Cannot change the language of the user interface with "general.useragent.locale" as auto update 18 Nov

Similar Questions

• change the user interface presentation based on the size of the Panel

  I'm looking for a way to adjust the layout of my user interface based on the size of the group. For example, two buttons that are top of the other until the height of the window is small enough that they need to be next to each other instead.

  Another example would be a series of buttons that appear as a line if the Panel is wider than high, or in a column if it is higher than it is wide.

  -What someone does something like that, or know if it is possible? As I see it, all I need is a way to read the current size of the Committee and I can put a function in onResize/onResizing that allows to adjust the layout of the user interface.

  Figured it out!

  This change my row of buttons in a column of line based on the report of the window. Finally understood windowBounds.height and windowBounds.width.

  myPanel.onResizing = myPanel.onResize = function () {
    if (myPanel.windowBounds.height > myPanel.windowBounds.width){
         myPanel.grp.cmds.orientation = "column";
    } else {
         myPanel.grp.cmds.orientation = "row";
    }
    this.layout.resize();
  }
  

• Error variables look a tab after race change the user interface

  Hello

  I have a problem which seems to be a bit like this:

  http://forums.NI.com/T5/NI-TestStand/error-viewing-variables-tab-in-runtime-operator-interface/m-p/1...

  The VI I'm running is a step of edit of a type of step. LabVIEW checks if the property 'Step.Setup.ReadMeasName' exists, fills a listbox with her if she does. An another ListBox with all available measure names will also appear on the user interface. The user has an Add and Remove button to remove the 'ReadMeas' list box measures or add them to it of the listbox 'MeasNames '. Several names may be added/removed according to what is selected when you press the buttons. Once 'Fact' is clicked the VI writes the 'Ref' to the list box "ReadMeas" property to "Step.Setup.ReadMeasName", using a node to set the value of property that is passed the TestStand sequence context. If the property does not exist it creates.

  The only time where I have any problem is when I try to remove items from the property, after it is already initialized (i.e. non-empty). In other words, if I run the VI of teststand, put several names as in "ReadMeas" click on done, again run the VI (already added names appear in the box when the user interface is displayed, LabVIEW reads "Step.Setup.ReadMeasName"), then remove the names. IF "ThisContext.Step.Setup.ReadMeasNames" has opened in the tab 'Variables' step when you try to remove the names, I got this message in the Variables tab: 'one or more errors occurred. Please save your work and restart the application. "If I'm careful of not having expaded 'ThisContext' in the variables tab, but check the property before and after the removal of names in the list it does not work properly, and there is no error.

  This isn't a big problem because I doubt that the end user will check to see that the property has actually filled, but I still want to fix the bug if possible. I installed the patch for TestStand 2010 and the .net Framework 4.0. Someone has an idea of what might be happening here?

  Thank you

  -Josh

  Josh-

  Looks like you are running in a known issue 193751, which is documented in TestStand 2010 and 2010 SP1 known issues list. It is a problem that we intend to fix in a future version of TestStand.

  I hope this helps and I'm sorry for any inconvenience this issue may cause you.

• Slow response from the user interface with acquisition of data of type long time

  Hi all

  I have a question to ask more out of curiosity than necessity right now. I've built a program that acquires data from the accelerometer and the Treaty in a number of ways: filtering, FFT, FRFS, things like that, but the answer of the UI is still slow, because I need a resolution of frequency of 0.2 Hz for my data domain, which means that the sample acquisition time is 5s and all this awaits before execution.

  My question is this: is there a way to completely isolate the user interface of data acquisition so that it responds immediately?

  I tried a design model of producer consumer with queues, but found everything to be always waiting for samples to be taken. Maybe it was exactly as I did.

  Thank you

  Phil

  If you need to sample for 5 seconds in order to have enough data to analyze, so unless you can "predict the future" and "knowing" the five seconds of data, simply wait for the data that arrives.  Using parallel loops of producer-consumer will allow data acquisition to proceed (for the next 5 seconds of data) while you do the analysis, but you still have to wait for the data to be analyzed.

  Note that the previous paragraph assumes you are collecting data in 5 seconds 'chunks' and analyze each "chunk" (independent) on arrival.  You could also do something like having a "second 5 sliding window" which moves, say, a second at a time, giving your FFT a finer resolution of 'time' (at the expense of their independence).  This would be a (slight) change in your loop of producer (you want to taste in 1 second pieces, accumulate 5 these pieces) and the consumption loop (start analyzing, spewing a FFT every second, while replacing the older "chunk" with the most recent - a queue with loss can do for you).

  Bob Schor

• Try to update the user interface with another thread

  Hello
  
  Start a class JavaFX from another application, and then I want to change the UI of it components. I tried to use Platform.runLater to do.
  
  But the GUI crashes at the start (does not display anything) for the first 5 seconds (sleep time) changes and shows.
  
  I want to display the GUI at first, and then after 5 seconds the GUI should be updated with the message, but with the code it hangs just first and screens below everything after 5 seconds.
  
  Here sampleGUI is a an application javafx with inside text fields.
  
  + / public class StartGame extends Application {+
  +@Override+
  + public void start (steps) riser Exception {+
  final sampleGUI gui = new sampeGUI();
  GUI. Start (training);
  
  + Platform.runLater (new Runnable() {+)
  +@Override+
  + public void run() {+
  + try {+
  System.out.println ("sleep now...");
  Thread.Sleep (5000);
  System.out.println ("sleep above!");
  gui.updateText ("new message");
  +} catch (InterruptedException ex) {+
  System.out.println ("exception" ex); +
  +}+
  +}+
  +});+
  +}+
  +}+

  Platform.runLater(new Runnable() {
    @Override
    public void run() {
     // ...
    }
  });
  

  causes the run method of the executable to run on the Thread of the FX Application. Since you put Thread.sleep (5000) inside the run method of your executable, sleep occurs on the Thread of the FX Application.

  The call to runLater (...) can be called from any thread, including the Thread of Application FX.

  So, if you are not in the FX Application thread, you want to:

  // any long-running task, for example
  System.out.println("Sleeping now");
  Thread.sleep(5000);
  System.out.println("Sleep over");
  Platform.runLater(new Runnable() {
    @Override
    public void run() {
      // update UI:
      gui.updateText("New Message");
    }
  });
  

  If you are on the thread of the Application of FX, which is the case in your Application.start (...) method, you must create a new thread to run your code of long duration. You can do this "manually", creating a Thread and a workable for it to run, but it is probably best to use the simultaneity of JavaFX API, which has many hooks useful for updating the user interface on the Thread of the FX Application.

  In this case, the code would look like this:

  public class StartGame extends Application {
    @Override
    public void start(Stage stage) throws Exception {
      final SampleGUI gui = new SampleGUI();
      gui.start();
      final Task waitingTask = new Task() {
        @Override
        public String call() throws Exception {
          System.out.println("Sleeping");
          Thread.sleep(5000);
          System.out.println("Sleep over!");
          return "New Message" ;
        }
      };
  
      waitingTask.setOnSucceeded(new EventHandler() {
        @Override
        public void handle(WorkerStateEvent event) {
          gui.updateMessage(waitingTask.getValue());
        }
      });
  
      ExecutorService executor = Executors.newSingleThreadExecutor();
      executor.submit(waitingTask);
    }
  }
  

  There are (probably of dozens of) other ways to use a task to do. See the API documentation [url http://docs.oracle.com/javafx/2/api/javafx/concurrent/Task.html] for the task for more information.

• How to use the Shell of the user interface with multiple applications (ear)

  I use 11.1.1.6 JDeveloper.

  I want to modularize the functionality in applications (ears) and use the Shell of the user interface as a navigation mechanism between applications and single entry.

  Is this good?

  What is the use of Shell of the user interface best practices.

  What about security (2 AA)? Security of the ADF?

  Thank you

  Hi user,

  You can use the shared library ADF function if you would like more information

  http://andrejusb.blogspot.AE/2010/07/deploying-ADF-applications-as-shared.html

  use the adf security

• Cannot change the ASPX page with Webdav connection

  I can't change the ASPX pages with webdav on my IIS6/win03 server connection. I connect to the site very much, but when I press the edit button I get an error message stating 'cannot lock the page for editing at the moment. Try again later. "I can edit pages html very well. I can edit ASPX pages if my connection is set to network and I am on a network share. I have even another server where I can connect with webdav and editing ASPX pages.
  
  Looks like a configuration problem on this particular server, but I have no idea what it is, and I can't find answers. Anyone had this problem before? How did you solve this problem?
  
  I tried to delete the LCK and defining files and the files from scratch, no luck.
  
  THX

  OK, I thought about it. If you run 2 sites in IIS, you must take pages aspx on extensions to the application. Go to the properties on the site that you have the connection to via Webdav and click the configuration button. Remove the entry for the aspx extension.

  I guess this is the answer for people having problems with other pages such as php and asp, server-side

• How to change the user interface of the entity object indicators / Validation msg when running?

  Hello

  I use JDeveloper with version 11.1.1.6.3. Given my requirment details below.

  Suppose I have a (say 'EMPLOYEE_RATING') table in DB with the following structure.

  Columns:

  1 EmployeeId (Employee Id)

  2 RatingType (values can be in Stock or Bonus)

  3 RatingLevel (values can be 1, 2, and 3)

  Constraint:

  EmployeeId, RatingType and RatingLevel all together must be unique.

  Requirement:

  The customer's requirement is to have two screens of rating (one for Bonus another stock) and display different user interface boards and validations as follows.

  1 RatingType is a hidden field, are defined with the default (Bonus or Stock) based on the screen that the user opens.

  1. for the Stock screen, RatingLevel label should be "Stock note.

  2. for the Bonus screen, the label should be 'Bonus Rating'.

  3. for validation, the message must be 'Bonus note level must be unique' or 'Level of Stock of notes must be unique' ADB on the user screen opens.

  Implementation:

  I have a def EO (for example "RatingEO") and VO (for example ' RatingVO') def. Tips UI (Label) are given at the level of the OS. Also the unique constraint validation is made to EO with the message ' {0} and {1} must be unique, where {0} is source.hints.EmployeeId.label "and {1} is source.hints.RatingLevel.label.  I also did the shuttle two different instances of the VO (EmployeeRatingBonusVO and EmployeeRatingStockVO) in the request form (although BonusTaskFlow and StockTaskFlow are set to open with the new transaction, Intension of the two shuttle different named instances is to have the common code in VO. impl class but can run different business logic code by checking the name of the instance of VO)

  Question:

  Since I have two different pages, I can define two different labels in the jsff, but I can't change the commit message defined at the level of object entity based on open display. At the opening of the screen, depending on the type of screen, I should be able to change the label specified at the level of the entity object. (It should not affect the definition but only the instance). As this entity object cannot be distinguished (if it belongs to Bonus or Stock), I have problem on how to change the indicators of UI during execution.

  Any help on this would be appreciated! Thank you.

  Rami

  Post edited by: rami

  I tried your script.

  I created the secondary key with EmployId and rating level. I added validation of Unique key. In failure handling handling section of the validator, I gave the error message like: {0} must be unique. For token 0: I gave RatingType (here RatingType is the name of the attribute in OT).

  We give the default for RatingType as Stock Bonus in VO. kind RatingType get its value or Stock Bonus based on the original Version that we use.

  I hope this helps.

• Still can not log in to windows XP, cannot change the user name, or start in what either.

  locked out of windows xp.  happens only with the window prompted for a user name and password.  the user name is the name of the previous owner and does not know the password.  It is as far as the computer goes.  It's not my computer (thank God), but I need to know what to do to help the girl he has.  The computer was rebuilt and bought by it.  It's a computer dell laptop.

  What I can do.  I can't connect what either.  I can't edit or create a new user name and password for it either.  I can't get in any other mode.  You have any suggestions?

  Hello

  Microsoft cannot help you to reset, change or delete passwords. For more information, see the article mentioned below.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/default.aspx/KB/189126

• Flash-CC - how to change the user interface of light?

  Hey, resonably new Flash, used previous versions. I'm not really fond of the new dark UI, how can you change to the slight user interface?

  Thank you!

  Hello

  You can change the UI setting general preferences

  Windows: Edit > Preferences... and choose light in the dropdown UI category General antipodes

  Mac: Flash > Preferences... and choose light in the dropdown UI category General antipodes

  Thank you!

  Mohan

• Cannot change the user name of the forum

  If you go to the user control panel, under the profile box, there is a place where we can make our forum user name - which would be nice because this stuff USER-xyz is ridiculous.

  Unfortunately, it does not work because you must put a valid e-mail address in order to change your user name... but you can't because it lacks the text box that you are supposed to type in the e-mail address field.

  Can a mod contact someone who can take a look at this?

  I too have this problem. I really wish that Sony would like to address this forum some to make it easier to use.

• Windows 7 Home Premium - cannot change the user name in the authentication dialog box

  I was hoping someone might be able to answer a question on how to get a computer running Windows 7 Home Premium to display both the username and password fields when attempting to authenticate on another Windows computer.

  Here's the situation: allow us that the leaders and other members of the staff allowed our Organization to establish a VPN connection to our corporate network (via Fortinet Forticlient, for what it's worth.)  Once the VPN connection is established, on the remote computer, the user must be able to access the UNC path to our file (\\servername\share) server.

  Because the remote user has not yet authenticated on the domain Active Directory of business, a dialog box should appear to the user input a user name and password.  Enter the user name (domain\username) and password and share should open, and the user must then be able to access the files in the share.

  I (and several other members of the staff) have been using this method successfully to access files via the VPN connection, and it works very well.  However, it does not work whenever the President of the company will connect to the VPN from his computer at home.

  Whenever the President connects the VPN and attempts to access the UNC path, he reports that the dialog box which appears on his computer at home has only one field for a password; the user name field appears to be on his local user account, and it doesn't have the ability to change.  (I have him asked if there is an option 'use authentication information', and he declares that there is not just a dialog box with a single field, the field of password.)

  The President is running Windows 7 Home Premium on his computer at home, so I thought that the problem could be because he was running this edition of Windows.  However, I have installed VPN client and test the connection on the server share file using the computer of my wife, who is also running Windows 7 Home Premium, and I received the two fields as expected authentication dialog box and has been able to authenticate to the domain successfully and open files from the share with no problems.

  Does anyone have recommendations on what I can try to allow the President to authenticate successfully to our server share?  I am confused, and it is eager to be able to get remote access to files on his home computer.

  Hello

  Please contact Microsoft Community.

  I suggest you to ask your question in the Technet Forums, where we are the support technicians who are well equipped with the knowledge on these issues. Please visit the following link to go to them and post your query there:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Have a great day.

• change the user interface fonts through the world

  I would like to change the font for my application, I have the method
  

        public static void setUIFont (javax.swing.plaf.FontUIResource f){
            java.util.Enumeration keys = UIManager.getDefaults().keys();
            while (keys.hasMoreElements()) {
                 Object key = keys.nextElement();
                 Object value = UIManager.get (key);
                 if (value instanceof javax.swing.plaf.FontUIResource)
                      UIManager.put (key, f);
            }
       }

  and it has worked well so far, but we must dynamically update (when the user presses a button or something) and the code above it changes only for components, so call at the beginning of the app is very well, but if you call it later so only new components have new police...
  
  I was wondering if there is any way to 'force' components to refresh their policies? Alternatively is there annother way to change all the fonts?
  
  Thank you

  It is one of the rare occasions when calling updateUI is the right thing to do :-)

  forEach toplevelFrame:
      SwingUtilities.updateComponentTreeUI(topLevelFrame);
  

  CU
  Jeanette

• Cannot reset the user vmail with Cisco Unified CM Administration password

  We use Cisco Unified CM Administration ver 7.1 with Cisco 7945 IP phones. I have a user who came to tell me that they could access is no longer the voicemail, getting PIN disabled. Ichanged the PIN with the Cisco Unified CM Administration that accepts the new pin without problem, but when we try from the phone, it does not work. Any ideas... Thank you Don

  Hi Don,

  For voicemail partners changes/updates, you should choose

  2 cisco Unity Connection Administration.

  Then; Users > Find/list > user associated with selectect > drop-down Edit > change passwords >

  Change voicemail password

  See you soon!

  SoC

  "Spend your life waiting,
  a moment that all do not come.
  Well, don't waste your time waiting.

  -Springsteen

• Cannot change the form created with Live Cycle

  My former boss, who tragically died last year, created a form pdf through Live Cycle a few years ago. The form gives the ability of the user to add text at the bottom of this if they need. I would like to be able to modify this form, but it is not letting me. All change them, insert them, options etc. are grey. I did not Live Cycle, but I don't have Acrobat Standard. How can I remove the safety of this document so that I can change it?

  It is not a question of security. You can only modify LC forms in the

  LiveCycle Designer application.

  This app used to be bundled with Acrobat (Pro), but not more.

  You have to buy separately now.