Cannot configure IP 9148 OR via MAX settings
Warning: new user NI HW and SW, just finished SW facilities today.
Configuration:
Win 7 Pro 32-bit SP1
NIC1 - DHCP for the local business network
NIC2 - static config for test (multiple subnets)
CompactRIO 13.0.0
NOR-RIO 13.0.1
MAX 5.5.1f0
NEITHER 9148 (connected to NIC2)
NIC2 subnets:
10.5.1.x
10.5.2.x
10.6.1.x
10.8.x.x
10.9.x.x
169.254.x.x (added for NI 9148)
MAX finds the 9148, parameters default network "DHCP or Local link" and "169.254.66.100".
"" I have change of 'Static' and ' 10.6.1.1 "and" 255.255.255.0 ", click on save, and then when I'm the
Guest "You must restart the target for the changes to take effect," the network settings in
the background was restored to the DHCP/169.254.66.100. I tried clicking on Yes or no, followed
bike electric or not and the results are the same - my settings are lost.
I tried with the 'reset ip' and 'safe mode' flips in different combinations to power up and
When you click on save, nothing helps. I tried to connect via an Ethernet switch and a cross-over
cable. I tried different IP addresses and subnets (IE, 10.6.x.x) without success.
Suggestions?
Thank you.
Brian
I found a way to make it work.
The NI 9148 must be connected through the corporate LAN.
It it automatically configures via DHCP instead of link-local (169.254.x.x).
MAX is able to configure as expected.
Thanks for all the help and suggestions.
Tags: NI Hardware
Similar Questions
-
I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button. Tried unplugging and tried unplugging the modem. I would like to fix.
Modem... doing and... model number you have?
What operating system do you use on your Mac, or you are using an iPhone or iPad set things up... or a PC?
-
Internet connection xp
I am running windows xp sp3 on my laptop. After a restart of the internet connection (wireless failed). try to connect to the wireless network has this error
": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."
It's a toshiba n205. When I right click on the wireless network printer it says that it is the firewall disabled. so I'm going to allow it and it still does not work. I don't understand because it seems that the firewall was working aok before restarting. I change all of the settings.I solved this problem by changing the setting to allow windows to establish the network connection, I guess it is made by toshiba software. If anyone knows WHY this would be the case, why all of a sudden we would lose the connection, would be useful.
-
Why am I not able to choose a wireless network. I get the message "windows cannot configure this wireless connection".
When I go to network connections it shows: Wireless network Connection - connected, Shared Dell Wireless 1397 WLAN Mini - Card & connection 1394 - 1394 connected Net Adapter.
How can I solve this problem.
original title: 1394 connection?
Hi ToddHenderson,
You did changes to the computer before the show?
Method 1
I suggest you try the following steps:The error message can mean that your hardware manufacturer has provided you with its own software to wireless as an alternative configuration to Windows Wireless Auto-Configuration service.
I suggest you follow the steps below.
Use Windows to configure wireless settings
a. go to the start menu, then select run
b. type ncpa.cpl, and then click OK to open the menu of the network connections
c. Select your Wi - Fi connection service and choose the option change settings of this connection.
d. go to the wireless networks tab and check use Windows to configure my wireless network
Launch Windows Zero Configuration
e. return to the start menu and select run
f. type % SystemRoot%\system32\services.msc/s, and then click OK
g. double-click the Wireless Auto Configuration option
h., go to the startup type list, and then click Automatic. Click on apply to confirm the changes
i. Accordingly, click Start in the Service status section click OK to apply the changes.Method 2
Try the steps from the following link:
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows -
Upgrade problems. Home Premium 64-bit to 64-bit Ultimum.
I tried several times to upgrade Vista Home Premium 64-bit Vista Ultimate 64-bit. It ends at until the end, but when it restarts, it says windows cannot configure some components and starts a restoration to Home Premium. So frustrating. Any help would be appreciated.Both Home Premium and Ultimate out of support in two months. One company will receive technical support from Microsoft (security patches, etc.) after April. Here is the political Support of Vista page. 'Not applicable' entries in the column of Extended Support mean that this edition is not eligible for updates, including critical security updates, after the end of standard support on April 10, 2012.
http://support.Microsoft.com/lifecycle/search/?sort=PN&Alpha=Windows+Vista
If you can, return your ultimate and buy business. I realize that copies of business are becoming difficult to find. Another option is to upgrade to Windows 7. I suggest professional since Ultimate offer very little more than Pro (just the Bitlocker and multilingual support) and is also not intended for extended support after Windows 7 standard support ends after 2014. Professional will extend support through 2019.
Having said all this, I also had problems using the update with Vista installation option. In many cases I resorted to the use of the custom installation option. That does not work, but of course this means using Windows Easy Transfer to save your files and settings and reinstall your programs. What I eventually learned with Vista upgrade can take all day even when all goes well, then there is not much time saved during a custom installation followed in any case of reinstalling the software.
One thing you can try is to completely remove your anti-malware software. Just turning it off is not enough because some antivirus programs install a watchdog on the part of the registry. If something prevents the writing of registry entries at the end of the upgrade you so you would get a rollback.
-
Cannot access the AIP SSM via ASDM
CISCO recommendations below:
Cannot access the AIP SSM via ASDM
Problem:
This error message appears on the GUI.
Error connecting to sensor. Error Loading Sensor error
Solution:
Make sure that the IPS SSM management interface is up/down and check his IP address configured, default gateway and the subnet mask. It is the interface to access the software from Cisco Adaptive Security Device Manager (ASDM) on the local computer. Try to ping the address of management of IPS SSM IP interface on the local computer that you want to access the ASDM. If it is impossible to do a ping check the ACLs on the sensor
----------------------------------------------------------------------------------------------------------------------------------------------
I've tried everything recommended above. I can ping the host ASDM the FW and the SSM-10 module. Well, I ping the host machine and the SSM of the ASDM. I opened as wide as possible ACL. I changed the IP addresses and masks several times. The management of the ASA port and the SSM and the PC are on the same subnet.
A trace of package from the PC to the SSM shows that it is blocked by an ACL rule, and yet I opened wide. I've seen this kind of problem before and it was solved by applying the double static NAT, but I don't know how to do that if all the IP addresses are on the same subnet.
Tried everything, need help from high level.
The IDM software that comes with ASDM does not support java 1.7. The portion of the ASDM ASA supports 1.7 but launch the IPS cmdlet works only with 1.6. The TAC enginner suggested that I use the IME (IPS Manager Express) which is available for free on the Cisco's (http://www.cisco.com/en/US/products/ps9610/tsd_products_support_general_information.html) Web site.
I've been playing with it today, and so far it seems to work pretty well.
-
Community salvation.
Story: I was called to look at the configuration of vSphere for a customer. When I started looking, I noticed several problems in the environment of the person who has put in place initially. I've been noting but have done nothing to fix these up to the...
A question that I've seen is that the server vSphere does not apper communicate properly on ESX 3.5 servers. The error message is similar to a post on this forum ( http://communities.vmware.com/message/1450789?tstart=0) however the same method of solution did not work.
Currently I have two ESX hosts connected to a console vSphere. The Console displays the disconnected hosts and the error points to the problems with the VPXUSER account. I found
I searched and found several articles with similar questions, so I chose a course of action
http://communities.VMware.com/message/1168241
As a note - vSphere client connections toESX welcomes also directly works very well - don't show no problems and everything seems fine.
So - my first actions were to disconnect and reconnect one of the hosts. The operation failed with the error "a general error has occurred: unable to connect with the password of administrator of vim cannot configure VIM account on the host. After that, I followed the elimination of the VPXUSER process, restarted the agents and you reconnect the server for vSphere - to the same result. I then deleted the ESX host, removed the VPXUSER, restarted the agents and added that the host ESX back once again - but no change - the same exact error message. I don't see the VPXUSER ID are re-created by this process - so I guess that ESX and vSphere should know the ID and the password.
Nothing shows up in the var for this - but one of the articles above explains that as a result of the use of the PAM modules.
Just for fun, I also tried using the ROOT password and reallowing ROOT to connect via SSH - but I got the same failures. I also tried lifting the VPXUSER ID privleges but - same questions.
If - goes here - any ideas? I can give other details or screen caputres
ESX3:
#%PAM-1.0
Automatically generated by esxcfg-auth
/lib/security/$ISA/pam_unix.so account required
AUTH required /lib/security/$ISA/pam_env.so
AUTH sufficient /lib/security/$ISA/pam_unix.so likeauth nullok
AUTH required /lib/security/$ISA/pam_deny.so
attempts at password required /lib/security/$ISA/pam_cracklib.so = 3
shadow md5 password sufficient /lib/security/$ISA/pam_unix.so nullok use_authtok
/lib/security/$ISA/pam_deny.so password required
session required /lib/security/$ISA/pam_limits.so
session required /lib/security/$ISA/pam_unix.so
ESX4
#%PAM-1.0
account required pam_per_user.so /etc/pam.d/login.map
AUTH required pam_per_user.so /etc/pam.d/login.map
/etc/pam.d/login.map pam_per_user.so password required
/etc/pam.d/login.map pam_per_user.so sign in required
-KjB
-
ADOBE downloaded 12.exe. FLASH will download, but will not be installed. The error message is "cannot CONFIGURE
APPLICATION»Hello, please try with adobe offline installers that are available on https://www.adobe.com/products/flashplayer/distribution3.html (choose the package "Browser Plugin" for firefox).
-
Cannot configure embedded card Gigabit Ethernet...
Hello
I am using Bootcamp 2.x with 10.6.x on a 2011 end pro macbook.
Is Windows XP SP3
I want (I need) using the integrated Ethernet Gigabit 10/100/1000 BASE-T, but cannot configure it!
My Broadcom 802.11n wireless card is in place and works fine
Documentation of the specifications Apple says:
- Gigabit built-in 10/100/1000BASE-T Ethernet (RJ-45 connector)
When I ran PC-Wizard, he told me:
Network card: BCM57765 of Broadcom NetXtreme Gigabit Ethernet PCIe If I go to computer management program and open the list of Device Manager
Card Ethernet is not visible in the list of network... and control has a ethernet cards? icon...
How to proceed with the installation?
Any advice?
Thanks in advance
You have the DVD with drivers?
See also install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .
-
Cannot open email in Hotmail via Firefox. I have Vista installed on the pc and Windows 7 on the laptop, but cannot access all the features of Hotmail. I tried to clear the cache and restart Firefox, but I still cannot use Hotmail.
Not this problem when I go to Internet Explorer.
Hello, it was noted that the foxit pdf plugin is causing this issue. You can disable this plugin in firefox > addons > plugin until what foxit offers a patch/update for the plugin.
-
Cannot configure the buttons on the tablet on Portege M750
Cannot configure the buttons on the tablet on my M750, where I can donload the drivers to be able to configure them.
When I touch the botton nothing happens.
Do you have XP or Vista installed?
Have you installed Windows yourself using a version of Windows?
-
your call cannot be connected please check your phone settings
I can't make a call
Whenever I tried to dial a number, even if it's fresh, to the toll free number or carrier Customer Support number.
He always said, your call cannot be connected please check your phone settings.
Try force reboot:
http://support.Apple.com/en-us/HT201559
If no joy, then talk to your cell provider or obtain a new SIM card
-
Can I export software intalled on via MAX PXI chassis list
I am trying to export the list of softwared installed on PXI chassis for archiving purposes via MAX. This way when I need to reinstall the software on chassis I know exactly that the drivers have been used before.
Hello drakkar.
You can create a report NI Max. To do this, please go to file > create a report. Here you can select which system you want to create the report and the type of it.
Kind regards
Daniel M.
Engineering applications
National Instruments
-
Original title: C:\windows\system32\icacls.exe
For the last few days I tried to download the different elements as well as download Trend Micro security/antivirus protection. Whenever I do; try to download something or download something, I get the following error:WINDOWS SECURITY, these files cannot be opened. Your internet security settings prevented one or more files being opened.
C:\windows\system32\icacls\exeI have not found anything within windows security who would do this and when I get this error C:\... it just on my screen flashes, then disappears.
Any suggestions? I really need to download Trend Micro.
Thank you
AmySee the article below:
ID of the KB Article: 2588679.Error message when you try to open some files in Windows 7: "your Internet security settings prevented one or more files being opened."Check the following settings:
Right-click on the downloaded file. Select Properties.
Click the Unlock button.Check the suggestions the following threads:
http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/ab6de772-CE20-4621-88ce-5ae568369826Let us know if that helps.
-
"Windows cannot configure this wireless connection".
I (birthday gift) a laptop Dell Inspiron 1011 with Windows XP Home Edition. It has a "Dell Wireless 1397 WLAN Mini Card". It works wirelessly at home but when far and try using WiFi access points, if I am looking for available networks, it comes up with "Windows cannot configure this wireless connection". (She also comes up with this message at home if I search for the network, but works OK on everything that I established House). I searched online and found a "fix" of Microsoft, but when I tried to use a time warning that "this type of file can harm my computer" so I gave up.
Another area, I looked explained that the software other than Windows ensured control WiFi and it was not recommended to disable it. (No doubt, it was the Dell software?)
I'm very PC not literate and would appreciate any help very simple!
Hi sligo123
You can find this a bit confusing link. I suggest that you enable the automatic configuration service (service Windows uses to control the wireless, rather than the Dell software). Heres how:
1. click on start, then run
2. in the box, type C:/Windows\system32\services.msc/s
3. click on OK
4. in the window that appears, you should have a full range of services, scroll down until you find Windows Zero Configuration - double click on it
5. in the box, make sure that the automatic option is selected in the drop-down list box. Then click on the Start button.
Try and then try to connect to the wireless network (you may have to connect to your home network)
If this does not help, please post back here and we can try something else.
Kind regards
Daniel
Profession: IT Administator for a small UK company | Level of Expertise: intermediate (self-taught)
Maybe you are looking for
-
iPhone cannot back up on iTunes
Hello. I tried to backup my iPhone 6 in my iTunes as I always did, but it stopped working a few months prompting the error «itunes could not backup of iphone because it was unplugged» I now need to back up my phone... I've searched the web and commun
-
How to cut to the top ranks of firefox
reminder keeps poping up to installation upgrade, I don't want it if I could get an older version, that I would, but download and install it from scratch does not always help to get the new version
-
Satellite 2450-201: OS seems to remain inactive for a period
I've had my computer for about 4 years now, and while I understand that the system can start to not work properly, I was wondering if there is any way to fix the following problem. I formatted the hard drive using the software recovery on more than o
-
Satellite Pro A210 - how to retrieve it with the recovery disk lost?
I had some problems with my individual Pro A210 (AMD Athlon 64 x 2, Vista, 120 GB of HDD, 2 GB of RAM), and it seems that I did the recovery disks when new and you have misplaced them. What can I do?
-
email address to set up eprint for ande Iphone IPad
I'm trying to set up printing for my IPhone and IPad. I need an email address to do this. Thank you