Cannot connect as Admin user in a new installation of the workspace 2.0

Similar Questions

• When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. »

  original title:

  When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. "I can't spend anything for users of our families because they ask for approval from the admin and it won't work. What can I do to correct the admin user?

  You have another admin account , you can connect?
  If so, please do it and then run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, run the Microsoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft technical support below.

  3. If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: System Restore tutorialtutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Cannot connect my midnight user

  I disconnect my laptop, I tried to log in again and he said, it cannot connect to my user profile. someone pls wat shud I do.

  I disconnect my laptop, I tried to log in again and he said, it cannot connect to my user profile. someone pls wat shud I do.

  This is the error message when you tried to open a session?
  The user profile Service has not logon. Use the profile cannot be started.

  If this is the case, please use the following tutorial. It has a "Fix it for me" application as an instructions "Let me fix it myself":

  http://support.Microsoft.com/kb/947215

  If you have a different error message, then please report it.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Last year, I bought my laptop and I tried to create a second user account but I placed it somehow this account as the Admin user. I don't remember the password and my file vault is of course.

  Last year, I bought my laptop and I tried to create a second user account but I placed it somehow this account as the Admin user. I don't remember the password and my file vault is of course.

  What password? You can change a password for the account, but if you do not know the FileVault password, you are in a bind. You need to call Apple directly if you their sent an emergency password when configuring the FV.

  For a user account:

  You forgot your password

  Lion or later version

  Reset a password in Mac OS X 10.7 Lion

  OS X Lion mountain - reset a login password,

  OS X Mavericks-solve password problems,.

  OS X Lion-Apple ID can be used to reset your password for the user account.

• I can add a host for a new installation of the customer web vpshere

  I have a new installation of the UNIX client.

  I have a new installation of esxi 5.5

  I'm trying to manage the new host through the web client. How can I add this host to the web client?

  This seems to be the problem, the administrator@vc55 is you computer administrator account. Login with these and check?

  username: [email protected]

  Password: SSO master password

• Cannot connect to Admin page

  Hi guys,.

  After a power failure, the virtual environment is down.

  At reboot, vCOPs service returned to Foundation mode even if it is allowed with a key Advanced Suite.

  
  

  I tried to re-register vCOPs with the vCenter server but cannot connect more to the page/admin.

  By clicking on Login button that it remains a "check login information." literally 5 minutes then fails with a "General error has occurred."

  I checked the disk space on/data on both virtual machines and it is less than 10% used so it is not a question of space and so I did not add a new measure/data disc (see KB 2016022).

  I've done the usual audits of common sense but no luck...

  I need your help guys

  THX,

  Didier

  Hello

  I got the same question but used 2013358 KB to fix.

  I ran the script resetadminpwd.sh that came out with the error: "the password was not correctly reset" because of the command of psql not found... but it worked on the UI VM.

  Note that I used the same password that previously set, which violates the new requirements of the SP2 SLES-password only my root password was to be performed.

• Cannot "connect as current user" via the Security Server

  Hello community,

  I had a problem using the "connect as current user" option against a network outside of the enterprise security server. Connection by manually keying in the name of user and password works very well from the outside the company network For internal connections using a connection to the server instead of security server, everything works as expected without having to manually type the name of user and password.

  Single domain

  Customer of the horizon is 3.5.2 and joined to a domain

  2 Security Server 6.2.1 x

  2 Server 6.2.1 connection x

  On one of the servers of connection I got the following error message when you try to connect through the horizon customer using the option "connection as the current user:

  2015 12-28 T 20: 21:15.207 + 01:00 INFO (B 0, 08 - 0E34) < ajp-nio-8009-exec-7 > [PAEContext] (SESSION: a774_ * _b2fb) Idle Timer executor by using 1 thread (s)

  2015 12-28 T 20: 21:15.625 + 01:00 ERROR (0744-0AEC) < MessageFrameWorkDispatch > [ws_winauth] [GSSApiProcessServerContext]: negotiate failed. Error 0 x 0000000080090300 (not enough memory is available to complete this form) {SESSION: a774_ * _b2fb}

  2015 12-28 T 20: 21:15.626 + 01:00 (B 0, 08-04 B 8) WARN < ajp-nio-8009-exec-8 > [GssapiHandler] (SESSION: a774_ * _b2fb) failed connection GSSAPI: not enough memory is available to complete this application

  2015 12-28 T 20: 21:15.627 + 01:00 ERROR (B 0, 08-04 B 8) < ajp-nio-8009-exec-8 > [GssapiHandler] (SESSION: a774_ * _b2fb) cannot close the context 7 36 d-*-00D 3 with the error: unable to locate the context requested

  2015 12-28 T 20: 21:15.627 + 01:00 ERROR (B 0, 08-04 B 8) < ajp-nio-8009-exec-8 > [GssapiAuthFilter] (SESSION: a774_ * _b2fb) authenticate GSSAPI performance problem - GSSAPI_ERROR: GSSAPI failed: not enough memory is available to complete this application

  The connection to the server has 12 GB of memory in total and 9.5 GB of memory free/available.

  In the windows event log, the following error message appears:

  BROKER_USER_AUTHFAILED_GENERAL

  Failed to authenticate the user < UNAUTHENTICATED >

  Attributes:

  Node = hostnameofconnectionsserver.mydomain.com

  Gravity = AUDIT_FAIL

  Time = Mon 28 Dec 19:51:16 THIS 2015

  Module = broker

  UserDisplayName = < UNAUTHENTICATED >

  Source = com. VMware.VDI.Broker.filters.GssapiAuthFilter

  Recognized = true

  Just tried from a machine arrived in the area via the Security server. Cannot open a session as the current user. We also enabled on the external connections of MFA, but I don't think that should make a difference.

• The admin user doesn't have access to the Standard user account files

  OK, I'm lost.  It's crazy.

  After reading the reasons to do most of your work on/as a Standard user, I created a user account (quite a while) and have been using it since--and perhaps the way I did have this problem.

  If I remember correctly, this is how I did it.  I had a LOT of files under my old ID admin, so I created another Admin account and then replaced by former Admin account is a Standard user account.  I have been connected and makes every slot the user account Standard since then, with Windows poping a request my Admin password whenever he needed.

  Today, I needed to change a tax return of 2013 - and when I reloaded TurboTax last year and needed to get the State program, TurboTax wouldn't, claiming that I need to be logged in as an Admin user (I have not the popup asking my Admin password).

  OK, here's the problem.  When I have users to switch to my Admin account, after the passage, almost all the icons on my desktop disappear AND there are only a couple of files in my files of Documents Libraries\Documents\My.

  Everything to go.  I thought as an Admin user, I had access to everything.  How can I get all this stuff back (the icons on the desktop for example and other user account files, etc.)

  When I was logged in as an Admin user, it seemed that I could share files with other Useers - so I thought, Aha, that's how it works.  So I logged on my Standard user account - but the ability to share my files, etc. did not exist, at least as far as I can tell (that is, cannot find this option anywhere).

  If all goes well there is something simple that miss me that things work so that as an Admin user, I have access to other user accounts where - it is supposed to work, isn't.

  Obviously need help.  Thank you.  Ron in round rock

  In fact, I have nothing - as stated in the above comment, I could see all my files and folders User\ron

  -> This either means that the folder is already shared, or that UAC (User Account Control) is disabled on your PC. This isn't a good idea because it exposes your computer at serious risk.

  I can edit, delete, running back, I can't (or maybe since I am the only user on this machine, I should leave him alone).  Just curious as to what I did exactly.

  -> If you have shared with read/write access, you can create/edit/delete the files.

  And finally, as an Admin user, I have only 4 icons in the taskbar (IE, Chrome, Windows Media Player and Windows Explorer) - that doesn't sound right.

  -> You'll get exactly icons you placed here while it is logged on as admin user.

  And really Finally, with regard to the disappearance of all the icons on my desktop when logged in as Admin user.

  Each user has his own profile. Inside the profile, there is the user's desktop. Desktop shortcuts that are visible while connected as user A are not visible when you are logged on as user B because each user has his own office!

  There is one exception: most applications require at installation time if their shortcuts must be visible by all users. If you answer 'Yes', then the shortcuts will go into this common folder: C:\Users\Public\Desktop.

• Any way to change Firefox 4 UI upgrade to resemble a new installation of the user of Firefox 4 interface?

  I upgraded from 3.6.x to 4.0.x and the UI has not moved and 4.0.x. This has happened on Windows XP and Windows 7 computers. I would like to have the interface 4.0.x. I got a new installation of 4.0.x and the user interface is much better for me.

  The new interface is the default on Windows Vista and Windows 7 only. You also get the old user interface if you have customized the menu bar. To get the new user interface, you must hide the menu bar. Do, in the view menu, select Toolbars, then click on the entrance to the "Menu bar".

  If you need to access the menus, you can press Alt or F10 to display temporarily.

• Clear HOWTO #{securityContext.authenticated} when the user opens a new tab in the browser

  Hello world

  I use a template for my ADF Application, so I make the application menu depending on whether the user is authenticated or not, if the menu is not displayed in the login page and use a common template for all my pages:

  rendered = "#{SecurityContext.Authenticated} '"

  My problem is that the value remains, so I would like to know what is best practice to turn it off when the user opens a new tab, or maybe my approach is quite wrong?

  Thanks experts!

  Jose.

  Hello

  I changed the method, so I give the menu according to a 'login' property in a managed bean:

  With the corresponding accessor:

  public boolean isLoginPage() {}

  Var currentPage = FacesContext.getCurrentInstance () .getViewRoot () .getViewId ();

  If (currentPage.contains ("login")) {}

  return (true);

  } else {}

  Return (false) End Function

  }

  }

  Thanks for your help!

  Jose.

• Connecting to vCenter Server 4.1 - new installation

  VMware ESXi 4.1.0 build-348481

  VMware vSphere Web Access Version 4.1.0 Build 426686

  VMware vCenter Server Version 4.1.0 Build 491557

  VMware vSphere Client Version 4.1.0 Build 491557

  I used vSphere Client to access a single ESXi host for some time.  No problem with the single host management.

  It is my first installation of vCenter Server (on Windows Server 2008 R2 Standard 7601 Service Pack 1).

  As Microsoft IIS Web server was already running on this host, I used alternative ports for tomcat services:

  80 > 8080

  443 > 446

  Web Services-> 8081

  When I connect to localhost:446, I can open a vSphere Web Access session and see the following:

  

  How to contact the ESXi host and view its inventory this server?

  Then I tried using vSphere Client to administer the server vCenter Server, but cannot connect.  The error is:

  "A communication error has occurred when sending data to the server. (The underlying connection was closed: an unexpected error occurred on a send.) »

  It doesn't matter if I run the Client vSphere on the same host as the center of vSphere, or a remote host.

  I tried to use the IP addresses and host names.  No difference.

  I have disabled the firewall on the host vSphere Center.  No difference.

  Both host ESXi and vCenter Server have valid license keys.

  What should I do to get vSphere Client to connect to the server from vSphere?

  Hello

  I change ports instead IIS as vCenter server, but if you use port 446 you specify port (446) thatcustom in vSphere client as well. In the field of connection for the vSphere client

  How to contact the ESXi host and view its inventory this server?

  After establishing the connection with vCenter server, you must create the object data center and add your ESXi autonomous server to vCenter server. After you will see ESXi inventory in vCenter server

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• where are my drivers? new installation on the new hard drive

  I have a dimension e510, I put in a new hard drive. I got the windows xp disk, I added when I bought the computer. In general, the hard drive is partitioned or something with the operating system on the hard disk of windows xp.

  In any case after I installed widows xp, everything works except that I have the yellow question mark by 'other devices', I noticed that when I tried this computer with my main computer of the network. All of the devices under the heading other have no driver video Ethernet, PCi, for example - video works as I have a video card.

  So I tried to install the drivers and windows is unable to find them. I still have the installation disc into the computer. Being one of the drivers for the Ethernet - i cannot access the internet to get drivers. Help

  OK, I found the drivers on the dell site. I was able to install or update several drivers that I didn't need. the pilot opne I need comes in a cab file inpenuxp.cab.  Where do I put this? I've tried several things that work. When I low laoded the other driver of dell updtates, they all seemed different and they are all installed without problem

  Hello

  You will need to download "Intel PRO/100 VE Network Connection " of Dell on a USB key and install the driver for your Netbook have access to the internet.

  A CAB file is a ZIP , CAB file is just the Microsoft format for a compressed folder save bandwidth on their server they save as aCAB , you can open and then select all and extract here where the files need. For the most part, these files will file dell cascading, images and Html pages.

  Try to download the network card in your computer to get the correct driver installed for your problem.

  NASS - http://www.nasstec.co.uk

• Portege 2000 - new installation using the PCMCIA CD-ROM XP

  I try to install XP on Portege 2000 using the official PCMCIA Toshiba CD-ROM drive.

  Install the XP disk boots fine, but after that Setup copied the files it blue screen (BSOD blue). I'm not very tech savvy, but I think it means that the BIOS can 'see' the PCMCIA CD-ROM, but that the real image of XP loaded by the installation program cannot, probably due to missing drivers for the PCMCIA CD-ROM?

  Then, I thought that maybe I could use F6 to load additional drivers during the initial installation, but it is beyond me to create the right set of files required. I know that you can download the Freecom drivers, but I don't know what are the driver files from CD to use and how to create from scratch the txtsetup.oem file right.

  Does anyone know how to properly use F6 and load the drivers for it?

  I found a lot of messages suggesting I copy the installer to the HARD disk and launch the installation from there. My problem is that the XP installation is an upgrade CD, so I will ask you at a certain time to insert a previous Windows CD and if at that time there I don't have a working CD-ROM drive...

  First post on this forum so be nice - I did a search but not find a thread with a real solution, but of course if I miss a please report!

  Edited by topic: beneix_1

  Hello

  I managed to install Windows XP Home the Portege 2000 using the PCMCIA reader but I ve used recovery disks original Toshiba which includes the correct driver for external optical drive.

  So far I tried not to install Windows XP Home edition, using the Microsoft installation disc.

  Maybe you should get the disks of facilities and not use this upgrade disk. I think that on this path, you will be able to install WXP as suggested when you copy data from facilities at the disk directly.
  Have you tried to get the original recovery disc Toshiba WXP?

• Assign to new Coordinator of the workspace

  As I will go on vacation for a few days, how can I assign a backup Administrator?

  Hello

  If you need to grant workspace co-coordinator privilege, then go to this workspace--> Participants--> select the participant--> Edit--> role Grant "-Coordinator of the workspace.

  If you grant the group administrator role to a user, and then add that users email ID in the "Group Manager Email" field in the application of the apex.

  https://beehiveonline-apex.Oracle.com/pls/Apex/f?p=200:2:248008022748255

  Thank you
  Marcel

• Cannot connect to admin account (the user profile Service failed)

  Hi all
  When I try to access my admin account, well I typed my password, BUT this message appears:

  User profile service failed
  User profile cannot be loaded

  I can get my guest very well account, but can not use my admin... anything that can help please!
  Anyone who can help would be great

  This problem may occur if the user profile folder is deleted manually. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry. If the SID is present, Windows will try to load the profile by using the ProfileImagePath that points to a nonexistent path. Therefore, the profile cannot be loaded. To resolve this problem, see here: http://support.microsoft.com/kb/947215