Cannot be saved on the drive

Similar Questions

• System Restore error: "the changes to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»

  I had some problems with my computer recently I knew could be solved with the system restore.  Then I went into system restore and went to a restore point that was a few weeks back.  After I clicked on it and pressing the ok button, the following message appeared: "the changes made to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»  I let it continue and do the restore.  My computer has rebooted and came up with an error in system restore that says restore failed.  It's the same thing with other restore points.  I don't know why I get this error because I not made any changes to this hard drive except for copy of a document word on him.  I thought that the System Restore monitors removable disks.  Anyone know what is happening here and how I can get the restoration of the system to operate without the mistakes to come?

  I have Norton.  Disable the Tamper Protection works.  I also noticed that since the G: drive was a portable hard drive, System Restore wanted to exercise oversight.  He wants to monitor all hard drives.  Turn on external and portable hard disks prevents tracking system restore changes to the readers.  I don't think anyone would have the system restore review external drives anyway.  It is not necessary.

• Cannot access files saved to the drive without formatting first on Windows 7

  I just reinstalled windows 7 on my computer, I saved all my files from before on a 2nd drive internal on my computer, now I can't access the drive without formatting it first, can you please help

  You can access the contents of the disc on another computer?

  If you can, do it and backs up your files then format the drive on the computer where you have reinstalled Windows 7.

• Satellite L500-19Z - cannot use WLan because the driver has been removed

  I accidentally uninstalled REALTEK WLAN driver and now I can't use the wireless installation.
  I tried to use system restore to recover before the uninstall, but the system restore won't restore (tells me that anti-virus prevents it probably, but I stopped my loading anti-virus, so this isn't the problem).

  I then allowed Windows 7 to find the material and it re-installed the driver, but I still can't use WLAN.
  Anyone got advice to help me get out of the mess I made for myself?

  Hello

  To my knowledge, this laptop supports the Realtek RTL8191SE WLan card 802.11bgn.
  You can find the Wlan driver here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  I think that it shouldn't be a big problem to get this working again ;)

  Good bye

• Cannot be saved in the Destination folder with the Batch command

  I am trying to save images for the web with a batch command.

  It seems that they are saved in the original folder used when creating the action.

  The destination folder, I chose in the command batch window is not written in.

  Is there a cure for this?

  Start your action recording and do all the steps you would if editing an image (in addition to open; open is done by the batch script). Thus, for example: resize your image; convert to profile (sRGB); Save as (using the short keys Ctrl + Alt + S (win) or Cmd + Opt + S (mac)); Close (Ctrl + W or Cmd + F). Save As has been used, economy will be like a copy. Well, which means that when you close it you will be asked whether to save the original - select 'no '. Now, you have completed the Action then finalize by stop recording. Every bit of this info will be published in the Action.

  Now give her another chance.

• Photo sent from Mac to PC - not as an attachment - part of the message cannot be saved in the Gallery

  Receive pictures from a MAC user in an email.  Impossible to copy, but cannot save in Windows Live Photo Gallery

  What happens if you save the picture in a folder on your hard drive...
  Open Windows Live Photo Gallery, and then add the folder...

  File / include a folder in the gallery...

• Cannot be saved on the network after update 11.0.10

  If I open an interactive pdf that is currently on a network drive and save as I get a message that says "the document could not be saved. Unable to save this file name. Please save the document under a different name or in a different folder. "I'm a domain administrator and have full access to this place is not a permissions problem. I can save other documents it and make changes to them without problem. Only Adobe Reader. If I go to another computer with Adobe Reader 11.0.9 and do the same steps that it works without problem. Anyone out there know if there is a fix for this yet?

  I use Windows 7 64-bit. This also works fine if I save on my local PC. Only happens when we go to a network location. I also test it on a PC that has 11.0.9 worked well, to give birth to 11.0.10 and have the same problem where it won't save to a network location.

  Try to disable the Safe_mode as a "Test."  If it works then it probably means you need to add the share on the server as a "place of trust.

• Photoshop CS5.1 suddenly cannot be saved on hard drive

  It's very strange.  In Photoshop I suddenly can't save files to the main hard drive on my mac mini.  I get the error "can not save as [filename] because the file is locked or you don't have the necessary access privileges." Use the "Get Info" command in the Finder to unlock the file or change the permissions on the files or folders inclusive. "However, I can save the files to the secondary hard drive.  Other applications may save on the main hard drive, very well.

  A test, in Photoshop, I tried saving it to the root of the two readers.  I get the error only when you try to save on the hard drive.  I checked the permissions on both players and they are the same: R/W system, wheel R/W and all R / w.

  I have tried everything I can find on the forums, but nothing works (repair disc, repair permissions, etc.).  I also reinstalled Photoshop and get the same error.

  any help much appreciated!

  Thank you

  JC

  The issue has resolved itself!

  I didn't reboot several times in my attempts to get the command-r to work (I have a PC keyboard and the 'option' and 'order' keys are reversed until that boots to OS X).

  Oh, another thing I did... I have connected as a user different and run Photoshop and was able to save a file on the hard drive.  Very strange because this guest user has less privilege than my normal connection.

  JC

• CAN OPEN & EDIT FILES, BUT CANNOT BE SAVED ON THE NETWORK PC (WIN7 - WINXP)

  Hello.

  1. I can open and edit a file in the main pc (Win7) pc (WinXP) another, but I couldn't save it. When I try to save an alert box pop up saying that the file I want to save is read-only.

  "" file.xls"is read-only. To save a copy, click OK, and give the workbook a new name in the dialog box save as. "

  How do I fix this so I can save it in the original location?

  --------

  2 - in the main pc (Win7). I try to create a new docs but it wont.

  "Cannot create the file 'New document texte.txt'. Access is denied. "

  --------

  3. not copy a file of pc (Win7) main pc (WinXP).

  "Source file: C:\xxx\User\My Documents\yyy.xls"
  Target file: Z:\xxx\yyy.xls
  The system cannot find the specified file. "

  Help, please.

  Note: WinXp pc is connected to the Win7 pc across a network.

  Hi Laurent,.

  Thanks for posting your question in the Microsoft community forum!

  I understand that you have a problem with the opening and editing of files on the network in Windows 7. I will try to help you with this.

  (1) did you make any changes before the show?

  (2) you are the administrator of the computers?

  (3) are protected files?

  Advanced sharing permission

  1. in Windows 7, right click on the shared folder and then click Properties.

  2. click on the sharing tab, click Advanced sharing. Check this file share.

  3. click on the permissions button, click Add.

  4. highlight the account that you want to share this folder to (name of account that will have access to the file), and then check the box allow for total control.

  5. If the name of the account is not listed, please click on the Add button. Type everyone, and then click OK.

  6. click on all members of the list of users and check the allow full control check box in the "Permissions for everyone" pane and click on apply, click OK.

  See the link below and follow the steps to set up a home network. You can set up a network between your two computers and share files between them.

  Share files:

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  "Access denied" or other errors in the access to or work with files and folders in Windows

  http://support.Microsoft.com/kb/2623670

  File sharing essential:

  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

  http://Windows.Microsoft.com/en-us/Windows7/share-files-using-the-public-folders

  Sharing of files and printers

  http://Windows.Microsoft.com/en-us/Windows7/help/sharing-files-and-printers-with-different-versions-of-Windows

  Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Windows cannot be installed on the drive needs the driver for device

  Transition from XP to Windows 7 Edition Home Premium. I'm following the instructions to upgrade to XP.

  Primary IDE Channel - how to find what device needs a driver and then go in and install it?

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the drivers card mother/chipset (F6 during installation of Windows 7), SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Cannot be saved because the disk is full. 144 GB of free

  When I try to record a 3 GB Tiff file in Photoshop, I get the following error...

  "Cannot save... because the disk is full."

  I have 144 GB of free space on the disk, I record and 280 GB of free disk to work.

  Try to save as a psb instead of a psd file. If I remember a psd file only supports up to 2GB.

  If the names of the formats don't make sense I apologize, chances are I will have a PET of brain.

• Cannot be saved in the store of dehydration

  Hi all
  We are facing errors of dehydration during the execution of the BPEL process. We have
  developed a composite including a mediator who call a BPEL process. This BPEL process interacts with the suite rules engine SOA and calls another compound that saves the information in a database. This composite works without any problem, but at the time wherever I have insert another invoke / asynchronous receive I get some errors dehydration. The composite that I call work accordingly, because in the composite console, I see that the status is completed, but the BPEL process somehow cannot continue to process (status on 'Running' States). In the diagnostic logs, I get the below error.
  
  I hope someone has an answer to my problem. Please note that I have already increased the bpel to 1200 transaction time-out.
  
  I am looking forward to hear from you.
  
  Here is the error that is coming

  Ajay,

  are you using any function DOXSLTRANSFORMFORDOC... I was getting the same error that you may receive, but after you apply the fix, my error has been resolved...

  Please give me your email address I will send you details of the patch... Contact support before you apply.thanks

  VG

• Cannot be saved because the interrupted process (?) photo

  I have some pictures I want to change the "tiff" to "jpg". As soon as I got to save on painting a message pops up saying could not be registered as had been interrupted. I started the process from scratch with the same photo but with the same result. I have not tried the other photos.

  The only other thing I did was to change the name of the photo in question before going to paint.

  Just a suggestion...

  Get another .tiff image, right-click on > open with > paint > file > Save As > Save As Type, click on the pointer to the right, select JPG > save

  PS why use paint? You don't have the Snipping Tool?

  t-4-2

• Windows 7 Media Player 12.0.7601: album art don't is not displayed even if the column is selected and album art is saved on the drive

  I just loaded all my music from my Windows XP system on my Windows 7 system.  Each album has album art that appears in "now playing".  But when I opened an album in library view and list titles, album art is not displayed even if she is among the columns selected to be shown.  All other columns appear and disappear depending on whether I choose them, but the album art is not.

  How to display album art?  Please don't tell me to switch to playback.  It is very unpleasant for me.  Even if the album art is displayed there, the space that is takes 2/3 of the screen to keep a small image of the cover of the album.  The list of receives securities only 1/3 remaining, so there is not enough space to display more than the name of the track, rating and length.  In addition, I don't want to see the sides, but they show that even though I have deselected this column.

  Windows 7 SP1 running Windows Media Player 12.0.7601.18741.

  HI - in the library WMP view did you check the setting on the box highlighted in yellow in the screenshot below? (Depending on which section you are in you need to 'extended tile' or 'icons')-R.

  

• Why my computer cannot download and install the driver for the SM Bus controller? And what is?

  My computer has detected a SM Bus controller and a couple of USB controllers, but they have not installed the drivers. When I try to do, the computer does not find. What should do the SM Bus controller and why now creates so many problems?

  Hello

  What is the brand and model of the computer?

  The "SM Bus controller (System Management)" part of the system chipset. The software for it is very important for the proper functioning of the system. SM Bus is used in personal computers and servers to low speed, system management communications.

  I suggest you to download and install the latest drivers for your Windows 7 computer from the manufacturer's website.

  Good day!