The file 'asms' is required to complete the Windows XP installation?

Similar Questions

• Cannot complete the Windows XP installation.

  After a problem started that I could not fix,

  I formatted the drive C. Unfortunately, I then started to install windows xp on a disk that I don't have the correct product code. Therefore, I can't past the Setup screen to halfway. Now I have the correct windows xp disc with the product code, but cannot re - format the drive to start a new installation. Any help would be welcome. Thank you

  Hi KENNETHCAMPBELLST,

  • What happens when you try to reformat the drive using the good Windows XP CD?

  The only option is to start the Windows XP installation by using the correct CD and format the drive when you are prompted.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

• Where can I get a copy of the Windows XP installation for my sister. His was a virus and I had to format the drive. It's a registered computer

  Where can I get a copy of the Windows XP installation for my sister. His was a virus and I had to format the drive. It's a registered computer. I have it ready for the operating system but I need to download a copy so I can retrieve my CD-ROM/DVD-Rom drive, so I can then bring to its system and reinstall the XP and then if she wants that we can get a windows 8. I use windows 8 on this system, I bought a few months ago and it's satisfying, but I don't understand why when I got it I could do things like using the keyboard of the screen with my fingers, but now I can't even use the keyboard mouse. It won't work at all. In a way I found it better that way at the beginning because I do a lot of typing and it would freeze until I was constantly stressed. I returned to Windows 7 mode I think but not sure.  All I know is that these two things have never worked correctly, so if they are still under warranty I will bring to the Future Shop and maybe they can fix it. I wish I could turn on and off easily so it does not interfere with my writing and study of a language second.

  Ralph Sabean

  E-mail address is removed from the privacy *.

  or * address email is removed from the privacy *

  There is no legal download of XP unless a TechNet or MSDN subscription. I'm sorry.

• Vista SP2 does not updated Windows because the Windows Modules Installer (Trustedinstaller.exe) crashing

  Hello.
  My laptop Vista SP2 does not have Windows updates due to the Windows Modules Installer (Trustedinstaller.exe) crashing:

  Error message:
  "Signing of the problem:
  Problem event name: APPCRASH
  Application name: TrustedInstaller.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e01af1
  Fault Module name: wcp.dll
  Fault Module Version: 6.0.6002.18005
  Timestamp of Module error: 49e0380e
  Exception code: 80000003
  Exception offset: 0013b 972
  OS version: 6.0.6002.2.2.0.768.2
  Locale ID: 2057
  Additional information 1: fcbe
  More information 2: 21dec0ca93c87c4af4036e2c4a4d224a
  3 more information: 93a 4
  "Additional information 4: 172cbe47bfd87945783d7b08d7f02897.

  Update history shows a number of updates that haved 'impossible' to install accordingly.
  Any ideas how to solve this problem for all my PC install Windows updates pending?

  Thank you very much!

  Hi Spoon579,

  Jose is correct that we need more information. Without any information only generic suggestions that we can supply to run SFC/scannow here or CheckSUR here

• How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?

  How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?  I have already reinstalled Windows 7 from the CD, but that has not solved my problems.  When I put the factory CD in my CD player, it won't always boot from the CD.  When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.         I realize that the reformatting is not always necessary, but I caught a few viruses (despite anti-virus running) and I need to start with a clean hard drive.

  On Friday, January 9, 2015 14:30:32 + 0000, BlueKodak wrote:

  How can I boot from the Windows 7 Installation CD so that I can reformat the hard drive before reinstalling Windows 7?  I have already reinstalled Windows 7 from the CD, but that has not solved my problems.  When I put the factory CD in my CD player, it won't always boot from the CD.  When I put my Windows 7 Ultimate CD in the CD drive, it doesn't always start from the CD.

  You must go into the BIOS and change the boot on CD order
  first push.

  How to get into your BIOS? It is not dependent on Windows, but on what he
  motherboard/BIOS card that you have. In fact, you need access to the
  BIOS before Windows begins to start. A common method is to press
  the key delete when you turn on first, but this is not necessarily true
  for your computer. Watch the display carefully when you start first;
  There is often a message here to tell you what to do. If this is not the case, check
  your system documentation or check with your provider.

• Windows XP missing HAL. DLL file. CD ROM does not detect the Windows XP installation CD.

  I received the error message to the Windows startup, that I need to replace my Hal.DLL file.  I can't access a safe mode with command prompt, and CD rom does not detect the CD. I have rebuilt the Boot.INI file and still no luck. I tried to put HAL. DLL on a flash drive, but it cannot read it for some reason any. "Cannot develop"...

  Any help would be appreciated!

  Go to the store and buy an optical drive. They are very expensive. No, you cannot use the optical drive of your laptop. You can possibly create a bootable USB key with a distribution of Linux on it and copy the correct boot hard disk files. I say "may" because not all older computers can boot from a USB device. Look in your BIOS to see if your computer has this capability. If he can:

  http://www.pendrivelinux.com

  If you have not backed up your data, then you have trouble. While you're at the store also buy an external hard drive. You can start the computer with a Linux Live CD (in your new optical drive), and copy the files on the external hard drive. Then you can continue to try to repair your computer.

  MS - MVP - Elephant Boy computers - don't panic!

• What would be the Windows 7 Installer download file name?

  A couple of years ago, I bought Windows 7 to upgrade a Vista laptop.  It is a download purchase that I had to create an installation DVD of.  Long story short, I never put Windows 7 on the laptop.  I did the installation DVD is not found I want to update now.  Somewhere on my computer laptop is that file that I downloaded to create the Windows Installer DVD... but what the hell would be the name of the file?  I have my product code recorded in the receipt of e-mail from the purchase of Windows, but of course the download link for the file is now expired.  I can order a backup drive now that the download link has expired, but I prefer to find the file and do not have to wait for a disk to be shipped.

  Any help to know which files am I looking for?  I'm guessing that maybe it's a zip file?  My hard drive is full and I have no idea what file name, I should be looking.

  Thanks for any help.

  Hello!

  You may search for *.iso in Windows Explorer on the desktop.

  In the case where you can't find it you can download it here: http://www.w7forums.com/official-windows-7-sp1-iso-image-downloads-t12325.html

  Concerning
  Julia

• How to extract files from the Windows 7 installation CD?

  I remember that on Win98, I can use SFC. EXE to extract all those files. CAB files on the installation of Win98 CD and place the files extracted into a folder I want. In addition, I don't need to know where. CAB of the target file should be some.

  The SFC. EXE in Win7 replces only system files. It does not extract and put all the files as the SFC in Win98.

  So, how to extract files from Windows 7 installation CD?

  Hello

  ·         Why you want to extract the file from the Windows 7 DVD?

  ·         What file you want to extract?

  Some of the files will be locked or currently in use by the system so that you will not be able to replace their while that started in Windows 7. Therefore, SFC scan tool is used to repair any file corruption in windows 7.

  Design by default, you can extract the files. You can copy and paste the file into your Windows 7 DVD drive, refer to the article below:

  http://Windows.Microsoft.com/en-us/Windows7/copy-and-paste-a-file

  Hope this helps,

• When to remove the Windows 7 installation disc during installation

  Hello;

  I read the response on the withdrawal of the installation disc. "After the first restart, change the settings to boot from the hard drive.

  Exactly where the first reboot happens so I can see for this? For example. After the installation of windows files.

  After developing the windows files.

  After installing the updates. I tried 4 times with a facility clean and every time, because it is always start from the disc, windows loops in the installation all over again.

  Than you

  Phil

  

  Wait while Windows installs

  

  When this phase of installation is completed, Windows will restart automatically and restart in Setup again. You can unplug it at this stage.

• The Windows 7 Installation failed, error code: 0 x 80070017

  I own a legal copy of DVD of Windows 7 64-bit. I'm trying to reinstall it on my computer, which, for the time being, has no operating system installed, but 13% of expanding windows files, I always get the following error message:

  Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0 x 80070017

  What is the problem, how can I fix it? Is my Windows 7 disc damaged?

  If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  If you have several hard drives remove all except the one that you install Windows 7, and then replace it after Windows 7 is installed.

  Disconnect all external devices except the keyboard and mouse before installing.

  If using a video card and the computer has integrated video use and remove the video card.

  Unplug the computer from the internet, if you have wireless disable.

  RAM (memory) - reduce the amount of RAM. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful. If you added new RAM make sure it is also compatible.

  Windows 7 installation disc does not

  Just a few troubleshooting steps to see if the drive is bad or if the DVD player is bad:

  If you have another DVD player available try to use this drive in your computer instead.

  If you have another computer available, try the disc of Windows 7 by using this computer and see if it can read the disc, or if the disc cannot be read and is bad.

  In addition, if you purchased the retail version of Windows 7 try to put in the other disk of type bit of the Windows 7 disc and see if it works properly.

  If you cannot start Windows 7 installation disc, your computer can boot from other bootable disks?

  How to replace Microsoft software

  http://support.Microsoft.com/default.aspx/KB/326246

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• delete duplicate of the windows software installation 7

  To remove a virus I download a scan at startup files which identied the virus and asked that I reboot system to complete removal.

  Once completed, it could not fix and I was got trapped in the circle of reboot & fail to trouble.

  So I decided to reinstall windows 7 in the hope that this would eliminate the problem.

  I now have 2 Windows 7 & and a recovery disk which is right next to memory full...

  How can I remove one of the software windows 7 in order to make my computer... (I know I have already lost all my files etc. due to the double installation pictures...)

  Note that I can't find the old windows folder...

  Any help...

  To manually remove an entry in the Windows Start menu:

  Type MSCONFIG in the box files and research programs of Windows 7, then press the Enter key.  When the System Configuration window opens, click on the Startup tab, click once on the entry you want to delete, and then click Remove, and then click the button apply.

  You can use EasyBCD to modify the start menu in Windows 7, it allows you to edit the startup entries.

  EasyBCD (use the free version):

  http://NeoSmart.NET/DL.php?id=1

• Problems with the windows 10 installation partitions

  So I try to install windows 10 via bootcamp on my macbook pro 2012.

  However, I still have problems when I get to the screen of partition on windows 10 installation.

  So I opened the USB BOOT EFI and install from there.

  I enter my product key, accept the license, and I'm greeted by the partitioning. I select the bootcamp partition, but it will not format, gives me an error message, or it will allow me to format, but no real format. If I try to delete the partition I can't create a new one, because it gives me an error message. If I try to solve this problem by making the partition EXFAT / FAT always displays the problem. If I format it under OS X EXTENDED it allows me to move forward, but after installation, it simply gives me the blue screen of death trying to boot from the BOOT EFI of SSD.

  No idea how to solve this problem, I am getting very frustrated and frankly upset against apple to give instructions so little.

  Thank you.

  Is there a particular reason to interrupt the normal process flow using the Alt/Option key? Is your USB, USB2 flash drive Installer?

• Bootcamp does not recognize the Windows 7 installation DVD

  Hi guys,.

  I've never had a problem installing Windows 7 via bootcamp on my Mac, but it seems an impossible feat, right now! :))

  I have a Windows 7 bootable *.iso, but since I'm on 2010 Macbook Pro, I have to burn it to a DVD and install from there (I can't find the disk of valuable facilities).

  It is, every time that I burn it, it does not get recognized as a bootable DVD with bootcamp and not appear as a boot disk in the selection screen, you need to keep alt right after the startup chime.

  I tried at different speeds (2 x, 4 x, 8 x). I tried to convert the image using disk utility and selection of DVD/CD master and burning at different speeds.

  I'm in two DVD and I don't know what to do :) I've got El Capitan installed (so less disk utility options).

  Please help! :))

  Martin

  This latest DVD Virgin and it worked! BUT dig this error I had!

  Boot Camp only supports 64-bit Windows 8 installation. Please use a Flash DRIVE or a DVD that contains 64-bit Windows 8.

  WHAT? !!! Even though it says to install Windows 7 or a later version?

  I want to punch someone who works for Apple now!

• The Windows module installer has stopped working; I've tried patches offered by microsoft, without success...

  I get this error message saying updates cannot not be installed, including the update in windows update, that keeps me also looking for new updates. I tried to reset as suggested by microsoft of the DLL, but half of them reset properly in all cases.

  I am running windows vista family premium on a dell XPS M1530, any help is appreciated.

  BigPhut,

  Please post with the information requested here: what to post in the Windows Update forum
  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825 Mike - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot boot from the Windows 7 installation DVD. Error when installing XP "this installation disc is not compatible with your version of windows. To upgrade, you need the correct installation disc.

  Please help me

  Why my cd not DVD boot? will have a difficult time install my win7 home ed I have xp and the note ""this installation disc is not compatible with your version of windows. " To upgrade, you need the correct installation disc. For more information, see your computer system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select custom (advanced option). "always keep flashing... I already did your post, but I cant stand dvd always turn to windows xp? and my driver working I just installed win xp months ago

  Hi the prey,

  ·         What is the brand and model of the computer?

  You should check the settings of the computer BIOS (Basic Input\Output System) to boot from the CD/DVD. Check the manual or the support of the computer Web site for the same.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Run the Windows 7 Upgrade Advisor to see if your computer is compatible to install Windows 7.

  Windows 7 Upgrade Advisor - download - Microsoft Windows

  See also:

  Installation and reinstallation of Windows 7