Music app does not work when the screen is closed!

Similar Questions

• Why my music app does not work after the last update yesterday?

  WWhen by clicking on the app, it crashes just forever

  Well, I found a solution short term up to what Apple solves it on the next update of the firmware.

  1. double-click on the button of your home that opens your "tasks for applications Manager.

  2. close the music app.

  3. turn on "airplane Mode".

  4. click on in your music App

  5 turn off "airplane Mode".

  Do not close your music App (in the Manager of tasks for the apps) that he'll recover music App and you will have to start the entire process.

• Flash does not work when the screens are deployed

  I use the latest version of Flash CC and now when I try to draw using my tablet in flash it causes traces from brush hang the canvas, it only works if I duplicate screens. How can I fix it?

  He is a current and documented issue that flash continues to have. I do not remember the answer (if found), but I suggest you do a search in the forums here, the question at least once a week.

• Portege M200 - pen does not work with the screen

  So I bought a pen for M200 and reinstalled the operating system.
  Now I M200 with Windows XP Tablet PC edition, a utility Screen Rotation and usefulness of the stylus button. Now Pen buttons work fine with my new pen, but the screen itself does not work. I mean, the stylus does not work with the screen.

  I have a mouse, and another menu pointing devices in Device Manager and it includes the following submenus:

  HID compatible mouse (I use the random DELL mouse)
  Mouse PS/2 Cimpatible (?)
  --------

  I think there must be something else...
  Please tell me, forum, what drivers should I download to get the pen to work?

  Stand by. Are you using the original image of recovery Toshiba (operating system) or you have installed your version?

• my photo does not work with the screen saver

  Photos has never worked on Apple TV 4 until today with the 032116 update, but my pictures does not work with the screen saver.

  I dare you to try to tell me how to make it work. Please have a solution, someone.

  Given that Apple isn't really care or help on these forums, it would be great if someone mentioned the steps.

  Thank you

  Can you elaborate on the question?

  These are user forums and this is why you will not see the participation of Apple here

• iPhone 6 s think is store songs, but the music app does not work

  I've upgraded to an iPhone 6s, and I restored it to my backup so that all my contacts on my phone.

  I do not keep the music on my phone because it takes place, and I can just listen to my library of music to iCloud. However, each song that I play, my phone displays I'll keep the songs on my phone, but the music app always said that I don't have any songs downloaded on my phone. I'm especially worried about it because I had a problem with my previous phone where I didn't keep all the music on my phone, but for some reason any much space was taken over on my phone. I fear that my phone will fill with songs, but not recognize them (which can be irrational, but who knows). In any case, here are a few screenshots to show you what I'm talking about is about, what happens to someone else?

  1. you can see it says there are "59 songs" on my phone

  

  2. when I go to music app and search for downloaded music...

  

  3. it's screen (which indicates that I did not download the music on my phone)

  

  4. after a few minutes of songs, has increased the number of "Songs on my iphone..."

  

  ... And when I go to the "manage storage" section in the settings, the music app does not appear as an application that takes place (because apparently there isn't any music inside)

  I'm worrying needlessly, or is my phone slyly fills with music?

  So I discovered that after turning off "iCloud music library" under the "Music" tab in the settings, it displays much fewer songs on the 'About' page (although I still have none), and it showed that I had more than about 1 GB of storage space. So, I concluded that indeed, while I listen to music from my library iCloud, he should secretly Store songs on my phone (and perhaps easier streaming later?), and turn off streaming iCloud removes these songs. This is exactly what I wanted to know, but at least I can the hypothesis a little more on what iCloud music is streaming.

• BlackBerry Webworks App does not work on the Simulator after conditioning

  Hi everyone, I ' ve developed a webworks app and everything works fine on the emulator ripple, but when I load it on the Blackberry (9860 and 9930) Simulator... it loads successfully (I can see the icon, etc.), but when I open it, appears only a WHITE SCREEN...!

  I thought it was the Blackberry Simulator, so I changed it (does not work)

  I thought it was my application, so I leave my fair "index.html" with a BLACK background (does not work)

  the Validation of my config.xml file is fine, and I have not any idea on how to solve this problem!

  Help please, thank you

  

  

  http://mundourbanohn.com/Simulator1.jpg

  Hello, thanks for people, but I already solved this problem, I had a div with POSITION: FIXED; and apparently WebWorks does not support this CSS property, so I removed it and everything works fine. Thanks in any case. Concerning

• Podcasts App does not work in the new mini iPad 2

  The Podcasts app does not work on my new iPad mini 2.  All other applications work OK. Typed on the results of the icon in an almost empty screen, with just a few shaded options along the bottom that do nothing.  There is a sign more in the upper left corner, tapping brings up the URL of the podcast application.

  I wonder if I should delete and reinstall the App (how?)

  Robin

  Well, the old farm and restart thing seems to have fixed.  Should try it before I posted.

  Robin

• States of error Spooler SubSystem App does not work when I print

  When I try to print anything it either tells me that the Spooler SubSystem App does not work.  How can I fix it.  I have reloaded my printer, but still does the same thing.

  Hello

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  The value of all Services back to their default values.

  Start - type into the search box-> Services find top - make a right click on - RUN
  AS AN ADMINISTRATOR

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Camileo P30 does not work when the 8 GB SDHC card is inserted

  Hello
  I just got a new camcorder Camileo P30.
  I also bought a card 8 GB class SDHC 6 100 'Lexar Premium' x
  And it does not work with the card inserted.

  Here are the symptoms:
  (1) when the card is not inserted I can do everything OK - take pictures and video, use the menus, it turn on and off.
  (2) when the card is inserted, the following occurs:
  2.1) I can't take pictures or video - it does not meet the pressed buttons.
  2.2) I can't access menus.
  2.3) I can't shut off again.
  2.4) I do not identify the amount of memory is available (shows only 0 recording time remaining).
  (3) I have tried different combinations of:
  3.1) Insert the card so that the camera is turned off.
  3.2) Insert the card so that the camera is turned on
  3.3) Insert the card while the device is switched on and in one of the menus.
  (4) the camera doesn't always work if I take the card again.

  During these expriments (#3), I was sometimes able to get a record time correct left (#2.4), but still #2.1 to 2.3 # were a problem.
  At one point, I was also able to "format" the card and subsequently, he showed a record very long time available (not matching only not to the size of the map) and #2.1 to 2.3 # were still in force (i.e. I couldn't use the camera or turn it off).

  Note to work around the #2.3 I took the battery.

  I was not yet looking for updated firmware, or connect it to the PC.

  Has anyone of you has met with such a problem?
  What did you do to solve it?

  Thank you.

  Hello

  Have you tried another card SDHC?
  I m not very well what is happening here, but I recommend you another card in this camcorder.
  I m P30 not owner but I have a: 30 and the camcorder reads without problems for 16 GB SDHC card. It works perfectly.

• LAN does not work when the Cisco E1000 router hangs

  Original title: Download sp3

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! I bought recently a new Cisco E1000 router. My computer is a laptop model Lenovo 0769.

  I am running windows XP with sp2. The cisco software requires sp3. I called support of cisco and even they couldn't get to download sp3. My network is wireless on the router and I had to install from another laptop computer on the system. My LAN does not work when hooked. What do you suggest to me.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi mdenrique,

  1. what exactly do you mean by LAN (Local Area Network) does not work? You get the error message?

  If you have not installed Service Pack 3, try the following steps:
  Step 1: Download Service Pack 3
  see How to obtain the latest Windows XP service pack .
  b. scroll the window and click on "Download now the Windows XP Service Pack 3 package" to download the service pack.
  c. save the file on the desktop.

  Step 2: Install Service Pack 3
  a. open the file downloaded and follow the instructions in the wizard to complete the installation.
  b. restart the computer once the installation is complete.

  For more information, see steps to take before you install Windows XP Service Pack 3

  Note: Once you have installed service pack 3, install the router and check if the problem persists.

  Step 3: To troubleshoot LAN, run home and small Office Networking Troubleshooter
  a. Click Start and then click Help and Support.
  b. under Pick a help topic, click Network and Internet.
  c. under network and the Web, click on resolution of networking or Web problems and then click on home and small Office Networking convenience store.
  d. answer the questions in the troubleshooter to try to find a solution.

  For more information, see the following articles:
  1 see How to troubleshoot a network in Windows XP
  2 see two resources to solve the problems of connection network in Windows XP

  Visit our Microsoft answers feedback Forum and let us know what you think.

• VerticalAlign VBox does not work when the child has the height in %

  Hello

  I got the code like this:

  <mx:VBox id="vb1" verticalAlign="middle">
  <mx:CheckBox .../>
  <mx:VBox id="vb2" height="50%">
  ...
  </mx:VBox>
  </mx:VBox>
  

  Effect is that verticalAlignment does not work for the 1st VBox (it seems to me that it is set to the default value - 'top'). It works when I remove property "height" of the 2nd VBox (or when I change to "50%" to "50" or any other number).

  Hi Ibarim,

  verticalAlignment won't work for VBox when you have two or more children and who are direct children. When you have only a single direct children of the VBox, then it will work. Normally we use verticalAlignment = "middle" HBox and VBox. As VBox sets out its children vertically this property does not work when you have children over 1.

  You can try this

  width="200" height="50%">
  
  
  

  The above two combinations work correctly you only have immediate children... But if you see the bottom of case...

       width="200" height="50%" backgroundColor="yellow" verticalAlign="middle">                                  
  

  Now, in the case above, you can see that VBox vb2 is vertically aligned middle in the vb1 vb2 VBox is the only direct child of VBox vb1. Whereas it is now in the vb2 VBox box and VBox vb3 are not aligned vertically in the VBOx vb2 as because VBox vb2 contains now two children.

  Hope this is clear and make you understand the problem.

  Thank you

  Jean Claude

• Flex app does not work when moved from the original location

  I'm doing a gallery of images in flex. It works when I run it in Flex Builder perfectly fine. Files html and swf works perfectly well open in any browser too, but ONLY when these files and all related files are open to the default location where the application has been generated in bin-debug folder. When I export a generation to another folder, the swf file loads but no other information from the display of the xml file. I tried to set all paths reference files (that is, the xml language) in the flex application to the absolute exact location on the server, and it did not work when I downloaded it on the server.

  I tried several approaches from scratch and they all arrive at the same question. I work with a teaching for Flex Builder License, I'm not sure if they jip you on those and ruin the compiled swf.

  Help, please! I'm losing my mind on that. I think it has to do with something else, in addition to the code because it works fine when I click 'Run', but if someone thinks it is helps for the zip code let me know.

  Often this is because you must add the - use-network = true compiler option in FlexBuilder menu bar:

  Project - Properties - Flex Compiler - additional compiler arguments:

  Add - use-network = true, and then recompile and post back to the server, should work fine.

  Note: If you create a "Release" version and move elsewhere on your local computer, you may need to add - use-network = true, and then recompile the application to access local resources outside the Flex Builder environment.

  If this post answers your question or assistance, please mark it as such.

• Problem - VGA output VGA or HDMI port does not work when the connection to the input of your TV

  Problem of VGA output - using an acer aspire 5520-5912 trying to connect it to the TV input - connect S-Video works well - port however VGA or HDMI does not work - 1 when I plug the VGA cable that goes to an entry of RD Gr Bl on TV, my screen goes black - as soon as I unplug the cable and press FN + F5 I get the screen back - if I restart the computer in order to have the computer to identify the external screen it will just a black screen when the priming. Troubleshooting using no external monitor is identified unless I use the S-video connection.  The Hdmi connection gives me the same result that the VGA - convenience store attempt will identify the computer screen.  OPSYS Vista. Thank you

  Hi cdk14031

  
  You have set display up-to-date drivers installed?

   

  Step 1 :
  To resolve the problem, you can check if the uninstall and reinstall so help display drivers.
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Step 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.

   

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  You can also check the support link and check if these help - below

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  I hope this helps.

• Smartphones blackBerry BUG: camera does not work when the lamp is on

  BlackBerry PRIV model STV100-1
  AAE016 (aospl-msm8992 69 qc8992_sfi-user output software version
  Android version 5.1.1
  Last updated on 1st March.

  Previous version of the software had the same problem and can be reproduced like this:

  (1) to any application other than the camera, drag down twice from the top and turn on the flashlight.
  2) press the squarre and switch to the camera application, which says now: "camera not available."
  3) slide down twice, turn off the flashlight and switch camera to the photo app, now there is no message, but the camera still does not work.

  (4) use the table to any other application, then the table to return to the camera application, which now works fine now that the lamp is off.

  If you attempt to try the above, when you are in the camera app, once you drag down twice, there is no icon to turn the flashlight.

  Hmm, that's an interesting and scary use case, please provide

  Someone else see this thread, if you want this functionality please like this post to express interest