Cannot complete the factory reset

Similar Questions

• 55XD8505 it recharges continuously--cannot reach the factory reset

  Hello

  My 55XD8505 2016 is having issues. When you enter the home menu is extremely slow and leave then it is only a matter of minutes before the device reboots. If I just start the TV and stay away from the home menu, I can watch TV.

  Now, my intention is to restore the factory settings to try to get the system going again. Normally a reset of the Android system can be done either

  (1) via the settings menu

  or

  (2) by switch on the unit with the volume on/off button + start button / stop key and use recovery menu.

  I can't do 1) since any speed, I navigate the menu of settings, the TV restarts before I can fill a selection of factory settings.

  I can't do 2) either - at least all the possible combinations of Sony, I found does not apply for my TV

  I'm all of ideas - is it possible to factory reset via the USB port (perhaps using ADB)?

  A nailed!

  I discovered that you can use 'top' under adb shell. I did the following:

  (1) connect adb

  (2) adb shell

  (3) top m 5 (this lists the first 5 cpu by using the applications)

  After running high and enter the main menu, I saw the CPU use climbing, and the app in the foreground was always/system/bin/mtkbt, which I figured well be related to Bluetooth. So, after a few attempts of menu navigation speed, I managed to enter the bluetooth menu and disable bluetooth before it restarts.

  Success! Now I can navigate the menu of home once again, I have the tried clear the data cache / anything related to bluetooth from the menu applications and then reactivate bluetooth, but alas the problem returns. So now I'm running the TV without bluetooth. I could try to factory reset the TV tomorrow to see if it helps - at least now I can actually reach the factory reset menu.

  UPDATE:

  Now after you turn off the bluetooth, I could navigate the menu to factory reset. After doing a reset complete, it seems that everything is back to normal - even with bluetooth enabled. Problem solved... Thanks adb.

• Windows cannot complete the installation in Mode without failure. To continue installing Windows, restart the computer.

  HP Desktop, Windows 8.0.  Do a restore of Windows 8 on the hard drive.  Everything is progressing very well until I get this dialog box message: "Windows cannot complete the installation in Mode without failure.  To continue installing Windows, restart the computer. "When I restart the computer the same message appears in a new dialog box.  Before the restoration of Windows, I tried to reset mode without fail to start to get the operating system will once again but failed to get the operating system to boot at all.  Finally resorted to restore to get the computer working again.

  How to exit this loop?

  OK, here's what I discovered.

  When you get the error message mentioned above, you can hold down the SHIFT key and press the F10 key.  This will put you in the command prompt.

  At the command prompt, type: bcdedit [then press enter]

  so to solve my problem I hade type: bcdedit /deletevalue {current} safeboot [then press enter]

  This put the loop I lived and finished restoring Windows 8

• All of a sudden I started getting a "Cannot complete the command because of a problem." message using the Adobe color engine Can anyone suggest what it can be and how to fix it? Thank you very much!

  All of a sudden I started getting a "Cannot complete the command because of a problem." message using the Adobe color engine Can anyone suggest what it can be and how to fix it? Thank you very much!

  Trash this stage and re - register. It could be that new file dialog tries to assign a document profile that is damaged or is no longer present on your system. If this does not work, reset the Photoshop preferences. Press ctrl + alt + shift at the launch, confirm with the dialog box that appears if you did it correctly.

  Make sure to save all your other actions, brushes and so on first!

  Shares usually work between different versions, but if certain parameters have changed they may fail right there.

• cannot complete the new connection Wizard message a connection with the specified name already exists please provide a unique connection name arrives and prevents the connection how can I solve this problem

  Cannot complete the connection to the internet, message name specified already exists, provide a continuous appear unique login name

  Hello

   
  • What operating system is installed on the computer?
  • Have you tried with another name?
  Go to network and sharing settings and check the name of the previously defined network.
   
  Try the following steps to do the same thing:
  a. right click on the Network icon located on the bar spots.
  b. click on open network and sharing Center.
  c. under view your information network base and installation connections check information (network name).
  d. try another name in order to set up a network.
   
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network
   
  http://Windows.Microsoft.com/en-us/Windows7/products/features/networking
   
  I hope this helps!
   

• "Word cannot complete the save due to a file permission error."

  I have Windows XP.  Recently, this message appeared when I tried to save my Word documents: "Word cannot complete the save due to a file permission error."  I can always eventally the record via a temporary file, but it's very messy.  "A file permission error" - what on Earth is this?  And what should I do to get things to normal?     Ron Davis, Newcastle N.S.W..

  When you press the F8 key and access the Safe Mode start screen, use the arrow keyboard keys to select "Safe Mode with networking" and press the Enter"" key.  A list of startup items you will see on the screen, but after all that, you will get a normal login screen (except the screen may seem bigger than normal and 'Safe Mode' can appear in the corners of the screen.  At this point, log in as any user with administrator privileges.  After successfully login, you should be able to right click on a folder or file and select "Properties".  When the Properties screen, you should have a 'Security' tab at the top.

  Another approach is to use the command line command "cacls" to a normal startup that will show and allow you to set permissions on files and folders.  (Start-> Run-> "cmd") and then you can use the cacls command.  The Calc command syntax can be found here:

  <>http://TechNet.Microsoft.com/en-us/library/bb490872.aspx >

  or you can type: cacls /?

  "Cacls" allows to screw things easily and quite bad so if you can switch to the tab 'Security', which is the way to go.

  HTH,

  JW

• Cannot complete the home network implementation to include this computer as it can not be seen on the network.

  Original title: How can I remove a unidentified firewall running also apparently in Windows Firewall?

  Under Windows XP with the Windows Firewall and any other firewall unidentified. Cannot complete the home network implementation to include this computer as it can not be seen on the network. Able to ping outgoing to other computers in a network, but not able to ping inbound from other machines.

  Hello

  1. what makes you think that there are unidentified, firewalls running on the computer?
  2. what exactly happens when you try the home network configuration? You receive an error message?
  3. what exactly happens when you try to ping any computer on the network? Error message?
  4. what operating system is running on this computer? Also after return from the edition of these operating systems?

  See the following articles that might help you.
  How to troubleshoot a network home in Windows XP
  http://support.Microsoft.com/kb/308007

  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• Windows Vista cannot complete the update of windows since July 2016

  Windows Vista cannot complete the update of windows

  Since the last update July 2016

  no error message, just perpetually "check updates".

  everything I start the update of windows

  help please

  Hi emiquestion:

  Long 'check for updates...' crashes and slow window updates are a currently a problem common to many users of Vista SP2 - please see the workaround suggested, I posted yesterday over BluesBlaster WINDOWS VISTA 32-BIT updates.

  Note that it is a temporary workaround and updates slow Windows will probably return each Patch Tuesday (the second Tuesday of the month) after Microsoft also releases a new batch of updates to security for Vista SP2 and IE9.  Since September 2016 Patch Tuesday updates are published tomorrow (13-Sep-2016), it would be wise to wait a day or two to execute step-by-step instructions posted on June 16, 2016, in m #l's thread of updates does not, he has been looking for updates for hours and save yourself a bit of extra work this month.  Dalai normally updates its list of Windows kernel mode driver (Win32K.sys) implemented to date required the same evening that the Patch Tuesday, updates are published by Microsoftto the http://wu.krelay.de/en/ .
  ------------
  32 bit Vista Home Premium SP2 * Firefox v48.0.2 * NIS v22.7.1.32 * MMFA Premium v2.2.1
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• Cannot complete the update of security for Windows Vista (KB2961072)

  I have windows vista and cannot complete the update security update for Windows Vista (KB2961072) KB2961072.  I also ran system update readiness tool. No luck.   Anyone have any ideas on how to solve this problem?

  I had a very very long list of updates from several years ago, now I see only about 60.  OS says I have SP2 yet, but it does not look like it.  What happened to the hundreds of updates?  I have updates of the .net Framework and part of last week.

• I have photos on a CD burning problems. I jumped in the CD to try to burn a cd, but it keeps telling me that it cannot complete the format.

  I just down 144 loaded on a picture of a CD. I saved them in my photo files. I popped in a cd to try to burn a cd, but it keeps telling me that it cannot complete the format. If anyone can help. I've never burned a cd in my life. I use Windows Vista Home Premium.

  original title: need help to burn photos to a cd.

  Perhaps the following links will help you get started:

  Windows Vista - Burn pictures or videos to a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-pictures-or-videos-to-a-CD-or-DVD

  Windows Vista - burn a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Windows Vista - which CD or DVD format should I use?
  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  Windows Vista burn a CD or DVD in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center

• error when trying to save to a flash drive "word cannot complete the save due to a file permission error.

  error when I try to record that a flash drive "word cannot complete the save due to a file permission error" (F\:filename)

  Hello

  We have recently launched a Microsoft Answers for Office forum:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Best wishes!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot complete the Installation in Mode safe

  Hi, I have a Packard Bell with Windows Vista laptop

  The graphics card on the laptop no longer works. The stops of the laptop to a black screen when loading windows, but worked perfectly in safe mode.
  I talked to the technician who said to reinstall the operating system, so I used F8 and then chose "Repair computer", and then selected recovery Packard Bell and wanted to reinstall my laptop, which has successfully completed.
  Restarting the laptop and as he cannot get to windows it cannot complete the installation of the operating system, I try to go to safe mode that loads but I get an error saying something in the sense of "Windows is unable to complete the installation in safe mode. Stop and try in windows. I'm stuck now and can not use the laptop at all. I want to be able to use the computer laptop atleast in safemode, required the installation of vista.

  I can access the command-line by F8 and then choosing 'computer repair. Can I use the command prompt to complete the installation.
  Or y at - it another way I can complete the installation?

  Thank you very much

  Hello

  you have little choice

  1. attach the graphics card

  2 and contact the manufacturer because it is their recovery process, NOT microsofts

  you already know that you can not complete the process of recovery of manufacturers in safe mode

  and we cannot help you with their recovery process

  good luck with it

• Error code: 80070490, when you try to do the factory reset.

  Hi, my laptop is Dell Inspiron 15R SE and my window always freeze once I started my pc for a few minutes... the Task Manager and the window are freezing and he wouldn't recover more, I have to shut down the pc by now the power button as restart or shut down takes forever to fill.

  I did test of ePSA, and my pc is all green (extended test since)

  I don't know what to do so I decided just to do a factory reset for pc.

  But what happens is the window give me the error code: 80070490. And it does not allow me to do the factory reset.

  Annex: this image is the result of using my Dell system health check.  (Mcafee is always automatically disabled)

  

  And another is BlueScreen Troubleshooter

  

  
  

• Problem in Adobe Illustrator CS6: could not open the illustration. Cannot complete the requested operation.

  Problem in Adobe Illustrator CS6: could not open the illustration. Cannot complete the requested operation.

  I was working on my .ai file and pasted a picture of PowerPoint to the adobe illustrator file. Then, AI crashed graphics colorful/patterns/images in my .ai file become black and white, and then I closed the file and may never reopen. I have tried a few apps demo available online recovery (as: service to restore file corrupted Illustrator for anyone ) but they do not work so far... What should I do? Thank you in advance!

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  deppie,

  Because obviously, cannot you try to copy and paste the work of a new document, one other thing that is often attempted is first of all create a new document and the file > Place (PDF summary, if any, of the) a corrupt how much can be saved this way.

  Here are a few Web sites I hope more effective where you can see if it can save the actual file, and if possible, you can pay a subscription having,.

  http://www.recoverytoolbox.com/buy_illustrator.html

  the http://Markzware.com/Adobe-Software/Fix-Illustrator-file-Unknown-error-occurred-pdf2dtp-fi collection.

  http://www.Illustrator.fixtoolbox.com/

  I remember, the first is for the victory and the second is for Mac, while the third should be both.

  Here are some pages about yourself the wrong with it:

  http://daxxter.WordPress.com/2009/04/16/how-to-recover-a-corrupted-Illustrator-AI-file/

  http://helpx.Adobe.com/Illustrator/KB/troubleshoot-damaged-Illustrator-files.html

  http://kb2.Adobe.com/CPS/500/cpsid_50032.html

  http://kb2.Adobe.com/CPS/500/cpsid_50031.html

  http://helpx.Adobe.com/Illustrator/KB/enable-content-recovery-mode-Illustrator.html

• vCenter + 3 guest - root - cannot complete the connection due to an incorrect username or password

  Hi guys,.

  It is the latest attempt to address this issue the nice way.

  We have 3 guest running VMware essentials 5.5 with Veeam B & R (recently updated v9)

  I use a unit of vCenter hosted in one of the ESXI servers. Has joined the field - but no authentication SSO or AD has never been setup for it.

  Since yesterday, I am unable to connect to no machines with my password local root - or ESXI and vCenter. I almost use the same password for the hosts and vCenter (except the vCenter last character that is special) passwords have not been changed for 400 days. (I can remember in the past I have problem with my account lockout and I had to do something in vCenter turn it off - so I guess that this has been done)

  I am guard on getting "cannot complete the connection due to an incorrect username or password" when I try to connect via vSphere client, web browser, SSH or the physical server.

  Funny but my server of Veeam speaks to vCenter as nothing happened. Veeam management shows 400 days since the last change of password for root. Also, I am able to rescan vCenter successfully. If I ask for identifying information another user from the credentials manager in Veeam he dismisses them. So somehow Veeam is still talking to vCenter...

  It's just incredibly odd that two separate passwords for ESXI and vCenter are no longer works...

  Any feedback is greatly appreciated!

  Apparently, was my old brain!

  Just enter the password once again with a slight difference and it worked. @