Firefox 4 fonts is screwed up after hibernation.

Whenever I start Firefox it works perfectly fine, but when my computer into hibernation the get fonts messed up as shown below:
Image

Go to tools | Options | Content in the menu fonts and colors, click the Advanced button.

Then change the encoding of characters by default in Western (ISO-8859-1)

If it is already set to that, uncheck the 'allow pages to change their own fonts... etc.

Tags: Firefox

Similar Questions

  • Fonts of screwed up after installing Mathtype equation

    I just got a new iMac and like the screen 4K a lot. I work with many people on a topic which has a lot of equations by using Microsoft word. I use Microsoft Office 365 release 2016. At the beginning, I can see good equations (some fonts, not horrible like my old iMac mess). Then I found that there is no Equation Editor installed with Word. I then download a trial 30-day Mathtype. After installation, all equations are so messy that I barely see anything. I uninstalled Mathtype, but can not solve the problem. I sent a request to Mathtype a few days ago, but they did not answer me. Does anyone have the same experience? Can someone give an opinion? My iOS is El Capitan 10.11.3.  Thank you very much!

    MathType probably installed contradictory policies that are still on the system. Open font book. In the menu, run the command restore fonts Standard. All third-party fonts will be moved into the folder/System/Library/Fonts/and the root/Library/Fonts/folder. A new folder named fonts (deleted) will be created next to each of the files of fonts noted. All third party fonts that may have been in the two folders of fonts will be there.

    As this command does not affect the fonts folder in your user account, the problem will still exist if there are installed by Mathtype fonts. Click anywhere on the desktop so Finder is the name of the app next to the Apple logo in the upper left corner. Press command + shift + H to open your user account folder. If you do not see the library of your account folder, press command-j. turn on the check box to display the library folder. Close this box. Now in your user account, go into/Library/Fonts /. Create a new folder on your desktop and move all fonts in the fonts folder to the new empty folder.

    After that these steps, the only active fonts on the system will be installed by OS X. Restart the Mac in Mode safe be restarted and hold down the SHIFT key. When he arrives on the desk (it will ask you to connect), restart again normally. Test.

  • My firefox cannot connect to any network after upgrade to v36 but another browser in same PC ok

    My firefox I just upgrade automatically to v36, but borrowing is no longer able to connect to any web site after reboot. (Chrome and IE has no problem). I have try to disable the proxy and prefetch IP6 and does not help. In the even they, my PC has norton installed but does not have the configuration of the firewall. The upgrade of the software automatically, please provide fix ASAP

    HI andrewcsfan1,
    I understand that Firefox cannot connect to a network after update.

    What operating system do you use? What is XP?

  • With Firefox my fonts e-mail decreased and will not respond to reset, but problem goes away when you use Explorer

    With Firefox my fonts e-mail decreased and will not respond to reset, but problem disappears when you edit from Internet Explorer. This happened with no incentives from me about two weeks ago, and no resets respond to the email. Occurs only with Fox. With ie I enlarged and adjustable policies.

    Have you tried to resize the text size by pressing CTRL and + at the same time (increase font size)?

    Otherwise, you can reset Firefox on its default settings by following the steps here: https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems

  • Satellite Pro L300 will not connect to Wifi after hibernation

    Hello

    can someone there help me please?
    I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

    The only way to do it is to restart the pc.

    Any suggestions?

    Hello!

    I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

    In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
    http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    In addition, you run the factory settings or you have installed a different version of Windows?

    Good bye

  • Satellite Pro A210 - keyboard and touchpad stop working after hibernation

    I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

    Anyone have any ideas?

    Hello

    You have installed all the drivers for your laptop? I mean especially the chipset driver.
    Check this box!

    If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

    Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

    Sorry, but that's all I can say at the moment

  • Satellite M70-148 - power on problem after hibernation

    Hello:
    Sometimes, I have a problem I can not turn on after hibernation. The fan starts, but the computer does not start again. I can only turn off again by pressing the button for a few seconds. When I remove my power cord and press the power button, I am able to start up. I can solve this?

    I've been on the internet looking for a solution and found this description of the problem, which is exactly what I have, but unfortunately there is no solution.

    "
    I'll explain the problem in detail, right after hibernation or standby IF you press power button / stop it goes blue led fan starts, HD led lights, led battery, power adapter led (if its connected) and a cd player make it sound as if he looking for a CD, and THEN stopped fan HD led turns off, no sound from CD, leaves u with button only works / stop led on, a pretty frustrating blue

    After waiting, u eventually gave up, turn it off by prolonged pressure on the button / stop and then no matter wut u do, simply starts only even the sounds and the leds as mentioned above, nothing on the screen as if its dead! No logo, no nothing.

    Give him a time (about 15 min with battery connected, or 5 minutes or less with the battery) press the button, IT U - GO, works perfectly!

    same case with the judgment but not always as put into hibernation and sleep (but once made wake-up from standby mode!), but most of the time after the judgment, you have to wait 15 min!

    No memory connected USB flash or something else!

    I have installed winXP pro SP2 above and installed the drivers and the Microsoft HOT fixes too, but the problem remains.

    I also made recovery from the CD of restoration which follows, also not good!

    I noticed that if you disconnected the battery the appliance needs less time to wake or boot. about 5 min.

    what kills me, is that the device works perfectly and I love it! I've had this problem with her!

    So what I need to know is the following: is there anyway to weather course if it's a hardware or software problem?

    its not easy to go to service local cuz its in another city! I need to try first what it takes to fix it on my own!
    "

    Thank you for your time!

    Well, there's not much to do. You have some many possibilities. Check your installed BIOS version and compare it with the version on the Toshiba site.
    If there is a newer version so you can try to update the BIOS. But please be careful.

  • Touchpad stops working after hibernation on Satellite M40

    My laptop M40 has just started having a problem with the Touchpad is, after hibernation the touchpad does not work. plug an external mouse works, I tried to disable and re activation via the control panel but it doesn't help. Switch off and then again on fact fis the Thinkpad, someone has seen this before?

    You said that this problem started now. It seems therefore that this issue was not present in the past. Am I wrong?
    So, if I m right then it looks more like a problem of software like a hardware problem.

    Usually, the first step should be a new touchpad driver installation. Then you might try to update the Windows XP operating system to the last State. You must use the Microsoft Update page to get all the fixes.

    Then download and install the tool called CCleaner. Its free and it s very useful to clean the operating system and the registry.

    If this is not enough, try to reinstall the OS from the recovery CD and test if this problem persists after installing new OS.

  • Equium - dead after hibernation, the system recovery does not work

    Hello
    I'm trying to fix the laptop of one of my friends, but so far without success. It's a Toshiba Satellite with Vista.

    She had problems with a black screen after startup in Windows Vista. I found a work around for this problem, but it was a little complicated for her... She doesn't know much about computers. ;)
    So I but it would be a good idea to tell him to always use hibernation. However, when I put the portable standby extended, all seemed fine, shutdown, power off.
    I tried and then turn it back on. Light turns green, cd drive makes noises. Nothing more. Screen remains completely black. No sounds. Keyboard input does not work. No access to the Manager startup or anything else. He left light until I pass him by pressing the button for a few seconds.
    I removed the battery and put back in place, without result.
    Connection to an external monitor shows no results.
    When I put the original CD recovery Toshiba, no results.

    So, basically a cell phone dead. Ah yes, I'm in the Brazil in a small village, away from the stores of tech support or computer. Maybe a problem material, but all was working fine until I used the hibernation.

    Any help or ideas would be very appreciated! ;)
    Daniel

    Hello

    My laptop could not wake up after hibernation too but I managed to wake up again.
    This;
    Disconnect the power adapter and remove the battery.
    Now, you will have to wait a while 1 hour should be sufficient, but you can leave the laptop disconnected for a longer time (all night long)

    After that, you must connect the battery and AC adapter and should try to light the device if it will not help you then you are in trouble
    This would mean that a serious hardware problem causing this problem and I doubt you could remedy without any help from the ASP.

  • Tecra S1: OS cannot recognize the CD Rom after hibernation or standby

    Hello world
    I have a problem with my laptop Tecra S1 and the operating system Windows XP Professional. My laptop can not recognize the CD ROM drive after hibernation modes or in sleep. And when I checked the status of the device, he told me this message "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) ». I tried to uninstall the driver and install it again, but it did not help. And if I restart the computer then the problem is solved but y at - it someone knows how to fix this problem without having to restart the laptop?

    Thank you very much

    B. regards
    Wael Devaud

    Hello

    Maybe this article can help you
    http://support.Microsoft.com/default.aspx?scid=kb;en-us;316575

    Good bye

  • Satellite L650 - screen Get back after hibernation

    First time the Toshiba user and am on information overload. When the screen is put in hibernation, I gently press the button to return to the screen. Other methods such as drag the hand on the pad (I don't know what it's called) does not work as it does with another person using the same model. Also, I put my profile as "locked" instead of hibernation, so this may be the problem. Could not find a way to change. I have this Toshiba menu marking but watched most of the places.

    What do you usually after hiberbating to restart. ? Can anyone help please?

    Hello

    Your ad is a bit confusing and I have to say that you can return the laptop after hibernation mode if you press the power button. I put t really know what you mean with passage of hand on the cushion. It turns out if the laptop is in hibernation mode, you must press the power button to start it.

    If you have any other questions, just after again.

  • Satellite L30-115 returns after hibernation too early

    Satellite L30-115.
    The lid switch opens even slight movements (with the lid closed). What makes my book out of hibernation.

    Energy saver, I put to enter the Hibernate when I press the power button and do nothing when I close the lid. So I expect to do nothing when I opened the lid, too.
    The laptop still exists, after hibernation.

    Is this a bug in the BIOS, normal behavior, is there a place to put not to resume when I open the lid? BIOS and energy savings are updated recently.

    Thank you
    Dan

    When the lid is closed the small switch will activate and laptop knows what lid are closed. Light moves this contact will be interruption and laptop think the lid is open. Because of this, your mobile PC wakes up from hibernation mode.

    A few minutes ago I tested how reacts a Satellite phone and also my new Vista preinstalled Satellite P200D preinstalled old WXP. I did the same settings that you are, and the result is the same. After the opening of the notebooks of the lid to wake up from hibernation mode.

  • Satellite L10-202 begins after hibernation without opening the lid

    Hello

    I have problem with start up after hibernation. When I close the lid computers go into hibernation. It's OK. But when I opened the lid it starts. Sometimes I don't even open the cover. I just take over and it starts.

    It is not critical, but it's very uncomfortable because when it is in hibernation, and I take it and move in a purse or bag it lights. Is it possible to configure something he'll start when I press the power button / stop and not when I open the lid?

    Hello

    As far as I know the Toshiba Power saver is responsible for the hibernation and the day before.
    In this case, I recommend first reinstall the Toshiba Power saver.
    Check it out.

  • Satellite P200-1I4: no sound after hibernation

    Sorry for my English.
    There is no sound after hibernation mode. Audio device seems ok in Device Manager, but sound only appears after reboot.

    Hello

    It is certainly a problem of Vista.

    I remember that Microsoft has released a hotfix for this problem.

    Download and install the hotfix 937077 from the Microsoft Web site:
    http://support.Microsoft.com/kb/937077/en-us

    Good luck

  • HP Pavilion 13-b000no: no touchpad after hibernation

    I have (always been) a problem with my laptop HP Pavilion 13.
    My touchpad does not work after hibernation.
    I need to remove the touchpad in Device Manager and restart to get it working again.

    HP Pavilion 13-b000no
    Model: J1X18EA
    Latest version of the BIOS: Insyde F.35
    Synaptics TouchPad SMBus, Driver: 19.2.4.10

    I know.

    And that's the point. I would like that it works under Windows 10, which does not seem possible.

    I give up. Detective Conan.

Maybe you are looking for

  • Necessary for Toshiba notebook user manual

    who can give me the instructions for the laptop Toschiba7010 CT 4.3 model No. PAP 701 E a 8026089 serial No.Or may indicate wgere do I find Thanks have a great dayRudolph Post edited by: rudolph

  • Can't use on my Satellite A100 Toshiba controls

    Hello! I have a Satellite A100 with Windows XP.The internet and CD/DVD buttons worked perfectly until a few days ago, nothing happens when I use them. I check their configuration, and it's ok.Can someone help me, please?Thank you!

  • How to reformat Satellite C660?

    Hi all My C660 is just over a year & slowdown etc, I thought I'd reformat it with the 4 discs recovery I did when I got it, the problem is, for some time now, the cd/dvd drive does not start as soon as a disc is inserted, & I have to open it manually

  • Reinstall an instrument for a VI Driver?

    Hey everybody, Earlier in a project, I set up a VI in one of my instrument drivers and registered, now I'm looking to return to the point of departure that it is. I tried to reinstall the instrument driver and it never really configures all of the fi

  • How can I go back to Vista.

    Encountered a prob with Windows update which eventually lead to the accident. My recovery dumped in me disc. Thank God I bought XP with Vista. Now, how can I get my Vista back, the only thing I have is the Vista business product key? Appreciate the s