5.5.5 Advanced VDP cannot add a license to a host

Similar Questions

• Cannot add free license to the ESXi Server

  I have an ESXi host 4.1 I can't add my license key for free also.  I installed this on 8 other identical servers, but this one gives me the penalty.

  If I go to configuration > license I see the following:

  Product: Assessment 1 host peer Mode
  License key: XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
  Expires: expired

  Product features:
  Up to 8 - way virtual SMP
  for ESX Server vCenter agent
  vStorage API
  VMsafe
  dvFilter
  VMware HA
  HW hot pluggable virtual
  vMotion
  VMware FT
  Data recovery
  vShield Zones
  VMware DRS
  Storage vMotion
  MPIO / third-party Multi-Pathing
  vNetwork Distributed Switch
  Profiles of the host
  Remote virtual serial Port concentrator
  Storage i/o control
  dpvmotion
  Vaai

  The strange thing is that the button "Edit" in the upper right is grey.  It is not a link on which I can click.  What I am doing wrong?

  Yes.  See, http://kb.vmware.com/kb/1003490

• Cannot add VMFS datastore to ESXi host

  Hi all

  I have a problem with the CF 1 logical unit number which can be seen as a device through several paths on all 10 hosts in a cluster, but it appear as a data store VMFS on 6 of the hosts. Other LUNS of the same Bay appear correctly on all hosts. 10 guests see the LUN with the same LUN ID and all hosts are identical regarding the version of ESXi (5.0 Update 2), HBA and firmware models.

  On the 4 hosts who can see the device but not the VMFS data store, it seems that he sees the LUN as a snapshot: 'list of snapshot storage vmfs esxcli' translates into:

  4f5e5cbb-a87cd2c6-86e9-d8d385f98034
  Volume name: LUN101_SAS2
  VMFS UUID: 4f5e5cbb-a87cd2c6-86e9-d8d385f98034
  Can mount: true
  Reason of mountability-United Nations:
  Can will: false
  Reason for non-resignaturability: the volume is actively used
  County of measure pending: 1

  The UUID VMFS above matches the UUID VMFS seen on 6 guests who can see the VMFS data store.

  When I try to use 'Add storage', the device appears with a lambel VMFS: LUN101_SAS2(head). I don't know why (head) was added to the label of VMFS. Oscreen n the following signature to keep 'existing' and "Assign a new signature" options are grayed out. The only option is "Disc Format. I need to keep the existing signature because it run virtual machines that have their files .vmx and hard on this LUN.

  Would the fact that I have virtual machines running on this LUN, I cannot choose the option to "keep the existing signature?

  I need to Storage vMotion these virtual machines to a different LUN before I add the VMFS datastore to 4 guests?

  TIA

  Hey RoscoT;

  Try the following command

  #esxcfg - volume - l

  This should show the volume

  To constantly increase the volume, use esxcfg-volume - M followed of the UUID or volume name

  Concerning

  one

• Cannot add the license key after ESXi 4.0 set to level

  All the

  AFTER an upgrade successful ESXi 3.5 to ESXi 4.0. I can't add my basic features free license key. Before the upgrade, that I was NOT in trial mode, I had already entered the license key for the basic version of esxi 3.5 several months ago, and things have been fine. Now, after the 4.0 update, I am in trial mode - only now, I'm unable to enter a license anywhere key. If I go into the tab Configuration & gt; Software & gt; A license of features, it is said: evaluation Mode and then if I click on edit - my options are: rename, delete and parameters of the customer, with the first two options are grayed out and cannot. I have the key ESXi 4.0 that I got when I downloaded 4.0 but just can't get anywhere to exit assessment!

  Any ideas?

  Thank you

  There is an another "Edit", you must click on.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• Cannot add a license or a new user

  On manage my team.

  

  I get this.

  There is no account manager.  There is no phone number to call.  There is no cat.  There is no way to open a Support Ticket for assistance.

  What it is: a circle without end of the Adobe website without ever getting whatever this is resolved; and the EXTREME FRUSTRATION.  I don't have time to waste on a BS site then sends me in endless circles.

  According to manage my account, the last payment was on 28 April 2016, then how can there be a payment problem to solve?

  

  All I want to do is add another user and get them to go with Adobe.  I have now lost nearly 5 hours in 3-4 different days trying to understand this.  Maybe, just maybe, I'll get an answer to this by someone from Adobe that will help you.  I won't hold my breath on this point, although...

  Hello

  Please follow this link to get the support of phone/chat for CC for teams - Contact customer - cloud creative teams

  Thank you

  Bev

• vCenter 6 in a WAN configuration - cannot add 6.0.0 ESXi host, is stuck at 80%

  All,

  I tried a day now to find a solution to this. We have 6 break-in LAN1 vcenter, connect a host ESXi LAN1 and ESXi another I LAN2. LAN1 and LAN2 are connected with IPsec. Resolution of DNS works both ways, as far as I can tell and all ports are open between the hosts. We had everything up and running but due to hardware failure, needed to replace the ESXi I LAN2.

  With the new host in place, I am not able to add to vcenter. I tried to use the name and IP address. I even downgraded to a previous version of ESXi, but all does not work, stuck at 80% progress bar. Then the message "Failed to contact the host specified." Checking the logs I see that vcenter is actually connected to ESXi in LAN2 and creating the account vpxuser to communication works in one way at least.

  I remember I had the problems of implementation of the previous host in LAN2, but all of a sudden it worked simply.

  Someone at - he had no idea where to start looking?

  / Mattias

  Make sure you have the MTU settings assign identical values everywhere.

• Cannot add the ESX 6.0 host to vCenter Server 6.0

  OK, I'm testing laboratory a vsan 6.0 cluster.

  I have my running 6.0.0 esx hosts and vcenter server is 6.0.0 also.

  I have the services platform on a virtual machine and vcenter on another. I was able to create a data center, then a cluster below.

  Then I went to try to add a host to my group and I get this error...

  Failed to contact the specified host (hostname\IP). The host may not be available on the network, may have a network configuration problem, or that the management on this host services may not respond.

  
  

  Per this KB: KB VMware: Add a host VMware ESXi/ESX from VMware vCenter Server fails

  
  

  I confirmed that my vcenter server and platform services server can see all esx hosts. From the vcenter server, it can ping the host esx and PuTTY can access all of them. I even installed the client and it can connect to all esx hosts. I used the netbios name, IP and FULL domain name and they all work.

  I have only a single subnet, so this isn't a problem. DNS resolution works in all areas of both sides, vcenter esx hosts and host esx to vcenter.

  
  

  I am quite puzzled.
  

  
  

  
  

  OK, after working with VMware on this issue, I think that I thought about it.

  All my hosts are DL360 G6 servers.

  My hosts are run the same build «VMware-ESXi-6.0.0-2494585-HP-600.9.2.38-Mar2015.iso» ESX Downloaded from HP.

  All buildings are in trial mode.

  After placing a call to VMware, they had me build some ESX VM, the services of the platform and the vcenter VM on an ESX host. We suspended because it took all day to go upward.

  Once I woke up all the parts (sql server, esx vm, server platform & vcenter) in virtualization nested, I created my data center, then Cluster then added the ESX host.

  The hosts added properly, no error. Then I remembered when I installed ESX inside a virtual machine, I am angry that the iso, I had the habit of HP does not work in my VM nested due to virtualized hardware.

  Then a fire came into my head. We will rebuild all of the physical cluster but NOT use the CV provided the iso file but use VMware provided iso file "VMware-VMvisor-Installer - 6.0.0 - 2159203.x86_64.iso".

  I did it today. I have rebuilt all hosts with the provided iso file VMware ESX...

  Spun SQL Server vCenter, service platform, all VM VM VM you need. My AD & DNS VM are on another server, so he has been upwards all the time.

  Connected to the web interface (yuck!).

  Created my data center...

  Created my Cluster...

  Add all my Cluster hosts.

  All of this worked!

  Therefore, if you encounter the same problem, I'm plan to generate your with the provided iso file VMware ESX hosts and try it. In my case, the provided HP iso file didn't work properly for me.

  I also downloaded the iso file of HP 2 other times to make sure and do a validation test and it did the same thing.

• Cannot add P2000 SAS LUN to host vmware

  I have two HP DL380 G6 vmware hosts and a P2000 storage device. The P2000 is connected directly to the two hosts with two SAS controllers. In hosts, I installed HP Sc08e PCI HBA adapters. A host (running ESXi 4.0) is connected to the storage and can make use of data warehouses. The other host (running ESX 4.0) does not see the new storage adapter.  During POST, the server lists the new adapter so the hardware itself is aware that there is a new HBA, but within Vsphere host is not simply see the adapter.

  The P2000 LUNS are mapped to all ports of P2000 for two guests. P2000 configuration the two hosts are set up for exactly the same thing.

  Can anyone suggest why I'm having this problem?

  Thanks in advance.

  Are the two hosts on the same build? According to the HCL , looks that the driver has been added to ESX 4.0 with update 1. Before that, you need to download and install manually.

  http://downloads.VMware.com/d/info/datacenter_cloud_infrastructure/vmware_vsphere/4_0#drivers_tools

  André

• Cannot add raw lun if the host is connected to vCenter

  I have MS cluster disks in HP EVA4400. They are presented to my guests. If I self host then I can add raw disks in VM but if I add host to vCenter then the lun of the bullies appear no more.

  Probably, if I anyone these LUNS and present with different lun ID then they would appear but can't bring those LUNS offline.

  Anyone have idea where I should start to investigate?

  I think that what you see is the expected behavior.

  In a cluster environment, you can add a unit logic as a ROW only one number. While adding, a mapping file raw device called (vmdk file) is created. On the other node MSCS, you must connect to this mapping file (via Add existing virtual disk) rather than create another ROW.

  Access to the RAW LUN through multiple files for mapping (if you manage to somehow create them) could cause problems with locking and possible data corruption.

  André

• Cannot add my license

  Hello

  I'm new user with vSphere. I installed an ESX and vSphere a few days ago, and now, the mode of assessment is expired.

  I have a license I recorded but I can not find how to enter my license on vSphere.

  In the menu "view...". "'Administration', I thought 'Rôles' and 'system logs. I have attached a screenshot. It seems to me that I have "License", isn't it?

  The menu is hide? Is there an action to do before?

  Thanks in advance for your answers,

  Nicolas

  It is here.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• Problems with PerfMon - cannot add counters

  Hello everyone.  I registered just to ask this question, which I couldn't find after a long time consult Google.  I come to you in the hope that when Google has failed, you will not!

  I use a program that some of you may be familiar, called Samurize (http://www.samurize.com/modules/news/), who does a lot of things; what I use for most allowed, in a blink of an eye, discern my CPU usage, RAM usage, information network, availability, hard disk space and my schedule on the calendar, among other things.  I know it is an old program and I know that it was designed for Windows 2000/XP, but it worked without a hitch (not including this one) on Vista and Windows 7.

  Recently, however, the ability to monitor CPU, RAM, upload and speed of download and availability has disappeared; all of them give me a flatline, statement I use no internet at all or my computer also (with the exception of availability, which reports that I have been on my computer for 49 days, 17 hours, 2 minutes and 47 seconds... he refuses to go to the top!).  Initially I thought it was a problem with the program.  It is not; It has something to do with Perfmon.  When I load perfmon.exe through the box run, it loads up with an error that says:

  "Cannot add these counters:

  \Memory\Available MB
  \Memory\% committed bytes used
  Defects of \Memory\Cache/s
  Defects of \Memory\Cache/s
  Time to \%Idle \PhysicalDisk (*)
  \PhysicalDisk (*) \Avg disk queue length
  \Network interface (*) \Bytes Total/sec.

  This isn't me accidentally say the same thing twice... it says what I typed on verbatim. [Edit:] Just remembered: other system monitors are perfectly fine.  Of course the Task Manager works well, but gadgets seem to work fine in my use of RAM and CPU, as well as my download balance sheet and download speeds. [/ Edit]

  It's pretty much the sum of my progress on the problem.  I found this page (http://support.microsoft.com/default.aspx/kb/300956), which seems like it might solve the problem... but being a lazy man boned, I hope that there is a simpler solution than that, those who are not "reformat".

  Any other relevant information:

  Windows 7 x 64 professional
  Updated with all official updates
  Recently spent Wi - Fi cable (apart from that, I can't thing of any change that I did with my computer)

  Thanks in advance!

  Hello SensaiOpti,

  I had the same problem. A level that your pointers to the perfmon counters are damaged, you must re-create these with LODCTR from an elevated command prompt:

  Click Start, type cmd click right cmd.exeand select run as administrator.
  At the prompt, type lodctr /r and press ENTER. This allows to repair the pointers (those that are stored in the registry).

  
  C:\Windows\System32>lodctr/r

  Info: Rebuilt successfully setting from system backup store performance counter

  After this action, it is possible that some providers are disabled. You can check the status with lodctr/q.

  C:\Windows\System32>lodctr/q
  Performance counter ID queries [PERFLIB]:
  Based index: 0 x 00000737 (1847)
  Last counter text ID: 0 x 00001560 (5472)
  Last help text ID: 0 x 00001561 (5473)

  [.NET CLR data] Performance counters (activated)
  DLL name: netfxperf.dll
  Open the procedure: OpenPerformanceData
  Collect the procedure: CollectPerformanceData
  Close the procedure: ClosePerformanceData
  First counter ID: 0 x 00001080 (4224)
  Last counter ID: 0x0000108C (4236)
  First help ID: 0 x 00001081 (4225)
  Last help ID: 0x0000108D (4237)
  
  etc.
  
  If she says (disabled) next to a provider, you can activate it with lodctr/e:. Use for the string between the [] at the beginning of the entry.

  Success

• error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or reboot the machine.

  Hello
  After upgrading to windows 7 Home premium 64 bit vista family premium 64-bit, I expected to be able to connect my EPSON Stylus D68 printer on my laptop and leave immediately. However, when I tried to do this installation constantly failed.  Therefore, I went to the manual add the printer option in the menu devices and printers. However I met this error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or restart the machine,"after reviewing the existing forums on the issue, I tried to restart the services option. However, the restart option has been obscured and when I just tried to start then I met an other error message: "windows could not start the spooler on the local computer service, error 1053: service has failed to demand launch or control in a timely. more when I click Properties to the spooler in the description it says failure to read the description. error code: 1813. This is all very frustrating for someone who just wants to add a printer to his laptop computer. can someone please? because I am all of these ideas.
  Thanks in advance,
  Chris.

  Try runing the file system Checker to check the alteration of system files - 1 Option to follow in the folliwng link:

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

• Cannot add contacts for the 'To' and 'cc' Box when sending emails

  Original title: emails

  cannot add contacts to the area "to" or "cc" box when sending mail that I only get the option to add addresses to a small drop-down list when I click in these boxes. I tried to uninstall the application and reinstall but made no difference!

  If you click on the "To", "Cc" or "Bcc" once he frequently gives you used, click New and , it gives you the complete list.  You can switch backwards between them by clicking on

  
  

  A more permanent solution   For Outlook

  Gear
  Several e-mail settings
  Customize Outlook
  Advanced Privacy settings
  AutoComplete suggestions
  Give suggestions for anyone I contacted (contacts and non-contacts)
  Save

• Cannot add the header HTML - CFWebstore on CF11

  Hello

  I get the error below on a new installation of CFWebstore v6.6 on CF11. I used a previous version of CFWebstore on CF7 and CF9 without problem. Looking for suggestions...

  Cannot add the HTML header. ColdFusion is unable to add the header specified in the output stream. It's probably because you used to define one of the ColdFusion Cookies of Session or authentication cookie. To do this, please use configuration at the application server level. The error occurred on line 213.

  Thanks in advance for any help!

  Gary

  I found this answer:

  To resolve this issue, connect to Coldfusion Admin, go to the memory Variables and uncheck "Disable the update from Coldfusion cookies using tags/functions of Coldfusion." Memorize your settings, and then restart your Web site.

• Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  You have placed your beam to insert at the end of your text on page 13 and then apply Insert menu: Page Break? In the v5.6.2, Pages I just add a new page to a section of four pages to this approach.