How automatic playback on my computer to work again?

Similar Questions

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• How can I get audio on my computer to work again

  How can I get audio on my computer to work again?

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

• I probed to "Always allow", "allow once" or "Block" for an incoming program. I accidentally click "block" and my program worked more! Please explain how I can allow the program to work again?

  I was probed to always select "allow", "allow once" or "Block" for an incoming program. I accidentally click "block" and my program worked more! Please explain how I can allow the program to work again?

  How can I reverse the error?
  Concerning
  JollyJ

  Without doubt blocked by any firewall you have installed, that being the review of the cases of your firewall settings that relate to this program

• How to get the software HP Coolsense works again after the clean install (win7)?

  I recently purchased a DV7 6014TX and upgraded to an SSD and a clean install of the retail version of windows 7 64-bit. I want to know how do HP Coolsense works again? I saved the folder drivers of my original hard drive SW and I so all people. SP52814, I downloaded the installer coolsense, but it doesn't seem to work. Any input on this would be highly appreciated.

  Coolsense also requires HP Support Assistant see links below

  HP Notebook PC - on CoolSense technology

  Download

  HP Support Assistant

• Recently moved to Costa Rica: How can I get my computer to work in English only.

  Sometimes when I ask questions on line, I'll take whole pages in Spanish.  I would lilke my Windows XP to surf the web in English only.   What should I do?  Thanks for any help you can be.

  Hi Moonstorm,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description its sounds like you are trying to change the language settings for the web browser.

  If you are using Internet Explorer, version of Internet Explorer you are using?

  I suggest you to read the following steps if you are using Internet Explorer:

  a. open Internet Explorer.

  b. click on tools and select Internet Options.

  c. in the general tab, select the languages option.

  d. Select the language.

  Reference:

  Change your Internet Explorer language settings: http://windows.microsoft.com/en-IN/windows-vista/Change-your-Internet-Explorer-language-settings
  Note: There is place for Windows Internet Explorer 7 and Windows Internet Explorer 8.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• How can I keep my computer die slowly again?

  I used in a hurry to get a new computer because it was all shiney and new and work quickly for a year or two before, he began to suffer from what whether computers suffer once they have served a bit. Nowadays it is not get excited because they are about as slow and problematic within a couple of weeks that the former was.

  I've learned a few tricks. Disk clean up does not seem to make a difference more, out of fragging is configured to run itself automatically so either does nothing or things would be even worse without him! I now use the Task Manager to stop programs from starting when I turn on the computer (except of course the security software) and this helps, but I still often have days when the computer is just not "motivation". It's particularly bad for me because I often just grab a spare room half an hour on that when I had the chance and half an hour can easily (and often) be wiped out while waiting for it to start correctly or having to sit through updates or another problem that I have no control.

  I tried to type a question into google to get advice, but all that happens is many offers to sell me a software that I probably is unnecessary and could even worse, especially if they are doubtful, and how would I know the good from the bad?

  If there is a software that would keep things working well then I would be willing to buy it, but feel a little cheated to when I have an operating system and security software that I feel between them should have to take care of things.

  Thanks for any advice,

  Tim

  Hello

  Software that claims to speed up your computer such as registry cleaners and system
  Optimizers are more likely to cause problems while fixing anything. Think like snake oil.

  ========================================================

  The real trick is configured correctly on the computer and do periodic system maintenance.

  Check with the support of the system Maker (manufacturer of motherboard for customized systems), their
  online resources and the drivers and ask questions in the forums about known problems.
  Updating the BIOS , drivers of low level chipset and embedded and separate major
  device drivers (anyone who can have an impact on the speed of startup and performance).

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the office and
  Splash screen.

  Check startup programs.

  Right-click in the left lower corner - Manager of tasks
  Or Windows key + X - Manager of tasks
  Or right click on the taskbar - task manager

  Check the Startup tab.

  More troubleshooting:

  How to perform a clean boot for a problem in Windows Vista, Windows 7,
  or Windows 8
  http://support.Microsoft.com/kb/929135

  Other programs to help:

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  -----------

  Especially what antivirus/antispyware/security program do you use? Windows 8
  comes with Windows Defender, which is a complete antivirus based on MSE in Windows 8.
  If using a 3rd party program uninstall it and run the removal of its creator tool to prevent
  remains. In most cases Windows Defender automatically recharges.

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

  Uninstallers (removal tools) for common antivirus software
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN146

  =======================================================

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Windows key + X (or right click in the lower left corner) - (Admin) command prompt

  C:\Windows\System32\ >

  At the prompt, type in SFC/scannow above
  (There is a space between C and /)

  How to run the command "SFC/scannow" at startup or in Windows 8
  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  -----

  Then run CheckDisk (chkfdsk/f/r)

  File (formerly Windows Explorer)

  Right click on drive C: - Properties - tab tools - error checking - Check

  Windows 8 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  =======================================================

  These should help:

  How to speed up your PC
  http://support.Microsoft.com/kb/2746761/en-us

  Ways to improve the performance of your PC
  http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performance

  Maintenance & performance
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V2H=win7tab1&V3H=winvistatab1

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  =======================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore. Be prepared to re - install the programs, applications will remain.
  And having redundant backups of your files on the disk main hard is always a
  good idea.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  How to create a recovery USB in Windows 8
  http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• What is a queue? And how do I get my printer to work again?

  After that Microsoft has removed a virus from my computer my printer stop working.  It indicates that the spooler does not work to reinstall the driver, I did and still nothing.  So I followed some other instructions tips "for help" on the printer, I found some indications on how to get into the queue, but my computer does not allow me to have without queue options, I need to change the queue.  Download this one.  Confused, yes I know.  So, any suggestions on this subject would be greatly appreciated since I seem to hit a roadblock.

  Follow these steps.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line (don't forget the quotes)

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on this site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• I had to do a restore of the system of my installation disc. My question is how do microsof office from t to work again? The files are in a backup file and will not start.

  My son was running from some strange programs and the keyboard and the mouse no longer works, while VISTA wouldn't start, but Ubuntu has worked well.  The desktop version of 7 on the computer was downloaded directly from Microsoft, so I do not have an original installation disk. The original is in a file called "old windows".

  Hello

  You can retrieve only the data from the windows.old folder files, not programs

  programs need to be reinstalled again from the original media

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

• HOW CAN I MAKE MY COMPUTER BURN CDS AGAIN?

  I TRIED TO BURN CD, BUT FOR SOME REASON ANY, WHENEVER I HAVE IT TRY STARTS TO BURN, BUT THEN I GET AN X NEXT TO ALL THE SONGS AND THE ERROR MESSAGE ME SAID TO TRY TO CLEAN THE CD USING A NEW ONE OR DO BURN AT A LOWER SPEED AND I ALREADY DID ALL THAT BUT IT STILL THE SAME OR SOMETIMES WINDOWS MEDIA PLAYER STOPS ON ITS OWN OR IT ME SAID CONNECT A BURNER AND RESTART THE PLAYER... WHAT SHOULD I DO?

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Used speed, the actual brand of discs, burning and if file Live or mastered all come into
  play. A cleaning disc can sometimes help.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Can you tell me what is the line that I need to put down for my computer started working again please black screen?

  I have an older version of windows on the computer that I use for my children childcare at home. This is Windows 95. Since yesterday, it does allow me to go beyond the black screen. It tells me to insert the startup disk in drive A. After it is inserted, it then goes to a command prompt: (A :\>) I typed in win95, startup, load, sys/win95, and nothing works.)

  Thank you for visiting the Microsoft answers community site. Unfortunately, we provide only support for Windows 7, Vista and XP. The question you have posted is related to Windows 95 and would be better suited to Windows 95 Discussion groups. Please visit the link below to find a community that will support what ask you
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Win95.Setup&cat=en_us_a1973c9a-BD7A-4F01-9304-8fe3a4858fb9&lang=en&CR=us C Cody
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get my Dell Dock works again?

  How can I restore Dell Dock - it suddenly stopped working for no apparent reason.

  Hello

  Click Start > programs > Dell software listed there > find the Dell Dock.

  Try a system restore to before the problem;

  http://bertk.MVPs.org/html/restoresysv.html

  Or re-download it:

  http://www.DellDock.com/

  You can ask Dell Support Forums, too:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• How can I get my contacts apps working again?

  The Contacts app on iPad keeps crashing. Already tried the reset complete (power off), no change.

  The Contacts app on iPhone (same IoS Version works fine with the same contacts).

  What can I do to get this working?

  Settings - iCloud - uncheck contacts

  Say 'Yes' to the warning that your iCloud contacts will be deleted

  Then force restart the iPad

  Settings - iCloud - re check the contacts

• How the railways vi within the exe works again?

  I thought I had this figured out, but now I'm not sure.  So I a vi (lets call it MyVI.vi) in my project I have call dynamically so I need to know his way.  The vi is C:\Projects\ProjectName\MyVisSubfolder\MyVI.vi in the development environment.  When I build an exe, the vi path is: C:\MYEXE\MyVisSubfolder\MyVI.vi It's logical that I get that screws are in the same folder they are in development, but the path now includes the executable.

  Know well I decided to change my a bit development environment folder structure (no particular reason), and my vi is now located at C:\Projects\ProjectName\DEVELOPMENT\MyVisSubfolder\MyVI.vi.  Basically, I just moved all my files one folder down.  Know my project is broken because LabVIEW points the way to my vi is now: C:\MYEXE\Projects\ProjectName\DEVELOPMENT\MyVisSubfolder\MyVI.vi

  Why is it now, including all records above the vi?  My project is located in the folder 'DEVELOPMENT' and previously in the folder "ProjecName".  Previously, he did not understand he just "ProjectName" folder subfolder where the vi, why is it different now?  Has anyone experience this problem?

  The EXE will duplicate as much of the structure of folders as necessary to get to the point where all of the contained files share a common path. This can also be described as enough of the path to allow work-related paths (in other words, if your done VI reference as a file to...-.. \Another_Folder\subVI.VI, the exe will include at least two levels above the current vi so that the...------..------path is valid). Sounds like when you moved your folder of development, you have continued to make reference to some screws that has not moved, and now in order to preserve the structure of relative path the EXE to include much of the way.

• How can I get my email to work again after that the recent Windows Update has been installed?

  I am running Windows XP and yesterday it has downloaded an automatic update, it turned off and today I can't in Outlook Express for some reason, any help will be appreciated?

  Hi TaylorBurns,
   
  -What happens when you try to start Outlook Express?
  -You receive an error message or error code? If so, specify the same?
  -Do you remember the number of the Knowledge Base (KB) update that has been installed recently?
   
  See the update history for the same. Follow these steps to do the same thing:

  i. Click Start, click Control Panel and then double-click Add / Remove programs.

  II. open Add / Remove programs.

  III. at the top right, select the box show updates to date. All installed updates appear at the top of your list of programs.

  Check the event viewer if there is no error message related to this topic.
  See the following links for the same:
  Using the event viewer

  Procedure to view and manage event logs in Event Viewer in Windows XP