Cannot add the responsibility of the user in 11.5.10.2.

Similar Questions

• vifp addserver fails with the error cannot add the user

  This my first post on this forum that I couldn't find an answer via Google search. If I do not use correct terminology or fail to provide comprehensive information, please forgive me. I'm not an expert on VMWare, just a passionate curious tech. I found VMWare to be a very exciting and easy to use product. The VMWare knowledge base is excellent and so is the community of users.

  I have install VMWare ESXi 6.0 free House on servers Dell T420 and T110 II. I recently tested vMA 5 by installing it as a virtual machine on one of the servers. I watched the tutorial Youtube how to use vifp to add servers. I have network etc. on vMA installation and it works fine. Automatic update worked. I issue the command sudo vifp addserver 192.168.250.96, I am prompted for the password. When I enter the password, I get an error error: cannot add users. I checked the log file in /var/opt/vmware/vma/vifpd.log and the more descriptive message is:

  addServer: error occurred when adding users for 192.168.250.96... roll back. An error occurred during the creation of users on 192.168.250.96

  Then I noticed that since I'm on the console vMA to run these commands, as soon as the error occurs, I see that in the lower part, under recent tasks, I see an error: General system error: weak password. The details of the error says:

  

  Weak password: not quite different characters or classes.

  Now my password is strong enough. I can't post it here but I'll post a similar password:

  4518Gabdhjg #01

  It is 14 characters and has the numbers, letter uppercase, lowercase letters and special characters. I read the VMWare documentation on passwords and for me, the password seems very well. Any help will be appreciated.

  Thank you

  Arun Gupta

  My bad. I didn't know that vMA 6.0 is available. I just downloaded and configured vMA 6.0 and the problem is solved. Sorry for disturbing everyone.

• < critical > < WebLogicServer > < BEA-000254 > < cannot pass the user "psoftusr".

  Hi all.
  
  have a customer problem with permission to userid where they get an error in the application of patches.
  
  It's customers comment:
  
  We suspect that our psoftusr of the user who starts the Web server on a port higher than 1024 doesn't have the correct permissions to start
  without getting the error
  
  August 30, 2008 9:16:41 CEST > < critical > < WebLogicServer > < BEA-000254 >
  < cannot pass the user "psoftusr". java.lang.IllegalArgumentException: cannot initgroups(3) ("psoftusr"), system error: "no owner".
  
  
  
  problem is that once I go into the Admin Console and change the settings to enable the liaison post UID.
  
  After all I change the default page I have no problem.
  
  
  CT needs to know what permissions are psoftusr must have to be able to get rid of this error message?
  psoftusr is the id used to install the software in the first place.
  
  
  so far, the file permissions are set correctly in the LDAP directory.
  
  
  any thoughts...
  Thank you
  t

  CT is about PTools 8.49 and BEA_home is not under PS_Home, it would make everything about the difference in access to this user name?
  CT does not see the House under the envsetup (UNIX) BEA? How can they add that, to be part of the env? Maybe this could be one of the reasons...
  THX

• Add the user to the users group in the Users.ini file using c#

  Hello

  Using a c# application, we strive to add/remove a user from the TestStand Users.ini file.

  The CreateDeleteUsers.seq file in the samples of TestStand is used as a reference.

  We have seen that we are able to add the user to the list of user help file

  engine. UsersFile.UserList.SetPropertyObjectByOffset (0, 0 x 1, newUser.AsPropertyObject ());

  However, when we try to add the user to the user group, the sample file CreateDeleteUsers.seq said

  RunState.Engine.GetUserGroup (Locals.GroupName). Members.SetPropertyObjectByOffset (0, 0 x 1, Locals.User.AsUser.LoginName)

  If we try to replicate this in c#, the API seeks the last parameter (which is LoginName in the CreateDeleteUsers.seq file) as an object of property

  engine. GetUserGroup (this.) GroupName). Members.SetPropertyObjectByOffset (0, 0 x 1, newUser.AsPropertyObject ());

  This causes an exception of object reference when we run the application.

  Please advise on how to proceed.

  Thank you

  Arun-

  The members property is an array of string, so the 3rd parameter to SetPropertyObjectByOffset requires a string property object, IE. the user name and not of the user object. From the will of the user object error with '-17308; Specified value is not the expected type. ». The example should really be using SetValStringByOffset to be clearer so that you only specify the user name of the actual string.

• 'Environment of the user' Windows cannot load the user's profile, but you have logged on with the default profile for the system.

  Original title: the user environment

  After starting windows, on the Welcome screen, this message always comes.
  "User environment.
  Windows cannot load the user's profile, but you have logged on with the default profile for the system. DETAIL: Not enough memory is available to process this command.
  And all my files that I save before you shut down or restart my pc all the my sample files on the desktop, my documents disappear...

  Thanks... :)

  This is typical of a corrupted profile.  To recover, perform the following steps:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Almost always, corrupt profiles are accompanied by damaged drive.  During recovery, run a disk check with the /r or /f on your computer option.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• Cannot add the printer network Windows 7 64 bit

  My laptop Home Premium 64 - bit of Windows 7 (client) cannot add the network printer that sits on the Windows 7 Ultimate 64 bit computer. A client XP computer easily added the network printer. When you try to add the network printer, the Windows 7 client searches for the driver on the host computer and says "unable to connect to the printer - the operation has failed with error 0x000003e3. I downloaded the driver from the manufacturer of the printer to the client computer. I also disabled the firewall on the computers... Any help would be appreciated.

  Hello

  ·         What is the number and model of the printer that you are using?

  ·         How many computers are connected to the host computer?

  ·         You are on a domain network?

  Method 1:

  You can check the items below that explain how to install a printer in Windows 7.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Method 2:

  a. now follow the document below to add the printer to the Windows 7 computer.

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  b. If the steps above does not help try the procedure below.

  We need to change the port and check. Let us perform the steps below to install this printer and check.

  a. Click Start, click Control Panel, and double click on devices and printers.

  b. click Add a printer.

  c. Select "add a local printer.

  d. Select "create a new port". Select "Local Port" as the port type.

  e. in the "type a port name" box, type the address in the following format.

  \\[IP address of the host computer]------[the share name of the printer]

  And then click Next.

  f. Select the driver in the list of drivers. If no driver available, click the Windows Update button, wait the process finishes and then search for the driver again.

  g. complete the installation.

  For additional help, refer to the article below.

  Printer in Windows problems

  You can also check out the link below that addresses the same issue when you face:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-0x000003e3-when-trying-to-install-network/2348b57b-7448-E011-8dfc-68b599b31bf5?msgId=d577ab02-DC48-E011-8dfc-68b599b31bf5

• get the 1726 error: cannot add the port monitor

  get the 1726 error: cannot add the port monitor hp discovery port monitor (hp photosmart 5525 series) running Windows XP, HP Photosmart 5525

  Could not complete the installation.

  Hi Jeff,

  The computer manufacturing must have created a partition on the disk or provided you CD to restore the computer to the way it was when you bought it. If you have a PC clone, then probably you need to reformat your hard drive and reinstall the operating system. If you have an OEM computer (example: HP, Dell, ETC) there is most likely instructions when you turn on/off press F11 or F12 to return the computer to the computer.

  Note: Do nothing until you have all of your backup data.

• Base - Add the user name and password in script?

  Hello

  Scripting is not my thing, I run the script below in order to get the use of the data store space and it requires user name and password for vcenter, how do I add it in the script, then I can run as a scheduled task on my Windows Server that has installed PowerCli?

  # These are the properties assigned to the table via the ConvertTo-HTML cmdlet.

  $tableProperties = '< style >.

  $tableProperties = $tableProperties + "TABLE {border-width: 1px;}. border-style: solid; border-color: black ;} »

  $tableProperties = $tableProperties + "TH {border-width: 1px;}. padding: 5px; border-style: solid; border-color: black ;} »

  $tableProperties = $tableProperties + "TD {text-align: center;} '. border-width: 1px; padding: 5px; border-style: solid; border-color: black ;} »

  $tableProperties = $tableProperties + ' < / style >.

  ##The script will automatically connect to the server if necessary. The $server variable must

  #be changed if the server name changes.

  $server = "192.168.132.1".

  If (!) () to connect-viserver $server - ErrorAction SilentlyContinue). IsConnected)

  {

  Write-Host "connection to the server: ' $server

  to connect-viserver $server - ErrorAction SilentlyContinue err - ErrorVariable

  If ($Err)

  {

  Write-Host "Connection to the server error, please check server name." - ForegroundColor Red

  breaking

  }

  Write-Host "Full" - ForegroundColor Green

  }

  # cmdlet to retrieve information from data warehouses.

  # variable $rep stores all the information for each data store.

  $rep = @)

  Get-Datastore. Sort-Object-property name. {ForEach-Object

  $Datastore = $_

  $Report = "" | Select-Object - property Datastore, CapacityGB, FreeSpaceGB, PercFreeSpace

  $Report.Datastore = $Datastore.Name

  $Report.CapacityGB = [math]: tour ($_.) CapacityMB / 1 KB, 0)

  $Report.FreeSpaceGB = [math]: tour ($_.) FreeSpaceMB / 1 KB, 0)

  $Report.PercFreeSpace = [math]: Round (((100 * ($_.))) FreeSpaceMB)) / ($_.) (CapacityMB)), 0)

  $rep += $Report

  }

  # Formats date, file name, etc. #.

  #Write - Host "Generating report".

  $date = get-date

  $datefile = get-date - uformat ' %d-%m - Y % - hour %M ' %S

  $filename = "C:\vmware\powercli\reports\VMwareDatastoreUsage_" + $datefile + ".htm".

  # Generates vsphere datastore usage report #.

  Write-Host "Full" - ForegroundColor Green

  Write-Host "Generating datastore usage report".

  $rep | Sort PercFreeSpace | ConvertTo-HTML-head $tableProperties - body ' < th > < font style = ' "color: #000000 '" > < big > < b > VMware Datastore using < /b > < / big > < / font > < /th > | Out-file $filename

  Write-Host "Full" - ForegroundColor Green

  Write-Host "usage of your data store report has been saved to: ' $filename

  ##Send email with attached generated report #.

  #Write - Host "sending email with report:" $filename + "attached".

  Send-MailMessage-to "vmware-reports < . " [email protected] >"-subject 'vSphere datastore use' - to ' Andy White < [email protected] > "-body" VMware report attached: use of the data store "- attachment $filename - high - dno onSuccess, onFailure - smtpServer 192.168.13.3

  The connection is made in this line

  SE connect-VIServer $server - ErrorAction SilentlyContinue err - ErrorVariable

  You can add the user and password parameters of the cmdlet Connect-ViServer . But you want to have this info hardcoded in the script?

  An alternative is to use the credentials store.

  There are other alternatives to store the credentials.

• Cannot add the header HTML - CFWebstore on CF11

  Hello

  I get the error below on a new installation of CFWebstore v6.6 on CF11. I used a previous version of CFWebstore on CF7 and CF9 without problem. Looking for suggestions...

  Cannot add the HTML header. ColdFusion is unable to add the header specified in the output stream. It's probably because you used to define one of the ColdFusion Cookies of Session or authentication cookie. To do this, please use configuration at the application server level. The error occurred on line 213.

  Thanks in advance for any help!

  Gary

  I found this answer:

  To resolve this issue, connect to Coldfusion Admin, go to the memory Variables and uncheck "Disable the update from Coldfusion cookies using tags/functions of Coldfusion." Memorize your settings, and then restart your Web site.

• Adobe Story in error "cannot load the user's preferences" then I have to disconnect

  I try to access Adobe Story, but whenever I connect I get an error saying "Cannot load the user's preferences", then I have the ability to log out, but nothing else. I tried this using the desktop application as well as several browsers on my Mac and my PC. I tried to raise that this issue with the chat support however could not help with the issue. What can I do to solve this problem and power access to my account?

  Hello

  Can you please try again? He still does not?

• Cannot add the vmkernel nic: a specified parameter was not correct. vSphere CLI + ESXi 4

  Hello. I try to add vmknic with frames in my distributed virtual switch.

  I read the vSphere command-line Interface Installation and reference Guideguide:

  "vicfg-vmknic - a-i DHCP"vmk5"

  I see the error message:

  Cannot add the vmkernel nic: a specified parameter was not correct.

  Vim.Host.VirtualNic.Specification.Ip

  What's wrong?

  I tried all the combinations of parameters with the same result.

  Ok! I've found a workaround.

  Since adding a vmkernel remote interface doesn't seem to work with DVS, I simply created one on a standard vSwitch and it then migrated to the DVS. And voila: the value 9000 MTU migrated intact with her! Here are the steps I followed:

  1. put the ESX host into maintenance mode - evacuate VMs manually if necessary

  2 remove the VMKernel iSCSI/NFS to the DVS interface

  3. create a standard virtual switch with no physical cards. He has no need to be a VMKernel VM Networking switch is fine. Make a note of the name you gave to the PortGroup created on the new vSwitch.

  4 using the remote control line, add the new interface vkernel specifying an appropriate jumbo MTU (9000) and the PortGroup on the standard new vSwitch. For example:

  esxcfg - vmknic.pl - Server

  If you get 3 answers, everything works. If you get failures, something has gone wrong. Go back and check that the interface is configured correctly using the command list esxcfg - vmknic.pl-.

  Enjoy!

  M

• Add the user to the role during the reconciliation

  Hello
  
  I have this scenario:
  We have a database resource on which we run reconciliation to bind accounts to our users in IDM.
  I also have roles that contains this resource. If the conciliation is running I want to add the user
  in this role, instead of directly linking the user to the resource account.
  
  Our problem today is that, if users is related to the resource, and then gets the role, if the role is deleted, the user always has the link to the resource.
  Who is?
  
  I guess I need to use "by workflow account" to get there, but I don't know how to write this workflow.
  
  Kind regards
  
  Henrik

  Hi Henrik,

  You could do during reconciliation with a workflow by account.

  Another approach is to use a regular workflow which lists users who have an account on the target resource and treats each of them to remove all unnecessary direct assignments. That's what I went with, and I run the workflow periodically.

• Cannot add the new log file for the 11g database.

  Salvation of DBA
  
  I'm not able to add the log file, I receive the error message when the database is added.
  
  SQL > alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of size of 50 m;
  alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of 50 m of size
  *
  ERROR on line 1:
  ORA-01505: Error adding log files
  ORA-01577: cannot add the log file ' / oracle/DEV/db/apps_st/data/log03a.dbf'-fichier
  already a part of the database
  
  SQL > select a.group #, a.status, a member of the journal of v$ a, v$ logfile b where a.group # order of b.group = # 1;
  
  GROUP # MEMBER STATUS
  ---------- ---------------------------------------- ----------
  1 ACTIVE /oracle/DEV/db/apps_st/data/log01a.dbf
  1 ACTIVE /oracle/DEV/db/apps_st/data/log01b.dbf
  /Oracle/DEV/db/apps_st/data/log02a.dbf CURRENT 2
  /Oracle/DEV/db/apps_st/data/log02b.dbf CURRENT 2
  
  Kindly help me to add the new log file to my database.
  
  Thank you
  SG

  PGO

  Please see (how can redo log group be dropped when it ever becomes inactive?) [ID] 730827.1).

  Thank you
  Hussein

• How to add the user to the Group?

  HY,
  Let's say I'm new to application Express 3.2.1 :)... I searched for exmple or no matter how how to add the user in the Group (at the level of the PL/SQL application).
  I know wwv_flow_group_users Traoré is an opinion not a table. I also know thet CREATE_USER_GROUP procedure create us group, and with the CURRENT_USER_IN_GROUP function, we see if the user is in the selectet group.
  
  But again, my question is how to add the user to the Group?
  
  Thank you
  Andrej
  
  Published by: user10719915 on October 16, 2009 12:18 AM

  Hello

  It will be colon delimited.

  Concerning

  Paul

• ORA-01994: GRANT failed: failed to add the users to the public password file

  Snoussi,
  
  our applications 11.5.10.2 and db 9.2.0.6 whenever I'm in the process of grant dba privileges to rman user sys, I get the below error
  
  ORA-01994: GRANT failed: failed to add the users to the public password file
  
  I created the password file and I've changed remote_login_passwordfile = NONE for remote_login_passwordfile = EXCLUSIVE lock
  in initSID.ora then I bounced DB but its showing again.
  
  
  SQL > show the distance parameter
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  real chain of remote_archive_enable
  remote_dependencies_mode string TIMESTAMP
  remote_listener chain
  Remote_login_passwordfile string NONE
  REMOTE_OS_AUTHENT boolean FALSE
  remote_os_roles boolean FALSE
  SQL >
  
  Here is my information in initSID.ora file.
  
  ----------------------------------------------
  #############################################################################
  #
  # END OF THE CBO SETTINGS SECTION
  #
  #############################################################################
  
  
  #---FIN OF REQUIRED OPTIMIZER PARAMETERS-
  
  #
  # Client settings.
  #
  Remote_login_passwordfile = EXCLUSIVE lock
  #EMOTE_LOGIN_PASSWORDFILE = exclusive lock
  IFile=/U05/Oracle/visdb/9.2.0/DBS/VIS_linux2_ifile.ora
  [oracle@linux2 dbs] $
  
  Published by: HumanDBA on June 9, 2009 04:06

  Danny,

  Do you use a spfile to start the database? If Yes, then you must change this setting in the spfile so (issue "show the spfile parameter' to check).

  Kind regards
  Hussein

• I have a subscription to creative cloud for 2 other colleagues and myself, but cannot add 2 other colleagues as users. How can I do this?

  I have a subscription to creative cloud for 2 other colleagues and myself, but cannot add 2 other colleagues as users. How can I do this?

  American salvation,

  I checked your account and found that you have just 1 place in your creative cloud account. You must add a license from the upper right corner on your team admin page.

  You can follow the article: CC help | Manage your creative cloud to the membership of the teams who will help you add a license in your team account.

  Let us know if you face any trouble while doing this.

  Thank you

  Yann Arora