Cannot connect call between two SX20

Similar Questions

• Connectivity options between two Playbooks?

  What are the options of connectivity between two Playbooks?

  -What is BT pairing between possible?

  -I guess if they are on the same subnet, you should be able to speak directly on Wifi?

  You should definitely be able to talk directly between two PBs on the same wireless subnet.  Note that at least in the AIR, UDP is not supported, then you are probably limited to the protocols built on TCP, for now.  Find the other device is your main problem, but would work at the entrance of the user of an IP address, or something like QR codes.

  I don't think we will have any BT support initially, but which should eventually be possible somehow.

  We see interconnectivity NFC at some point, which would allow some ways ordained to share things.

  In some simple cases, you can use the camera and a QR code, although I do not think THAT RIM has indicated any support in the short term for a barcode API so this would probably involve some third-party libraries.

  If you wanted to get complicated, you can use the audio output on one and the MIC on the other.  Which would also be you to make a "show" mode of communication, although humans nearby could get mad.  (Probably the QR code approach allows a limited form of 'broadcast' as well).

  I think that exhausts my supply of ideas for the moment.

• Cannot share files between two computers.

  I want to be able to share files between my computer and my wife we have a home network and I can see the file sharing is enabled.   When I go to the networks in Explorer:
  1. I see her computer
  2. He asks me a username and password.  What is my user name or his.
  3. password?  Is the WiFi password, the home page group passes, my password of the computer or its password to the computer.

  I have not found a combination that works.   I need to get this working so that we can both use Quickbooks. It would be useful for many other exchanges of files we currently do by e-mail.    Note that we have no problem to access two network printers, or send files to a print server that manages our tracer.

  Hello

  Sorry for the late reply.

  Method 1

  I suggest leaving the homegroup and see if it helps.

  Leave a homegroup

  http://Windows.Microsoft.com/en-GB/Windows7/leave-a-HomeGroup

  After that I suggest you refer to the procedure described in the following article and join in Group once more.

  http://Windows.Microsoft.com/en-GB/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-7&V1H=win81tab1&V2H=win7tab1

  Method 2

  I suggest you to temporarily disable the anti-virus by following the link below and check the State.
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

   

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Please let us know if the problem persists. We will be happy to help you further.

  Thank you.

• Requirements for video calls between two companies with Ex90

  Hello

  where can I get information in the order two video calls Ex90 defined between the two companies, each company has its own server CM 8.6 and Ex90 phones.

  for the momment I know just we need video communications server, but I would like to get info on how about Communications Server config and whether a specific config is required in CM server.

  concerning

  If we assume that both companies want to stick to a Cisco solution, then you will need to use a control VCS Cisco and VCS Expressway (VCS-E). You can also remove this with a solution of VCS StarterPack (according to the needs for scalability and other design objectives). The two entities should have a solution in place.

  At a high level, you would have a SIP trunk of the AAU to VCS. VCS has a relationship of peering with VCS-E and the VCS - E is sitting in your public DMZ. The VCS-E to Cust A can communicate with the VCS-E to Cust B. You can do this in fact through a peering model (commissioning on both devices of VCS - E) or you can simply use DNS and URI component to facilitate the call installation introduction.

  You will of course face the network aspect (IP addressing, the rules of firewall, etc.). You need a coordination "numbering plan" according to which (if any) the URI dialing rules have been established by organizations. With versions of the CUCM prior to 9.x, you shouldn't that numbering URI has a little support limited. CUCM 9.0 adds some improvements of numbering URI. Not that you must be about 9.0 or version later to do what you want, just that you have a different set of parameters to function as with the pre - 9.0 version.

  The above is pretty generic, but it can give you a point of reference to start with.

  HTH.

  -Bill (http://ucguerrilla.com)

• OfficeJet Pro 8600 Plus: cannot connect wirelessly between Officejet Pro 8600Plus and Linksys WRT1900AC wireless router

  Bought a new Linksys WRT1900AC wireless router.  Followed the steps of wireless configuration and connected successfully as verified by "results of analysis of the wireless network.  However, I am still unable to print/scan/fax.  Receive a message indicating that the printer is unable to connect to the server.

  Check the following:

  The blue light next to 'Wireless' suspends on printer.

  The INSTALLATION of the SCREEN ON the PRINTER (after the installation Wizzard wireless):

  IP address: 192.168.0.199

  Network name: golfer

  HostName: HPEB4DD8

  MAC: 444:1e:a1:e9:40:d7

  Direct Wireless: Off

  HP PRINT and SCAN DOCTOR:

  SSID is correct

  The signal strength is 'Excellent' @ 95

  Security-enabled = Yes

  Security type WPA2 =

  Connected = No

  Frequency = 2.4 Ghz

  No problem with previously connected D-Link DIR - 655 wireless router.

  Seems strange that any "passesses" by the results of the wireless network Test.  Yet, still unable to connect.

  Looking for any help.

  Thank you

  Mark

  Finally a resolution...

  I tried running an ePrint of New York telephone, and it worked, but still no luck wirelessly from the PC printing.

  He said that the WiFi was indeed working.  So, I did a search for new firmware and found that there was one in April of this year (2016).  Downloaded and took a chance on install.  To my amazement, it is actually installed on the printer without any connection "connected".  Who told me that there is an existing wireless link.

  Once the install is complete firmware, I tried to print a worksheet Excel from the PC, and it actually printed!  I have to assume there was something in the formware upgrade which allowed the router from LinkSys (WRT1900AC) to communicate fully and to work with the PC.  The router was published in 2014, so maybe it was.

  In any event, everything is in fully working again.

  Man y thanks to all who have shared their data entry.  I hope this could help someone with a similar problem in the future.

  Thanks again!

  Mark

• connect before between two tables

  I have this table structure

  I have what it takes to return the value on prior connection

  create table OBJECT_LIST
  (
    cal_objid   NUMBER(4) not null,
    obj_name    VARCHAR2(100),
    obj_type    VARCHAR2(20),
    obj_title   VARCHAR2(20),
    description VARCHAR2(50)
  );
  alter table OBJECT_LIST
    add constraint OBJECT_LIST_PK primary key (CAL_OBJID);
    
    
    create table CAL_ERD
  (
    obj_child    NUMBER(5) not null,
    obj_parent   NUMBER(5) not null,
    obj_rel_type VARCHAR2(50)
  );
  alter table CAL_ERD
    add constraint CAL_ERD_PK primary key (OBJ_CHILD, OBJ_PARENT);
      
    alter table CAL_erd
    add constraint cal_parent_FK foreign key (obj_parent)
    references object_list (CAL_objid);
    
    
     alter table CAL_erd
    add constraint cal_child_FK foreign key (obj_child)
    references object_list (cal_objid);
   
   
  insert into object_list (cal_objid,
                               obj_name,
                               obj_type)
                            values(1192,
                                  'MainObject',
                                  'Form');
                                  
                                  
               insert into object_list (cal_objid,
                               obj_name,
                               obj_type)
                            values(1193,
                                  'SecondObject',
                                  'Form');  
                                  
                                  
               insert into object_list (cal_objid,
                               obj_name,
                               obj_type)
                            values(1194,
                                  'ThirdObject',
                                  'Form');    
                                  
                                  
                insert into object_list (cal_objid,
                               obj_name,
                               obj_type)
                            values(1195,
                                  'FourthObject',
                                  'Form');  
                                  
                                  
      insert into object_list (cal_objid,
                               obj_name,
                               obj_type)
                        values(1196,
                               'FirthObject',
                               'Form');
                               
                           
                               
                               
                                insert into cal_erd values(1193,1192,null);
                                insert into cal_erd values(1194,1193,null);
                                insert into cal_erd values(1195,1194,null);
  
   
   

  in the first table values

  CAL_OBJID OBJ_NAME, OBJ_TYPE OBJ_TITLE DESCRIPTION
  1192 MainObject form
  1193 SecondObject form
  1194 ThirdObject form
  1195 FourthObject form
  1196 FirthObject form

  the second value of the table
  OBJ_CHILD OBJ_PARENT OBJ_REL_TYPE
  1192 1193
  1194 1193
  1195 1194

  SQL script that I am trying

  WITH t AS 
      (SELECT li.obj_name,
              li.obj_type,
              li.obj_title,
              li.DESCRIPTION, 
              LEVEL AS lvl,
              SYS_CONNECT_BY_PATH(li.obj_name, '/')paths 
      FROM object_list li,cal_erd er
       where li.cal_objid = er.obj_parent(+)
           START WITH obj_parent IS NULL
           CONNECT BY
                    NOCYCLE PRIOR obj_child = obj_parent)
    SELECT obj_name,
           LEAD(obj_name) OVER(ORDER BY paths) AS child_name,
           obj_type ,
           obj_title ,
           DESCRIPTION ,
           substr(paths,
                         INSTR(paths, '/', 1, CASE WHEN lvl > 1 THEN lvl-1 END) + 1 , 
                         INSTR(paths, '/', 1, CASE WHEN lvl > 1 THEN lvl END)                    
                        - INSTR(paths, '/', 1, CASE WHEN lvl > 1 THEN lvl-1 END) - 1 ) AS parent_name
      FROM t;
   

  
  get value

  OBJ_NAME, OBJ_TYPE OBJ_TITLE DESCRIPTION PARENT_NAME CHILD_NAME
  FirthObject FourthObject form
  FourthObject form

  I what like to be like that

  OBJ_NAME, OBJ_TYPE DESCRIPTION OBJ_PARENT OBJ_TITLE OBJ_CHILD

  SecondObject MainObject form

  ThirdObject SecondObject form MainObject

  fourthObject ThirdObject shape SecondObject

  I would like if possible show the id of ojb_name

  Hello

  Here's a way to achieve the expected results, you want to:

  WITH t AS
      (SELECT obj_parent
            , li.obj_name
            , li.obj_type
            , li.obj_title
            , li.DESCRIPTION
            , LEVEL AS lvl
            , SYS_CONNECT_BY_PATH(li.obj_name, '/')paths
      FROM object_list li
           LEFT JOIN cal_erd er ON (li.cal_objid = er.obj_child)
           START WITH obj_parent IS NULL
           CONNECT BY
                    NOCYCLE PRIOR cal_objid = obj_parent),
  t2 AS (
    SELECT LEAD(obj_name) OVER(PARTITION BY substr(paths, 1
                                                        , CASE WHEN INSTR(paths, '/', 1, 2)> 0
                                                               THEN INSTR(paths, '/', 1, 2)-1
                                                               ELSE LENGTH(paths)
                                                          END)
                                   ORDER BY paths) AS child_name
         , obj_name
         , obj_type
         , obj_title
         , DESCRIPTION
         , substr(paths,
                         INSTR(paths, '/', 1, CASE WHEN lvl > 1 THEN lvl-1 END) + 1 ,
                         INSTR(paths, '/', 1, CASE WHEN lvl > 1 THEN lvl END)
                        - INSTR(paths, '/', 1, CASE WHEN lvl > 1 THEN lvl-1 END) - 1 ) AS parent_name
      FROM t)
  SELECT *
    FROM t2
   WHERE child_name IS NOT NULL;
  

  Result:

  CHILD_NAME OBJ_NAME, OBJ_TYPE OBJ_TITLE PARENT_NAME DESCRIPTION

  SecondObject MainObject form

  ThirdObject SecondObject form MainObject

  FourthObject ThirdObject shape SecondObject

  Kind regards

  Steve

• How do I telnet between two computers in a network?

  Original title: 'telnet '.

  I want to make a connection telnet between two computers in a network, please guide me.

  I want to make a connection telnet between two computers in a network, please guide me.

  See this to start by...

  http://Windows.Microsoft.com/en-us/Windows7/Telnet-frequently-asked-questions

  If you want to use telnet via the public internet, I highly recommend to use Secure Shell [SSH]. Free (for personal use) client SSH for Windows include the mastic and the TBM. Of course this assumes that you have a server SSH running on the remote network.

  http://www.Bitvise.com/tunnelier.html

  http://www.chiark.greenend.org.uk/~sgtatham/PuTTY

  MS - MVP Windows Expert - consumer
  "When all else fails try what the captain suggested before you started...". »

• Limit the number of calls between areas of VCS/subareas?

  Hello

  I wonder if there is a way that we can limit the number of calls between two subareas, areas or VCS.

  The script as below:

  VCS-E (owncompany) < -----neighbor/traversal/dns="" zone="" over="" internet------=""> > VCS-E (partner)

  My intention is to limit to 5 video calls from VCS-E (partner) so that the 6th call (dial in endpoint) will be blocked.

  I know that we can control the total bandwidth between areas using links & pipes but that does not stop the remote end to lower their rate of recall and deal with several endpoints.

  Thank you.

  Hi Hafiz,

  have you tried to disable the 'downspeed by mode of appeal"in a configuration of Bandwidth?

  try disabling the "downspeed" by call OFF mode under VCS config-. > bandwidth--> configuration.

  This will not allow the calls get the downspeed but it must block because of insufficient bandwidth.

  Thank you

  Alok

• Connect between two different applications. A call to the other application.

  I would like to know if it is possible to connect between two different applications in oracle apex IE appeal one request for the other? If the applications are allowed even say LDAP.

  Yes,

  Refer to the post office, requested by me and answered by fac586

  How to use one login for all applications in one only workspace

• "No video in" error when connecting two SX20! Help, please

  Hello everyone

  We have problems to connect our two SX20 telepresence equipment, which has a bridge. When you call one SX20 on the other, once the connection is established, the message "no video in" appears on the screen. How to solve this problem?

  Also, we want to call the SX20 of jabber accounts video from computers and vice versa. How can do us?

  Currently, we only connect the two SX20.

  This is the deployment, we want to have.

  

  Thanks in advance

  In most cases no video is caused by firewalls and other devices with a logic of layer-3.

  You also had a different thread open material a generic question of deployment.

  Maybe you have a cisco partner or an external consultant who can help you with that.

  As you also said mobile devices, if a 3rd party there is always a chance that

  devices do not understand well the other on road signs or the face of the media.

  But at least two sx20 should be able wiith all problems to send and receive video

  If deployed stand alone or with a call like vcs or cucm control.

  Which brings back once again, check the network ;-)

  Please remember useful frequency responses and identify useful or correct answers.

• Get the message "This Mac cannot connect to iCloud due to a problem with my Id, open Preferences to solve iCloud iCloud" after entering my password which is accepted and then after a minute or two messages is.

  Get the message "This Mac cannot connect to iCloud due to a problem with my Id, open Preferences to solve iCloud iCloud" after entering my password which is accepted and then after a minute or two messages is.

  I'm your pain ptapp!

  Through my research for an answer that solves this problem, I have found that not even Apple knows how to solve this problem of password to iCloud.

  All 4 of my devices constantly ask my password because of some problems with xyz account.

  Then I enter the password only to be told that iCloud cannot check my password.

  Then after several repetitions of this I get locked and have to go to the site apple id to change my password.

  I didn't spend $6 000 on these beautiful devices so I could spend countless hours dealing with support (with no positive result) and find themselves just beyond myself in frustration. I have a Mac Pro, 2 iPads, 2 iPhones and an iPod touch. All are behaving this way, no matter what it is I'm doing at the time.

  Apple needs to fix this problem, if they have any idea how to.

• Try to set up a direct parallel connection between two computers in Windows XP Home edition

  I tried to set up a direct parallel connection between two computers in Windows XP. I have the right cable (CAT 5 Ethernet connection) and you can set up the connection on my own laptop, but when I go through the installer on another laptop it create new connection-establishment of advanced connection--> when the next window opens asking me to choose between "accept incoming connections" and "connect directly to another computer" (which I need to select) for the second option is grayed out and not can not be selected.

  The same thing happens when I try to implement the same connection between my laptop and the desktop we have. All of these computers are running on Windows XP service pack 2. I really need help with this because I'm about to start pulling my hair.

  Any help would be very, very, much appreciated.
  Thank you

  Hello

  Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3423&messageID=11170

  I hope this will help you.

• "Limited connection" when you configure the network between two computers XP.

  Original title: Configuration of the network connection

  Trying to establish a network connection between two home PCs., both running Windows XP Pro. Have been through the network on both PC Setup Wizard but, they still say limited, in fact no connection. I use an Ethernet cable between the two Crusader. If it is true what I'm doing wrong?

  Thanx Terry

  Old but good, networking tips from MVP Malke, MS:

  The best and simplest is to buy a wireless router. This way you get Internet connectivity both machines and the added benefit of security more between you and the Internet. Then you configure your network wireless safely, and then you configure file/printer sharing. Here is information on the implementation of a router and also in networking. It seems long, but don't be intimidated. Setting up a router and the LAN of sharing between two computers takes about 15 minutes.

  The router configuration

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.

  2. attach a cable (usually supplied with the router) course Ethernet cat5e Internet/WAN port of the router to the Ethernet port on the cable modem.

  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.

  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

   

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar.

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). If you have a newish computer, you will be able to affect security WPA2-Personal Mode. Do this and enter a password. The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the Ethernet cable and wireless of the computer should see your new network. Enter the password you created to join the network and start surfing.

  *****

  B. file/printer sharing of

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• duplicate calls made using the alias between two codecs C40

  We have 2 new codecs C40.  When calling between the two using the alias, it seems that 2 calls are made.  In a sense, we get a very quick disonnect message upon acceptance of the call.  In the other direction, the call comes in, but on disconnect, we get a message saying missed call.

  Seems that the search rules can be duplication of the call some how - probably him endpoint becomes a call SIP and H.323 call at the same time. Could you post the call details and history/details of research?

  Sent by Cisco Support technique iPhone App

• Bluetooth connection between two 7290

  Hello

  I want to create a connection between two BlackBerry 7290 with OS 4.1 I found something with BluetoothSerialPort, but if I pair the und devices 2 start the application I get no BluetoothSerialPortInfos with the static method of the BluetoothSerialPort class.

  I tried to create a BluetoothSerialPort without an Info but that does not work. I get an IOException to Scripture.

  public boolean keyChar (key char, int status, int time)

  {

  If (key is Characters.ENTER)

  {

  Try

  {

  _port = new BluetoothSerialPort ("Hi there", BluetoothSerialPort.BAUD_115200, BluetoothSerialPort.DATA_FORMAT_PARITY_NONE |) BluetoothSerialPort.DATA_FORMAT_STOP_BITS_1 | BluetoothSerialPort.DATA_FORMAT_DATA_BITS_8, BluetoothSerialPort.FLOW_CONTROL_NONE, 1024, 1024, this);

  H = 'hi. '

  _port. Write (h.GetBytes ());

  }

  catch (Exception e) {Dialog.alert (try ()) ;}}

  }

  }

  At this point, I get the Exception when writing. Can someone help me please? Martin

  When you pair the Bluetooth devices, they exchange a list of services they support.  This means that you will need to have a server side application up and running which listens to the incoming Bluetooth connections before they are matched.  Otherwise, the other Bluetooth device will not know about your application and will not be able to connect to it.