Cannot connect on Lightroom Mobile

Similar Questions

• Cannot connect AnyConnect Secure Mobility Client IPSec 3.0

  Hello

  Our company has a configuration of IPSec VPN on a Cisco ASA 5505.  We previously using the Cisco VPN Client - Version 5.0.07.0410.  Everything worked well with this customer to date.  The problem is it is not supported in our Virtual Machine, and environment with our new version of our networks paravirtualized drivers we get the problems of inadequacy HMAC and not connect to.

  I created a file .pcf with the following information for the 5.0.07.0410 customer:

  Input connection: VC VPN

  Description: no

  Host: xxx.xxx.xxx.xxx (IP address of the Interface of the ASA VPN)

  Authentication group:

  • Name: The name of the Group
  • Password: password for pre-shared Key

  Transport:

  • Activate Transport tunnel
  • IPSec over UDP (NAT/PAT)

  I import the .pcf file in the client, the client connects, you are prompted for AD username - everything has worked well.

  We have currently met that he had to use the Cisco AnyConnect Secure Mobility Client (3.0.0629) - I tried to use the profile for that AnyConnect client editor and I can't not all profile options.  I leave all the defaults preferences (Part1), preferences (Part2), backup servers, matching certificate, Certificate Enrollment and the mobility policy.

  I in the list of servers, click Add.  I enter in the hostname, host (the host name IP address) address and group.  There are no backup servers, I change the main IPSec protocol, save the profile and place it in C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile (Win7).  Open the AnyConnect Secure Mobility Client and the profile is loaded. Trying to link returns "VPN Agent is unable to establish a connection."  ASA, I don't even see a connection attempts to the outgoing IP address.  On the client, I can ping the ASA and connect with ordinary VPN Client.

  I can't find a place to enter a pre-shared in the profile editor.

  The AnyConnect client seems also not to read the .pcf files.  Am I missing something here?

  My package DART from the failing client is attached.  Any help would be greatly appreciated!

  Kind regards

  Rich Alto

  Rich,

  AC uses IKEv2 (for IPsec) which is not yet supported on SAA. Support is planned for 8.4 ASA which is still at least a few weeks.

  HTH

  Herbert

• Cannot connect to Lightroom 5 account

  I bought an account 5 Lightroom in 2014, but can't seem to connect to my new computer.  Said that my serial no is not good.

  I have the correct serial number in box & please refer to https://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  It will be useful.

  Thank you

  Stéphane

• Cannot connect hp h470 Mobile Hotspot (error included) iPhone

  Hello.

  I'm trying to connect my iPad to my HP H470 to use it as a printer AirPrint.

  I use the installation program with the printer connected to my computer via USB - both my home computer and Setup are recognizing my hotspot and I typed the correct password.  I get this error at the end

  "The wireless radio does not work. Contact HP support.

  Your accessory wireless is not connected. After connecting the accessory wireless click try again. »

  What can I do to get this connected printer to wireless?   I also tried that in fact a home printer shares, and its not allowing me to do either.  I've exhausted all the forums that I found online - none really give me a great answer.  I hope you can help me out before I have office space that thing.

  Any input you have will be greatly appreciated.  Thank you very much.

  Dana

  The adapter is HP Q6274A reference number, but I don't see on www.shopping.hp.com

  I found it always available from 3 third-party sites.

• Cannot connect in mobile since Lightroom Lightroom

  I get a message: your computer does not have to be connected to the internet when I try to connect to Lightroom Mobil. On the net and mobile it's OK. I have a version of the track and I had a try of lightroom mobile before. I tried many suggestions in the forum, but they have failed so far

  Hi Helgeto,

  Greetings!

  Try the procedure described in the link here: (cloud creative connection errors)

  Concerning

  Jitendra

• Wireless Manager cannot connect to 3G T-Mobile provider

  Hi @ all,

  I test the Toshiba Wireless Manager 5 (5.2.1047.66) on Windows 7 RC1 64 bit and I have the problem, that the Toshiba Wireless Manager cannot connect to T-Mobile. He always timedout while trying to connect.
  I don't see why. If I use a numbering Windows connection then I'll connect to the ISP network.

  does anyone have an idea?

  Kind regards

  Alen Ahja

  Hello

  The profile used is taken from your provider's SIM card - do not try to create one yourself. He usually works with the settings.

  Try this:
  1. disable the 3 G module and exit the Wireless Manager.
  2. wait 5-10 seconds.
  3. turn on the 3 G module, and then open the Wireless Manager.

  Should work?

  I have the problem that the module disconnects after a while. After it is not possible to reconnect because the Wireless Manager does not respond or I get a problem of downtime as yours.

  See you soon
  Kingkiwi

• TOSHIBA f3507g cannot connect to mobile broadband from 3G (error code 0)

  It's really a strange situation. Yesterday I installed the latest 3GRF POWER UTILITY and driver F3507g 3 G then inserted the SIM 3G, my laptop can connect to the internet (HSPA) normally, but today when I download and install the latest software WIRELESS MANAGER in others to check data and texting, but now my laptop cannot connect to the 3 G network but that laptop still the 3 G signal. I also tested for texting on my phone and it works but connect to the 3 G internet is impossible. I tried to uninstall all the drivers of 3G and reinstall it again, but it does not work. When I cheking troubleshooting, he said that "the operation of network connection mobile broadband failed with error 0". I use win7 and download the driver 3G [http://aps2.toshiba-tro.de/wlan/]. Please help me, thank you very much!

  Hello

  What operator and SIM are you using? It works if you connect through the Win7 built-in connection manager? That is to say through her view available networks?

  Since you are able to receive text Messages, you can register properly to the network. This should be a profile/network problem. It works if you create a manual Profile Manager wireless with the correct settings for your carrier?

  It works if you use square DUN? See Howto on http://aps2.toshiba-tro.de/kb0/HTD9802OF0000R01.htm

• Z10 blackBerry cannot connect to the network mobile/phone on Z10

  Please, I am unable to connect to the mobile network. cannot make or receive calls.

  whenever I restart the unit on Black berry z10, it resets the date and time of the year 2015 instead of the year 2016.

  It has been a challenge after that my camera has been upgraded to 10.3.2.2836

  Please I need your help

  As a last resort, I would use an autoloader to reload the operating system.  If this does not work after that then it is a hardware failure, or the device is not compatible with the networks in your area.  Assuming that this worked before and suddenly left leads me to believe that it's a hardware problem.

  http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...

• Extension mobility / CAD issue: "You cannot connect because the phone is compatible IPV6"... help please.

  Hi all

  I'm having a problem with the mobility of the extension and CAD.

  UCCX 8.0.2.10000 - 41

  8.0.2.40000 - 1 CUCM

  CAD 8.0 (2)

  Phone: 7945G (configured according to other phones no 'contact center' of society, but not 'line' unaffected - want them purely for Contact Center users to connect to their posts)

  When the user logs in the phone itself, there is no question at this point.

  When the user goes to sign in CAD, they are presented with the following error:

  "You cannot connect because the phone is IPV6. IPv6 compatible phones are not compatible with CAD. »

  Workaround is to unlock (settings > * #) Network Configuration on the config of IPV6 phone and physical removal.

  Settings > * # > 2 (Network Configuration) > 2 (Configuration IPv6) > button 'more' > 'Clear' button > it presents 'clear IPv6 network settings '.

  The user can then successfully connect to the CSA.

  The problem is that, after his shift, the user logs on to the phone, then when they log in again, the question is again presented and the 'workaround' to manually remove the IPv6 configuration out of the phone must be done all over again (and each time after that too). Arrrrg.

  I also noticed that in CUCM > devices > Device Settings > Commond Device Configuration > find > my CDC > the IP address Mode IS set to "IPV4 and IPV6.

  A test, I've changed that to "IPV4" only

  User logged off phone, phone rebooted, logged in user, has attempted to connect to CAD, same problem. No change! Ahh some more!

  Finally, I discovered an alternative (to avoid the issue and the previous workaround)... CUCM, I put devices > phone > find > select > sub-heading ("phone Configuration') 'Extension Information' >"Logout profile"profile of mobility of users and then we do NOT have the issue. Phone restarted, connected, do not connect you, tried all the different States - everything works fine now.

  I also found that by setting up a 'line' on the device - the problem is also solved.

  HOWEVER, I don't really want to specify a line configured to the individual if possible phones or mobility of the specific user profile.

  Is it possible to avoid this? What Miss me to avoid specifying a line or a profile on your phone?

  See you soon,.

  Brett

  Post edited by: Brett Hanson (in the message original, I've specified only the version 8.0.2 as version - to make this discussion more relevant, I just put in the details of the full versions we ran when the issue was present.) CAD, except that I don't remember what version it was then).

  Hi Brett,

  I saw something similar once I installed UCCX 8.x to a customer.

  Workaround there had to be a SU installed on the UCCX.

  If it helps,

  Kind regards

  Juan

• Cannot synchronize Lightroom Mobile with Lightroom CC

  I have a new CC (the version for $ 9.99).  I am registered on my Mac Pro desktop computer.  I downloaded the app to my iPad Pro by following the link to the support page.  I am connected to the application and that you can access the camera roll.  However the application does not seem to connect to the catalog at all.

  It syncs both ways.

  But to be able to get images of Lightroom in Lightroom Mobile Office, you need create collections on your desktop of Lightroom and enable synchronization for them

  Refer to this article: using Adobe Photoshop Lightroom | Sync desktop Lightroom and Lightroom app

• Lightroom Mobile (Android) - cannot copy and paste settings

  I recently started using Lightroom Mobile on my Android phone, and I find it very useful.

  I found the menu that appears if you press on a picture - it was 'copy settings... ". "and"Paste Settings... ". "as an option, but these are still grayed out.

  How can I activate these menu items, such as copy and paste settings would be very useful!

  See you soon,.

  DavidP

  Mohit answer lead me to take another look, and I worked it out.

  When you first go in an image and try the long support, the menu with copy / paste grayed out:

  

  Somehow (I don't know the internal mechanism) parameters are not "active" for this image. What you have to do is click on the cursors icon (). The settings opens, but themselves are grayed out initially. They come to live in a few seconds.

  Once these parameters are under tension, the copy and paste menu items come live in the menu press and hold:

  

• Question Lightroom Mobile Sync

  Hi all

  I think that ultimately, I need help from technical support Adobe, but that throw out there for others who have similar questions.  I've had two different subscriptions with Adobe (don't ask why): (1) monthly subscription to the photographer who included Photoshop Lightroom and Photoshop CC, and (2) a single subscription to InDesign.  I obviously should have bought the full suite of CC knowing what I know now.  I noticed the Black Friday sale before Adobe offered and contacted support by chat for 1) cancel subscriptions for both above and 2) replace them by a subscription to subsequently complete CC I thought allowed access to all Adobe applications.

  When I run Lightroom in my identity plate area, I try to use Lightroom Mobile sync (worked until I canceled my photographer package) and am currently get a message that my laptop Lightroom has expired and cannot perform the synchronization between the Office of Lightroom and Lightroom on iOS.  When I connect to my account on the Adobe Web site to watch to see what subscriptions I active, I show two lists: (1) my newly acquired Creative Suite of cloud and the package of 2) my expired photographer listed have expired.

  Yet once again, I expect that the full suite of Cloud Creative should have allowed me to synchronize Mobile with Lightroom.  Instructions for Lightroom syncing seems to indicate that this is the case (screenshot below).  All advice appreciated words.

  Thank you!

  

  Hello

  The problem has been solved since the back-end, could you please sign out of Lightroom and then sigh, LR mobile should work now.

  Concerning

  Rohit

• Skype cannot connect (yes I have tried re installing/setting far and deleted my roaming folder of Skype)

  So as the title suggests, Skype cannot connect and yes I have updated to the latest version and have removed the trace of the Skype folder in the folder of the mobile.

  N0nUhn0nym0s wrote:

  IM using Windows Firewall that, ive tried time Skype for the permit.

  For my anti virus I don't have unless the Hitman Pro, Ashshampoo and mcafee site Advisor is considered to be one

  My internet Explorer, that I do not and cleaned the cache and cookies, is version 11

  Try the following:

  http://community.Skype.com/T5/Windows-desktop-client/quot-quot-error-Skype-can-t-connect-quot-quot/m...

• Satellite C660D - Windows cannot connect WIFI

  Hello!

  Model C660D with Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC versio = 1005.24.712.2011 is not able to connect to the Wlan router. It is said after giving the WEP key that "Windows cannot connect. Clearly the wireless network card is on, it is visible in Device Manager ("works"), power for Win7 options do not play any role, the connection cable for the same router works, other computers as well as mobile phones are able to connect, reset the router does not help, Wlan driver is just updated (see the above version number).

  The router is Cellpipe 7130 RG and works well with other computers.

  The problem seems to be in communication with the router, but where and how to solve?

  Can you connect if you disable WLAN encryption in your router?

• Web services Officejet 8100 printer cannot connect to the server

  I tried to set up ePrint - HP connected on my Officejet Pro 8100, which, for some reason, it's own decided to disable the eprint service. When I try to connect to get the confirmation code for HP connected, this message appears

  "Unable to connect to the server.

  Check the Internet connection and try again. Or contact your system administrator or the person who set up the printer.
  If your network requires a proxy server address to connect to the Internet, click Proxy enter or check your browser settings. »

  I tried all of the suggestions posted in this post-

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile-printing-and-ePrintCenter/cannot-connect-to-se... - but none solved the problem.

  Apart from not using web services or filing a compliant under the terms of the UCC for the guarantee of marketability, what to do next?

  Hello RealGomer,

  Welcome to the Forums of HP Support!

  If I understand your message your Officejet 8100 is more connected to the Web Services and you have tried to assign a manual IP address of the printer.

  In the link you provided I have not seen any information about which server DNS has been used, because it is usually the cause / root of the problem, try to enter the DNS name of 8.8.8.8 & 8.8.4.4. To enter, you must be in the Web integrated to the network printer server.

  If this DNS information do not resolve, I'll get another for the DNS installation program.

  See you soon,.