Cannot adjust the brightness - model HP G62 363 TX - Windows 7 32 bit reinstalled

Hi gurus,

I reinstalled Windows 7 32 bit in my laptop HP G62 363 TX .

Now the brightness in the function keys button does not work. I am unable to find any option of adjusting brightness in the display section as well.

ATI Mobility Radeon Premium graphics card is missing. I tried to find the driver on the Site of HP drivers but this particular exe file is not present when clicking on it.

It's wrong to evil in my sight, and I am unable to work.

Help, please!

Hello

Try to download and install the version a little more early of the AMD software at the following link.

http://ftp.HP.com/pub/SoftPaq/sp50501-51000/sp50719.exe

After the installation is complete, restart the laptop.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Cannot adjust the brightness in point 8.1 of Windows for G510


    Its help me, thanks

  • Cannot adjust the brightness after display driver update on Satellite L855-118

    Hello.

    I just bought a SATELLITE L855-118, with ATI graphics card today, it was between this and another of them, but I know that you have problems updating graphics drivers on a portable Sony.

    I did a restore point.

    So I uninstalled the ATI catalyst graphics card and then did a sweeper driver and rebooted and then installed catalyst 12.6, installed fine, but my screen went to the maximum brightness and I can't adjust, BRIGHTNESS osd is displayed but the brightness of the screen does not change.

    So I used my restore point.

    This time I crushed the catalyst 8.9 with 12.6 stock, still cannot adjust the brightness.

    Someone knows how to solve this problem.

    My spec full in the link below.

    Satellite L855-118 - product specifications - Toshiba

    Thank you

    John.

    You mean that you can not use the Fn or Fn + F6, F7 button combination?
    Do other combination works properly?

    Also check this doc:
    http://APS2.toshiba-tro.de/KB0/TSB11033A0000R01.htm

    There is a brightness.zip that installs the additional registry key

  • Pavilion 15-r004ne: cannot adjust the brightness of the display

    I m using the Pavilion 15-r004ne on a windows 64-bit OS 8.1 and I cannot adjust the brightness of my screen. I tried to adjust by shortcut keys F2 and F3, tried adjusting via the mobility Center, tried through Control Panel and so on, but no response until now. It shows the little pop-up when I press the keys. But nothing has changed, the brightness of the display remains the same. in order to get solution soon.

    Thank you for your support. It didn't work either. I solved the problem of roll back the driver and update again.

  • Cannot adjust the brightness in Windows 7

    I have recentlly installed win 7 rc on my G530 and I cannot adjust the brightness and more. I have download the hotkey driver features that now allows me to adjust the volume and everything but the screen brightness... y at - it a specific driver, I need to download for this? Thank you.

    Nevermind I solved this isue. I have download Lenovo Hotkey features and executed the file as administrator with Vista compatibility mode:

    http://www-307.IBM.com/PC/support/site.WSS/MIGR-68000.html

    problem solved. I also updated the bios.

  • 15 - r254nu:. Cannot adjust the brightness on Windows 8.1

    So I tried different ways to resolve this issue, but again the light cannot be turned on/off. Help, please!

    Hello:

    There are two Intel driver links to the choices on your laptop support page.

    I explored the folder of the driver of this driver file to support your laptop and driver page, and it is suitable to use driver.

    This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

    File name: sp69589.exe

    The hardware ID for the Intel graphics card in your laptop must be one of these...

    ;=====================================================================
    ;    Windows 8.1 install
    ;=====================================================================
    [IntelGfx.NTamd64.6.3]

    % iVLVGMT0% = iVLV2M_w81, PCI VEN_8086 & DEV_0F31 & SUBSYS_220F103C
    % iVLVGMT0% = iVLV2M_w81, PCI VEN_8086 & DEV_0F31 & SUBSYS_2213103C
    % iVLVGMT0% = iVLV2M_w81, PCI VEN_8086 & DEV_0F31 & SUBSYS_2210103C
    % iVLVGMT0% = iVLV2M_w81, PCI VEN_8086 & DEV_0F31 & SUBSYS_2214103C

    You should see a device from Intel HD graphics instead of the graphics card base of Microsoft, and unless you can get the graphics driver to install you will not be able to adjust the brightness of the screen.

    Is the above driver do not install the Intel graphics card automatically, try to install the driver manually by navigating to the folder of the driver that is created after running the above file.

    Confirm that the hardware for the Intel graphics card ID matches one of the above since the driver installation information file that I posted.

    To find the ID of the hardware, Device Manager, click the graphics card Microsoft Basic.

    Then click on the Details tab in the upper part of the window Microsoft Basic graphics card.

    Now you should see a drop-down list of property and it is set by default to the Description of the unit.

    On this list and select the 3rd point (Hardware ID).

    Confirm that the hardware ID, you see there is one of those listed that I posted.

  • Qosmio G30-140 - cannot adjust the brightness of the screen on Windows 7

    Hello

    I installed Windows 7 on my Qosmio G30-140, but I can't adjust the brightness settings.
    Instead of allowing me to place the cursor on any position, I want that I'm stuck with only 3 steps which elect to.
    The last of them is way to bright and my eyes keep tear having to deal with this crazy amount of white, especially on white background.
    The other two are very, very dark.
    What is going on? I installed the right Nvidia drivers.
    Also, I can't adjust the brightness using the FN keys on my keyboard. They simply produce no result at all.

    Need help appreciated, I can't work like this.

    Thank you!

    Hello

    The brightness of the display can be controlled by the FN + F7 and Fn + F6.
    I think you should install the VAP and buttons of the Support of Flash memory card utility in order to get this to work!

    Check the added value Package and Support Flash Card which are released for Satellite L500 utility or new models of laptops.
    In my case it worked!

  • X 1 yoga: cannot adjust the brightness

    I can't adjust the brightness on my Thinkpad X 1 of Yoga. I ran all the updates driver, lenovo used and everything is up-to-date, including the BIOS. No matter what I do the brightness will either increase or decrease.

    It is stuck on its maximum intensity, so is not too bad, and I would be reluctant to send in for repair and lose a week or work to get it fixed. Anyone can suggest that might help the wise software?

    Thank you!

    Moderator Note: added the object model for better visibility.

    In response to the customer reports that the brightness of the screen can be controlled via a key entry on X 1 Yoga ThinkPad, Lenovo has released a fix. The patch is a registry change to restore this function.

    The patch can be downloaded here: http://support.lenovo.com/us/en/downloads/ds118463

    A permanent fix will be delivered with the Intel driver in a future release.

    Thank you

  • HP 15-f039wm: cannot adjust the brightness

    Recently upgraded to windows 10. were not able to adjust the brightness since then. I tried brightness buttons, charms, battery settings bar, may not yet have changed.

    Also I accidentally disabled graphics card base in the "Device Manager". I turned on again and changed the resolution. Now, it seems that my pc is only in landscape mode when the BDA is disabled. Tried using the button on the screen (F4), says I can't because screen project that the driver is not installed.

    Help!

    Hello:

    I explored the files of the graphics driver Intel W10 on support of your laptop and driver page, and it's one you need for your specific hardware configuration...

    This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

    File name: sp72194.exe

  • Cannot adjust the brightness of the screen after the new installation of Windows 7

    I have a Pavilion dv2945se notebook. I have completely updated the Nvidia geforce 7150 m drivers. My laptop came with Windows Vista Home Premium 64-bit, and I did a new install of Windows 7 Home Premium 64-bit. I can't adjust the brightness of the display. I narrowed down the problem to the generic PnP Monitor driver. How can I solve this problem?

    Edit: I mean "impossible to adjust the brightness of the display" that every time I go into power options and trying to use the cursor, Windows Explorer crashes. Also, my fn + F7 and F8 keys light work before I connect to windows, but not after. I think that something will charge when I connect to windows that is causing the problem. So I went in Mode safe, but then all that allows to control the brightness has not loaded when I went into safe mode, which was not helpful. I also went into MSConfig and disabled all startup programs, but again, I have the same problem. The brightness of the keys work before connect you to Windows, but not thereafter.

    When I turn off the device generic PnP monitor (1) can't adjust the brightness at all and (2) the Power Options window stops freezing. That's how I've narrowed the problem to the generic PnP Monitor driver.

    I finally solved this by uninstalling the driver for the ALPS touchpad. Because there are no Windows 7 drivers for my laptop even though it is listed in the models capable of upgrading to Windows 7, I used Windows Vista touchpad drivers. It was the cause of my problem with brightness adjustment. I don't know why it worked, but I've narrowed it down by disabling all processes start and then from their one at a time to see what caused the problem. As soon as I started Apoint.exe, I started to have problems.

    Now, I just have to find a way to disable the touchpad tapping without the ALPS drivers.

  • Windows 7, cannot adjust the brightness of the screen.

    I just upgraded from Vista to Windows 7 on my laptop Acer Timeline 5810. Now I find that I can't adjust the brightness of the screen by pressing the "Fn" and arrows. I used to use this function a lot and my screen doesn't seem as bright as it did before installing 7.

    I can fix by going to control panel > display > brightness etc, but I would prefer if my normal keys were working.

    Any ideas, anyone?

    It is a function of the keyboard drivers custom on all laptop computers the most. HP called launch fast, not sure of Acer.

    You must log in to the Acer website, search for your model and see if they have a keyboard driver for your model laptop for Windows 7

    Eyes - Dave

  • Cannot adjust the brightness of my screen. It is located at full speed and my dough goes super fast.

    My Sony Vaio w/Windows 7 recently crushed and Geek Squad put in a new hard drive. Everything works fine except that I can no longer adjust the brightness on my screen. It is located at full speed and my dough goes super fast. Please help me solve this problem. Thank you!! :) - AdamH

    Original title: help! AAARRRGG

    They installed drivers for devices from Windows 7 for your make and model. If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

    Sony: http://esupport.sony.com/perl/select-system.pl

    Another way to find your computer manufacturer's support Web site.
    http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

    Also to check the graphics card Sony or download site of manufacture for the latest Windows 7 drivers for your card.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

    J W Stuart: http://www.pagestart.com

  • Unable to connect to wifi and cannot adjust the brightness in hp pavilion 1322tx g6

    Hello guys. I can't connect to wifi after that I installed win 7 64 bit on my hp pavilion 1322tx g6. Wireless light stays red. He is not white. and I can't adjust the brightness too. the same operating system works very well on my desktop. in the Ethernet controller network controller driver manager and other things are missing. Win 8 64-bit work very well on this laptop. Please someone help me...

    Operating system Windows 7 does not have drivers for the hardware of this unit. your office may be a little older had so drivers win7 disc itself. also windows 8 has most of the current hardware drivers, it works well too.

    for win7 64-bit, you must download all the drivers from hp.com and install on your laptop.

    Here's the direct link...

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5227785&prodTypeId=321957&prodSeriesId=5186808&swLang=13&TaskID=135&swEnvOID=4063

    Incase you have trouble in direct link, here are the steps to download drivers for your PC.

    Hello

    Please visit www.hp.com/in and click on support & drivers > drivers & software > type the full model of your PC as the 6100 dv6 dv6-3100 etc... Select your computer model (if the list), or model CTO (for example, dv6-6100 CTO) (who works for the series) now select the operating system you are running. you have the list of drivers for your PC.

    I hope this can help, good luck!

  • Cannot adjust the brightness of the screen after Windows 8.1 update

    Hello

    After you have installed Windows 8.1, I can't adjust the brightness of the screen more.  I checked and updated all the drivers and nothing helped.  There used to be a brightness slider in the control panel in the power settings.  It's over now.  I've looked everywhere for a solution, but I can't seem to find it.  Any help would be greatly appreciated.

    Here are the specs of my computer:

    HP Pavilion 23-F213W Smart Touch

    Windows 8.1

    Thank you

    Many All in One computers are able to use HP MyDisplay in this http://www.portrait.com/dtune/hpc/enu/index.htmlplace.  There is a list of maps videos supported on this page and should help to restore the video controls setting.

  • I cannot adjust the brightness of my screen

    I can't adjust the brightness of my screen...
    Please help me

    Hello

    Try to use Recovery Manager to reinstall your particular graphics driver (AMD, Nvidia, Intel etc.) - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

    Recovery Manager - Windows 8.

    Recovery Manager - Windows 7

    Recovery Manager - Windows Vista

    After reinstalling, restart the laptop.

    Kind regards

    DP - K

Maybe you are looking for

  • How to display lists of reading mode Albums or Genres?

    I manage a large number of playlists and drag the songs from the albums. Is it possible find my Playlists in the left pane, while in Albums or Genres in my music?

  • Get the value at a specific frequency

    Hello I'm new to LabView. Now I have a task to develop a vi that can add value at a specific frequency automatically. There are two channels of signals. These data are produced by an external generator with scan function. These signals, therefore, wi

  • try and down load some new fonts and he repeats to me a virus deleted

    I can't download anything to my laptop trying to down load some new fonts and he continues saying a virus removed, ive done a scan of my laptop and no lie

  • Transfer to folder/file on an external hard drive.

    Hi, I was faced with a problem when you try to transfer a file at random on an external hard drive.The error message says something like, "file too large", or something like that, and I understand that I might be a little big seeing one I tried with

  • Invoke the application using the link

    Hi all, I'm calling my application for the bb.action.VIEW and bb.action.OPEN actions using uri with custom file extension (file:// scheme) by sending the same app on another device uri, in this process after acceptance and download I am able to perfo