Cannot add users with.app

Similar Questions

• vMA 5.5 error: cannot add users.

  Hello.

  I need to add 3 guests to vMA.I is not domain controller.

  1 deploy charges vMA of the FVO and configure the IP and password for admin-vi.

  2. Add the first host from ESX01 successfully. ( vifp addserver esx02 - fpauth authpolicy)

  3. added ESXi of second and third finishing with failure. (commands below)

  VI-admin@vma02:~ > vifp addserver esx02 authpolicy - fpauth

  root@esx02's password:

  VI-admin@vma02:~ > vifp mailing lists

  esx02.localdomain ESXi

  VI-admin@vma02:~ > vifp addserver esx03 authpolicy - fpauth

  root@esx03's password:

  Error: Cannot add users

  in vSphere client, you can see something that:

  

  For above tasks creates user-vi and vi-admin next. After that many seconds, vi-admin is removed (I dunno why...)

  /var/log/VMware/VMA/vifpd.log on vMA

  [2016 04-07 19:51:07.186 7F220CD47700 info "App"] command-> 1

  [2016 04-07 19:51:07.187 7F220AEC7700 info "App"] ADDSERVER

  [2016 04-07 19:51:07.197 7F220CD47700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016 04-07 19:51:07.595 7F220AEC7700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  [2016 04-07 19:51:12.144 7F220CD47700 info "App"] command-> 1

  [2016 04-07 19:51:12.145 7F220CD47700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016 04-07 19:51:12.145 7F220AE45700 info "App"] ADDSERVER

  [2016 04-07 19:51:12.504 7F220AE45700 info "App"] Already connected.

  [2016 04-07 19:51:12.509 7F220AE45700 info "App"] Already connected.

  [2016 04-07 19:51:30.308 7F220AE45700 info "App"] permissions set for [email protected]

  Credstore [2016-04-07 19:51:30.345 7F220AE45700 info "App"]: Add [email protected] credstore vi-admin user

  [2016 04-07 19:51:30.361 7F220AE45700 info "App"] can take possession of the user [email protected].

  [2016 04-07 19:51:30.361 7F220AE45700 WARNING "App"] ownership of [email protected] because it seems to be created by us.

  [2016 04-07 19:51:52.534 7F220AE45700 error 'App'] addserver: error occurred when adding users to esx03.localdomain... roll back. Error in Vma

  kernel.

  [2016 04-07 19:51:52.582 7F220AE45700 info "App"] User [email protected] is created by vifp. Detached...

  [2016 04-07 19:51:52.703 7F220AE45700 info "App"] could not remove permissions for [email protected].

  [2016 04-07 19:51:52.704 7F220AE45700 info "App"] deleted user [email protected].

  [2016 04-07 19:51:52.733 7F220AE45700 info "App"] [email protected] the user is removed from vi-admin credstore.

  [2016 04-07 19:51:52.768 7F220AE45700 error 'App'] Cannot add users

  [2016 04-07 19:51:52.768 7F220AE45700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  [2016 04-07 19:51:52.772 7F220AE45700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  In what newspapers can I find something more?

  var/log/VMkernel.log on the host is not clear to me... but if someone asks I'll stick.

  What should I do more? I want only add 3 esxi servers at VMAs and the next time you connect to these esxi without putting password.

  Interesting, that's when I deployed the next vMA02 and VM03, I can only add an esxi to vMA. During the second and third esxi adding that generate the same mistakes... Now I have 1 vMA for each host ...

  Please on the suggestion and help... because my adventure with vMA is not good... the last time I was the problem with this vMA 5.5 the session is not authenticated after connect you to the target ESXi and not solved this in my second lab...

  Sebastian

  Update:

  I use this command to only simple time without authpolicy:

  

  Newspapers:

  Command [2016-05-11 04:15:20.216 7F7A93D87700 info "App"]-> 1

  [2016-05-11 04:15:20.219 7F7A91E85700 info "App"] ADDSERVER

  [2016-05-11 04:15:20.223 7F7A93D87700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016-05-11 04:15:20.362 7F7A91E85700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  Command [2016-05-11 04:15:24.144 7F7A93D87700 info "App"]-> 1

  [2016-05-11 04:15:24.144 7F7A93D87700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016-05-11 04:15:24.144 7F7A91EC6700 info "App"] ADDSERVER

  [2016-05-11 04:15:24.196 7F7A91EC6700 info "App"] Already connected.

  [2016-05-11 04:15:24.198 7F7A91EC6700 info "App"] Already connected.

  [2016-05-11 04:15:24.732 7F7A91EC6700 info "App"] permissions set for [email protected]

  Credstore [2016-05-11 04:15:24.777 7F7A91EC6700 info "App"]: Add [email protected] credstore vi-admin user

  [2016-05-11 04:15:24.791 7F7A91EC6700 info "App"] can take possession of the user [email protected].

  [2016 05-11 04:15:24.793 7F7A91EC6700 WARNING "App"] ownership of [email protected] because it seems to be created by us.

  [2016-05-11 04:15:26.943 7F7A91EC6700 info "App"] permissions set for [email protected]

  Credstore [2016-05-11 04:15:26.980 7F7A91EC6700 info "App"]: adds the [email protected] vi-user credstore user

  [2016-05-11 04:15:27.052 7F7A91EC6700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  

  

  Test:

  VI-admin@localhost:/var/log/VMware/VMA > vifp mailing lists

  ESX01.localdomain ESXi

  esx02.localdomain ESXi

  esx03.localdomain ESXi

  VI-admin@localhost:/var/log/VMware/VMA > vifptarget s esx03.localdomain

  VI-admin@localhost:/var/log/VMware/VMA[esx03.localdomain] > esxcli vm process list

  vMA02

  World ID: 35859

  Process ID: 0

  VMX Cartel ID: 35856

  UUID: 42 37 c3 b6 11 61 29 95 - 30 98 9f c1 b3 44 95 ba

  Full name: vMA02

  The configuration file: / vmfs/volumes/56edd79c-9225dbd5-c1a2-2cc260319711/vSphere Management Assistant (vMA) / vSphere Management Assistant (vMA) .vmx

  vMA03

  World ID: 39084

  Process ID: 0

  VMX Cartel ID: 39081

  UUID: 42 37 be 3rd 4 b 98 8 b - f0 to f9 cf 0c ec e6 f2 f9 0c

  Full name: vMA03

  The configuration file: /vmfs/volumes/56edd87a-e0640a1a-0842-2cc260319711/vMA03/vMA03.vmx

  Correct on esx03 I have vMA03 and vMA02.

  

  Then seems OK.

  Case closed.

• Cannot add prices with decimals in BCC with the language of the user in Swedish

  Hello

  We use the ATG 10.2

  In BCC-> access control, I changed the local preference for Swedish admin

  Now, if I want to add the price for any SKU as 10.2, I am unable to do so. It does not enter the dot character

  
  

  I created the price list with the locale as sv_SE

  Could you please tell me how I can do this. I want the decimal price with the locale in Swedish
  

  This looks like a bug, that I can recreate locally.

  You mention a SR with Oracle Trade Support on this issue?

  Thank you

  Gareth

  Please indicate any update as "Good response" or "Useful answer" If this update help and answers your question, so that others can identify the correct/good update between the many updates.

• Cannot add user to account Professional Edition

  

  I created a new single-edition iPad app and ready to build the application with DPS APP Builder and submit to Apple.

  When I go to DPS Account Management, to add the user (Adobe ID created especially for this project), I get this alert that the user could not be added.

  My guess is that I should have added this Adobe ID, until I started to build the folio.

  When I try to compile the application since InDesign Folio Builder... Create the App, it seems that I need to activate the application with a serial number purchased.

  How can I get this to work with my business account Folio?

  Thank you!

  You have encountered a weird problem with the administration of the accounts. When you check an Adobe ID to work with DPS, you make actually main account and you can not convert a master account to a delegate account. It is why the error message tells you to create a new account. Of course, this means that you need to transfer the folios of the Adobe ID of origin to the new account you choose. After you have created the new delegate account, there are two ways to do this:

  * Create a new folio in the new account and import items. It works well, if your folder structure is configured correctly and that you are using a sidecar.xml file.

  * Create a new folio in the new account. and share the folio from the old account to the new. Then use the command copy to copy items on the new folio.

  Also, with a business account, it is best to avoid using the method Create App to publish a folio. Connect directly to the DPS App Builder using an Adobe ID with a role of DPS App Builder. Create the App is primarily intended for users of simple editing.

• Open Directory: Cannot add users remotely

  I have questions, adding users to Open Directory of the Server app. It happens when I connect to the remote server, not when I'm on the service computer itself.

  After adding a user, I get:

  Operation is not supported by the node directory.

  I looked around here, and all I saw was an ambiguous statement to verify the certificate of the AO. OD now creates a code signing certificate when I create a master, but under Server certificates, it does not use it, and I can't assign this certificate to the OD service. Only certificates that I can attribute to the OD service are a self-signed certificate, a class cert IV checked (StartCom) 2 and the proverbial 'none '.

  Any suggestions?

  It seems to be a problem with the server does not have its own code signing certificate?

  I go to certificates > custom setting > and Directory Services is using my StartSSL certificate instead of the code signing certificate he created. It doesn't let me assign this certificate to the service.

  Can someone help? I can't find answers anywhere.

• API of BOTTOM add user with the PIM Memo/address settings

  Hello

  I try to add a new Blackberry user if LOW API with the PIM Memo/address configuration. I know that using the BASUserAdminClient it is possible, so I think it would be possible to do the same thing by using web services.

  Have no idea about it?

  Currently user control PIM by BWS is limited to control wireless synchronization and the resolution of conflicts, specification of the server is not yet supported for knowing where to retrieve the data.

• Cannot add program with function Install using Palm 6.2, Vista SP1 and LifeDrive

  Hello

  I am trying to add go to my Palm. I click on install from the sidebar of the office, then Add and point to the filez.prc file. However I get a message saying that the file cannot be copied. The tool, the installation program uses to do this is the tool of QuckInstall. Should I use another tool? I heard that QuickInstall does not work with 6.2.

  Thank you

  Monk66

  Looks like it's time for a "clean uninstall" and reinstall Palm Desktop.

  http://forums.Palm.com/Palm/board/message?board.ID=windows_hotsync&thread.ID=43307&jump=true

  WyreNut

  Message relates to: Centro (AT & T)

• Cannot add bookmarks with WB and/or all extensions disabled

  Using FF 3.6.8. Updated for FF2 a few months when I found extension 'Old manage bookmarks' which allows me to see all the bookmarks and folders to different levels of tree in a single window. But since the upgrade, I can't add a bookmark for a Web page by any other means that create new bookmark URL, copy and paste. Certainly none with a click. Have turned off my two extensions of bm (one above and adds BM here) and then all extensions, to see if the problem goes away. It remains. On Windows XP SP3.

  Try a new profile.
  http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

• Cannot add users

  We recently signed up for the company of the trial and we are trying to get some added users. When we try to add two users, it says "you can't add that email address to your account." We have not added all the account again so I know we don't have all the 10 seats filled. Someone has encountered this problem and has found a way to fix it?

  Hi justini33672794,

  You will need to get the domain whitelist for the users e-mail address so that you are able to add the user.

  Please send a request to e-mail account of the administrator and the users e-mail address you are trying to add to the email address that I've private messaged you. So that you support the team can whitelist the domain of the e-mail address that you are trying to add.

  Kind regards

  Nicos

• Cannot add text with fill & sign

  I recently updated to the DC worm 2015.008.20082 reader.  I am running Windows 7 Home Premium SP1 64 - bit OS.  Before the upgrade (Adobe XI), I was able to open PDF documents and use Fill & sign to add information.  However, since the upgrade when I click Fill & sign, it gives me a blank page.  The mouse seems to be loading or transformation of something, but does not load the page I want to edit.  The strange thing is that it works on my machine Windows 8.1 friends as planned.  It allows me to add text fields and save.  The question is why it does not work on Windows 7?

  I tried Adobe DC uninstalling and reinstalling.  I tried to disarm and even drop the McAfee Antivirus and replaced by AVG Antivirus.  Thank you very much for your help!

  The user account type is administrator.  Yes, I noticed the Windows 7 security WARNING too and start looking at why.  While I wasn't able to get rid of the warning, I changed the compatibility mode to Windows 7 and it worked.  I was able to open the PDF file and use fill and sign.  Now, just need to figure out why I'm getting the security warning.  Thank you.

• Cannot add users to roles of Directors

  I worked on setting up ssh and realize that until the user can connect, it will have to be added to the administrative role.

  Since I tried this, but every time I add and click OK and return the user has not been added to the role.

  What else could be missing?

  I tried KB1029178 I wanted to add an another root users, but ESX4i allows a root user. But I've had success using this KB. I also tried another method that has worked well:

  SSH to the host and run the following:

  useradd - M d.

  passwd

  VI etc/passwd

  Find the and must be modified to include:

  : /: / bin/ash

  In a VI GUI client, directly connected to the host in question:

  Permissions | Add the authorization. Assign the user to the Administrators group.

• Cannot add user 2 on my PC on my ipad

  I used to be able to disconnect mymsn and connect to the other user. Now when I try

  It won't let me. I get "reserved domain". It only lets my own username.

  you're talking about you be unable to connect to some Web site on your iPad?

• Cannot add users to groups

  Hello

  I can't add that a new contact for groups, the drag and drop no longer works.

  Do you know why and how I can fix it?

  Thanks for your help!

  Do you mean is "Contacts"?

  Make sure that the contact that you are trying to add is not already in this group. This is the situation where adding them is supposed to not work.

  Otherwise, I don't see what could be causing it.

• vifp addserver fails with the error cannot add the user

  This my first post on this forum that I couldn't find an answer via Google search. If I do not use correct terminology or fail to provide comprehensive information, please forgive me. I'm not an expert on VMWare, just a passionate curious tech. I found VMWare to be a very exciting and easy to use product. The VMWare knowledge base is excellent and so is the community of users.

  I have install VMWare ESXi 6.0 free House on servers Dell T420 and T110 II. I recently tested vMA 5 by installing it as a virtual machine on one of the servers. I watched the tutorial Youtube how to use vifp to add servers. I have network etc. on vMA installation and it works fine. Automatic update worked. I issue the command sudo vifp addserver 192.168.250.96, I am prompted for the password. When I enter the password, I get an error error: cannot add users. I checked the log file in /var/opt/vmware/vma/vifpd.log and the more descriptive message is:

  addServer: error occurred when adding users for 192.168.250.96... roll back. An error occurred during the creation of users on 192.168.250.96

  Then I noticed that since I'm on the console vMA to run these commands, as soon as the error occurs, I see that in the lower part, under recent tasks, I see an error: General system error: weak password. The details of the error says:

  

  Weak password: not quite different characters or classes.

  Now my password is strong enough. I can't post it here but I'll post a similar password:

  4518Gabdhjg #01

  It is 14 characters and has the numbers, letter uppercase, lowercase letters and special characters. I read the VMWare documentation on passwords and for me, the password seems very well. Any help will be appreciated.

  Thank you

  Arun Gupta

  My bad. I didn't know that vMA 6.0 is available. I just downloaded and configured vMA 6.0 and the problem is solved. Sorry for disturbing everyone.

• I get a "cannot add that email address" when you try to add a new user. I have enough licenses available.

  I get a "cannot add that email address" when you try to add a new user. I have enough licenses available and was able to add more users later without error.  I have 3 email address that returns this error message.  I tried to add each several times that produced the error message every time.  Connected out of the session and back on and the error message every time.

  It is likely that these e-mail addresses already exist in the eSign environment and you are not allowed to add these emails.

  Please contact support about it, which can help with that.