Cannot complete the Windows XP installation.
I formatted the drive C. Unfortunately, I then started to install windows xp on a disk that I don't have the correct product code. Therefore, I can't past the Setup screen to halfway. Now I have the correct windows xp disc with the product code, but cannot re - format the drive to start a new installation. Any help would be welcome. Thank you
Hi KENNETHCAMPBELLST,
- What happens when you try to reformat the drive using the good Windows XP CD?
The only option is to start the Windows XP installation by using the correct CD and format the drive when you are prompted.
How to install or upgrade to Windows XP
http://support.Microsoft.com/kb/978307
Tags: Windows
Similar Questions
-
Upgrade from Windows XP to W7 nothing but problems.
I recently bought and installed windows 7 Home Edition premium, because microsoft does not support the windows xp more. Now all of my terrible looking graphics and I am unable to do my 'easy transfer' of my settings in my computer. It is said that there is not enough memory. Why would the transfer to proceed with the transfer if there is not enough room to put them on the same computer with the new windows operating system 7? Besides, why don't the Windows Upgrade Advisor warn me that my system would not support it. There was some software incompatibility issues but nothing that serious. I would like to go back to windows xp or windows 7 starter edition would work? I have a 2 GB of ram with a 32-bit op system. I fell I just lost my money and even less hours spent working on it. I realize it's time to upgrade, but want even this computer works for children and the wife.
Advise Windows isn't the end of everything, being together. Common sense and human interaction and research is always the majority of computing in my humble opinion. If a program can still tell you the answer - and in fact always reason - is it a good thing? ;-)
From my experience, we should always do their own research - investigating on their own. Ask others who have more experience in everything that they might plan to do a few questions so they could avoid an error. Yet, at this stage, human beings are still the best source for experience.
Windows XP should work fine for that machine. In fact - it was designed essentially around it (the machine has been designed around Windows XP--came with it). I'm sorry you had a bad experience with Windows 7 and in trouble, but I assure you - with the right material, that Windows 7 is the next Windows XP. :-)
-
Cannot complete the Windows Update in WIndows XP.
Original title: unable to update Microsoft
Used Microsoft FixIt and still... "" the following updates were not installed: ""
Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2416447)
Security Update for Microsoft .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2418241)
Update of security for Microsoft Office PowerPoint 2007 (KB2535818)
Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
I hope that it is easily solved because I am not computer savvy. Help! (Thanks!)
Hello
1. what exactly happens when you try to install these updates?
2. you receive an error message when you try to install these updates?
3. what Fix tool you run in order for the scoring of the question?
Method 1:
You can try the steps of troubleshooting provided in the links below to solve common problems with Windows Update in Windows XP.
How to resolve problems connecting to Windows Update or Microsoft Update
http://support.Microsoft.com/kb/818018
Cannot install Windows updates
http://support.Microsoft.com/kb/555461
Method 2:
Step 1:
You can also tent to start Clean Boot and try to install the stand-alone packages updates f.
To start under start-up mode minimum state click the link below.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note:
Replace the normal state computer after troubleshooting.
How to configure Windows to use a Normal startup state
After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start and then click Run.
(b) type msconfig and click OK.
The System Configuration Utility dialog box appears.(c) click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
(d) when you are prompted, click on restart to restart the computer.
Step 2:
Visit the links below to download the stand-alone packages updates.
http://www.Microsoft.com/download/en/details.aspx?ID=17440
http://www.Microsoft.com/download/en/details.aspx?ID=7756
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24723
http://support.Microsoft.com/kb/959209
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=27713
-
The file 'asms' is required to complete the Windows XP installation?
Hi all
One day, I tried to format my hard drive on my computer and now whenever I start it, it says «the installation program restarts...» "and then it takes me to a screen where it shows"the asms file is necessary to complete installation".
This happened about a week and no luck.I tried the suggestion of Microsoft to remove a registry value. but it just got worse when my mouse and keyboard no longer work. My keyboard only works in the BIOS. But, after that, I can't do anything since my mouse and keyboard do not work. I tried to use DBAN to erase the hard drive, but there is no option to boot from the drive in the BIOS. My DVD-ROM doesn't recognize any CD, and the BIOS shows no option to boot from the CD.
I ME HELPLESS SENSE!
IF SOMEONE COULD HELP ME PLEASE!
Thank you
LenixosCheck with the manufacturer of the computer for the start from cd in the bios setting. Usually, you should find the option Boot priority in the BIOS, make sure DVD rom is the first option in it.
-
Cannot complete the Windows backup "there is not enough disk space.
Original title: backup error
If you use windows 7 home premium backup & restore to backup errors program and says that there is not enough disk space when there are 1.2 to and the space required is 60 GB. Any suggestions?
Check very carefully that the insufficient space, the error message can be generated by the disk you want to save not necessarily the destination drive.
Backup Windows uses the VSS service who need free space on the drive to work. The cause is a lack of space on the system reserved partition and is generated by the VSS recorder.
-
Windows cannot complete the Installation in Mode safe
Hi, I have a Packard Bell with Windows Vista laptop
The graphics card on the laptop no longer works. The stops of the laptop to a black screen when loading windows, but worked perfectly in safe mode.
I talked to the technician who said to reinstall the operating system, so I used F8 and then chose "Repair computer", and then selected recovery Packard Bell and wanted to reinstall my laptop, which has successfully completed.
Restarting the laptop and as he cannot get to windows it cannot complete the installation of the operating system, I try to go to safe mode that loads but I get an error saying something in the sense of "Windows is unable to complete the installation in safe mode. Stop and try in windows. I'm stuck now and can not use the laptop at all. I want to be able to use the computer laptop atleast in safemode, required the installation of vista.I can access the command-line by F8 and then choosing 'computer repair. Can I use the command prompt to complete the installation.
Or y at - it another way I can complete the installation?Thank you very much
Hello
you have little choice
1. attach the graphics card
2 and contact the manufacturer because it is their recovery process, NOT microsofts
you already know that you can not complete the process of recovery of manufacturers in safe mode
and we cannot help you with their recovery process
good luck with it
-
HP Desktop, Windows 8.0. Do a restore of Windows 8 on the hard drive. Everything is progressing very well until I get this dialog box message: "Windows cannot complete the installation in Mode without failure. To continue installing Windows, restart the computer. "When I restart the computer the same message appears in a new dialog box. Before the restoration of Windows, I tried to reset mode without fail to start to get the operating system will once again but failed to get the operating system to boot at all. Finally resorted to restore to get the computer working again.
How to exit this loop?
OK, here's what I discovered.
When you get the error message mentioned above, you can hold down the SHIFT key and press the F10 key. This will put you in the command prompt.
At the command prompt, type: bcdedit [then press enter]
so to solve my problem I hade type: bcdedit /deletevalue {current} safeboot [then press enter]
This put the loop I lived and finished restoring Windows 8
-
System cannot access the windows installer (error 641)
original title: System cannot access the windows installer
Have free AVG and cannot uninstall it or install the Windows updates. message is "cannot access the Windows install. Get error 641 on windows. Vista home premium 32-bit operating system. Recently downloaded IOLO System Mechanic recommended by DELL. problem seems to be since then but do not respond IOLO
Download a FREE program called Revo Uninstaller
http://www.revouninstaller.com/revo_uninstaller_free_download.html>. It allows to uninstall any program completely, including the files of monitoring programs. works very well, that you should have no problem more reinstall after uninstall this program.
Just don't allow the computer to restart if the part of Revo Uninstaller asks you if you want to restart now or later. Select afterwards and let Revo finish an orphan looking for registry entries. Reboot after Revo ends.
TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), readhttp://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See alsohttp://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx
The Mechanic.and of dumping life system you will be happy.
UTC/GMT is 09:11 Sunday, May 20, 2012
-
Cannot access the windows installer
try to install itunes and other windows updates and I get error 643 on updates and cannot access the windows with itunes installation programs. Is there something blocking these files that they do not work
try to install itunes and other windows updates and I get error 643 on updates and cannot access the windows with itunes installation programs. Is there something blocking these files that they do not work
RE: Windows updates :
You should be psoting in section updates from Windows:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threadsHere's the tutorial for number 643.
Have a look while you wait for answers from the section updates to Windows.Windows Update error 80070643
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643Re: Itunes
You wrote. .. Cannot access windows with itunes installation programs.
The Windows Installer Service could not be accessed
http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/Questions about Apple products will be better displayed on the Apple forums.
It is where are the experts itunes and quicktime.
Apple Discussion: Category: itunes
http://discussions.Apple.com/category.jspa?categoryID=149Discussion of Apple - installation abd update itunes for Windows
http://discussions.Apple.com/forum.jspa?forumid=792Problem installing itunes or quicktime for Windows
http://support.Apple.com/kb/HT1926Uninstall and reinstall itunes and quicktime
http://support.Apple.com/kb/HT1923For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
When I was trying to upgrade from Windows 2000 Professional to Windows XP Professional, after the first reboot, the system is returned with the following message: "Setup cannot locate the Windows installation, you want to upgrade. Contact your system administrator. "in the blue screen. The only option is to F3 to exit. And the system may not start in Windows 2000 Professional more.
Hello
I suggest you follow the steps in troubleshooting section below and check if it helps:
Error message "Setup cannot locate the Windows installation you want to upgrade.
http://support.Microsoft.com/kb/242066
Hope this helps
-
Windows Vista cannot complete the update of windows since July 2016
Windows Vista cannot complete the update of windows
Since the last update July 2016
no error message, just perpetually "check updates".
everything I start the update of windows
help please
Hi emiquestion:
Long 'check for updates...' crashes and slow window updates are a currently a problem common to many users of Vista SP2 - please see the workaround suggested, I posted yesterday over BluesBlaster WINDOWS VISTA 32-BIT updates.
Note that it is a temporary workaround and updates slow Windows will probably return each Patch Tuesday (the second Tuesday of the month) after Microsoft also releases a new batch of updates to security for Vista SP2 and IE9. Since September 2016 Patch Tuesday updates are published tomorrow (13-Sep-2016), it would be wise to wait a day or two to execute step-by-step instructions posted on June 16, 2016, in m #l's thread of updates does not, he has been looking for updates for hours and save yourself a bit of extra work this month. Dalai normally updates its list of Windows kernel mode driver (Win32K.sys) implemented to date required the same evening that the Patch Tuesday, updates are published by Microsoftto the http://wu.krelay.de/en/ .
------------
32 bit Vista Home Premium SP2 * Firefox v48.0.2 * NIS v22.7.1.32 * MMFA Premium v2.2.1
HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS -
Cannot complete the update of security for Windows Vista (KB2961072)
I have windows vista and cannot complete the update security update for Windows Vista (KB2961072) KB2961072. I also ran system update readiness tool. No luck. Anyone have any ideas on how to solve this problem?
I had a very very long list of updates from several years ago, now I see only about 60. OS says I have SP2 yet, but it does not look like it. What happened to the hundreds of updates? I have updates of the .net Framework and part of last week.
-
Original title: Windows Update.
What is your PC will restart in 2 days to complete the important update installation?
That is the message windows 8 gives, after that updates are downloaded and installed.
If you do not restart your computer soon, windows will force a restart of your computer 2 days after that it has installed new updates - to complete their installation.
You must restart your computer at a convenient time for you, rather than wait two days and have it suddenly reboot maybe at an inopportune moment...
-
Hello, I have a problem and cannot complete the installation of the creative cloud, signature of the photographer, has been convfirmado and I can not download some applications, the latest CLOUDS INSTALLATION GIVES ERROR 201, I DO NOT KNOW HOW to SOLVE IT MORE.
Error 201 & 205 & 206 & 207 or several U43 errors
-https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html
-
Cannot complete the connection to the internet, message name specified already exists, provide a continuous appear unique login name
Hello
- What operating system is installed on the computer?
- Have you tried with another name?
Go to network and sharing settings and check the name of the previously defined network.Try the following steps to do the same thing:a. right click on the Network icon located on the bar spots.b. click on open network and sharing Center.c. under view your information network base and installation connections check information (network name).d. try another name in order to set up a network.Reference:I hope this helps!
Maybe you are looking for
-
This started to happen after I eliminated a shop at home app
-
To change the options of the environmental
Hello I've been refreshing UI in my application. One of the elements on the front panel is a control of the enum. I would like to change the background color to white in darker elements. I know that I can change in the Options-> environment-> the Men
-
How can I disable my trackpad on a HP Envy Touchsmsart 15j-102sa model
How can I disable the trackpad on my TouchSmart HP Envy 15-j102sa model
-
Boolean switch rendering time.
Hi all I have LabView of issue of a signal of my USB-6501. The output signal triggers a relay and turns a solenoid switch. Currently, I have a Boolean value, implemented as a button where to click to activate the signal, then click on to turn it off.
-
How to uninstall Broadcom Bluetooth software that vanish not
Hello, my situation is similar tothis issue for Windows 7, except that my OS is Windows XP SP3. I recently realized that I made the mistake of buying a Bluetooth adapter and install the Broadcom/Widcomm Bluetooth stack driver software. Now that I kno