Cannot answer calls when the screen is active

Similar Questions

• cannot answer phone when the screen goes black

  I have the PE. I also have the unchecked box that says to finish the call with press the button (when the screen times out). How can I answer a call once the screen has expired without pressing a button that ends the call?

  
  

• which method is called when the screen has lost focus but stays on blackberry?

  Hello

  I want to know in which method is called when the screen has lost focus, but always visible BlackBerry?

  For example, a screen is in the foreground and we disply dialog box so that the screen is visible but not to focus, therefore, at this time that methos called when we close this dialog box?

  Please, help me please please

  Override the following methods in your class to screen according to your needs

  1. when the screen button to the stack

  Call

  onDisplay() or

  onUiEngineAttached(boolean attached) - so attached is true then your screen is at the top of the screen

  2. When you are in a backlight and the lcd screen turns off to your state of rest and turns on again when you actively use this form

  call

  onVisibilityChange(boolean visible) - if visible is set to true, then you get the focus when the lcd display turns

  3. when your application moves to the background by clicking the red end button (i.e. without quiting the app, yet yours is active in the background)

  call

  onExposed() - when your application comes to the foreground of the background or during any type of screen that is in the top get popped

  & call

  onObscured() - when your application moves to the background, or when a screen pushed above your current screen more

• Detect when the screen goes black (standby mode)

  Is there a way to do this?  OnObscured does not seem to be called, that makes sense.  I couldn't find anything on the forums about this.

  Thank you.

  Thank you guys.  In fact, I realized that onVisibilityChange is what I'm looking for.  It is called when the screen goes black and when the screen is popped.

• delay in response time when answering calls so that the screen is active (xperia z5)

  When a click 'reply' during the screen is active, it fails the call as expected. It sometimes takes a few attempts. There is a known issue on Android 5.1.1 (Build number 32.0.A.6.200)

  Developer the activated options. See the option key is enabled. I can see to the touch, but answer the phone software is delayed.

  I ran the following tests:

  Operating time

  The screen locked (idle screen): immidiate response

  Screen in use (youtube): 4 keys (4 seconds) to answer or refuse

  Screen in use (whatsapp): 3 keys (3 seconds) to answer or refuse

  Active Screen (home screen): 1 touch (3 seconds) to answer or refuse

  Links: https://support.sonymobile.com/gb/xperiaz5compact/userguide/Receiving-calls/

  Is there a fix or is there an update to correct the offset.

  Thank you

  @z5_sach

  then its probably a third-party app act up

• Cannot answer calls to a locked screen

  I have an iPhone 6 s more.  When my monitor is locked and a phone call comes, he says "Swipe to answer."  I drag, but all I get is a red phone icon, not the Green allowing you to answer the phone.  What I am doing wrong?

  The "red phone" icon means you have answered the call. The Act of swiping is all you need. The acceptance/rejection of the buttons display only when the screen is unlocked.

• Calling a function only when the State is active

  I turn to find the event just to call a function only when the status is active. In fact, I created a State to display the 'product details' click and once the system changes to this State - I have to perform a function.
  
  Here's the context:
  
  Let's say that you are on the home page where you will need to click on a product to see details. By clicking on the product, the State to view the details of the product will be activated and a variable inside the new state you will receive all the data (from the class of product). But I discovered Flex run all States at the beginning and we need to watch how declare our function to make sure that we do not have a null to a variable/object reference. Given that value is moving to the State only when the click event to occur, the process of globalization, execution of all States at the beginning will not have any value yet (for the specific product to deal with in the State of the productDetails). So I can't use creationComplete to perform a simple function like setSpecs(), where all the values (for example, width, height, circumference, diameter, price, etc.) will be instiate specific labels.
  
  What event to use to call a function internal once we are in the State? Just using the creationComplet and stated if he check the currentState = that I have to work on is not enough. I tried 'activate', 'show', 'enterStage' and many others, but without success. I tried to search the Internet, but it seems that this problem is not popular enough to generate sufficient results.
  
  But I know that it is possible in the case otherwise it will be is not logical and since Flex work very well with the event, I found the right event. It's something basic I know, but when you do not know, it seems difficult to find! ;-))

  Thanks Greg!

  I agree, this is a better method. So I'll change my SENSITIVITY to use viewStack instead of the State. But the problem persists what that, if we use the viewStack State to launch an event only when the State/viewStack is displayed on the screen.

  I found something that works very well for me: updateComplete.

  First of all, I found this before reading your information about viewStack so it worked very well for the method of the State. That I decided to do a test to viewStack and made the necessary changes to the code to reflect a viewStack navigation and make sure the updateComplete was not within my component (stateProduct.mxml). The system was not able to view the specification as the setSpecs() function was not instantiate when displayed. I added the updateComplete = "{setSpecs ()} ' and everything worked great!" So I conclude that no matter if you are using a viewStack State, the updateComplete event can be used to run or functions only when the component is displayed on the screen.

  Now, I have to make my transition between the State working with viewStack effect! ;-))

  Thanks to Greg for this useful tip!

• Need for a method to be called when the pop-up screen

  Hello

  I have a requirement in my application. I have a screen from which I'm moving to screen B. When I Pop the screen B, I need a method that must be called in the screen has. Looks same as onActivityResult() in Android.

  I am currently using onExpose(). But this method is called for all in the screen has. In the menu click or button also. Is there another way to do this?

  Help, please...

  You have two options I can think immediately, which do not have to change anything in screen B.

  (1) use pushModal when you call B screen.  The statement immediately after the pushModal will be executed as soon as B screen is popped.  In general, I try to avoid the modal screens, but in this case, it's probably what I would do.

  (2) set an indicator immediately before you tap screen B.  Test the flag in onExposed().  If the flag is not set, then the onExposed was called for another reason and you can ignore it.  If the flag is set, then turn him off and process you want, knowing that the screen that has been exposed as screen B jumped.

  Either should work for you.

• Default method of workflow activity is not called when the Page refreshes

  Basically, try to call a script function java front page of fragments of the charges.

  INSTALLATION PROGRAM:

  Jdev 12 c

  TF defined with a default activity that invokes a page fragment.

  The activity of default method calls a method to support bean which inturn calls the method init java script before the fragment on the page doesn't load.

  This TF is in a container jsf page.

  During the loading of the page containing the first activity of the method is called and js function triggers and then fragments of charges which is the desired behavior.

  PROBLEM:

  When I refresh the page by pressing F5 or by running the page again on the same window of the browser activity method default IS NOT gets called which inturn will not trigger the js call.

  But when I run the same page again in a different window it works and then subsequent updates or page load activity IS NOT of default method is called.

  If it is not provided? The default activity is called when the workflow is updated.

  Check outhttp://www.oracle.com/technetwork/developer-tools/adf/learnmore/108-triggerpopupinregion-1994836.pdf which should work also in your car.

  Timo

• BlackBerry 10 Z10 freezes during call if the screen is pinched or zoomed

  I applied the update to the software BB Z10 (10.2.0.424).  Since the update, a new problem appeared which is serious enough that I now plan to roll back the update.  Obviously, however, I want to avoid if possible the rollback.

  During a phone call, if the screen is 'stuck' or 'zoom' or generally offered by those applying the finger across the screen, the screen then freezes.  The phone call (not continue), but no touchscreen function can be used, and therefore the appeal cannot be done, the keyboard cannot be used, etc.  Sometimes just the skin on my face, touch the screen of the phone is enough to cause problems, but more often it is when I try to press the button end on the screen (and inadvertently move the screen when you press the button).

  Once the frost has occurred, the only way to end the phone call (and effectively address freezing of the screen) is a soft reboot by holding down the power button.  To indicate what is obvious, it is very irritating, especially given the time of long reboot of the Z10.

  I did some research on Google and the search for keywords related to my question without a bit of luck and surprised not to be able to find no matter what other people discuss this issue or is it just me? ! ? ! ?  I tried to reset the device and prefer not not for all the usual reasons.

  Appreciate any help/pointers that anyone can offer.

  If you have a similar problem and have stumbled across this forum announcement, I can now report the cause and the fix for this 'problem '. In my BlackBerry settings for accessibility, the function named Mode magnify was lit to. I must have turned on that when you play with my phone during installation (seemed like a good idea at the time). Completely turn off the Mode magnify has solved the problem. Luckily I don't have a disability, but might seek to improve this function for people with disabilities with magnify Mode activated BlackBerry do not know the problems I have with the device of freezing because (inadvertently) expand during phone calls.

• Bluetooth freezes when the screen turns off

  Having a problem with the Bluetooth on my pre. I coupled it with a Plantronics Voyager 855. Initial pairing works very well, but after the screen on the pre turns off, the connection goes bad. When I turn the screen back on, the Bluetooth application on the phone always displays the connected headset, but it is not. If I try to play music, there is no sound, and if a call comes in, I can hear the person on the phone, and not on the helmet.

  About 30-45 seconds after the screen turns off, I hear the high tone of the headset which means that it has lost connection. I don't think that the headset is bad. It worked very well with my previous phone.

  If I have music when the screen turns off, the connection is very good. It's like, when there is no active communication between the phone and the headset, and the screen turns off, the bluetooth on the phone goes into a blocked State. I can restore the connection by turning off bluetooth on the phone and then on again. It reconnects to the helmet, until the next time the screen turns off.

  I tried this to get a better idea of the problem...

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > put the headset in pairing mode, it pairs fine.

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > turn off the screen > wait 45 sec > turn on the screen > put the headset in pairing mode, then it does not.

  Again, it is like turning off the screen causes the bluetooth of the phone hang. Given that the screen turns off fairly quickly, I basically disable bluetooth phone and back on every time I want to use it.

  Any thoughts?

  My problem is solved.  Turns out that I had a defective unit.  He traded last night, and it works fine now.  Got the yellow box this time.  First of all, we had the black cover.

  The swap was a little complicated.  I bought in a store of absolute Wireless in Garner, North Carolina.  It is a reseller of third party.  They did it to a Sprint service center to have a technician "certify" the default before they would replace it by car through the city.  And of course, the service center couldn't do the replacement, so I had to go back through the city to the point of purchase after they certified it.  Best of all, the procedure of "certification" involved explaining the problem to the technician for about a minute, she agreed with me that it was malfunctioned and his writing his employee with the ID on the back of a business card to bring back me to the first shop.  She has not yet turn the phone on itself.  She said pretty much the guy to the absolute Wireless has been a * beep * by sending me to it in the first place b/c, we could just do this by phone.  PITA BREAD.  But I suppose it is, that's what I to do not buy directly from Sprint.

• I want to activate my window vista business, but when the window is activated, I have a problem and it is error code is 0xC004C020

  I want ro activate my vista Enterprise window, but when the window is activated, I have a problem and it is error code is 0xC004C020

  Visit: http://www.microsoft.com/genuine/diag/> and click on "start the Diagnostics.

  `~`

  0xC004C020 error code

  Symptom

  When you try to use a MAK to activate one or more computers, you may receive the following error message:

  0xC004C020
  The activation server reported that the Multiple Activation key has exceeded its limit.

  Cause

  The MAK has exceeded the activation limit. By design, MAKs have a limited number of activations.

  Workaround

  Contact the product activation call center to obtain a new MAK or to increase the limit on the existing MAK activation.

  `~`

  What type of license you have?

  If you have an OEM or FPP product, then you should have your license key on your computer or on the packaging. Contact the Microsoft Activation Center to find out if your product key is valid:

  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4. take the phone activation option and brace yourself for a real person.

  `~`

  During the activation of the phone

  Go to Start

  Click run

  And type SLUI 05

  In the drop-down list, select the name of the country you live. This is important because depending on the country you select, you will assign a number to call.

  Click the nearest location > United States

  Click Next

  This window contains all the information you need.

  Step 1 contains the number you call.

  Step 2 contains a series of unique numbers, you will need to provide the series of numbers to the operator (don't make any mistakes).

  Step 3 If everything is Ok, the operator will provide you with a confirmation ID, you will need to enter numbers in the boxes in step 3 and press ENTER.

  Activation of the telephone process is simple, try to use common sense in his answers.

  If the confirmation correct what ID provided it must be welcomed by a new window confirming a real installation.

  UTC/GMT is 23:00 on Saturday, November 19, 2011

• Pre Bluetooth crashes when the screen turns off

  Having a problem with the Bluetooth on my pre. I coupled it with a Plantronics Voyager 855. Initial pairing works very well, but after the screen on the pre turns off, the connection goes bad. When I turn the screen back on, the Bluetooth application on the phone always displays the connected headset, but it is not. If I try to play music, there is no sound, and if a call comes in, I can hear the person on the phone, and not on the helmet.

  About 30-45 seconds after the screen turns off, I hear the high tone of the headset which means that it has lost connection.

  I don't think that the headset is bad. It worked very well with my previous phone.

  If I have music when the screen turns off, the connection is very good.

  It's like, when there is no active communication between the phone and the headset, and the screen turns off, the bluetooth on the phone goes into a blocked State.

  I can restore the connection by turning off bluetooth on the phone and then on again. It reconnects to the helmet, until the next time the screen turns off.

  I tried this to get a better idea of the problem...

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > put the headset in pairing mode, it pairs fine.

  If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > turn off the screen > wait 45 sec > turn on the screen > put the headset in pairing mode, then it does not. Again, it is like turning off the screen causes the bluetooth of the phone hang.

  Given that the screen turns off fairly quickly, I basically disable bluetooth phone and back on every time I want to use it.

  Any thoughts?

  My problem is solved.  Turns out that I had a defective unit.  He traded last night, and it works fine now.  Got the yellow box this time.  First of all, we had the black cover.

  The swap was a little complicated.  I bought in a store of absolute Wireless in Garner, North Carolina.  It is a reseller of third party.  They did it to a Sprint service center to have a technician "certify" the default before they would replace it by car through the city.  And of course, the service center couldn't do the replacement, so I had to go back through the city to the point of purchase after they certified it.  Best of all, the procedure of "certification" involved explaining the problem to the technician for about a minute, she agreed with me that it was malfunctioned and his writing his employee with the ID on the back of a business card to bring back me to the first shop.  She has not yet turn the phone on itself.  She said pretty much the guy to the absolute Wireless has been a * beep * by sending me to it in the first place b/c, we could just do this by phone.  PITA BREAD.  But I suppose it is, that's what I to do not buy directly from Sprint.

• How can I save by iPad 3 when the screen is black and nothing appears?

  How can I save my iPad in ITunes or iCloud 3 when the screen is black and nothing appears?

  Is the empty screen, because just the screen is broken, or is the iPad just dead? Have you tried a soft-reset/reboot it?

  At least you can see what you touch on the screen of the iPad, you cannot force a backup to iCloud.

  If the iPad still works and is connected to wifi, a backup should automatically happen (if iCloud backups are enabled) if it is connected and the locked screen.

• Music app does not work when the screen is closed!

  Android6.0.1

  Compact Z5.

  When I listen to the music in the music of sony and closed the screen app, music will play a minute and stop, even when I turn the offshore endurance and add it to the white list, but it doesn't work.

  Other applications that can play music also encounter this problem. Some applications of music need wifi, they cannot work when the screen is too closed.

  What can I do about it?

  I think also ultra endurance disables many apps, so my guess is that you have a 3rd party app that close somehow your applications when the phone goes to sleep.