where are my drivers? new installation on the new hard drive

Similar Questions

• Satellite U500 - where to get a new HARD drive during the warranty?

  Hello world

  I bought my Toshiba Satellite U500 some months in London, and a few days ago my hard drive starts to give me a such difficulties that do not correctly read and given the weird sounds. And finally at boot up to yesterday, its giving me this message "Pri Master hard disk: extended S.M.A.R.T. Status BAD, Backup and replace, press F1 for cont...» »

  Now, I realized that I need a new HD and that one is not usable. What I was wondering, is it possible to keep in touch no matter what service provider Toshiba in order to get the new HD cos this machine is almost brand NEW.

  Can someone give me an advice what to please, it would be much appreciated.

  Thank you

  Hi Edward_4,

  I agree with you. You need a new HARD drive as soon as possible because it s not recommendable to record data on a failed HARD drive.

  In any case, it should t be a problem. You must contact an authorized service provider and explain the situation. Technicians can order a new HARD drive for you and Exchange. This should be free, because your laptop is under warranty so it s age of a few months.

  On the Toshiba site is a list of all s ASP. This seems to be your interlocutor ;)
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• dv2845se, Vista, incompatible drivers, new hard drive, please help :(

  I'm fighting for a week at least. The HARD drive failed on this pc.

  So it is a pure Windows Vista 64 bit install on a new hard drive.

  It's pc to my son and he did not create recovery discs.

  I used this nvidia chipset sp36607 (evil)

  The chipset for this laptop is not listed here > HP Pavilion dv2845se Verve Entertainment Notebook PC Drivers

  I installed the drivers in this order, because I thought it was the right order. Correct me if I'm wrong.

  (1) sp36607 Chipset

  (2) graphic sp37860

  (3) sp39679 Audio (installation fails. so I used windows update to install this)

  (4) sp37859 Modem

  sp38361 5) HP Quickplay

  (6) sp38688 HP Quick Launch Buttons

  (7) sp39249 Driver WiFi

  8 (a) sp37809 Ricoh 5-1 driver card reader (I chose it because of the uncertainty and because of several apparently in conflict)

  8 (b) sp37872 Ricoh Media Card Reader driver host controller (it is on the page above)

  9 a) Alps Touchpad sp42605 the (I chose this because of the uncertainty and because of several apparently in conflict)

  9 (b) sp37855 ALPS Touchpad Pointing Device Driver (it's the one above on the page)

  (10) YouCam software sp37849

  (11) sp38081 Lightscribe

  I rebooted after each installation of driver to see if that helps.

  I have the BSOD after installing the Alps... it seems to coincide?

  Stop errors are 124 material... ram passes memtest86 + and I use a test drive Seagate tools just because I don't really know what to do at this point. I reinstalled the OS 4 or 5 times already.

  What in the world I am doing wrong? This is by far the more difficult pc for me so far.

  Any help would be greatly appreciated. Thank you, Dawn

  ETA: HDD spent Seagate long ordeal.

  Hello:

  Sorry you have such a hard time there.

  It is possible that the motherboard is shot, but not because of what you did by installing the drivers.

  The dv2000, books of Series 6000 and 9000 with the nvidia chipset and graphics had serious problems of motherboard, and the more you use the PC - especially if they played video games on it, faster boards are dead.

  HP even had a recall several years ago on these models have replaced motherboards.

  There is another possibility, and it is one of the memory of the chip is bad.  You can remove one and see if the laptop works again.  If it's the same thing, pass the memory chips.  If it still does not work, then it is possible, that it was just time to go.

  Unplug the adapter and remove the battery before working inside the laptop.

• Satellite A205-S4777: are there problems of compatibility of the 320 HARD drive

  I am replacing my sata toshiba with a sata western digital with more memory than he.
  Can someone tell me if there are known compatibility problems.

  Toshiba 200 GB Sata Drive broke down and I am substituting a western digital 320 GB SATA

  I see that you have already improved HARD drive and 320 GB. So you could tell us if you've some HARD drive problems.
  BIOS recognizes the new HARD drive correctly?

  If you have already installed the new HARD drive and have been able to install the operating system, then I put t see serious reasons why new HARD drive shouldn't t work.

• Installation of the 2nd hard drive internal

  I have a HP Pavilion a6750y, with an internal hard drive and a LightScribe DVD Super Multi burner.  The system is running Windows 7 Ultimate 64 - bit, with 8 GB of RAM.

  I want to install a 2nd internal hard drive... If all goes well.

  The original hard drive goes SATA1 on the motherboard.

  The DVD player will SATA2 on the motherboard.

  So, obviously, I chose SATA3 on the motherboard to connect my cable purchased and only plugged SATA 2nd hard disk.  So far so good.  Now the problem...

  I did not know that the SATA drives have a power connector different than the old records.  So, a single SATA power connector goes to the original drive and the other for the DVD player.  There is no third party.

  All other power connectors are old white 4 holes plastic ones.  And like 5 of them.

  If I'm screwed?  How can I get another SATA power connector?  Are there adapters that connect to the 'old' white maybe?

  Or do I have to buy a new power supply with 3 SATA connectors on this subject?

  Thanks for our help.

  -Mike

  Hi Mike,.

  All you need is an adapter like the one on the link below.

  http://www.Amazon.com/Connectland-CL-CAB40021-Molex-power-cable/DP/B003L5D0OE/ref=pd_cp_e_0

  Kind regards

  DP - K

• Installation of the third hard drive? I have a Pavilion 1090 t.

  I have a Pavilion 1090 t and I want to install a third hard drive. I find only two on the motherboard sata ports that are side by side. How can I connect the third sata drive?

  Hello

  You can use the back ESATA ports for a hard drive that is in a powered drive ESATA external enclosure.  I did this work.  However, you won't be able to RAID ESATA port devices.  I use my external ESATA drives for backups. I usually use a box 2.5 "because it is very portable.  If you don't mind working with a naked drive, then you can also use a station 'dockiing drive '.  www.Newegg.com has what need you.

• Try to find a former serial number from a previous installation on the old hard drive. Any help?

  My old pc motherboard crashed and I'll try to find my previous serial number. Any idea on where to find it in the old installation?

  Hello

  If the serial number has been saved with Adobe, then support would be able to find it.

  Please contact customer service to help you locate the serial number.

  ^ Ani

• installation of the external hard drive Seagate FoFlex Office

  How to make autorun application to start after installing Seagat GoFlex Desk drive?

  Hello
  You can follow below link that can help you to solve your problem:
  Change AutoPlay settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

• Installed Windows on a new hard drive with an old processor, the video controller, there are no drivers

  I have an old optiplex Gx280 dell and she had a damaged hard drive. I didn't need anything out of it so I got a new hard drive from Seagate internal tb and install a new copy of Windows 7 ultimate on it. I have updated all drivers for obtained with the exception of my video controller. Since then, I've used about 200 GB of space on it from the information that I want to keep, but apparently the drivers because this computer does not exist for windows 7. What should I do?

  Standard-Intel915G/915GV/910GL VGA graphics card
  Hardware acceleration is completely upward
  Dirctdraw, Direct 3D is not available

  If you can't find a driver update, you can try installing the driver in compatibility mode ' old'.  Simply right click the Installer do > properties > compatibility mode > choose OS

  Good luck

• XPS 15 (L502X) - disk HARD death - where can I get the Windows7 DVD to install the new HARD drive?

  Hello
  I have a XPS 15 / L502X 2011 - dead HDD now - and I installed a disc SSD - BUT where/HOW to get the Windows Installer DVD for my PC.
  Can not get with the old drive - I did a Rep old installtion disk - and I DO not think that this contained the windows and drivers for my DELL.
  But it doesn't! :-/

  How now to install the new HARD drive on my dell? Anyone?

  BR
  René

  ROFMAN

  If you are a resident of the United States and are the registered owner of the computer, a disk that contains the operating system specific to your system factory installed can be requested HERE.

  Note: Dell may charge for the disc.

  If you do not live in the United States, contact the Dell Technical Support which is in your country.

  Bev.

• Windows Setup could not configure Windows on hardware of this computer Installation error on the new hard drive

  Okay so if please bear with me and be patient.  I'm not tech savvy.  I know enough to be able to remove an old hard drive and put another one, but when there are errors, I don't know what to do.

  Here's the situation.

  I have a Dell Studio XPS with Windows 7 installed.  I started having these notifications that my hard drive could be a failure.  I tried everything that I could find to fix it without having to buy a new HARD drive without success.  The current system has a 1 TB Seagate hard drive.  I installed a memory additional bar thingie right after that I got the computer about 4 years ago.  (If someone tells me how to find the properties of real system, I post them if necessary).  Anyway, I bought a new WD 1 TB black disk hard to install before my old dies and loses all my photos and documents, etc...

  I took the old drive yesterday and installed the new hard drive.  I put back the case and turned on the machine.  I put in my Windows 7 installation disc.  He began installing Windows 7... It's completely past the initial screen where it says it to load it and the other... I had accepted the license agreement, but did not have to make a profile and do the work and the reader.  I hope all this makes sense.  Then it pops up this message "installing Windows could not set up Windows on hardware on this computer."  I couldn't figure out what to do from there.  I got the new drive and put the old one back to and here I am. I tried to find solutions to this problem, but I either don't can't make heads or tails out of the responses on the internet or the solution is not exactly my problem.

  Please help if you can!  And if you have any suggestions, please dumb them down so I can understand what to do.  I CAN do if loaded, you just have to not talk too irritable.  Laughing out loud

  Thank you in advance!

  Maybe not...

  The Windows installation is not happy about something, and since it gets at least started which is a good thing, but your installation problem can not really be with Windows - perhaps something about Dell hardware or your 1 TB HARD drive.

  I looked at your system and found this article that you can read to see if it sounds like your original question:

  Windows Setup could not configure Windows on hardware on this computer.

  http://www.Dell.com/support/article/us/en/19/SLN293812/en

  Since Dell has written an article for help on this subject, it means they've met enough times to take the time to compose the article and put it on their WWW site (but, they say, it is a possible resolution).

  Could you take the issue in the Dell online community where experts hang out (especially your amber light).

  Another good place for support is www.bleepingcomputer.com where there is a similar topic as your question (except Vista) on a Dell and a new disk of 1 TB (also a Seagate) and Dell ideas did not work, but someone else has found a way to fix it:

  http://www.bleepingcomputer.com/forums/t/453378/installation-fails-to-complete-on-new-HDD/

  The bleepingcomputer for your error message search reveals other areas and people who have got things to work in different ways, then it is perhaps another place to look for ideas.

  If the installation still fails it would not hurt to do the BIOS setting and see if things are getting longer, and since you are going to write the current settings before proceeding with the adjustment you can always cancel the adjustment if things get worse.

• Windows 7 installation on the new hard drive failure

  Install Windows 7 on a new hard drive. The new HDD is 750 GB Sata 3 GB 7 200 RPM.

  Windows 7 will not finish installing.

  Commissioning of repair using windows in the drive disk cannot complete until the end of Windows 7 install.

  I had installed Advanced. Creates a new 30 GB partition. Windows will create a 100 MB partition. I installed Windows 7 on the 30 GB partition. It will go the whole process until the completion step. It restarts, the blue screen appears. Where, it is said,

  (Attempt to Reset display driver and recover from Timeout failed.)

  If market, it will start to the top and do the samething.

  Before that my old hard drive went bad, I did a Windows 7 upgrade and updated all the drivers. Everything worked very well.

  Now, this is a full installation of Windows on the hard disk again.

  Here is the computer info I had saved.

  HP Pavilion a6250z PC
  -Genuine Windows Vista Home Premium (32 bit)
  -AMD Athlon (TM) 64 X 2 5600 + dual core - 2.8 GHz
  -3 GB DDR2 - 667 MHz dual channel SDRAM (2 x 1024, 2 x 512 MB)
  -512 MB NVIDIA GeForce 8500GT, DVI - I, TV, HDMI out
  -802.11 b/g USB Wireless LAN card & USB external modem
  -HDD 400 GB 7200 RPM SATA 3 Gb/s
  -LightScribe 16 X MAX drive DVD +/-R/RW SuperMulti
  -16 x Max DVD-ROM
  card reader memory 15 - in-1, 1394, 3 USB, audio
  -Tuner TV ATSC-NTSC with PVR, FM tuner, remote control
  -7.1 audio channels w/front audio ports integrated

  What I am doing wrong?

  Thank you for helping me

  I solved my problem.

  I replaced the NVIDIA card and did a fresh install and everything works fine.

  Just a ton of updates and it will be like new.

• Where and how can I reinstall the external hard drive to the new HD to the computer?

  Original title: HD crashed.

  I want to thank the person who answered my question about the HD crashed I saved all my data and window xp. My next question is, how and where can I reinstall external hard drive for the new HD to the computer? Should I send it to drive c or where? I'm not strong when it comes to computers. I know just enough to get me in trouble. Thank you.

  Hello!

  You will need to use a full copy of Windows XP.  Should be a sticker with the product key on the side of your desk or below if it is a laptop.

  Once you have this drive, you can reinstall Windows XP.  After you have installed all the software and drivers, you will be able to transfer all your data to the new HARD drive.

  If you don't have a copy of Windows XP, you can probably get a copy of the recovery from the manufacturing of computer media.  Just to provide the model and serial number and they should sent it.

• I just had a new hard drive installed (with XP), and no matter where I set the resolution, everything seems to be stretched horizontally

  I just had a new hard drive installed with XP, and no matter what I set the resolution to, everything now looks stretched horizontally.  I don't have this problem with the old hard drive containing XP

  If you did a clean installation of XP, then you must install the hardware drivers for your components. Go to the website of the manufacturer of your PC, then download and install the latest Windows XP drivers for your model.

  SC Tom

• After installing new hard drive, video card or drivers are not compatible with Windows Media Center on Windows XP

  After a computor crash and the new hard drive, my disk drive does not work in media center "video card or drivers are not compatible with media center.

  Probably a matter of resolution: you will need to install the specific video drivers XP laptop computer PC manufacturer's Web site.

  See you soon,.
  Jerry