Cannot capture video. Win7-64 bit

Similar Questions

• Satellite X 200 PSPBUA cannot capture video using the firewire port

  Satellite X 200 PSPBUA 00N007

  I try to capture dv video from a camera via a capture software but is not working/errors generated.

  Tried Pinnacle and free software that do not work. Texas Instruments 1394 OHCI driver exists and works OK.
  Satellite X 200 PSPBUA 00N007 upgraded to Windows 7 64 bit.

  Any suggestions appreciated

  > I'm trying to capture video from a camera via dv capture software but is not working/errors generated.
  What happens exactly? This error message do you have?

• Cannot capture video from the band using CS5

  Just came across a strange problem. Trying to capture a tape DV in a Sony DSR - 11. First CS5 says the tape is in offline mode - I see no video in the capture window and no code of time, although the belt buttons doesn't work. I restarted the computer (Windows 7 platform), powered by the bridge and the and

  disconnected/reconnected the FireWire cable without result.

  I opened my old version 7 of Premiere Pro and capture it works fine. If something is obviously hinky with CS5. Anyone experience this capture

  problem with first CS5? Any ideas for patches?

  Thank you, Steve

  It will have 5 seconds to check capture settings. This is exactly what happens when the Capture parameter format does not match the output. It is also possible to control the device control the bridge, even when output parameters are wrong. There is no interest in doing something else without checking the settiings first.

  I still want to know if this in fact Windows dialog box when the bridge was connected.

• Satellite P305-S8997E: cannot switch to Win7 64 bit - error: your system is not there to upgrade

  Hello world.

  I have the Toshiba disk for Windows 7 Home Premium Upgrade, as I'm currently running Vista Home Premium 64 - bit.

  I do not choose the path of upgrading with the upgrade wizard Toshiba 64 bit version.
  However, I am stunned with the Toshiba Upgrade Wizard dialog box, saying: "your system is not applicable to the upgrade. You can see http://www.csdsupport.toshiba.com/tais/csd/support/windows7upgrade/ information Windows 7 upgrade"after he checks the first 4 criteria as being correct.

  Any help would be appreciated.

  I did buy my notebook of the USA, but live in Australia. However, I was able to order the disk to upgrade Windows 7 from Australia when I arranged for my laptop model to add to the eligible improvements on the website.

  For more information, I was able to get my hands on a disc of Windows 7 Ultimate 64-bit full version. On this basis, I chose Windows 7 Edition Home Premium than the version I bought.
  I have used my product key from my Windows 7 Home Premium Upgrade disc and chose the upgrade version.

  There are 3 the memory usage possibilities that are incompatible with Windows 7 so I uninstalled them and used the Toshiba Windows 7 driver updates to install what I could. Everything works fine and update MS naturally recognizes the genuine key.

  However, it defeated the purpose of why I can't upgrade from upgrade disc.

  Thank you.

  Hello

  Did you use the preinstalled Toshiba Vista OS until you used the Windows 7 upgrade disk?

  How about a new installation? This should be possible as well Win 7 Toshiba drivers can be downloaded from the Toshiba driver page we

  Welcome them

• Cannot run Microsoft Combat Flight Sim3 on Win7 64 bit.

  I am trying to run Microsoft Combat Flight Sim3 on Win7 64 bit. The program is installed, as well as the updates ACUpdate.exe and CFS3UpdateEng.exe, but when I click on the icon, I get, "the program cannot start because it could not find common.dll on the computer."

  I am trying to run Microsoft Combat Flight Sim3 on Win7 64 bit. The program is installed, as well as the updates ACUpdate.exe and CFS3UpdateEng.exe, but when I click on the icon, I get, "the program cannot start because it could not find common.dll on the computer."

  I found the solution on http://www.compilots.com/downloads/details.php?image_id=257. Download crack. Go to the default folder for MCFS3 under Program Files (x 86) /Microsoft Games / MCFS3 and move the file MCFS3.exe to a save location. Unzip the crack in the MCFS3 folder on drive C, right-click on the new .exe file and choose send to desktop as shortcut. You are in! Make sure that you have saved the original .exe file somewhere safe, it does not work for some.

• Compaq CQ58 - 299EV model of updated video card and driver for win7 64 bit and ram upgrade

  Hello

  Since I was my compaq laptop (about a year), it was windows 7 64 bit operating system inside, even if the manual was for windows 8. So, when I looked up initially for up-to-date drivers I couldn't find support for win8, but I chose not to because I saw tons of compatibility issues with this model of laptop. Well I don't want to update soon, so I would like to know what are the latest drivers I can find for my model for win7 64-bit.

  So, what model of video card has it built in (it just says: "Intel(r) HD Graphics"), so I can find the right drivers for it?
  Also can I put my ram? There are now 2 GB.

  Thanks in advance.

  Since it is a Celeron processor it comes:

  Intel HD Graphics (on models with Intel Pentium or Celeron processor; supports DirectX 10)

  They don't give him a number. The processor is based on the Sandy Bridge architecture, so any driver for the video card HD 3000 series will work.

  Latest version of the Intel driver

  This can take up to 8 GB (2 x 4 GB) DDR3-1333 SO-DIMM, like this:

  http://www.Amazon.com/Samsung-PC3-10600-1333MHz-so-DIMM-upgrade/DP/B003XN3BZC/ref=sr_1_1?ie=UTF8&QID=1413330996&SR=8-1&keywords=DDR3-1333+so-DIMM

  Here is the Manual:

  Manual

  See page 45 for the upgrade procedure.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Pavilion G6-2260sh card reader and video driver for win7 64 bit

  Hi people!

  I need drivers for HP Pavilion G6-2260sh video and card reader driver for win7 64 bit

  Can someone help me?

  An error message appeared so I tried the above utility to describe what driver I need.

  Semms that it's the final solution: 13-4_mobility_vista_win7_win8_64_dd_ccc_whql

  Now really perfect thanks!

• New dv7t Win7 64-bit cannot access other than XP

  Hi all

  My new dv7t notebook Win7 64-bit cannot see a XP PC on my home network. This is strange, exasperating er, is that he could yesterday. In short, what worked yesterday does not work today.

  * XP - Computer Office SP3 is connected to Linksys WRT54G v8 (latest firmware)
  * Office XP shared a connection USB Canon i960 printer
  * Computer laptop Win7 is wireless connected to the WRT54G
  * Internet connection is fantastic.

  Yesterday, I added the canon printer to the laptop Win7 using the trick of local port: Port Local = \\winxp1\canoni960. It worked great; documents and test printed pages. Yesterday, I could see the shared printer on the XP.

  In addition, Office XP has appeared in my Win7 network. Yesterday, I could see her and you connect to it, for example, Start-> Run-> \\winxp1 worked.

  Today, nothing. It does not - and I spent most of the last 15 hours trying to make it work.

  On laptop Win7...

  * passes the 'Home' network 'work '.
  * changed the workgroup on Win7 to match XP: both are now member of the Working Group "MSHOME".
  * the portable Win7 removed from the "homegroup".
  * WiFi dropped and re-created
  * tinkered with different combinations of parameters in 'Advanced sharing settings.
  * ' net view' raise an error "system error 6118 has occurred. The list of servers of this working group is not available. "Bad news: Win7 system can even see itself.

  I tried hundreds of others suggestions collected on the Windows 7 forum. None worked.

  I'm puzzled. I don't know what to try next, other than to return the thing to the original image.

  If you know or suspect that happens and how to solve this problem, I will be highly grateful.

  Thank you.
  Paul

  It was an update of Norton Internet security that got killed.

  He fixed it.

  https://Sonos.custhelp.com/cgi-bin/Sonos.cfg/php/enduser/std_adp.php?p_faqid=407

• Satellite A300 - 1MX Win7: can't capture video from conencted Camcorder FireWire

  Hello

  I have a problem with the video capture from a Sony TRV60E with a Satellite A300 1MX and Windows 7 camcorder via the firewire connector.

  The camera is not recognized (or more) Windows.

  I already changed the firewire driver under windows to the "legacy", also often described in other forums.
  And for a few hours, everything worked fine. The camera has been recognized and Pinnacle Studio 14 could capture video of him.

  But after eight hours, the camera was suddenly is no longer recognized.

  -l' camera is immediately recognized by a XP system
  -On the system W7, I uninstalled, reinstalled the driver firewire, powered down the material (shot of power and the batteries for several minutes), but nothing helped.

  I may have a different firewire driver? Or another operating system?

  Thank you.
  kJ

  It is not easy to say what the problem is here.
  For confuses me the fact that cam has BEEN recognized in the past and now for some reason any it is not recognized correctly.

  All devices are properly recognized in device (firewire port) Manager?
  You can test the firewire port using another device?

  You have discovered what may be the problem. Test port firewire with other devices to see if other devices will be recognized correctly.

• Cannot install driver for printer HP LJ M1120n MFP HP 6570b laptop with win7 64 bit

  Installation driver Plug & Play doesn't work - it can not find the proper drivers.

  If I try to install the latest HP driver for win7 64 bit (from the HP site), it stops during the instalation (windows program stops due to unknown issues).

  If I try to install the 32-bit version of the driver complete Solution from HP site, it let me to the HP install window. By clicking on the "Install" button, it stops saying "Setup is not supported on this operating system, or the system does not meet the minimum requirements...". »

  printer: HP LJ M1120n MFP

  laptop: HP 6570b

  OS: windows 7 64-bit, selected, automatic driver update drivers on board cooler

  What to do next?

  I found no error in the event viewer, at least not a red icon.

  But I find the solution - in another forum thread. Here.

  1. I have connected the printer to get the error message,

  2. then downloaded and UNPACKED (no) LJM1120-COMPLETE-Solution driver installed (32-bit) here.

  3 went to Device Manager, find the printer,

  4. right click to get the link submenu "Update driver."

  5 choose the unzipped directory driver and let it update driver from there.

  Printer solved.

  Then did the same thing to scan, points 3 to 5.

• Cannot find or open a folder for my captured videos, but they are there (WS-VR203P)

  I have a nice video capture unit that I managed to capture video.  (I bought from Monoprice.com (http://www.monoprice.com/products/product.asp?c_id=108&cp_id=10810&cs_id=1081003&p_id=5616&seq=1&format=2) and it seems that other sites sell as the WS-VR203P)

  The problem: the folder that it records videos in (C:\Program Files x86\EZ Grabber\MyVideos) is not visible in the Solution Explorer, even with "show files and folders" enabled.  The only way to see it is through the interface of the software video capture card, and even in this case the parent folder, it shows the folder my videos with a top lock.

  I need to access these records to import videos captured in Windows Live Movie maker or Adobe Premiere Pro, etc, but no program can see that folder.

  Any help would be much appreciated.

  Thank you
  Mike

  Windows 7 does not allow for programs to save data in the x 86 Program Files or Program Files folders.  Your program is apparently not properly designed for Windows 7.  For backward compatibility purposes, it redirects these data in a 'virtual' folder in your user profile.  This can be very confusing when look you.

  See the following for details and where you will find files.

  For more information, see:

  'See the compatibility of files' of Vista and the delicious wonder who is leading Virtualization
  http://www.hanselman.com/blog/VistasShowCompatibilityFilesAndTheScrumptiousWonderThatIsFileVirtualization.aspx

  Common file and registry virtualization in Windows Vista or in Windows 7 problems
  http://support.Microsoft.com/kb/927387

• Cannot install the Epson CX4800 printer driver in the new Win7 64-bit system.

  I have a new pc with Win7 64 bit. I downloaded the driver Vista/Win7 64-bit on the Epson site. The Installer-error at the point when you try to install the driver. I checked Device Manager and can see Printing USB support in the USB controllers section. When you view Device Manager, I can unplug the printer USB cable and USB printing support icon goes. When I plug the cable into the printer, the reapperars icon. I can scan documents from the printer to the computer. I can also copy the parts of the printer on the paper. I can't get the driver to install. Windows simply says "driver not installed device software." I run the driver installation program Epson 4 times with no success. Your help is appreciated.

  Hi halbad,

  Please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/f1d234f2-d14c-4b0a-A2ac-53fb72fb5357

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot install Win7 64 bit only Win7 32 bit

  Hi I'm new on this and don't know if this is the place to ask questions so here I.

  I'm trying to install Win7 64-bit using my HP dv7 laptop has Win7 64 bit on it, who can't seem to install only win7 32 bit

  How to install Win7 64 bit

  also how can I increase the size of my C drive of 20 GB for a larger size

  I am usiing Vmware Workstation
  Worm 6.5.3 build 185404

  André Pett wrote: resize the virtual disk is possible within the parameters of the virtual machine HARD drive

  The OP is using VMware Workstation 6.5.3, and there is no option in the user interface in the virtual machine settings to increase the size of the hard drive in this version and must be done from the command line using vmware-vdiskmanager.

  and the type of disc is not the IDE.

  Not sure why you would say that as an IDE hard can be extended with a vmware-vdiskmanager or virtual machine settings as appropriate in future versions of VMware Workstation.  I did several times that I can remember.

• Capture video from a Canon MVXS350i DV PE11 camera.with.

  Hello

  What video capture program PE11 seems to identify my camers as a camera MicrosoftDV and VC and I get a message saying "your current settings of the camera is different from your project results settings cannot be optimized.

  However, I can capture video and it seems OK.

  How do I check and optimize the targeted parameters and what are they?

  I use a firewire card.

  I'm running Win7 64 bit.

  The camera is six years old and I can not find if there are new software for PC.

  Thank you.

  Hi Bill and Steve,

  I had not been within the parameters of the new project, I've now done and made the relevant changes. The settings were for the HD as suggested and also NTSC (I am in PAL-land). I'm pretty confident, that this will do the trick.

  The camera is a Canon MVX350i Mini Ribbon.  (looks like an extra ' had there on the title of my discussion) connection via firewire.

  It is midnight here now, so I think I'll try a new project of tomorrow.

  Thanks much for the advice.

• How do I fix/remove registry errors and redundency in win7 64 bit

  I need assistance with directions to help me eliminate some errors of registry and redundencys and also some unnecessary files and some ghost and unnecessary services on my win7 64 bit computer.can lenovo someone help me thanks

  Hello

  If you pay attention to the registry cleaners or the system too much hype
  Optimizers don't. Think of those as oil of snake that are more likely to
  cause problems while fixing anything. If you are not likely to have the registry
  Mistakes and certainly not ghost services.

  If you experience problems with system performance using this utility
  below and ask questions in these forums on specific issues.

  ----------------------------------------------------------------------------------------------------

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
  Professional, comprehensive and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">