Cannot change the properties of language pack and keyboard.

Similar Questions

• Cannot change the properties of 'read only' files in xp

  Recently, I was not able to change the properties of 'read only' to my files. I click on 'Properties', uncheck the 'read only', press on apply, click OK. When I re - check the records they come up to 'read only' again. I can't find a way around it. It has stopped me to back up files, since I get the message that the files are 'read only' and cannot be changed.
  All solutions?
  Thank you

  The read-only attribute has never been applicable to files under XP. You can try to take ownership of files/folders instead.

  Appropriating a file or a folder under Windows XP [Q308421] - http://support.microsoft.com/?kbid=308421

  How can I get the Security tab in the folder properties? - http://www.dougknox.com/xp/tips/xp_security_tab.htm MS - MVP - Elephant Boy computers - don't panic!

• Cannot change the properties of the image

  Hi, hoping someone can help

  I'm adding a lot of images on my site and was eager to improve SEO so wanted to change the properties of the image so I can fill in the Tooltip and text replacement with some additional information. If I put an image on the page I can right click and change the properties, however if I used the fill option and added image for it, make a right click on the image of the page does not provide an option to edit images. Is there a another way to change the properties of the image using the fill option? My site is sceicnenewsbreak.com if necessary

  see you soon

  Garry

  Unfortunately no, the picture fill properties cannot be configured by clicking on the content. Please do not hesitate to add your suggestion in our ideas section.

  Thank you

  Sanjit

• In XP, cannot change the way users log on and outside, getting the error "a recently installed program has disabled the Welcome screen and the user fast switching.

  The switch on my fast computer of user function has been disabled on my computer. When I try to use this function. I get the following message.

  A recently installed program has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the program

  . The following file can help you identify the program that made the change. GT Gina.dll

  * original title - I have a windows xp. Under user accounts, choose a task. Under change the way users log on and outside.  I get a message that the function of the Welcome screen has been blocked *.

  Hello

  You can try the steps outlined in the article below and check out them.

  The logon screen "Welcome to Windows" does not appear when you start the computer
  http://support.Microsoft.com/kb/817142

• Cannot change the updates of Windows Vista and Norton 360

  I can't change my settings to Windows Update under Vista. I am the administrator and the only user on the computer. I'm used to be able to make changes to the settings, but have not been able to do for a month. Around the same time this started, I have updated my Norton 360. These two things are related? How can I change the settings? Updates download and install fine, but I want to change the planning parameters. Help, please. The computer has restarted several times now, while things were open and caused problems.

  Hello

  Follow the steps here to reset the file or registry permissions

  http://blogs.msdn.com/b/astebner/archive/2006/09/04/solving-Setup-errors-by-using-the-Subinacl-tool-to-repair-file-and-registry-permissions.aspx

  New attempt of changing the settings

  If that fails, run the System File Checker

  Start > type CMD

  Right click on CMD and select run as administrator

  Type sfc/scannow

  Note: there is a space between sfc and / scannow

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  Try again to change the settings if the scan shows "no breach of integrity".

• Cannot change the default input language

  Hi all

  I recently had to reinstall windows because my failed (second one) these SSD SSD are not very reliable. but this is not why I'm here. I have windows 7 ultimate 64-bit, and when I installed it I choose 101 Arabic as the input language. After completing the installation, I added US international at my keyboard and set it as the default input language. Now whenever I reset my system or disconnect the default language keeps going back to 101 Arabic.

  I tried to uninstall both languages, but that did not help. I also put the default Arabic language so that when I've reset, it will change to English (lol) but that didn't work either. I have an OEM version of windows if it makes a difference. any help would be appreciated.

  Try to copy your (Arab as the default input language) settings to the Welcome screen, system accounts and new accounts of user as described here:

  http://www.SevenForums.com/tutorials/90671-region-language-settings-copy-new-users-welcome-screen.html

  I hope this helps.

• Cannot change the properties of the Module of the Application.

  Hi all
  I'm trying to modify the properties of the module of my Application in Jdeveloper 11.1.13. I perform the following steps:
  
  (1) right click module the application and select "Configurations".
  (2) select the existing TestModuleLocal and click 'change '.
  (3) following clik the "Properties tab and try to change the property of jbo.ampool.sessioncookiefactoryclass.
  4) click the column value of the jbo.ampool.sessioncookiefactoryclass property and change 'oracle.jbo.common.ampool.DefaultSessionCookieFactory' to ' test. DynamicJDBCSessionCookieFactory' and press enter
  5) click OK and OK
  
  The changes are not reflected and return to the original "oracle.jbo.common.ampool.DefaultSessionCookieFactory".
  
  Thank you

  Just check with 11.1.1.4.0 and it works fine.
  Always on 11.1.1.3.0, I can reproduce this. I guess it's a bug in 11.1.1.3.0.

  As a work around you can add the following line to the bc4j.xcfg file

  
  
  ...
  
  

  then replace xxxx by the class representing your plant.

  You will find the thew file if you double click on the module of the application, click on the 'Configuration' tab and click the bc4j.xcfg link.

  No matter what reason, why you are not using 11.1.1.4.0?

  Timo

• Cannot change the properties of online text in the scrolling text box

  I have a simple text box with a UIScrollBar component added to it.

  Text box properties are on "enter text, multi line.

  The problem is when I want to change a single line of text to a "BOLD" or a different color, changing the content of the entire text box. I tried the setting of the different property for the text box itself with no luck.

  Is this possible? I have to use AS3?

  I would really appreciate help!

  Thank you!!!

  Steve

  If you change the html true property - either by using the property inspector or code if you are working with code - then you should be able to have different styles in a text box. This is the property that you tried and it didn't work so I need to learn more about how you try to apply the formatting.

  In cases concerning need it AS3... In general, I would say that if you do not have an overwhelming need to AS2 so you should use AS3. It has nothing to do with the text of no!

• UC540 cannot change the properties of Group of circuits ALL_FXO

  I'm setting up a UC540 with a 4-port FXO VIC, with 6 multi lines and a self-contained line.  I understand how to make outgoing calls all use the multi line would be to delete the stand-alone line of the trunk ALL_FXO group.

  Looking at

  http://sbkb.Cisco.com/CiscoSB/UKP.aspx?VW=1&docid=b7da053374e745cd80cf3c9b0c3b52a5_Troubleshooting_a_Scenario_Where_All_The_FXO_Ports_Are_In_Sa.XML&PID=2&respid=0&SNID=4&DISPID=0&cpage=search seems to give the right idea on how to draw a line or two, wowever, I do not have this button change step 2 available to... Add me it, change, removal of buttons are not there at all. What I really want to do is prevent the numbering of the ports 0/2/3 and 2/0/2.  Is there another way I can do this?

  Hello

  You should have these buttons available.  One thing to watch with CCA, is not being able to see the scroll bar on the right side.  Try to move the window in GRP, there is most likely a scroll bar that you don't see, and the necessary keys are falling over and you are simply unable to see without scrolling down.

  Thank you

  Darren

• Cannot change the properties of some mp3 files.

  I right click on a file and go to properties, then detalis everything is empty beside the property tab and I can't enter anything in value, and read-only is unchecked.

  Are you sure these are MP3 files and not another type, such as WAV? Please verify this by checking the file type in the file properties- general tab.

  Have you tried to reboot the PC? If you start Windows in clean boot mode, can change you the fields then?

  Also, please check if you can still edit the tags of the files with an editor of tags like Mp3tag owners.

  Tim Baets
  http://www.BM-productions.TK

• You cannot change the properties of the title

  I've never run on this issue before, but I'm in title Designer in Premiere Pro CS6 and cannot make changes to the font color/shade/what either. I'm sure there is a simple solution, but it's really stressing out me trying to figure out.

  

  I believe that you can size the window title so that the parameters can be off the screen to the right.

  In the upper left corner, click the green button to resize the window - do they appear?

  

  GFB

• Cannot change the properties of the page [changed subject line]

  I am deealing with someone who when they go in dreamweaver, then go to edit then Properties page they do not see the menu drop-down repeat. have version 9 build 3481. I have the same and I am able to see it. Any ideas on how to solve this problem.

  Thank you

  Bill

  Will not happen if the 'use HTML rather than CSS' is checked in the preferences?  Can't remember for sure, but I remember there that an ahd setting produces a different dialog box.

• Cannot change the language of the system

  Hello

  I would like to know who to change the language of the version of windows system 7 PRO OEM

  I just install windows 7 PRO OEM on my computer, but there is no way to change the language of the system.

  How would I do that?

  Thank you

  Francis SZe

  

  Hello

  Thank you for contacting Microsoft Community

  You must upgrade to Windows 7 Ultimate for this feature. Only Windows 7 Ultimate includes support multilingual UI (linguistics).
   
  Install the Language Pack in Windows 7
  1. start-> all programs--> Windows Update--> optional updates.
  2. open the optional updates and go to the Windows 7 language packs.
  3 select the Language Pack that you want and press OK
  4. proceed to updates
  5. representation of Windows 7 download a Language Pack
  6 automatic installation initiated after download
  How to change the display language for Windows 7:
  1. go to start-> Control Panel-> clock, language and region / change the display language
  2. turn the display language in her choose a view list drop-down language.
  3. click on OK
  4. disconnect you before the changes take effect (this will affect only the user profile under which you are logged).
  Check out these articles:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/how-to-change-system-language-of-Windows-7-home/d58fb37b-CB02-41C8-986f-22582fd35a12

   

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/can-i-change-my-system-language-in-Windows-7/0a462f2e-927c-E011-9b4b-68b599b31bf5
  Hope this helps
   
  Thank you
  Er.Mayank Chadha
   

• Cannot change the name of the file in the file properties.

  Original title: Cannot change the file properties

  Some downloaded files have a value in the box "title" under the details (after clicking Properties)
  I can't remove this 'title' and it appears so when I share the file on my network.
  The file is located on a portable hard drive, but I tried to move some files from problem to my office to see if I could solve these problems there, but nothing has worked.

  I already have
  -taking possession of the object
  -allows full control for all users
  -tried to use the "attrib - r + s' function
  -among other...

  I just want to know if there is a way to change the details of the file. On another windows help page it says something along the lines of "some attributes cannot be changed" I hope this isn't the case.

  Any help at all would be great, if no additional information is needed let me know.
  Thank you

  This information is set when the file is created.  Windows has no native ability to change.  You need a third party program.  For example, see link below.  Note that I have no idea if it's any good or works in Windows 7.  Gives you the link just to get an example of what to look for.

  abcAVI Tag Editor
  http://abcAVI.kibi.ru/

• change my phone number and cannot change the keychain

  Dear,

  gently, I changed my phone number and cannot change the keychain

  You try to make the change in the preferences/iCloud/Keychain/Options of the system? What happens when you try?

  City link below.

  • The device that uses the SMS compatible phone number you provided when you set up first iCloud keychain. A verification code is sent by SMS to the phone number. If you can not access this number, Contact the Support of Apple, which can verify your identity so that you can run the installer on your new device.

  Frequently asked questions about iCloud Keychain - Apple Support