Wireless Manager cannot connect to 3G T-Mobile provider

Similar Questions

• Portege M780 - 10G: Toshiba Wireless Manager cannot initialize the 3G device

  Hello

  by mistake I deleted connections used by the 3G device to connect broadband.

  Now when I run Toshiba Wireless Manager it attempt to initialize the device of wide band 3G but nothing happens.
  The laptop is a Toshiba Portege M780 10 G, 3G is an Ericrsson F3607gw and the operating system is Windows 7 Professional 32 bit.

  I tried to reinstall Toshiba Wireless Manager and the device 3G driver.

  Please, can you tell how to solve my problem?

  Thank you

  To be honest I don t understand how you could remove connections to broadband?
  However, you should check first if the 3G device is recognized in Device Manager correctly.
  If it is not recognized, this would require a 3G driver installation.

  All parts of the software can be found here:
  http://APS.toshiba-tro.de/WLAN/?page=3gdownloads

  Here you will find the description step by step how to set up and establish a 3G connection via the preinstalled Toshiba Wireless Manager?
  http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm

• Wireless laptop cannot connect to Photosmart C5180 printer on network

  I recently got a new computer, which is the main connection to our home network.  We have a laptop and a Photosmart C5180 printer.  I can't get the wireless laptop to connect to the printer, even though I have the shared printer on the pc.  I have the printer connected to the pc via a USB cable.

  I see the printer shared and available on the laptop, but get the error message when you try to print.

  Does anyone know what I'm missing that will allow me to print from wireless laptop?  It worked until I'm the new pc, so I know I'm missing something.  Should the laptop have both installed printer software/drivers?

  Yes, the printer directly connected to a router with an Ethernet cable will be the simplest solution.

  Yes, all computers will be able to access the printer on the network as long as they are connected to the same router (Ethernet or wireless, regardless).

  He shared from the computer and the printer connected to a computer with a USB cable are not a real printer on a network.  This creates what is essentially a print server and the computer with the USB connection manages the interaction of this printer with all the devices on the network.

  A USB connected printer sharing can be done, but it's a lot more work that the printer is connected to the router with an Ethernet cable.

  It's really a lot more work to set up the printer with a printer shared over a network connection USB method true when it comes to do this with Windows 7.

  Windows XP made it incredibly simple, but he was not very secure on a network.  With Windows XP, all you had to do was to share the printer, and then install it on another computer.

  With Windows 7 on both computers, you must configure a homegroup, enable file sharing and printers (disabled by default), share the printer and install the printer on the computer client / remote.  In addition, this method will require the host to be on anytime for remote printing machines.

  The printer is connected to the router with a Ethernet means that the functionality of the printer depends solely on the router being on (most are on 24/7).  Computers will print regardless of the other computer either on or off.  There should be a shorter time in the impression that a computer is responsible for printing rather than two computers.

  Again, I will be more than happy to help you set up with the method USB shared with two Windows 7 computers if that's what you want.  You find that it is much easier to use the Ethernet connected method to be simpler and more efficient to print well.

  If you want, here's a little more information from Microsoft on sharing a printer between two units of Windows 7.

  Setting up a homegroup

  Activate the file & printer sharingand sharing the printer on a Windows 7 computer

  As long as the printer & file sharing is enabled and two Windows 7 computers are in the same group of residential, you should be able to use the USB share method.  Without these two two options being Setup, it simply does not work with two Windows 7 systems.

• Adobe Connection Manager cannot connect to the Adobe servers

  Hello

  I found many sons of this topic, but not helped me to solve my problem.

  I have not used my app in a few months. A few weeks ago, I did it again and still get the message that my subscription cannot be verified because it is unable to connect to the Adobe servers. I started the Application Manager and get the same message there.

  I tried everything in this document: http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html all measures are successful and

  I tried to connect my laptop directly with the LAN cable to the modem, always without success

  I do not use proxies.

  I disabled my firewall and Antivirus, spyware, etc. applications, it always says that it cannot connect.

  I tried to download the Desktop Application, but also the message that it cannot connect to the servers.

  I really don't know what to check out more. I have no problem with secure sites or something else, that I use.

  Any suggestions that could be the problem?

  Note: it is said to set the clock correctly. What time does yone check against? My Windows is German, he CC is German, I'm in Germany and use the time zone correct. I often use the US formatted numbers and date formats, because I need it Hat way for work. I tried with the settings the Americans and the Germans, well. Makes no difference.

  Thank you!

  If you are a user and then select the hidden admin, restart and try to update/activate. Click here to find out how toggle hidden admin: http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista /

  If connected to the corporate network contact your IT Department to see if a Proxy Server or firewall does not block the activation.

  Thank you!

  Ankit

• Adobe Application Manager cannot connect :(

  Hi all

  Maybe someone will help me support is not

  I bought a new laptop running 64-bit Windows 8. Then I installed the following software to my creative cloud subscription:

  _ Lightroom, up and running fine

  _ Photoshop, installed in trial mode, as he could not connect, well, I thought it was a temporary bug and leave it in the trial.

  I couldn't update my final test software such that he asked to connect to the internet and enter the Adobe ID.

  After a long discussion with a technical support agent Adobe it me to Photoshop to uninstall and reinstall once more. 'Ideal' that I can't download now even Photoshop like Application Manager wonder Adobe ID at the beginning.

  After another verry long discussion with little support technical agents the only think that they can say this is probalbly a problem of language (Polish) and gave me local contact supports the team in Poland.

  I'll do it, but I'm sure that's not the source of the problem.

  For info:

  I'm not on a protected network, just a router and a DSL modem, even directly connected to DSL AAM cannot find internet connection. Even on a different network in a different place.

  Even with the firewall and antivirus off MAO doesn't work. There is nothing in hosts. I am borrowing the server licenses adobe as indicated by the agents.

  So everything works fine only shit AAM find a way to find my internet connection.

  Oh and for the final, a second computer connected to the same home network have the same creative cloud liscences running, updated and works well.

  So if anyone has an idea of what I need to do to not sue Adobe for 3 days lost to seek the solution I'll be happy to read it here

  I just can't work.

  M.

  Ufff it works! Technical support in Poland helped to get directions for a solution. Thank you!

  Now I explain how:

  Probably a process in Windows 8 blocks Adobe Application Manager that cannot connect to the internet.

  A quick solution is to create a new user account and install all software of this account, as the programs are shared you need not use all the days of the account.

  It is a solution for a while as each month what MAO will try to connect and check if your license is still in place.

  In the end, I have to check all the processes one by one and disable one who blocks the AAM, which will certainly take me a lot of time

  But for now I have a working software... Finally...

  How much money will I get Adobe for this tip for debugging? A discount will be welcome for 3 days lost here :/

• Wireless devices cannot connect to each other using the router EA6900

  I use the 2.4 Ghz network and none of my wireless devices are able to communicate with each other...  I could not connect to a wireless printer to my laptop wireless (through the router) and thought it was unusual.  I tried ping does not work either.  I then plugged a cable ethernet to the laptop and could ping the printer wireless without a problem.   I tried other devices (wired and wireless connections) and it seems that no wireless device can ping any other wireless device.  If, however, one of the devices is connected, it works fine...  All wireless devices to connect to the router and internet without problem... It's just when they try to communicate with each other.  I have experimented with the desktop using the ethernet adapter, then the wireless adapter... same results.  My wireless using my previous router devices could communicate with each other.  It's almost as if this device has insulated AP running if this so-called it doesn't support that.

  Customer service said: I'm the only one with this problem.  Does anyone else have this problem?

  I have an ea6900 and it works fine for me. Sounds almost like you are connected to the guest network which would be sort of this way. Did you do a power reset? It has never worked? Try to remove the power and back to see if it clears up it.

• Z10 blackBerry cannot connect to the network mobile/phone on Z10

  Please, I am unable to connect to the mobile network. cannot make or receive calls.

  whenever I restart the unit on Black berry z10, it resets the date and time of the year 2015 instead of the year 2016.

  It has been a challenge after that my camera has been upgraded to 10.3.2.2836

  Please I need your help

  As a last resort, I would use an autoloader to reload the operating system.  If this does not work after that then it is a hardware failure, or the device is not compatible with the networks in your area.  Assuming that this worked before and suddenly left leads me to believe that it's a hardware problem.

  http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...

• Wireless network cannot connect after sleep (X 200 tablet, win7)

  Hi all

  I've seen similar problems like this asked several times, but they have rarely been resolved and not by any means that I have not already tried, therefore this is.

  Immediately after starting, my wireless card works fine.  After that I put my computer to sleep then wake up, however, the wireless network adapter seems to fail.  It still detects networks, but when I try to log in, it takes a long time to connect, then says he can't.  If I wait a bit and try again, the same thing happens.

  This can be solved temporarily by one of these three methods:

  1 restart the computer.

  2 troubleshooting wireless network card (it resets the adapter each time and then it works).

  3. go to network and sharing Center-> adapter settings-> turn off, then turn on the wireless card.

  This problem is reproducible on EVERY sleep and on ANY wireless network (i.e. it is not a router problem).

  Solutions proposed that I already tried:

  1 reinstall/restore/update driver software.

  2. change the settings for the network adapter power management to not allow the computer to turn off the device to save energy.

  3. change the power management not to go in network adapter power saving mode.

  Entails disadvantages because I often need to turn my computer on sleep and access to the internet, and disabling + to reactivate the wireless network card takes time.  If someone managed to overcome a similar problem?

  Thank you.

  Hey ez910503,

  You can try to uninstall the software of dial-up connection and wireless drivers.

  Let windows install its generic wifi drivers and try again.

  curious to know what is the current version of the driver that you are using for your wifi card?

• HP Slimline 410-010 desktop: driver for my wireless card, cannot connect to WiFi

  I just reinstalled WIndows 7 Professional. I find all the drivers except for the wireless adapter, I can not connect WiFi, here is the card number. I searched and could not find the driver. Thanks for any help.  PCI\VEN_10EC & DEV_8179 & SUBSYS_804B103C & REV_01

  Hello:

  You need this driver...

  This package contains the installation package driver for the controller wireless LAN Realtek RTL8723BE/RTL8188EE in the laptop models running a supported operating system.

  File name: sp72932.exe

• Satellite T210-113 - Bluetooth cannot connect to Office communicator Mobile Windows

  Hello!

  For some reason that I can't connect my laptop Toshiba, which integrates the latest version of the Toshiba Bluetooth Stack and my Communicator with Windows Mobile 6.5

  The devices seem to get paired impeccable, but there is a mistake, they can't connect whenever I try to connect to another. Any suggestions on how to connect my devices?

  Moreover, the simple transfer of files between them works OK. It's when I'm trying to pair and connect devices I get this error

  Hello

  Here you can find a list of the different Bluetooth - how-to documents.
  http://APS2.toshiba-tro.de/Bluetooth/?page=HOWTO

  Is very interesting this HowTo:

  + How do I set up a connection from the PDA (Windows Mobile 6) to the Windows Mobile Device Center.
  http://APS2.toshiba-tro.de/KB0/HTD9602MY0000R01.htm

• Wireless clients cannot connect to the wired client

  So, I have a server connected to the router via Ethernet, a laptop computer connected by WiFi and desktop also connected via Ethernet. The laptop used to connect to the server, but all of a sudden it no longer, and yet the Office can always connect to the server.

  I have encountered this problem before and disable SIP ALG solved the problem, SIP ALG is always off and wireless isolation is disabled for all my wireless networks, in fact before the occurrence of the issue, no changes to the router configuration. I have also excluded the firewall of the server causing problems as the issue continues to perform with her at sea, even with the laptop because it is the same with any wireless client.

  I use the version of the firmware V1.0.0.90_1.0.90, my server is running CentOS 7 and my laptop and desktop running Windows 10 Pro.

  For anyone else having this problem: I solved by powercycling (power off, wait 10 seconds and turn back on) the router.

• M4 Aqua cannot connect on the T-Mobile network

  Hello all I'm new here
  Today, as I just bought a Sony Xperia M4 Aqua E2363 Dual SIM. But the problem is when I'm insterting the nano-sim after the process of restarting failed to connect on the network at all, when I go looking for networks, looming T-Mobile networks such as LTE (4 G) or 2-3... When I choose T-Mobile, regardless of the 2 G, 3 G or 4 G... After some means "could not connect to the network now. Please try again later ". So I'm pretty stuck without phone right now, when I went to APN settings everything is blank or empty, should I set everything to the network too?
  Is this a problem with the phone as a malfunction? or something the settings that messed up? Because if there's a failure, I can return it when is still under warranty... little help would be appreciated. A big thank you

  New update: today arrived my new M4 Aqua E2363 double and thank God, it works very well so far, I did call the network's comprehensive coverage, etc..

• Portege R700 Toshiba Wireless Manager

  Hi, I'm having a LOT of problems with my 3G connection via the Toshiba Wireless Manager. I have Windows 7 and version of the Wireless Manager program is CXP-901-4396/41 R3M03.
  The main problems are:
  -connection is failing all the time: it is connected, 5 minutes after it disconnects, and I have to log in again. Sometimes, I need to restart to be able to reconnect
  -very often, when you are connected, the BLUE SCREEN appears. crash the computer!

  This only happens when the Wireless Manager is connected. Without it, the PC work 100%!

  Help, please.

  SPM

  Hey,.

  I Don t Portege R700 in front of me but it's perhaps useful to s when you reinstall the Wireless Manager driver and 3 G. Before doing this, check if the latest version is available on the Web from Toshiba site, otherwise try to reinstall the same drivers.

  I hope it works :)

• TOSHIBA f3507g cannot connect to mobile broadband from 3G (error code 0)

  It's really a strange situation. Yesterday I installed the latest 3GRF POWER UTILITY and driver F3507g 3 G then inserted the SIM 3G, my laptop can connect to the internet (HSPA) normally, but today when I download and install the latest software WIRELESS MANAGER in others to check data and texting, but now my laptop cannot connect to the 3 G network but that laptop still the 3 G signal. I also tested for texting on my phone and it works but connect to the 3 G internet is impossible. I tried to uninstall all the drivers of 3G and reinstall it again, but it does not work. When I cheking troubleshooting, he said that "the operation of network connection mobile broadband failed with error 0". I use win7 and download the driver 3G [http://aps2.toshiba-tro.de/wlan/]. Please help me, thank you very much!

  Hello

  What operator and SIM are you using? It works if you connect through the Win7 built-in connection manager? That is to say through her view available networks?

  Since you are able to receive text Messages, you can register properly to the network. This should be a profile/network problem. It works if you create a manual Profile Manager wireless with the correct settings for your carrier?

  It works if you use square DUN? See Howto on http://aps2.toshiba-tro.de/kb0/HTD9802OF0000R01.htm

• Tecra R10-111: cannot install the Wireless Manager

  Hey guys,.

  don't know why, but when I install the Manager wireless on my Tecra R10-111 Wireless Manager can be started, but not a second later, the program ends. The only option I have is to accept and put an end to the program press OK.

  I have two versions of win7 on my laptop.

  1 is the original version of Toshiba Win7 OEM, who has been on the laptop.
  --> Here, it works without probs
  --> All updated etc.

  2. is it a full Version of Win7 bought and downloaded in a microsoft store.
  --> Here it doesn't work anymore!
  --> All updated etc.

  Earlier Versions of the Wireless Manager has worked in two partitions with Win Vista and for some time, I remember that he has worked with both versions of Win7.

  What is the problem with that? Toshiba has to provide updates and drivers that work with any version of Win7 and not only with the OEM Toshiba.

  Any suggestions?

  See you soon
  Australia

  > What is it with this? Toshiba has to provide updates and drivers that work with any version of Win7 and not only with the OEM Toshiba.

  Do you think that it is a problem of the tool?
  This seems to work on Toshiba pre-installed OS, so it cannot be a question of tool!

  Maybe a part of the software is missing on the MS Win 7 own

  Have you installed the update of Firmware for 3 G Module?
  This Firmware update is necessary to obtain more stability in your 3 G connection with your Ericsson 3 G module.

  Have you installed the registry patches that are available on the page of the Toshiba driver?
  Do this!

  Good luck