -KjB

• How can I add my laptop to the network and connect to the internet as well

  I have internet access on my computer at home, the ipod, the ipad and iphone.  How can I add my laptop to the network and connect to the internet as well?

  Hello

  I suggest you to refer to the following Microsoft article and check if it helps.

  Add a device or computer to a network:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-device-or-computer-to-a-network

  For more information, see the following Microsoft article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-you-need-to-set-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows/explore/home-networking

  Hope the information is useful.

• ' Could not connect: unable to connect to the host localhost: connection refused "on variuos orders

  On ESX 4.0.0 Update 1.

  When I run a command like "vim-cmd/hostsvc/hostsummary | "grep inMaintenanceMode" or vimsh - n - e/hostsvc/maintenance_mode_enter ' / 'vimsh - n - e
  "/ hostsvc/maintenance_mode_exit" all returned the same error message ' could not connect: unable to connect to the host localhost: connection refused.

  I checked the checked the file /etc/resolv.conf Bed & Breakfast.

  I am able to ssh on the server as well as the use of WinSCP without any problem.

  I can connect with the VI Client also without problem.

  Any ideas?

  The problem has been resolved.

  The fix:

  =====

  # vimsh-e - n/hostsvc/hostsummary | grep inMaintenanceMode

  Using the libcrypto, version 90809F

  inMaintenanceMode = false,

  # vim-cmd/hostsvc/hostsummary | grep inMaintenanceMode

  inMaintenanceMode = false,

  Rationality for the problem is these commands (vim - FCM or vimsh) were unable to communicate due to lack of xinetd process.

  # ps - ef | grep-i xinet

  root 11527 25978 0 04:30 pts/0 00:00:00 grep-i xinet

  # service xinetd restart

  #

  # Service xinetd status

  #

  # service xinetd start

  # Service xinetd status

  # /etc/init.d/xinetd ls

  /etc/init.d/xinetd

  / * But NETWORK seems to be normal on the server * /.

  # cat /etc/resolv.conf

  nameserver 172.26.6.21

  nameserver 172.25.6.51

  # ifconfig

  Lo encap:Local Loopback link

  INET addr:127.0.0.1 mask: 255.0.0.0

  RACE of LOOPING 16436 Metric: 1

  Dropped packets: 6053620 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 6053620 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:0

  RX bytes: 2021352939 (1.8 GiB) TX bytes: 2021352939 (1.8 GiB)

  ppp0 link encap:Point - to-Point Protocol

  INET-addr:164.152.87.72 P - t - P:164.152.87.64 mask: 255.255.255.255

  Up POINTOPOINT RUNNING NOARP MULTICAST metric MTU:1500: 1

  Fall of RX packets: 208 errors: 2:0 overruns: 0 frame: 0

  Dropped packets TX: 205 errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:3

  RX bytes: 18165 (17.7 KiB) TX bytes: 22314 (21.7 KiB)

  vmnic100200 Link encap HWaddr 00: 1B: 21:6 A: C9:C4

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 1383869 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 1382815 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 90351869 (86.1 MiB) TX bytes: 92106912 (87.8 MiB)

  Interruption: 97

  vmnic100201 Link encap HWaddr 00: 1B: 21:6 A: C9:C5

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 24239456 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 23905751 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 2078777971 (1.9 GiB) TX bytes: 2226266024 (2.0 GiB)

  Interruption: 113

  vmnic100600 Link encap HWaddr 00:25:5 C: 2: 75:30

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 13076343 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 5226061 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 1292112365 (1.2 GiB) TX bytes: 1224021381 (1.1 GiB)

  Interruption: 129

  vmnic100601 Link encap HWaddr 00:25:5 C: 2: 75:31

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 819469 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 770101 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 56287946 (53.6 MiB) TX bytes: 52499576 (50.0 MiB)

  Interruption: 137

  vmnic110200 Link encap HWaddr 00: 1B: 21:6 A: CA:44

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 1774795 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 1681079 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 142435399 (135.8 MiB) TX bytes: 135079293 (128.8 MiB)

  Interruption: 145

  vmnic110201 Link encap HWaddr 00: 1B: 21:6 A: CA:45

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 21079616 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 20688606 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 1859632344 (1.7 GiB) TX bytes: 1852761835 (1.7 GiB)

  Interruption: 161

  vmnic110600 Link encap HWaddr 00:25:5 C: 2: 75:32

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 39205375 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 21339531 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 32420064542 (30.1 GiB) TX bytes: 3709579479 (3.4 GiB)

  Interruption: 177

  vmnic110601 Link encap HWaddr 00:25:5 C: 2: 75:33

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 2922150 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 2110634 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 398811808 (380.3 MiB) TX bytes: 245899848 (234.5 MiB)

  Interruption: 185

  vswif0 Link encap HWaddr 00:50:56:41:76:EB

  INET addr:172.26.6.13 Bcast:172.26.6.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 109779 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 23715 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 10137604 (9,6 MiB) TX bytes: 21716347 (20.7 MiB)

  vswif1 Link encap HWaddr 00:50:56:40:30:F7

  INET addr:172.26.7.11 Bcast:172.26.7.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 36515 errors: 0:0 overruns: 0 frame: 0

  Dropped TX packets: 4 errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 3702390 (3,5 Mio) TX bytes: 168 (168,0 b)

  vswif2 Link encap HWaddr 00:50:56:4 A: DF:1 B

  INET addr:172.26.8.11 Bcast:172.26.8.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 20525 errors: 0:0 overruns: 0 frame: 0

  Dropped packets TX: 6 errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 2742990 (2.6 MiB) TX bytes: 252 (252.0 b)

  vswif3 Link encap HWaddr 00:50:56:4E:1E:24

  INET addr:172.26.9.12 Bcast:172.26.9.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 26408 errors: 0:0 overruns: 0 frame: 0

  Dropped TX packets: 4 errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 3095970 (2.9 MiB) TX bytes: 168 (168,0 b)

  # / opt/ft/bin/ftsmaint lsVnd

  Virtual network device (VND) groups

  ===================================

  Status of group name

  --------------------------

  vSwitch0 ONLINE

  vSwitch1 ONLINE

  vSwitch2 ONLINE

  vSwitch3 ONLINE

  Members of the Group of VND

  =================

  Link Group Name status Interface link state speed

  --------------------------------------------------------------------------

  vmnic100200 vSwitch2 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic100201 vSwitch3 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic100600 vSwitch0 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic100601 vSwitch1 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic110200 vSwitch2 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic110201 vSwitch3 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic110600 vSwitch0 DUPLEX UP LINK 1000 Mb/s-FD

  vmnic110601 vSwitch1 DUPLEX UP LINK

  1000 mb/s-FD

  / * Further consideration on the problem of starting XINETD * /.

  Further examination shows that the xinetd is unable to start because he believed NETWORK unavailable.

  Starting xinetd uses the contents of the sysconfig file where there was an entry incorrect "NETWORKINcesv = yes". We have corrected this entry and restarted xinetd process.

  After this correction, xinetd is restarted, the system seems to be normal.

  # cat sysconfig

  NETWORKINcesv = yes

  HOSTNAME = Server.test .net

  GATEWAY = 172.26.6.1

  IPV6_AUTOCONF = no

  NETWORKING_IPV6 = no

  #

  # cat sysconfig

  Networking = yes

  HOSTNAME = Server.test .net

  GATEWAY = 172.26.6.1

  IPV6_AUTOCONF = no

  NETWORKING_IPV6 = no

  # ps - ef | grep-i xinet

  root 27977 25978 0 04:41 pts/0 00:00:00 grep-i xinet

  # service xinetd start

  [From xinetd: OK]

  # ps - ef | grep-i xinet

  root 28119 1 0 04:41?        00:00:00 xinetd - stayalive - pidfile /var/run/xinetd.pid

  root 28239 25978 0 04:42 pts/0 00:00:00 grep-i xinet

  #

  # service xinetd restart

  [Judgment of xinetd: OK]

  [From xinetd: OK]

  # vim-cmd/hostsvc/hostsummary | grep inMaintenanceMode

  inMaintenanceMode = false,

  # vimsh-e - n/hostsvc/hostsummary | grep inMaintenanceMode

  Using the libcrypto, version 90809F

  inMaintenanceMode = false,

  #

• Cannot add VMFS datastore to ESXi host

  Hi all

  I have a problem with the CF 1 logical unit number which can be seen as a device through several paths on all 10 hosts in a cluster, but it appear as a data store VMFS on 6 of the hosts. Other LUNS of the same Bay appear correctly on all hosts. 10 guests see the LUN with the same LUN ID and all hosts are identical regarding the version of ESXi (5.0 Update 2), HBA and firmware models.

  On the 4 hosts who can see the device but not the VMFS data store, it seems that he sees the LUN as a snapshot: 'list of snapshot storage vmfs esxcli' translates into:

  4f5e5cbb-a87cd2c6-86e9-d8d385f98034
  Volume name: LUN101_SAS2
  VMFS UUID: 4f5e5cbb-a87cd2c6-86e9-d8d385f98034
  Can mount: true
  Reason of mountability-United Nations:
  Can will: false
  Reason for non-resignaturability: the volume is actively used
  County of measure pending: 1

  The UUID VMFS above matches the UUID VMFS seen on 6 guests who can see the VMFS data store.

  When I try to use 'Add storage', the device appears with a lambel VMFS: LUN101_SAS2(head). I don't know why (head) was added to the label of VMFS. Oscreen n the following signature to keep 'existing' and "Assign a new signature" options are grayed out. The only option is "Disc Format. I need to keep the existing signature because it run virtual machines that have their files .vmx and hard on this LUN.

  Would the fact that I have virtual machines running on this LUN, I cannot choose the option to "keep the existing signature?

  I need to Storage vMotion these virtual machines to a different LUN before I add the VMFS datastore to 4 guests?

  TIA

  Hey RoscoT;

  Try the following command

  #esxcfg - volume - l

  This should show the volume

  To constantly increase the volume, use esxcfg-volume - M followed of the UUID or volume name

  Concerning

  one

• Try to use mapped raw LUNs to the new drive, but it is grayed out.

  I have a volume set up on my SAN for my host Dataserver and when I look at the configuration for the storage card from the host (iSCSI adapter SW) it lists the unit, so I know that he can see it.

  The problem is when I go to the Dataserver VM and try to add a new hard drive, it won't let me select "maps Raw Lun. I missed a step in the development of this device?

  To ensure that this RDM file is pointing to the correct LUN, run:

  vmkfstools q - /vmfs/volumes/.../DATASERVER_VM1_4.vmdk

  Usually you would remove a RDM disk by selecting "remove disc" when you remove it from the virtual machine (this removes only files hard and not the data on the LUN itself). However, it should work just delete the two files - the vocation and the associated descriptor file - browser data store. The data browser store will only show the name of the desctiptor file.

  If you can afford a few outages, power off the virtual computer, re - join the mapping file and then remove it by selecting meanings reported "remove disc"

  André

  PS: No host reboot is required for this action.

• 5.5.5 Advanced VDP cannot add a license to a host

  I downloaded and installed the eval mainly to test the functionality of replication of 60 days.

  I have the license provided by vmware and added during the installation/configuration

  Enter the web client then the POS and the configuration tab.

  This page is supposed to have an advanced POS tab or link to go somewhere to add hosts to the allowed list.

  This facility does not have the Advanced tab.

  the configuration has confirmed the version and the mode is advanced vdp as shown on the left side of the configuration page

  Adds the License Manager to license in vcenter (device 5.5)

  I'm stuck, cannot do all the backups until I have a license to host.

  any suggestions?

  Thank you

  finish by closing the vcenter and all 5 devices of vdp

  interesting thing to note is that the element of Data Protection of vSphere in the left menu of the web client disappears when there is no POS device running.

  all brought to the top entered the advanced VDP connection and now the advanced license option is present and functional.  don't have an answer for this, but at least I can with the eval.

  at the same time, I was looking into using high processor on the device of vcenter 5.5 and found that it is POS devices.

  without any POS running host cpu is 40%, started 2 and it went to about 50%, 60 plus 2% more then in the last 4 hours, he established at 40%

  before complete stop of all POS and vcenter vc ran 90 percent even after a reboot of the Victoria Cross.  Looks like they have sometimes a few problems to agree, but a new start for everyone seems to get by.

• Cannot add Raw Device Mapping as hard drive

  Hello

  We have 2 Server 2008 Virtual Machines (which are clustered) that make up a Cluster 2 node x.  The ESX servers that organize these VMs (ESX Server different on each) are connected to a San.  When I place these two VMs, I could add a hard drive "Raw Device Mapping" without problem - he could see data warehouses, I had Setup on the SAN.  However when I try to add a hard drive "Raw Device Mapping" on the 2 new virtual machines, the only options I have are:

  -Create a new virtual disk

  -Use an existing virtual disk

  Any ideas why Raw Device Mappings is greyed out?

  You add the second node RDM disk by selecting "use an existing virtual disk".  The ability to add RAW devices is only available for RAW LUN which has already been mapped to a virtual machine.

  When you add the ROW to the first node, a mapping for the RDM vmdk file was created. It's that developed from the second node.

  See http://kb.vmware.com/kb/1004617 for more details.

  André

• Cannot add album art in the windows media player 11

  I used to put album art on mp3 manually files with advanced tag editor and I had no problem, but all of a sudden (I won't change anything in the configuration) it stopped, not even a message... When I drag any image of the album (which is not playing), it always creates the folder.jpg and albumartsmall.jpg files but it shows thumbnails of coverage associated with each file, and when I go again to tag editor advanced is as I din't put the lid in it, so it shows the coverage only for the information of the album but not for every song of it and I'd like to see the covers in the solution once again Explorer. I don't have the media player connected to the internet, but this is not the problem... Any suggestions?

  Hi mariana9,

  You can try to rebuild the Windows media player library and check. I suggest you follow the steps mentioned in the article below.

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

  You can also check the following links for more information:

  Add or edit media information in Windows Media Player

  Information about the media in Windows Media Player: frequently asked questions

  Hope this information is useful.

• Cannot add new device using the USB port

  Cannot add new device through usb ports, the cable is peripheral poering, not listed is not in the menu

  Thread merged:

  try to use the scanner to photo but can not add new device via USB, cable powers the device, but the device not listed is not in the menu

  Hello

  1. do you get an error message when you add a new device?

  2. What do you mean by "the cable is peripheral poering"?

  3 are. what menu you referring?

  4. is it the problem persists with a particular device?

  5. were there any changes (hardware or software) to the computer before the show?

  Reply with answers to help you in a better way.

  Click on the below mentioned link to get an idea on how to ask for suggestions in this forum.

  Suggestions for a question on the help forums

• vCenter 6 in a WAN configuration - cannot add 6.0.0 ESXi host, is stuck at 80%

  All,

  I tried a day now to find a solution to this. We have 6 break-in LAN1 vcenter, connect a host ESXi LAN1 and ESXi another I LAN2. LAN1 and LAN2 are connected with IPsec. Resolution of DNS works both ways, as far as I can tell and all ports are open between the hosts. We had everything up and running but due to hardware failure, needed to replace the ESXi I LAN2.

  With the new host in place, I am not able to add to vcenter. I tried to use the name and IP address. I even downgraded to a previous version of ESXi, but all does not work, stuck at 80% progress bar. Then the message "Failed to contact the host specified." Checking the logs I see that vcenter is actually connected to ESXi in LAN2 and creating the account vpxuser to communication works in one way at least.

  I remember I had the problems of implementation of the previous host in LAN2, but all of a sudden it worked simply.

  Someone at - he had no idea where to start looking?

  / Mattias

  Make sure you have the MTU settings assign identical values everywhere.