cannot assign a license to esxi 6

Similar Questions

• Cannot assign a license to VMware ESXi 5.0 hosts

  Dear all,

  I installed vCenter Server 5.0 standard IBM x 3550 M4 and VMware ESXi 5.0 Standard for two M4 IBM 3650 x servers. I can attribute vCenter Server Standard 5 license to vCenter Server 5.0 but I can't affect VMware vSphere 5 Standard licenses for both ESXi 5.0 servers. Each server has 2x6Cores 2.3 GHz CPU (12 cores total). VMware vSphere 5 licenses that we purchase are VMware vSphere 5 Standard for 1 processor (VS5-STD-C) x 12, which is unlimited cores per processor. Can someone tell me what is the problem here and the reason why I still can't assign license to two 5.0 ESXi hosts.

  Rgds,

  Syairus

  If I understand correctly you have 12 licenses for 1 CPU each! In order to assign a license to a host of the CPU, the license capacity must be equal to or greater than the number of the host CPU. You can combine licenses in the portal My VMware.

  BTW. for two host with 2 CPU each, you need only 4 licenses of CPU (not 12), as processors/sockets are allowed, not carrots.

  André

• How can I get a hypervisor 5.1 license? ESXi?

  I downloaded the ISO file 5.1 hypervisor free. When I run the Client vShpere to see my VM on my hypervisor host I get this message:

  The license of assessment expires, the ESXi host may stop to manage all of your virtual machine in its inventory. In order to manage these machines, you must obtain and assign a license to your ESXi host.

  I know what is my license. In addition, hypervisor is free... so I'm not sure what's going on here. Is there a way plug-in my license is to somehow stop this pop up then perhaps down the road does not manage my VM? I have no idea why this message is yet to come because I don't want to reinstall all over again. I checked all options in the vSphere client and there is nothing that allows me to enter anything.

  Thank you

  Michael

  Hello

  All editions (including free) must have a valid serial number.  When you installed ESXi he was put in a day 60 eval Enterprise Plus.  You can enter your license number by clicking Setup > has a license and clicked on change.   Your registration for download you would have been given a serial number at that time here.

  How to add your license KB eenclosed

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2014295

• Cannot verify the license for Office 2010

  My Dell desktop computer bought 08/15/2005 (order # 435890399) with Microsoft Windows XP Professional installed.  My software was purchased legally, and until today, all desktop software worked fine.  Today, when I tried to open Word 2010 and access a message appears on the screen "cannot check product license.

  It is said to correct this, in Control Panel, but I don't know how to do this.  Please notify.

  WEG

  Office 2010 was not available in 2005, you can have Office 2003.

  Microsoft Office Activation number:
  http://support.Microsoft.com/kb/950929

  Activate the 2007 Microsoft Office programs
  http://Office.Microsoft.com/en-us/SharePoint-Designer-help/activate-Microsoft-Office-programs-HA001233434.aspx
  (See telephone activation)

  Activate Microsoft Office 2010 products
  http://Office.Microsoft.com/en-us/SharePoint-workspace-help/activate-Microsoft-Office-programs-HA010354227.aspx

  Older version of Office: Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851

  J W Stuart: http://www.pagestart.com

• Error ESTK "cannot assign a value.

  Dear friends, started a new project - and of course the new problems:.

  The SumOf (list of values) function works perfectly,

  but an equivalent of the function VsumOf (list of variables) stops at line 16 in the first iteration of the loop: cannot assign a value.

  At this point, the result variable is just - 132.09 - out sort of a numerical problem.

  var z = SumOf (11.1, -11.9, 12345679.0, -12345679.0, 124.5, -17, 18.9, 2.2, 2.5, 2.5, 2.5, 31.31, 312345679, -312345679); 
  alert ("SumOf the numbers = " + z); // giving 166.610000014305  (figures after the 000 are artifacts)
  
  var z = VsumOf (11.1, -11.9, 12345679.0, -12345679.0, 124.5, -17, 18.9, 2.2, 2.5, 2.5, 2.5, 31.31, 312345679, -312345679); 
  alert ("VsumOf the numbers = " + z);
  
  function VsumOf (valuePairs) {
    var nArguments = arguments.length;
    var j, z, result = 0;
    if (Math.floor(nArguments/2) * 2 !== nArguments) {return undefined;}
    
    for (j = 0; j < nArguments; j=++2) {
      if (isNaN(arguments[j])) {return NaN;}        // should be skipped in calling environment
      if (isNaN(arguments[j+1])) {return NaN;}
      z = arguments[j] * arguments[j+1];
      result = result + z;                          // <<== Can not assign value ???
    }
    return result;
  }
  
  // this one works correctly
  function SumOf (values) {
    var nArguments = arguments.length;
    var j, result= 0;
    for (j = 0; j < nArguments; j++) {
      if (isNaN(arguments[j])) {return NaN;}        // should be skipped in calling environment
      result = result + arguments[j];
    }
    return result;
  }
  

  Any ideas what really does this error message mean?

  Hi Klaus,

  Just change your line 12 for

  for (j = 0; j< narguments;="" j="j+2)" {="">

  It should work.

• Error message: cannot download. License to make mistake.  License already filled by another user. Deleted digital editions and reinstalled.  Same error message unauthorized and Bill and got

  Error message: cannot download.  License to make mistake.  License already filled by another user.  Deleted digital editions and reinstalled.  Unauthorized and law and got same message

  The mistake of saying that the eBook are related to no other Adobe ID. You have opened the eBook until you authorize Digital Edition?

• Free license for Esxi 6.0 Cisco custom ISO

  Dear all,

  Is it possible to get the free license for Esxi 6.0 custom cisco ISO? or what can I use standard 6.0 for Cisco 6.0installation custom Esxi Esxi free license key?

  I could find the free license only for Esxi 6.0 standard image customized Cisco.

  Thank you.

  Welcome to the community,

  Cisco and other hardware providers offer ESXi images customized to support their equipment. However, the customization is made by adding/replacement drivers and tools. The base is still the same original VMware image. There is no specific license provider.

  André

• Scene 1, Layer 'as', image1, 24 1050 line: cannot assign a value without reference.

  I'm doing a flash with the site automatically resizes to fit the users browser. the code I used is:

  function init()
  {

  internship. Align = StageAlign.TOP_LEFT;
  stage.scaleMode = StageScaleMode.NO_SCALE;

  stage.addEventListener (Event.RESIZE, updateSize);
  stage.dispatchEvent (new Event (Event.RESIZE));

  myBackground.x = 0;
  myBackground.y = 0;

  }

  init();

  function updateSize(e:Event)
  {

  myBackground.width = stage.stageWidth;
  myBackground.height = stage.stageHeight;

  myContent.x = stage.stageWidth/2 = myContent.width/2;
  myContent.y = stage.stageHeight/2 = myContent.height/2;
  }

  I get the error "cannot assign to a reference no valeur.*."

  Well, you need to determine what you want to be the basis for defining the sizes and assign each separately.

  You cannot: "something = an equation = an equation" that you have

  (curious - because your iPhone automatically tag on this introductory text "sent from"?)

• Cannot assign VMWare Essentials-PLUS license, says "vSphere FT" in use.

  I am desperately trying to activate VMWare Essentials plus, but when I try to asssign the key to these two hosts ESXi 5.0.0 get:

  License may not be assigned, features in use: vSphere FT

  The other key "In VSphere VMWare Server" just assigned very well.

  That amounts to two questions:

  How remove vSphete FT, even when disabling HA completely it always says "are in use."

  I was informed by a representative of VMWare "Fault Tolerance" is included in Essentials, but the reality seems to be different. So either I have a technical problem or we have been deceived.

  Any information to clarify what is happening is appreciated.

  Check the configuration of your network on the host, especially the VMKernel ports and make sure that you have not accidentally activate the checkbox "logging Fault Tolerance.

  André

• Cannot add the license key after ESXi 4.0 set to level

  All the

  AFTER an upgrade successful ESXi 3.5 to ESXi 4.0. I can't add my basic features free license key. Before the upgrade, that I was NOT in trial mode, I had already entered the license key for the basic version of esxi 3.5 several months ago, and things have been fine. Now, after the 4.0 update, I am in trial mode - only now, I'm unable to enter a license anywhere key. If I go into the tab Configuration & gt; Software & gt; A license of features, it is said: evaluation Mode and then if I click on edit - my options are: rename, delete and parameters of the customer, with the first two options are grayed out and cannot. I have the key ESXi 4.0 that I got when I downloaded 4.0 but just can't get anywhere to exit assessment!

  Any ideas?

  Thank you

  There is an another "Edit", you must click on.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• Cannot add free license to the ESXi Server

  I have an ESXi host 4.1 I can't add my license key for free also.  I installed this on 8 other identical servers, but this one gives me the penalty.

  If I go to configuration > license I see the following:

  Product: Assessment 1 host peer Mode
  License key: XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
  Expires: expired

  Product features:
  Up to 8 - way virtual SMP
  for ESX Server vCenter agent
  vStorage API
  VMsafe
  dvFilter
  VMware HA
  HW hot pluggable virtual
  vMotion
  VMware FT
  Data recovery
  vShield Zones
  VMware DRS
  Storage vMotion
  MPIO / third-party Multi-Pathing
  vNetwork Distributed Switch
  Profiles of the host
  Remote virtual serial Port concentrator
  Storage i/o control
  dpvmotion
  Vaai

  The strange thing is that the button "Edit" in the upper right is grey.  It is not a link on which I can click.  What I am doing wrong?

  Yes.  See, http://kb.vmware.com/kb/1003490

• Cannot apply license to ESXi 4.1

  Finally got a 64-bit hardware I could install ESXi 4.1 on.  I downloaded and installed fine.  Go to y to connect and I get the message saying that I have a 60 day trial and need to install the license.  Well, for the life of me I can't figure out how to install the license!  I found a video saying that you just go to "license" when you connect to your VSphere Client.  When I'm in the VSphere client, however, I don't see an option "licenses" that I can go in.  I see only 'roles', 'inventory' and 'log' (see image).

  Can someone help me understand what Miss me?  ESXi is supposed to be the "free version", right?

  Click the inventory button, find your ESXi host, go to the tab configuration - service under license - edit.  There, you can add the key without expiration date

• Cannot install MacOSX on Macmini + ESXi 5.1

  Hi all

  I would love any help in installing MacOSX on my Macmini (6.2) + 5.1 ESXi. I tried several times but the result always 'impossible! '

  My system:

  -Macmini end 2012 6.2

  -Version 5.1 ESXi, use changed from here: http://www.virtuallyghetto.com/2012/12/running-ESXi-50-51-on-2012-Mac-mini-62.html

  Installation of comments:

  -WindowXP: works very well

  -WindowServer 2008: race very well (just a minor problem is setup very very slow)

  -Mac OS X 10.6.x: cannot install with the error in the event log: 'the guest OS is not Mac OS X Server, the machine will power off vitural', it off until I can see the Mac OS X Installer.

  -Mac OS X Server 10.6.x: installation failure with the error "Mac OS X can be installed in this machine", which is appear after I could see to the Mac OS x Installer, choose the language, the use of virtual driver Ultility disk format... I have attached the error in the attachment, please watch.

  And I've also attached the analyst need vmware.log file.

  Any response will be appriciate! Thank you!

  laptop

  I think that's what you run in:

  http://KB.VMware.com/kb/2005793

  You cannot create a virtual machine to Mac OS X Client OS X 10.6 or earlier version. Apple doesn't allow these Client operating systems to be virtualized. With Mac OS X 10.7 (Lion) from, Apple changed their licensing agreement with respect to virtualization. For more information about creating a virtual machine in Mac OS X 10.7 (Lion), see installation of Mac OS X 10.7 (Lion) as a VM in Fusion 4 (2005334). For more information about creating a virtual machine to Mac OS X 10.8 (Mountain Lion), see installation of Cougar (OS X 10.8) Guest as an operating system in VMware Fusion 5 (2033778)

  Try again with a 10.7 and see if it works?

  Concerning

  one

• Cannot add VMFS datastore to ESXi host

  Hi all

  I have a problem with the CF 1 logical unit number which can be seen as a device through several paths on all 10 hosts in a cluster, but it appear as a data store VMFS on 6 of the hosts. Other LUNS of the same Bay appear correctly on all hosts. 10 guests see the LUN with the same LUN ID and all hosts are identical regarding the version of ESXi (5.0 Update 2), HBA and firmware models.

  On the 4 hosts who can see the device but not the VMFS data store, it seems that he sees the LUN as a snapshot: 'list of snapshot storage vmfs esxcli' translates into:

  4f5e5cbb-a87cd2c6-86e9-d8d385f98034
  Volume name: LUN101_SAS2
  VMFS UUID: 4f5e5cbb-a87cd2c6-86e9-d8d385f98034
  Can mount: true
  Reason of mountability-United Nations:
  Can will: false
  Reason for non-resignaturability: the volume is actively used
  County of measure pending: 1

  The UUID VMFS above matches the UUID VMFS seen on 6 guests who can see the VMFS data store.

  When I try to use 'Add storage', the device appears with a lambel VMFS: LUN101_SAS2(head). I don't know why (head) was added to the label of VMFS. Oscreen n the following signature to keep 'existing' and "Assign a new signature" options are grayed out. The only option is "Disc Format. I need to keep the existing signature because it run virtual machines that have their files .vmx and hard on this LUN.

  Would the fact that I have virtual machines running on this LUN, I cannot choose the option to "keep the existing signature?

  I need to Storage vMotion these virtual machines to a different LUN before I add the VMFS datastore to 4 guests?

  TIA

  Hey RoscoT;

  Try the following command

  #esxcfg - volume - l

  This should show the volume

  To constantly increase the volume, use esxcfg-volume - M followed of the UUID or volume name

  Concerning

  one

• Assign a license to a host

  How do assign you a license to a host VMWare ESXi 5.0. This is a simple test server and I have a serial number. But I can't seem to find the place where to assign it.

  I'm so truck in the mode of assessment now.

  Of course, Miss something.

  BTW, it will give me notice and when I click on assign to host it takes me to the vwware page with no clear indication of how to proceed.

  The tab Configuration entry features under license, click on the link Edit and enter the key in there. Easy sleezy.