Cannot add user 2 on my PC on my ipad

Similar Questions

• vMA 5.5 error: cannot add users.

  Hello.

  I need to add 3 guests to vMA.I is not domain controller.

  1 deploy charges vMA of the FVO and configure the IP and password for admin-vi.

  2. Add the first host from ESX01 successfully. ( vifp addserver esx02 - fpauth authpolicy)

  3. added ESXi of second and third finishing with failure. (commands below)

  VI-admin@vma02:~ > vifp addserver esx02 authpolicy - fpauth

  root@esx02's password:

  VI-admin@vma02:~ > vifp mailing lists

  esx02.localdomain ESXi

  VI-admin@vma02:~ > vifp addserver esx03 authpolicy - fpauth

  root@esx03's password:

  Error: Cannot add users

  in vSphere client, you can see something that:

  

  For above tasks creates user-vi and vi-admin next. After that many seconds, vi-admin is removed (I dunno why...)

  /var/log/VMware/VMA/vifpd.log on vMA

  [2016 04-07 19:51:07.186 7F220CD47700 info "App"] command-> 1

  [2016 04-07 19:51:07.187 7F220AEC7700 info "App"] ADDSERVER

  [2016 04-07 19:51:07.197 7F220CD47700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016 04-07 19:51:07.595 7F220AEC7700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  [2016 04-07 19:51:12.144 7F220CD47700 info "App"] command-> 1

  [2016 04-07 19:51:12.145 7F220CD47700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016 04-07 19:51:12.145 7F220AE45700 info "App"] ADDSERVER

  [2016 04-07 19:51:12.504 7F220AE45700 info "App"] Already connected.

  [2016 04-07 19:51:12.509 7F220AE45700 info "App"] Already connected.

  [2016 04-07 19:51:30.308 7F220AE45700 info "App"] permissions set for [email protected]

  Credstore [2016-04-07 19:51:30.345 7F220AE45700 info "App"]: Add [email protected] credstore vi-admin user

  [2016 04-07 19:51:30.361 7F220AE45700 info "App"] can take possession of the user [email protected].

  [2016 04-07 19:51:30.361 7F220AE45700 WARNING "App"] ownership of [email protected] because it seems to be created by us.

  [2016 04-07 19:51:52.534 7F220AE45700 error 'App'] addserver: error occurred when adding users to esx03.localdomain... roll back. Error in Vma

  kernel.

  [2016 04-07 19:51:52.582 7F220AE45700 info "App"] User [email protected] is created by vifp. Detached...

  [2016 04-07 19:51:52.703 7F220AE45700 info "App"] could not remove permissions for [email protected].

  [2016 04-07 19:51:52.704 7F220AE45700 info "App"] deleted user [email protected].

  [2016 04-07 19:51:52.733 7F220AE45700 info "App"] [email protected] the user is removed from vi-admin credstore.

  [2016 04-07 19:51:52.768 7F220AE45700 error 'App'] Cannot add users

  [2016 04-07 19:51:52.768 7F220AE45700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  [2016 04-07 19:51:52.772 7F220AE45700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  In what newspapers can I find something more?

  var/log/VMkernel.log on the host is not clear to me... but if someone asks I'll stick.

  What should I do more? I want only add 3 esxi servers at VMAs and the next time you connect to these esxi without putting password.

  Interesting, that's when I deployed the next vMA02 and VM03, I can only add an esxi to vMA. During the second and third esxi adding that generate the same mistakes... Now I have 1 vMA for each host ...

  Please on the suggestion and help... because my adventure with vMA is not good... the last time I was the problem with this vMA 5.5 the session is not authenticated after connect you to the target ESXi and not solved this in my second lab...

  Sebastian

  Update:

  I use this command to only simple time without authpolicy:

  

  Newspapers:

  Command [2016-05-11 04:15:20.216 7F7A93D87700 info "App"]-> 1

  [2016-05-11 04:15:20.219 7F7A91E85700 info "App"] ADDSERVER

  [2016-05-11 04:15:20.223 7F7A93D87700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016-05-11 04:15:20.362 7F7A91E85700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  Command [2016-05-11 04:15:24.144 7F7A93D87700 info "App"]-> 1

  [2016-05-11 04:15:24.144 7F7A93D87700 info "App"] MessageQueue::RecvMessage - id of the queue is 0

  [2016-05-11 04:15:24.144 7F7A91EC6700 info "App"] ADDSERVER

  [2016-05-11 04:15:24.196 7F7A91EC6700 info "App"] Already connected.

  [2016-05-11 04:15:24.198 7F7A91EC6700 info "App"] Already connected.

  [2016-05-11 04:15:24.732 7F7A91EC6700 info "App"] permissions set for [email protected]

  Credstore [2016-05-11 04:15:24.777 7F7A91EC6700 info "App"]: Add [email protected] credstore vi-admin user

  [2016-05-11 04:15:24.791 7F7A91EC6700 info "App"] can take possession of the user [email protected].

  [2016 05-11 04:15:24.793 7F7A91EC6700 WARNING "App"] ownership of [email protected] because it seems to be created by us.

  [2016-05-11 04:15:26.943 7F7A91EC6700 info "App"] permissions set for [email protected]

  Credstore [2016-05-11 04:15:26.980 7F7A91EC6700 info "App"]: adds the [email protected] vi-user credstore user

  [2016-05-11 04:15:27.052 7F7A91EC6700 info "App"] MessageQueue::SendMessage - id of the queue is 0

  

  

  Test:

  VI-admin@localhost:/var/log/VMware/VMA > vifp mailing lists

  ESX01.localdomain ESXi

  esx02.localdomain ESXi

  esx03.localdomain ESXi

  VI-admin@localhost:/var/log/VMware/VMA > vifptarget s esx03.localdomain

  VI-admin@localhost:/var/log/VMware/VMA[esx03.localdomain] > esxcli vm process list

  vMA02

  World ID: 35859

  Process ID: 0

  VMX Cartel ID: 35856

  UUID: 42 37 c3 b6 11 61 29 95 - 30 98 9f c1 b3 44 95 ba

  Full name: vMA02

  The configuration file: / vmfs/volumes/56edd79c-9225dbd5-c1a2-2cc260319711/vSphere Management Assistant (vMA) / vSphere Management Assistant (vMA) .vmx

  vMA03

  World ID: 39084

  Process ID: 0

  VMX Cartel ID: 39081

  UUID: 42 37 be 3rd 4 b 98 8 b - f0 to f9 cf 0c ec e6 f2 f9 0c

  Full name: vMA03

  The configuration file: /vmfs/volumes/56edd87a-e0640a1a-0842-2cc260319711/vMA03/vMA03.vmx

  Correct on esx03 I have vMA03 and vMA02.

  

  Then seems OK.

  Case closed.

• Cannot add users with.app

  Hello

  I managed users in the past with the.app. After a long period where no changes are made, I am trying to add a new user using the.app.

  I am trying to add a normal lokal, (not a user directory). App server tells me that I have enough rights to add a user account. I am the admin of the server and checked it with the 'normal' user admin application

  Does anyone have a clue what goes wrong and what to check to find the problem?

  Thank you

  Sascha

  One thing you might check is if you are authenticated to make changes in the directory utility

  First open Server.app then choose 'Tools' in the top menu and then open "utility directory.

  Click the icon of the directory editor

  in the first drop down choose: look at a "users".

  the second drop down menu choose: in the node "/ LDAPv3/127.0.0.1".

  Then click on the padlock and enter the user name and password for the admin directory, it will probably be different from that of the server admin account

• Cannot add users

  We recently signed up for the company of the trial and we are trying to get some added users. When we try to add two users, it says "you can't add that email address to your account." We have not added all the account again so I know we don't have all the 10 seats filled. Someone has encountered this problem and has found a way to fix it?

  Hi justini33672794,

  You will need to get the domain whitelist for the users e-mail address so that you are able to add the user.

  Please send a request to e-mail account of the administrator and the users e-mail address you are trying to add to the email address that I've private messaged you. So that you support the team can whitelist the domain of the e-mail address that you are trying to add.

  Kind regards

  Nicos

• Cannot add users to roles of Directors

  I worked on setting up ssh and realize that until the user can connect, it will have to be added to the administrative role.

  Since I tried this, but every time I add and click OK and return the user has not been added to the role.

  What else could be missing?

  I tried KB1029178 I wanted to add an another root users, but ESX4i allows a root user. But I've had success using this KB. I also tried another method that has worked well:

  SSH to the host and run the following:

  useradd - M d.

  passwd

  VI etc/passwd

  Find the and must be modified to include:

  : /: / bin/ash

  In a VI GUI client, directly connected to the host in question:

  Permissions | Add the authorization. Assign the user to the Administrators group.

• Cannot add user to account Professional Edition

  

  I created a new single-edition iPad app and ready to build the application with DPS APP Builder and submit to Apple.

  When I go to DPS Account Management, to add the user (Adobe ID created especially for this project), I get this alert that the user could not be added.

  My guess is that I should have added this Adobe ID, until I started to build the folio.

  When I try to compile the application since InDesign Folio Builder... Create the App, it seems that I need to activate the application with a serial number purchased.

  How can I get this to work with my business account Folio?

  Thank you!

  You have encountered a weird problem with the administration of the accounts. When you check an Adobe ID to work with DPS, you make actually main account and you can not convert a master account to a delegate account. It is why the error message tells you to create a new account. Of course, this means that you need to transfer the folios of the Adobe ID of origin to the new account you choose. After you have created the new delegate account, there are two ways to do this:

  * Create a new folio in the new account and import items. It works well, if your folder structure is configured correctly and that you are using a sidecar.xml file.

  * Create a new folio in the new account. and share the folio from the old account to the new. Then use the command copy to copy items on the new folio.

  Also, with a business account, it is best to avoid using the method Create App to publish a folio. Connect directly to the DPS App Builder using an Adobe ID with a role of DPS App Builder. Create the App is primarily intended for users of simple editing.

• Open Directory: Cannot add users remotely

  I have questions, adding users to Open Directory of the Server app. It happens when I connect to the remote server, not when I'm on the service computer itself.

  After adding a user, I get:

  Operation is not supported by the node directory.

  I looked around here, and all I saw was an ambiguous statement to verify the certificate of the AO. OD now creates a code signing certificate when I create a master, but under Server certificates, it does not use it, and I can't assign this certificate to the OD service. Only certificates that I can attribute to the OD service are a self-signed certificate, a class cert IV checked (StartCom) 2 and the proverbial 'none '.

  Any suggestions?

  It seems to be a problem with the server does not have its own code signing certificate?

  I go to certificates > custom setting > and Directory Services is using my StartSSL certificate instead of the code signing certificate he created. It doesn't let me assign this certificate to the service.

  Can someone help? I can't find answers anywhere.

• Cannot add users to groups

  Hello

  I can't add that a new contact for groups, the drag and drop no longer works.

  Do you know why and how I can fix it?

  Thanks for your help!

  Do you mean is "Contacts"?

  Make sure that the contact that you are trying to add is not already in this group. This is the situation where adding them is supposed to not work.

  Otherwise, I don't see what could be causing it.

• vifp addserver fails with the error cannot add the user

  This my first post on this forum that I couldn't find an answer via Google search. If I do not use correct terminology or fail to provide comprehensive information, please forgive me. I'm not an expert on VMWare, just a passionate curious tech. I found VMWare to be a very exciting and easy to use product. The VMWare knowledge base is excellent and so is the community of users.

  I have install VMWare ESXi 6.0 free House on servers Dell T420 and T110 II. I recently tested vMA 5 by installing it as a virtual machine on one of the servers. I watched the tutorial Youtube how to use vifp to add servers. I have network etc. on vMA installation and it works fine. Automatic update worked. I issue the command sudo vifp addserver 192.168.250.96, I am prompted for the password. When I enter the password, I get an error error: cannot add users. I checked the log file in /var/opt/vmware/vma/vifpd.log and the more descriptive message is:

  addServer: error occurred when adding users for 192.168.250.96... roll back. An error occurred during the creation of users on 192.168.250.96

  Then I noticed that since I'm on the console vMA to run these commands, as soon as the error occurs, I see that in the lower part, under recent tasks, I see an error: General system error: weak password. The details of the error says:

  

  Weak password: not quite different characters or classes.

  Now my password is strong enough. I can't post it here but I'll post a similar password:

  4518Gabdhjg #01

  It is 14 characters and has the numbers, letter uppercase, lowercase letters and special characters. I read the VMWare documentation on passwords and for me, the password seems very well. Any help will be appreciated.

  Thank you

  Arun Gupta

  My bad. I didn't know that vMA 6.0 is available. I just downloaded and configured vMA 6.0 and the problem is solved. Sorry for disturbing everyone.

• Directory on Windows 7 Enterprise security cannot add new permissions to the user for users already in AD domain 2008 R2.

  It is a network extended, connected by virtual private networks Adtran.  I am the administrator of the system.  We have recently upgraded to two Active Directory to Windows 2008 R2 servers.  These servers do not have the error event and dcdiag does not show any problem.

  One of the nets under distance I can RD in the main location that includes the ad servers.  Back in my Windows 7 Enterprise customer is part of the field and is quickly recognized if I withdraw from the field and add it. The computer network browser service pulls up the computers in the domain and I connect quickly to the actions.

  What does not work, it is if I go to a folder on a local drive and you try to add a user or change the property.  After you enter a member user in the dialog add user to search for the user in AD, I get the correct authorization box to allow access.  After you correctly enter the administrator credentials that I just get the wheel turning, the organizers can't even process time out, I have to manually close the task.  Under certain condition, I get an error "com surrogate does not" and "cannot open access control editior.

  Norton 2011 is running and AppLocker is on.  However, this used to work before moving on to a 2008 R2 de Windows Server 2003 ads.

  Any help would be appreciated.

  See you soon,.

  Alan

  You should ask this in the Technet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I get a "cannot add that email address" when you try to add a new user. I have enough licenses available.

  I get a "cannot add that email address" when you try to add a new user. I have enough licenses available and was able to add more users later without error.  I have 3 email address that returns this error message.  I tried to add each several times that produced the error message every time.  Connected out of the session and back on and the error message every time.

  It is likely that these e-mail addresses already exist in the eSign environment and you are not allowed to add these emails.

  Please contact support about it, which can help with that.

• I have a subscription to creative cloud for 2 other colleagues and myself, but cannot add 2 other colleagues as users. How can I do this?

  I have a subscription to creative cloud for 2 other colleagues and myself, but cannot add 2 other colleagues as users. How can I do this?

  American salvation,

  I checked your account and found that you have just 1 place in your creative cloud account. You must add a license from the upper right corner on your team admin page.

  You can follow the article: CC help | Manage your creative cloud to the membership of the teams who will help you add a license in your team account.

  Let us know if you face any trouble while doing this.

  Thank you

  Yann Arora

• Cannot add permissions for users Active Directory - the directory access error

  Hi all

  VCenter, connected as long as user with administrator privileges on the server, Active Directory running I am can be used to add permissions for domain accounts and just get errors:

  Right-click on the data center & gt; Add authorization & gt; Select read-only & gt; Add users and groups & gt; Select the domain & gt; (the list is NOT populated with users)

  Among users, enter my account of user AD & gt; Click on check names & gt; "The following names are not found: xxx".

  Enter the AD user account in the search box & gt; Click Search & gt; "A general system error occurred: directory access error.

  The only son I can find or KB articles relate to the modification of the period of Active Directory.  I did, but it did not help.

  http://communities.VMware.com/thread/14150

  http://KB.VMware.com/kb/1010094

  Any ideas why I can't delegate permissions? I do not think we have group policies that are resticting access, but I don't know which of the log files I should I seek to find the real problem.

  Thank you

  Kevin

  Windows Server 2003 R2 Standard Edition, vSphere Client 4.0.0 build 162856, vCenter Server 4.0.0 build 162856, ESXi 4.0.0 build 181792

  The problem that I had was related to what service vCenter services were running as.  No doubt during the installation (for some reason that escapes me now) I had configured the VMware VirtualCenter Server and VMware VirtualCenter Management Web services run under the local administrator account.  Change these so they ran as system Local solved the problem, and then I have a list of domain users and assign them permissions.

  Kevin

• WNDAP360 / WMS5316 - cannot add AP since the firmware

  Hi we have just updated the firmware on our access points (WNDAP360) 2 and cannot add them in the WMS5316 (ProSafe 16ap)

  I tried to perform a reset, it locates the device, but the progress indicator just to 0% with the rotation of graphics. The Web page times out. Ive left it 40 minutes

  I also manually configured on the same subnet, unused IP and tried to add through discovery of intellectual property

  This seems to have happened since the updates of the firmware:

  WMS5316 is on 2.1.5

  WNDAP360 are on 3.0.4.0

  Beforehand, they were always capricious to add like its never been clear what password to use. For reference, Ive tried our internal password that the group is configured for blank password and password password for example.

  I tried adding with new IPs and also the IP existing / default

  Everything I try, I can't do these Aps to add to the group / management system. Here are the recent errors in the system log:

  7 Oct 09:50:10 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 182 seconds

  7 Oct 09:50:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:52:04 LEYWMS01 syslog.info - MARK-

  7 Oct 09:54:10 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 180 seconds

  7 Oct 09:54:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:56:04 LEYWMS01 user.err ap_mgr_WNDAP360: AP 10.2.100.171 changed the status of success<0> offline: unable to connect to the server<-3>

  7 Oct 09:56:04 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:57:07 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:58:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:58:10 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 180 seconds

  7 Oct 09:58:10 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 09:59:10 LEYWMS01 user.err ap_mgr_WNDAP360: AP 10.2.100.171 changed status connection: unable to connect to the server<-3> to success<0>

  7 Oct 10:02:12 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 182 seconds

  7 Oct 10:02:12 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:03:19 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 17 seconds

  7 Oct 10:05:17 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 19 seconds

  7 Oct 10:06:16 LEYWMS01 user.warn: WARNING: 192.168.0.100/images/product_logo.gif URL has had 184 seconds

  7 Oct 10:06:16 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:07:19 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 23 seconds

  7 Oct 10:08 LEYWMS01 user.info: access point [ip:192.168.0.100] [model: WNDAP360] added to list managed

  7 Oct 10:09:19 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 21 seconds

  7 Oct 10:10:19 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 183 seconds

  7 Oct 10:10:19 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:11:22 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 23 seconds

  7 Oct 10:12:04 LEYWMS01 syslog.info - MARK-

  7 Oct 10:13:21 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 21 seconds

  7 Oct 10:14:21 LEYWMS01 user.warn: WARNING: URL 192.168.0.100/images/product_logo.gif took 182 seconds

  7 Oct 10:14:21 LEYWMS01 user.err ap_mgr_WNDAP360: error condition, empty the queue

  7 Oct 10:15:20 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 21 seconds

  7 Oct 10:15:50 LEYWMS01 user.err ap_mgr_WNDAP360: can not deal with CPI since Timeout:Timeout has been reached<-4>

  7 Oct 10:17:21 LEYWMS01 user.warn: WARNING: URL 10.2.100.171/index.php?page=master&menu1=Monitoring&menu2=Wireless%20Stations&menu3=Wireless%20Stations&menu4= took 22 seconds

  Now solved

  Had to manually assign an IP address in the same subnet (which had already been done), and then restart the WMS service, then try and add it again. Connection is established and the progress indicator has increased. Several times he has failed when even at 40%-60% and said the authentication has failed. However he did at least change the IP address to the new so something was working.

  I have left alone and returned to him and he said connected. It seems that the synch plant just constantly but ends by develops. Then I changed the password / group, it says failed again and finally himself developed.

  Garbage

• Integration of the NAC Profiler - cannot add list of filters on cam

  Hi all

  I have a problem with the Profiler - integration of the NAC for endpoint profiling.

  Here's the situation:

  I have already created the integration based on the steps in the Guide: Setup Cisco NAC Appliance integration. I think that the configuration is correct, because I can do database synchronization between the Profiler and CAM. Here's the log of server profile:

  NAC_SYNC: Task_Queue_Runner commissioning
  NAC_SYNC: Profiler / END of synchronization of the NAC [add 0, upd 0, desc 0, rm 0]
  NAC_SYNC: Profiler / START the synchronization of the NAC
  INFO: [2010-12-15 11:01:09 (fcapGetHWAddr:49)] is for eth0 MAC

  I have already created a profile of endpoint named "Admin" which is based on the IP address. I also created the NAC events based on endpoint profile 'Admin '.

  The event of the NAC will present 'Admin' profile to a role of the NAC. This event aims to circumvent 'Admin' of the legalisation of the ANC visa so that the "Admin" can connect to the network automatically to a role of the NAC.

  However, when 'Admin' to connect to the network, it still is challanged by NAC. I don't see "Admin" on the filter of the CAM or the list.

  This means that the endpoint profiling is still broken.

  Is there anyone who have experience with this?

  Thanks for the support and comments

  Imad

  Hello

  You cannot add devices manually on the profiler.

  The Profiler has to detect automatically (it is the concept of profiling).

  How this Profiler detects endpoints use the modules of collector.

  Each module has endpoints detection means.

  You will find the description of each collector module here:

  http://www.cisco.com/en/US/docs/security/nac/profiler/configuration_guide/311/p_intro231.html#wp1062345.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.